Power is the energy per unit time required to run a machine. The output power of the motor is 2590 W.
What is power?Power is the product of force and velocity with which an object is moving.
P = F x v
Given is the force 450N and the velocity is 5.675 m/s, then the power is
P = 450 x 5.75
P = 2587.5 Watt
The power output of the motor is approximately 2590 W.
Learn more about power.
https://brainly.com/question/19168410
#SPJ1
What is needed for water condensation to occur
Answer:
Warm moist air, hope this helps
Answer:
A heat source high enough to boil the water and the water itself
Explanation:
Inboard gasoline boats built after july 31st, 1981 must have what type of ventilation system?.
Inboard gasoline boats built after July 31st, 1981 must have a mechanical type of ventilation system.
What is a mechanical ventilation system?A mechanical ventilation system can be defined as a device in which circulates fresh/cold currents of air.
A mechanical ventilation system is based on the use of systems of ducts capable of ventilating the device.
In conclusion, inboard gasoline boats built after July 31st, 1981 must have a mechanical type of ventilation system.
Learn more about mechanical ventilation systems here:
https://brainly.com/question/17234224
#SPJ1
What happens when oxygen comes in contact with NOx and VOCs?
1. They combine to create ozone to replenish the ozone layer.
2. Oxygen neutralizes NOx and VOCs.
3. They combine to form low altitude ozone.
4. They combine to form smog.
When oxygen comes in contact with NOx and VOCs They combine to create ozone to replenish the ozone layer. Option A is correct.
What is an ozone layer?The layer form on the stratosphere region of the earth, which absorbs most of the ultraviolet rays.
The ultraviolet rays come from the sun are very harmful, increases global warming when enter inside the ozone layer due to its deplection.
When oxygen comes in contact with NOx and VOCs They combine to create ozone to replenish the ozone layer.
Hence, option A is correct.
To learn more about the ozone layer, refer to the link;
https://brainly.com/question/14330630
#SPJ1
What is the difference between
longitudinal waves that have
different amplitudes?
Answer:
Wave amplitude of a transverse wave is the difference of height between a crest and the resting position. Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is currently compressed by the wave.
Answer:
A wave caused by a disturbance with more energy has greater amplitude
Explanation:
A metal artifact with a mass of 814.0 lbs and a length of 6.25 ft is recovered from the Queen Anne's Revenge wreckage site. It is believed to be a cannon. Unfortunately, the base of the cannon was not recovered, so it is a perfectly symmetrical metal tube. The outer circumference is 23.9 inches and the inner diameter of the bore is 11.5 cm. In order to care for it properly, it must be determined what type of metal it is composed of. What is the artifacts density in g/cm3
Answer:
discovered as obisdan
Explanation:
me ginus brooo
What type of waves do not require a medium to travel?.
Answer:
electromagnetic waves
The half-life of radium-226 is 1,600 years and the half-life of carbon-14 is 5,730 years. In 1-2 sentences, mathematically prove that the decay constant for radium-226 is larger than the decay constant for carbon-14.
The decay constant for radium-226 is larger than the decay constant for carbon-14 due to its obtained value.
What is the rate of decay?
The reduction in the number of radionuclides per unit time is the rate of decay.
The decay constant of the radium-226 is;
[tex]\lambda_1=\frac{ 16}{100}\times 266 \\\\ \lambda_1= -36.16[/tex]
The decay constant of the carbon-14 is;
[tex]\lambda_2=\frac{ -57.3}{100}\times 14 \\\\ \lambda_1= -802.2[/tex]
Hence, the decay constant for radium-226 is larger than the decay constant for carbon-14.
To learn more about the rate of decay refer to the link;
https://brainly.com/question/14486631
#SPJ1
Answer:
0.693/1600 > 0.693/5730
Explanation:
The decay constant is the reciprocal of the time it takes for the radioactivity to decline to about 36.8% of its original value. It is the value of k in the multiplier e^(-kt), which tells the fraction remaining after time t.
When compared to the half-life, h, the value of k is ...
k = 0.693/h . . . . . decay constant for half-life h
Effectively, the decay constant is proportional to the inverse of the half-life. The constant of proportionality is ln(2) ≈ 0.693.
__
decay constant for radium-226:
0.693/1600 ≈ 4.33×10^-4
decay constant for carbon-14:
0.693/5730 ≈ 1.21×10^-4
Since 4.33×10^-4 is greater than 1.21×10^-4, the decay constant of radium-226 is larger than that of carbon-14.
_____
Additional comment
Taking the reciprocal of a positive number reverses the ordering:
1600 < 5730
1/1600 > 1/5730
The half-life of radium-226 is less than that of carbon-14, so its decay constant will be larger.
