A tank containing water up to a depth of 650 mm is stationary. Find the force exerted by fluid of specific gravity 0.55 on the side of tank, width of tank is 1.5m. Ρ water = 1000 kg/m³:

Answers

Answer 1

Answer:

3415.91 N

Explanation:

We know pressure, P at depth, h is P = ρgh where ρ = density of fluid = specific gravity × density of water = 0.55 × 1000 kg/m³ = 550 kg/m³, g = acceleration due to gravity = 9.8 m/s² and h = depth of water = 650 mm = 0.650 m

So, P = ρgh

= 550 kg/m³ × 9.8 m/s² × 0.650 m

= 3503.5 N/m²

Now pressure P = F/A where F = force on the side of tank and A = area of side of tank = depth of water × width of tank = 0.650 m × 1.5 m = 0.975 m²

So, F = PA

= 3503.5 N/m² × 0.975 m²

= 3415.913 N

≅ 3415.91 N


Related Questions

Select the correct answer.

Which situation will have the highest resistance?

А. long wire and high temperature

B. short wire and high temperature

C. long wire and cold temperature

D. short wire and low temperature

Answers

C it’s c hope you have a good one

describe the motion of the box as a result of the forces acting on it.
(picture cuts off right and left measurements- right is 100N, and left is 50N.)​

Answers

The box will move with net force =100-50=50N to the right side

LITERALLY HELP IMBEGGING YOU GUYS ANYONE IM NEEED HELP

Answers

Explanation:

The energy of a photon is given by :

[tex]E=\dfrac{hc}{\lambda}[/tex]

Where

h is Planck's constant

c is the speed of light

[tex]\lambda[/tex] is wavelength

or

[tex]E=hf[/tex], f is the frequency

Energy is directly proportional to the frequency of an object.

The energy transported by a wave is directly proportional to the square of the amplitude.

In the process of photosynthesis, how do plants obtain the water, carbon dioxide, and energy they use for this process?

Answers

Answer:

They get it from the air and soil. They also take energy from the sun.

Explanation:

During photosynthesis, plants take in carbon dioxide (CO2) and water (H2O) from the air and soil.

True or false? In a linear relationship, a change in one variable will always result in a change of the
same size in the other variable.

Answers

The statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.

What is a linear relationship?

A linear relationship is a type of association between two variables where a change in one produces a direct modification in the another one.

A linear relationship may change depending on the rate of change and therefore the size of this variation is not the same.

In conclusion, the statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.

Learn more about linear relationships here:

https://brainly.com/question/6691346

#SPJ1

A 10cm3 sample of copper has a density of 897g/cm3. What is the mass of the sample?

Answers

Question:-

A 10cm³ sample of copper has a density of 897g/cm³. What is the mass of the sample ?

Answer:-

Given:-

Density of sample of copper is 897g/cm³.

Volume of sample of copper is 10cm³.

To Find:-

The mass of the sample.

Solution:-

We know,

[tex] { \boxed{\bf{\rm \red {Mass \: = \: Density \: × \: Volume}}}} [/tex]

So, Mass = 897g/cm³ × 10cm³

Mass = 8970 g

The mass of the sample is 8970 g. [Answer]

doing work alawyas means blank energy​

Answers

Answer:

Transferring energy

Explanation:

Doing work always mean Transferring energy.

After rubbing a rubber brush on wool, Gilbert is able to use the brush to pick up small strips of paper. What causes the paper to be attracted to the brush?
A.) gravity
B.)electric current
C.) static electricity
D.)magnetism

Answers

Static electricity because when you rub something against a surface, there is friction aka static electricity.

After rubbing the a rubber brush on the wool it gets a charge acquired by the passage of electrons. The electrons from the wools escapes to the brush and thus the paper get attracted to electrons in the brush. Hence, option B is correct.

What is electric current?

Electric current is the passage of electrons from the negative end to positive end of a  potential difference.

When a an object is rubbed on a conducting material it gets some electrons into it.  When this material comes in contact with another object which have random distribution of charges will attracts the electrons by its positive end.

