A vessel at rest at the origin of an xy coordinate system explodes into three pieces. Just after the explosion, one piece, of mass m, moves with velocity (-21 m/s) and a second piece, also of mass m, moves with velocity (-21 m/s) . The third piece has mass 3m. Just after the explosion, what are the (a) magnitude and (b) direction (as an angle relative to the x axis) of the velocity of the third piece

Answer:

In a series circuits, the current can flow through only one path from start to finish - accurately describes circuits.

Answer:

It is a series circuit, the current can flow through only one path from start to finish - accurately describes circuits.

Explanation:

I don't know the option but it is also the correct one.

I don't know

because I don't know

Answer:

[tex]s = ut + \frac{1}{2} g {t}^{2} \\ t(u + \frac{1}{2} gt) = H \\ u + \frac{1}{2} gt = H \\ t = 2(H - u) \div g \\ t = \frac{(H - u)}{5} \\ u \: is \: speed \: or \: velocity[/tex]

Answer:

12

Explanation:

I'm a beginner so am not sureeeeee

Answer:

Yes the tile can withstand a force 5 N

Explanation:

We'll begin by converting the dimensions from cm to in. This can be obtained as follow:

Dimension = 50 cm x 50cm

Recall

2.54 cm = 1 in

Therefore,

50 cm = 50 cm × 1 in / 2.54 cm

50 cm = 19.685 in

Thus, the dimension becomes:

Dimension = 19.685 in × 19.685 in

Next, we shall determine the area. This can be obtained as follow:

Dimension = 19.685 in × 19.685 in

Area = 19.685 in × 19.685 in

Area = 387.5 in²

Next, we shall determine the force to which the tile can withstand. This can be obtained as follow:

Pressure (P) = 40 N/in²

Area (A) = 387.5 in²

Force (F) =?

P = F/A

40 = F/387.5

Cross multiply

F = 40 × 387.5

F = 15500 N

Thus, the tile can withstand a force up to 15500 N.

Therefore, the answer to the question is:

Yes the tile can withstand a force 5 N

Answer:

C

Explanation:

Because they both received the same temperature

Answer:

The frictional force required for the car to travel is 8,365.01 N

Explanation:

Given;

mass of the car, m = 1600 kg

radius of the curved road, r = 71 m

banking angle, θ = 15⁰

velocity of the car, v = 86 km/h = 86/3.6 = 23.89 m/s

The two forces acting on the are:

1.  the parallel force to the banked plane

2. the centripetal force pushing the car up the banked plane

To keep the car traveling at 86 km/h;

frictional force + parallel force to the plane = centripetal force pushing the car up the banked plane

The parallel force to the banked plane:

F = mgsinθ

F = 1600 x 9.8 x sin(15⁰)

F = 4,057.98 N

The centripetal force pushing the car up the banked plane:

[tex]F_c= (\frac{mv^2}{r} )cos(\theta)\\\\F_c = (\frac{1600 \times 23.89^2}{71} )cos(15^0)\\\\F_c = 12,422.99 \ N[/tex]

The frictional force required for the car to travel:

[tex]F_k = F_c - F\\\\F_k = 12,422.99 \ N - 4,057.98 \ N\\\\F_k = 8,365.01 \ N[/tex]

Therefore, the frictional force required for the car to travel is 8,365.01 N

Answer:

nonmental

Explanation:

Option B is correct. The substance floats and reacts violently with the water. Based on this Information, metal is the unknown substance.

A metal, a glossy substance that transmits electricity and heat reasonably efficiently when newly manufactured, polished, or broken.

Metals are either malleable or ductile. Metals can be chemical elements like iron.

Metal is  substance floats and reacts violently with the water. When particles collide, energy is transferred. A change in temperature can be used to identify this.

The substance floats and reacts violently with the water. Based on this Information, metal is the unknown substance.

Hence, option B is correct.

To learn more about metal, refer to the link;

https://brainly.com/question/18153051

#SPJ2

by an echo meter

please flw me and thank my answers

#Genius kudi

Answer:

[tex]\mu_w=86\%[/tex]

Explanation:

From the question we are told that:

Velocity on Dry road [tex]V_d=10m/s[/tex]

Radius Dry [tex]r_d=4.8[/tex]

Radius wet [tex]r_w=11.8[/tex]

Generally the equation for coefficient of static friction on the dry day is mathematically given by

[tex]\mu mg=\frac{mv^2}{r_d}[/tex]

[tex]\mu g=\frac{v^2}{r_d}[/tex]

[tex]\mu_d 9.8=\frac{10^2}{4.8}[/tex]

[tex]\mu_d=2.125[/tex]

Generally the equation for the relationship between Radius & coefficient of static friction is mathematically given by

[tex]\frac{\mu_d}{\mu_w}=\frac{r_d}{r_w}[/tex]

[tex]\frac{\mu_w}{2.125}=\frac{4.8}{11.8}[/tex]

[tex]\mu_w=0.86[/tex]

Therefore

[tex]\mu_w=86\%[/tex]

Answer:

here is ur answer...