What is physics and how does it affect every day life
Explanation:
Physics, or the study of matter, energy, and the interactions between them, helps us to understand the laws and rules that govern the physical world.
When a ball rolls along the carpet, it slows down faster than when it is rolled on the floor. What transfer of energy explains this observation?
Answer:
D.) A carpet transfers more energy to heat than the floor.
The frictional force between carpet and ball is more due to the rough surface of the carpet as compared to the friction between floor and ball, so the ball on the carpet would come to rest first before a ball on the floor.
Explanation:
Have a great rest of your day
#TheWizzer
Question 7.
When can a mouse have the same momentum as an elephant?
د ن ه ه
A. when the mouse has a large velocity and the elephant has a small velocity
when the mouse has a small velocity and the elephant has a large velocity
a mouse cannot have the same momentum as an elephant
D. when they both have the same velocity
A mouse have the same momentum as an elephant when the mouse has a large velocity and the elephant has a small velocity. The correct option is A.
What is momentum?The momentum is the product of the mass of the object and its velocity.
Mouse has mass very less than the elephant. In order to make their momentum same, the velocity of the mouse must be greater than the elephant.
Mm x Vm = Me x Ve
A mouse have the same momentum as an elephant when the mouse has a large velocity and the elephant has a small velocity.
Thus, the correct option is A.
Learn more about momentum.
https://brainly.com/question/24030570
#SPJ1
After reading the passage about acupuncture, identify which scientific claim explains why some people say acupuncture does not truly relieve pain.
Answer:
The answer would be "This ancient form of pain relief and stimulation is said to benefit patients by blocking channels which practitioners claim
Explanation:
Answer:
It provides only a placebo effect.
Explanation:
Edge
the amount of energy at the end of the system (output) is different from the starting energy (input). How does this not violate (break) the law of the conservation of energy. This question is based on solar and wind energy
Answer:
Because some of the energy escaped or was used.
Explanation:
Which type of energy is most important when considering the heating and cooling of a building?
A. thermal energy
B. chemical energy
C. potential energy
D. electrical energy
Heating and cooling are the kind of energy. The most important energy when considering the heating and cooling of a building is thermal energy. The correct option is A.
What is energy?Energy is the ability to do work.
The temperature of building is increased or decreased due to the season changes. This heating or cooling is a type of energy related to thermal.
Thus, the most important energy when considering the heating and cooling of a building is thermal energy. The correct option is A.
Learn more about energy.
https://brainly.com/question/1932868
#SPJ1
what is the difference between reflection and refraction? What changes and what does not change.
Answer:
Reflection involves a change in direction of waves when they bounce off a barrier. Refraction of waves involves a change in the direction of waves as they pass from one medium to another.
Explanation:
what are the characteristics of images formed by plane mirrors
Answer:
the image is erectthe image is laterally invertedimage is formed at the same distance from the mirror as the object is in front of itthe image is of same size as that of the objectthe image is virtual (cannot be obtained on a screen)
DOES THE SUN CONTAIN NUCLEAR ENERGY?
Answer: yes
Explanation: it's fueled by nuclear reactions that fuse hydrogen atoms together into helium and other heavier elements, releasing huge amounts of energy in the process.
Any sound with a frequency that is too low for humans to hear is called:
Answer:
infrasound
Explanation:
3. The distance from a makeup mirror to C (the radius of curvature) is 70 cm. How far from the mirror
can a person be and still see an upright, magnified image?
The far point from the mirror can a person be and still see an upright, magnified image is focus i.e. 35cm from mirror.
What is radius of curvature?The mirror is made out of a sphere which has its radius called the radius of curvature.
The focal length f is half of the radius of curvature R of the lens.
Given the radius of curvature is 70cm, then focal length will be 70/2 = 35cm.
The makeup mirror is a concave mirror which forms real and upright images. The magnified images are obtained when the object is placed between focus and mirror.
Thus, the far point is focus i.e. 35cm from mirror.
Learn more about radius of curvature.
https://brainly.com/question/22714636
#SPJ1
A bag of frozen vegetables expanding in the microwave is a good example of how volume __________.
A. increases when temperature decreases
B. decreases when temperature increases
C. decreases when temperature decreases
D. increases when temperature increases
Answer:
D
Explanation:
because when the temperature increases things tend to rise and explode instead of decreasing
What happens when a sound wave passes by the particles of a medium?
Answer:
Propagation of Sound Waves:
Sound waves move (propagate) through a medium by means of particle-to-particle interaction. The source disturbs the immediately surrounding particles, causing them to vibrate about their fixed position at the same frequency as the source.