The rubber brush gets negatively charged on rubbing.  Paper have positive and negative charges in random. When it comes in contact with the negatively charged brush the electrons in the paper repelled away.

The positive charges thus accumulates on the other end of the paper and attracted to the brush. This is an example of static current. Hence option B is correct.

To find more about static current, refer the link below:

https://brainly.com/question/17028207

#SPJ2

Given equal time periods, which statement about radioactive waste is correct?
A. Radioactive decay and nuclear fission always generate the same amount of waste.
B. Nuclear fusion generates less radioactive waste than radioactive decay does.
C. Nuclear fusion generates less radioactive waste than nuclear fission does.
D. Nuclear fission generates less radioactive waste than radioactive decay does.

Answers

I think the answer is C

A load uses a current of 5.0 A when it is attached to a 20 V source. What is the resistance of the load?

Answers

Answer: 4.0 ohm

Explanation:

How much force required to prevent a book from falling if the mass of the book is 50 grams?

Answers

Answer:

The gravitational force on a mass is its weight. We can write this in vector form, where  

w

is weight and m is mass, as

w

=

m

g

.

In scalar form, we can write

w

=

m

g

.

Since  

g

=

9.80

m/s

2

on Earth, the weight of a 1.00-kg object on Earth is 9.80 N:

w

=

m

g

=

(

1.00

kg

)

(

9.80

m/s

2

)

=

9.80

N

Explanation:

Mental health disorders may NOT affect...
O
A person's motivation levels
O
The ability to make decisions
о
A person's memory or ability to make new memories
A person's ability to breathe

Answers

In my opinion, mental health can affect all of these options. However, I think the answer this is looking for would be "A person's ability to breathe"

Mental health definitely affects motivation; and motivation affects mental health. Motivation is a driving force behind human behaviours; its absence can lead to mental illnesses such as depression. Often when someone is depressed, they lack the motivation to do things.

Mental health can affect decision making as well- for example, if someone has anxiety, decision-making can be harder. Anxiety disrupts the decision-making regions in the prefrontal cortex.

Mental health can also affect memory- Depression has been linked to memory problems, such as forgetfulness. Depression is associated with short-term memory loss. Stress and anxiety can also lead to poor memory.

I would say that panic attacks can inhibit a person from breathing, but considering the options I would say that's the best one. Breathing is more of a physical thing, not associated with the brain or mental condition. So the answer is A person's ability to breathe.

Which changes in surface water movement are likely
to occur when vegetation is removed from the side of
a hill?
A) infiltration decreases and runoff decreases
B) infiltration decreases and runoff increases
C) infiltration increases and runoff decreases
D) infiltration increases and runoff increases

Answers

Answer:

infiltration decreases and runoff increase

Explanation:

The changes in surface water movement which is likely to occur when vegetation is removed from the side of a hill is infiltration decreases and runoff increases.

What is surface overflow?

Surface overflow is the flow of water which take place on the surface of the ground. The extra water due to rain or flood arises on the ground or at the surface, flows in the nearby lacks or ponds.

Now if the vegetation is removed, great amount of water started to come from the hills. The result of it, more water started to overflow on the land of the surface. This way the runoff increases.

Infiltration is the way by which the ground level water enters into the soil of the earth.

Now, if the vegetation is removed, a lot of amounts of water started to come from the hills. This excess amount of water does not enter in to the soil of the earth.

The changes in surface water movement which is likely to occur when vegetation is removed from the side of a hill is infiltration decreases and runoff increases.

Learn more about the Infiltration here;

https://brainly.com/question/15362770

How was our galaxy formed?

Answers

Answer:

according to big bang theory our galaxy was formed 13billion years ago and then made the stars and galaxies we see today. ... The universe began as a very hot, small, and dense superforce (the mix of the four fundamental forces), with no stars, atoms, form, or structure (called a "singularity).

The half-life of Cs-137 is 30.2 years. If the initial mass of the sample is 1.00 kg, how much will remain after 151 years?
A.There will be 0.062 kg left after 151 years.
B.There will be 2.000 kg left after 151 years.
C.There will be 0.031 kg left after 151 years.
D.There will be 0.500 kg left after 151 years.