Explanation:

gravity .......is ur answer

and the value of D is DE³S NU + s

An attractive force that exist between all object with mass attract another objects the magnitude of the force is directly proportional..

Hope this help!

Answer:

Potential energy. Releasing it, the potential energy would convert into motion, kinetic energy.

Potential energy is when an object has some sort of potential eg. for motion such as in this example.

Answer:

A. Potential energy

Explanation:

Potential energy can be thought of as stored energy, which has the potential of becoming kinetic energy once it has been released.

Answer:

120 Newton

Explanation:

Given the following data;

Mass = 12 kg

Angle = 4°

We know that acceleration due to gravity is equal to 10 m/s

To find the minimum force to stop the block from sliding;

Force = mgCos(d)

Where;

m is the mass of an object.

g is the acceleration due to gravity.

d is the angle of inclination (theta).

Substituting into the formula we have;

F = 12*10*Cos(4°)

F = 120 * 0.9976

F = 119.71 ≈ 120 Newton

Explanation:

i) center of gravity (or mass)

ii) m = W/g = (160 N)/(9.8 m/s^2)

= 16.3 kg

Answer:

Anytime it feels the force of gravity.

Explanation:

Gravity is considered to be a universal force of attraction which acts between all objects that has both mass, energy and can occupy space. Therefore, it acts in such a way as to bring objects together i.e causing the objects to fall down towards the Earth.

This ultimately implies that, an object is in free fall anytime it feels the force of gravity i.e regardless of how fast the object moves or the direction it moves, the only force acting on the object is the force of gravity (g).

For example, when you throw any object up, it will naturally fall down due to the gravitational force between the Earth and the object.

Additionally, the gravity of earth makes it possible for all physical objects to possess weight.

On planet Earth, the acceleration due to gravity that all physical objects experience is 9.8 meters per seconds square.

Answer:

A B C

Explanation:just took the test

Answer:

Komal could have mixed up the labels on the vials.

Someone might have jiggled the table and made the water surface tension bubble spill over.

The water could actually have been saltwater instead of pure water.

Explanation:

...........................

Answer:

Newton's law of cooling says that the temperature of a body changes at a rate proportional to the difference between its temperature and that of the surrounding medium (the ambient temperature); dT/dt = -K(T - Tₐ) where T = the temperature of the body (°C), t = time (min), k = the proportionality constant (per minute),

Explanation:

a. The athlete's velocity just before reaching the pad is [tex]35.21m/s[/tex]

b. The constant force exerted on the pole vaulter is 6799.52 N

a. We use Newton's equation of motion,

                    [tex]v=u+at\\\\S=ut+\frac{1}{2}at^{2}[/tex]

Where u is initial velocity, v is final velocity, a is acceleration , t is time and S represent distance.

Given that,  s = 5.1 m , t = 0.29s, u = 0

Substitute in above equation.

            [tex]5.1=\frac{1}{2}*a*(0.29)^{2} \\\\a=\frac{5.1*2}{0.084}=121.42m/s^{2}[/tex]

the athlete's velocity, [tex]v=0+121.42*(0.29)=35.21m/s[/tex]

b. The constant force exerted on the pole vaulter due to the collision is given as,             [tex]Force=mass*acceleration[/tex]

             [tex]Force=56*121.42=6799.52N[/tex]

Learn more:

https://brainly.com/question/13532462

Answer:

24 m

Explanation:

By applying the law of conservation of energy.

K.E = P.E

[tex]\dfrac{1}{2}kx^2 = mgh[/tex]

By rearrangement;

[tex]\dfrac{k}{m} = \dfrac{2*g*h}{x^2}[/tex]

where;

k = spring constant

m = mass of pebble

h = height reached

x = stretched length

[tex]\dfrac{k}{m} = \dfrac{2*9.8*6}{(20 \times 10^{-2})^2}[/tex]

[tex]\dfrac{k}{m} =0.2940 \times 10^4[/tex]

Since the drag force is negligible;

[tex]\dfrac{1}{2}kx^2 = mgh[/tex]

[tex]h = \dfrac{k}{m}\dfrac{x^2}{g}[/tex]