Calculate the power if work is 9000 joules and time is 60 seconds
Answer:
150w
Explanation:
power = workdone/time
9000/60
150w
2. why did adding layers of paper help prevent the egg from breaking open rather than one thick layer with the same number of sheets?
Question 12 A wave has a wavelength of 7.96 m and travels at 30.67 m/s. What is the frequency of the wave?
Answer:
0.2597hertz
Explanation:
first of all we have to calculate time.
time is given by speed/distance
hence=30.67/7.96
=3.85s
frequency is given by 1/time
=1/3.85
=0.2597hertz
Warren is a professional triathlete when doing an
Ironman, Warren swims 3.86km in 45 mins, then
bikes for 180.5 km in 5 hours and finishes by
running a marathon 42.2km in 2.75 hours. What is
Warren's average speed in Km/hr and m/s
Answer:26.7 and 7.4
Explanation:
So, first you add all the time up then the area travelled.
Firstly; 45 mins + 300 minutes(5 hours) + 165 minutes(2.75 minutes)= 510 minutes
Secondly; 42.2KM + 180.5KM + 3.86KM= 226.56KM
Finally: For hourly you would do: 510 divided by 60 to get 510 mins in terms of hours: so, 8.5 hours then you would do 226.56KM divided by 8.5 hours to get: 26.7Km/hr
For m/s: 7.4m/s
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
c because
Explanation:
Plants and trees couldn't thrive without capillary action. Capillary action helps bring water up into the roots. With the help of adhesion and cohesion, water can work it's way all the way up to the branches and leaves.
Answer:
option C
Explanation:
Capillary action is important because it's necessary thing in plants food and oxygen productionIt is done through capillary tubes of diameter 0.1mm and the water rises up high in the trees.So option C is correct
what is the wavelength of a 28Hz periodic wave at 10 meters per second?
AnswerAnswerAnswerAnswerAnswer:0.3571m
Explanation:
Calculate the frequency of a wave which goes through 10 cycles in 5 s
Which picture shows an example of no work being done? A man and a woman hold a child in the air by the child's hands. A man pushes a shopping cart down the aisle of a grocery store. A child holds the bar of a set of weights without moving. A woman pulls a rolling suitcase.
Answer:
A child holds the bar of a set of weights without moving I think
50 points physics question (multiple choice) Will give brainliest!
There are two systems that contain only the fundamental frequency and they are the systems C and D.
What is fundamental frequency?The term fundamental frequency refers to the lowest frequency of a vibrating body. It does not include the overtones or the harmonics.
From the image shown in the question, there are two systems that contain only the fundamental frequency and they are the systems C and D.
Learn more about fundamental frequency:https://brainly.com/question/9424813
#SPJ1
In a billiards game, one player hits the cue ball towards another ball. The cue ball has a mass of 0.1kg and hits the other ball with a velocity of 2m/s. If the collision is completely elastic and the cue ball travels with a velocity of 0.8m/s after the collision, what is the mass and velocity of the other ball?
Answer:
3/70 kg ≈ 0.04286 kg
2.8 m/s
Explanation:
In a perfectly elastic collision, the total momentum of the system is constant, and the difference in velocities changes sign.
We assume the other ball is at rest initially, and that the collision is "head-on." That is, final velocities are in the same direction as the initial velocity of the cue ball. We further assume no energy loss, and that the balls do not rotate.
__
initial momentumAssuming the ball being hit is initially at rest, it contributes no momentum to the system. The total momentum is ...
(0.1 kg)(2 m/s) = 0.2 kg·m/s
__
initial velocity differenceIf the cue ball has velocity v1 and the hit ball has velocity v2, the initial difference of velocities is ...
v1 -v2 = 2 m/s -0 m/s = 2 m/s
__
final velocity differenceAfter the collision, we must have ...
v1 -v2 = -2 m/s . . . . the velocity difference changes sign
v2 = v1 +2 m/s = 0.8 m/s +2 m/s
v2 = 2.8 m/s
The velocity of the other ball is 2.8 m/s after the collision.
__
mass of the other ballThe total momentum after the collision is the same as before, so we must have ...
m1·v1 +m2·v2 = initial momentum
(0.1 kg)(0.8 m/s) +(m2)(2.8 m/s) = 0.2 kg·m/s
m2 = (0.2 kg·m/s -0.08 kg·m/s)/(2.8 m/s) = (0.12/2.8) kg = 3/70 kg
The mass of the other ball is 3/70 ≈ 0.04286 kg.