Answers

Answer:can someone help

Explanation:


This parallel circuit has three resistors R1-120 ohm; R2-45 ohm: R3=360
ohm and a power source of 240 volts.. Find the total resistance of the
circuit.
O 2.491 ohm
O 1.382 ohm
O 0.582 ohm
O 0.033 ohm

Answers

Answer:

the answer is 30 Ohms. Not found in the options provided

The small piston of a hydraulic lift has an area of 0.20 m2. A car weighing 1200 N sits on a rack mounted on the large piston. The large piston has an area of 0.90 m2. What is the mechanical advantage of the hydraulic lift?

Answers

Answer:

4.5

Explanation:

Given the following

Weight of the car = 1200N (Load)

Let us get the effort by using the formula;

F1/A1 = F2/A2

Substitute the given values

1200/0.9 = F2/0.2

Cross multiply

0.9F2 = 1200 * 0.2

0.9F2 = 240

F2 = 240/0.9

F2 = 266.67N

Hence the effort is 266.67N

Mechanical Advntage = Load/Effort

MA = 1200/266.67

MA = 4.5

Hence he mechanical advantage of the hydraulic lift is 4.5

A magnet can generate an electric current in a wire if the magnet is close enough to the wire and if the magnet is also
A.)strong
B.)weak.
C.)at rest.
D.)in motion.

Answers

Answer:a stro

Explanation:

A magnet can generate an electric current in a wire if the magnet is close enough to the wire and if the magnet is also in motion. The correct answer is D) in motion.

What is electromagnetic induction?

When a magnetic field is in motion with respect to a conductor, such as a wire, it induces an electric current in the wire. This is because the changing magnetic field creates a changing electric field around the wire, which causes electrons to flow. The induced electric current is proportional to the rate of change of the magnetic field. This consequence is known as electromagnetic induction.

The strength of the magnetic field does affect the magnitude of the induced electric current, but the magnetic field must be in motion in order to generate an electric current.

A weak magnetic field can still generate an electric current in a wire if it is in motion with respect to the wire.

If a magnetic field is at rest, it will not induce an electric current in a wire. The magnetic field must be in motion in order to generate an electric current.

Thus, the correct answer is D) in motion.

Learn more about electromagnetic induction here:

https://brainly.com/question/1305957

#SPJ6

what is th resistance force when you walk up an inclined plane?

Answers

Explanation:

Friction is a force that offers resistance to movement when one object is in contact with another

Answer:

Friction is a force.

Explanation:

Have a wonderful day.

How many cups of water should you drink in a day?

Answers

Answer:

about 2.7liters for women and 3.7liters for men

Explanation:

what is the line that joins northen and southren hemisphere of the earth is called a

Answers

The line is called equator.

How are radio waves modified to send information?

Answers

Answer:

Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.

Explanation:

Hope this helped!!!

what are the objectives of the tourist for visiting Nepal write in points​

Answers

Answer:

The objectives of the tourist for visiting Nepal are .

It is naturally decorative .Highest mountain ️ of the world mt.everest is situated in Nepal .many rivers are there for rafting .different types of land and climate can be found .many historical , religious and cultural site are present here to visit .

hope it is helpful to you ☺️

In this system, ___________________ energy from the sunlight causes the solar panel to create ___________________ energy which flows into the incandescent light bulb. In the light bulb, the ___________________ energy is transformed into two different types of energy: ___________________ energy and ___________________ energy.

Answers

Answer:

solar, heat,heat, light


A positive charge moving with a constant velocity v enters a region
of a uniform magnetic field pointing to the top of the page. What
is the direction of the magnetic force on the charge?
A. Left.
B. Right.
C. To the bottom of the page.
D. To the t&p of the page.
E. There is no magnetic force on the charge.

Answers

answer is Answer is E , using the right hand rule

Find the Y component of 35m/s at 57 degrees from the X-axis.

Answers

Answer:

35m/s[57o].