[tex]h = \dfrac{1}{2}\times 0.2940 \times 10^4 \times \dfrac{(40\times 10^{-2})^2}{9.8}[/tex]

h = 24 m

Answer:

c) 2.02 x 10^16 nuclei

Explanation:

The isotope decay of an atom follows the equation:

ln[A] = -kt + ln[A]₀

Where [A] is the amount of the isotope after time t, k is decay constant, [A]₀ is the initial amount of the isotope

[A] = Our incognite

k is constant decay:

k = ln 2 / Half-life

k = ln 2 / 4.96 x 10^3 s

k = 1.40x10⁻⁴s⁻¹

t is time = 1.98 x 10^4 s

[A]₀ = 3.21 x 10^17 nuclei

ln[A] = -1.40x10⁻⁴s⁻¹*1.98 x 10^4 s + ln[3.21 x 10^17 nuclei]

ln[A] = 37.538

[A] = 2.01x10¹⁶ nuclei remain ≈

Answer:

The distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]

Explanation:

This deceleration situation can be analyzed by means of Work-Energy Theorem, where change in translational kinetic energy is equal to the work done by friction:

[tex]\frac{1}{2}\cdot m\cdot v^{2}-\mu\cdot m\cdot g \cdot s = 0[/tex] (1)

Where:

[tex]m[/tex] - Mass of the car, in kilogram.

[tex]v[/tex] - Initial velocity, in meters per second.

[tex]\mu[/tex] - Coefficient of friction, no unit.

[tex]s[/tex] - Travelled distance, in meters.

Then we derive an expression for the distance travelled by the vehicle:

[tex]\frac{1}{2}\cdot v^{2} = \mu \cdot g \cdot s[/tex]

[tex]s = \frac{v^{2}}{\mu\cdot g}[/tex]

As we notice, the distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]

Explanation:

Answer:At any instant, the object's kinetic energy is (5) x (its speed in meters per second)2 .

Answer:

V = 2.58 m/s

Explanation:

Below is the calculation:

Given the weight of Erica = 37 kg

The weight of Danny = 45 kg

Danny's speed to move upward = 4.7 m/s

Use below formula to find the answer.

m1 * u1 = (m1+m2) * V

V = m1*u1 / (m1+m2)

Here, m1 = 45

u1 = 4.7

m1 = 45

m2 = 37

Now plug the values in formula:

V = m1*u1 / (m1+m2)

V = (45*4.7)/(45+37)

V = 2.58 m/s

Answer:

The magnitude of the acceleration of the car is 35.53 m/s²

Explanation:

Given;

acceleration of the truck, [tex]a_t[/tex] = 12.7 m/s²

mass of the truck, [tex]m_t[/tex] = 2490 kg

mass of the car, [tex]m_c[/tex] = 890 kg

let the acceleration of the car at the moment they collided = [tex]a_c[/tex]

Apply Newton's third law of motion;

Magnitude of force exerted by the truck = Magnitude of force exerted by the car.

The force exerted by the car occurs in the opposite direction.

[tex]F_c = -F_t\\\\m_ca_c = -m_t a_t\\\\a_c =- \frac{m_ta_t}{m_c} \\\\a_c = -\frac{2490 \times 12.7}{890} \\\\a_c = - 35.53 \ m/s^2[/tex]

Therefore, the magnitude of the acceleration of the car is 35.53 m/s²

Answer:

The magnitude of the acceleration of the car is 35.53 m/s²

Explanation:

Given;

acceleration of the truck, = 12.7 m/s²

mass of the truck, = 2490 kg

mass of the car, = 890 kg

let the acceleration of the car at the moment they collided =

Apply Newton's third law of motion;

Magnitude of force exerted by the truck = Magnitude of force exerted by the car.

The force exerted by the car occurs in the opposite direction.

Therefore, the magnitude of the acceleration of the car is 35.53 m/s²

Answer:

NO CLUE

Explanation:

GOOD LUCK THOUGH

According to the Newton's second law :- The acceleration of an object is directly related to the net force and inversely related to its mass. Acceleration of an object depends on two things, force and mass.

Answer:

Formula

P = I x V

Information

V = 230

A = 3

P = x

Calculation

x = 230 x 3

x = 690 W

Explanation:

hope it is helpful for you

mark me brainlist

Answer:

(c) at rest

Explanation:

Given

See attachment for the distance time graph

Required

What does the graph illustrate?

From the graph, we can see that the line of distance is a horizontal line.

This suggests that a time increases, the distance remains unchanged

When distance remains unchanged over time, then it means the object is at rest.

Hence, (c) is correct