X = 35*Cos57 =

Y = 35*sin7 =Explanation:

learn man but there u go

The Y component of the velocity 35 m/s is 29.35 m/s.

What is a projectile?

A projectile can be defined as an object upon which experiences only force is gravity. The projectile covers the path with a parabolic trajectory because of the effect of gravity. No horizontal forces act upon projectiles which causes no horizontal acceleration.

The velocity of a projectile is divided into two components one is the horizontal component and the other is the vertical component.

If the projectile makes an angle θ with the X- axis.

The vertical component of the velocity, Vy = Vsinθ

The horizontal component of the velocity, Vx = Vcosθ

Given the angle θ with the X- axis = 57°

The velocity of the projectile V = 35 m/s

Then the vertical or Y component of the velocity, Vy = Vsinθ =

Y component = 35× sin 57°

Vy = 29.35 m/s

Learn more about the projectile's velocity components, here:

brainly.com/question/14478315

#SPJ2

Describe the three methods of thermal energy transfer and provide a sketch that depicts each:
Conduction:
Convection:
Radiation:

Answers

Answer:

a)the process by which heat or electricity is directly transmitted through the material of a substance when there is a difference of temperature

b)the movement caused within a fluid by the tendency of hotter and therefore less dense material to rise, and colder, denser material to sink under the influence of gravity, which consequently results in transfer of heat

c)radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium.

As distance increases, gravitational force________

Answers

Answer:

Decreases

Explanation:

Answer:

Decreases

ExplanatIon:

GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 25pts-

Answers

Answer:

mechanic and potential?

Explanation:

I comment so u can give her brainliest

Can someone help me with this science one please

Answers

I AM MEMELORD!!!!! SLAYER OF THE KARENS!!! SPEAKER OF THE THE MEMES. APPROACH SPEAKER AND ASK YOUR QUESTION!
Other Questions
25m45mHelp pls......... How far away is a thunderstorm if it takes 3 seconds for sound to be heard? The air temperature is 23 degrees Celsius . Which of the following is not made of DNA?O chromatidsO chromosomescentromeresO chromatin This is my last question by the way An account is open with initial deposit of $5500 and earn 2.5% interest compounded annually. What will the account be worth in 10 years a plumber charges $15 for a service call plus $20 per hour of service. Write an equation in slope-intercept form for the cost, y, after x hours of service. What will be the total cost for 8 hours of work? According to the data, which part is described by the letter K? aconstellation bgalaxy cmeteoroid dplanet A uniform 40-N board supports two children weighing 500 N and 350 N. If the support is at the center of the board and the 500-N child is 1.5 m from its center, How far is the 350-N child from the centerDetermine the upward force exerted on the board? Please help me with this math question lol Am I right? If you don't know, it's okay, but don't answer. I need someone that could help. Both East and West block's face similar economic problems in the 1970s, yet communism collapsed in the East and capitalism recovered. How do you account for the difference? Were economics problems the main basis for popular opposition to communism? The fossil record indicates that in some cases reasonably well-defined species appear suddenly and remain unchanged for a long time before they become extinct. This phenomenon is referred to as In the month of March, Baldwin corporation received orders of 169 units at a price of $15 for the product boat. Baldwin uses the accrual method of accounting and offers 30 day credit terms. Baldwin delivers 112 units in March and the balance of 56 units in April. They receive payments of 56 units in March, 56 units in April, and 56 units in May. How much revenue is recognized on the March income statement from this order how much 1Aaron participated in a 45-mile bikeathon to raise money for his favorite charity. The table shows Aaron's times at the beginning and end of the ride.(a)Time (hours)oDistance (kilometers)03.645Part AWhat is Aaron's average biking speed in kilometers per hour?kilometers per hourAPROk Determine the slope and y-intercept of the line.y = -69x - 346 which causes led to the industrial revolution in england? hi i really need help Please help I have to get my grades up What is 3% of 1700Can you please explain the method please What is a disadvantage of merging cells? Merging cells combines formatting styles. Once cells are merged the process cannot be reversed. Multiple cells can be combined into one reference. Data functions in multiple cells may not be recognized.