at stp what is the volume of 5.35 moles of methane ch4​

Answer:

1. Broadly, there are three different methods for how electricity is generated in the United States. They include; Fossil fuels, Nuclear energy, and Renewable energy sources.

2. Fossil fuels, are used the most, with Natural gas topping the list by 38%.

3. More should be invested into renewable gas. It is a clean source of energy and investing in it would bring about a cleaner and safer environment.

Explanation:

Fossil fuels arise from plants and animals that have been long dead and can can now be converted to sources of energy. Examples include; coal natural gas, crude oil. etc.  

Nuclear energy arises from the fission of uranium atoms, nuclear decay, and nuclear fusion. They are safe since green house gases are not emitted. Thermal energy can be generated as the byproduct of these reactions.

Renewable sources of energy are generated from natural sources which are always available. Examples are; sun, wind, biomass, water, and geothermal sources,

Answer:

I think C but it could be D

Explanation:

I would say go for C

Answer:

If the reaction requires energy, it is often indicated above the arrow. A capital Greek letter delta (Δ) is written on top of the reaction arrow to show that energy in the form of heat is added to the reaction; hv is written if the energy is added in the form of light.

Answer:

it means that to get the product, the reactants were heated

Answer:

you didnt show a picture, but if it just exposed then it will probably be a physical change

Explanation:

An empirical shows the simplest ratio among atoms in a compound .

Answer:

Radio wave

Explanation:

Radio waves are a type of electromagnetic wave radiation with wavelengths in the electromagnetic spectrum longer than infrared light

A seismic wave is an elastic wave generated by an impulse such as an earthquake or an explosion.

Sound and water waves are mechanical waves; meaning, they require a medium to travel through.

Answer:

When our tear film becomes unstable, symptoms of Dry Eye can occur. OUR TEAR FILM HAS THREE LAYERS. Our tear film is made up of three layers – an oil (lipid) layer, a water (aqueous) layer and a mucin layer. ... Its main purpose is to seal the tear film which helps reduce evaporation of our natural tears.

Answer:

The dolphins average speed is 3.51 [tex]\frac{meters}{seconds}[/tex]

Explanation:

First of all, the following rules of three should be applied:

[tex]distance=\frac{20 miles*1609 meters}{1 mile}[/tex]

distance=32,180 meters

[tex]time=\frac{153 minutes*60 seconds}{1 minute}[/tex]

time= 9,180 seconds

Speed ​​is a physical quantity that expresses the relationship between the space traveled by an object and the time used for it. That is, speed implies the change of position of an object in space within a certain amount of time and is calculated as:

[tex]speed=\frac{distance}{time}[/tex]

So in this case the velocity is calculated as:

[tex]speed=\frac{32,180 meters}{9,180 seconds}[/tex]

Solving, you get:

Speed= 3.51 [tex]\frac{meters}{seconds}[/tex]

The dolphins average speed is 3.51 [tex]\frac{meters}{seconds}[/tex]

Answer:

The object has to move a distance when a force is applied to it

Explanation:

For work to be done on a body the force applied must move the body through a particular distance.

  Work done  = Force x distance  

If no distance is moved by the force, no work is done.

Also, the angle between the force and the distance must be 0 to do the maximum work on the body.

Answer:

13 moles of oxygen

Explanation:

A mole of a substance is the unit of measuring the number of particles within a chemical substance.

The given compound is:

      Ca₅ (PO₄)₃OH

This is a mole of   Ca₅ (PO₄)₃OH

  In this compound we have:

  5 moles of Ca

  3 mole of P

   13 mole of O

   1 mole of H

So,

  In 1 mole of  Ca₅ (PO₄)₃OH, we have 13 moles of oxygen

Answer:

there are 12 hydrogen atoms in 2 molecules of C3H6

Explanation:

Answer:

A

Explanation:

Answer:

a, u cannot bend rocks

Explanation:

........yjmumtwjmyjy

Answer:  The correct answer is:  " 0.54 g " .

__________________________________________

Explanation:

Note that "hydrogen gas" is:  

H₂ (g)  ;   that is:  a "diatomic element" (diatomic gas) ;

_________________________________________

The molecular weight of "H" is:  1.00794 g ;

   (From the Periodic Table of Elements).

So, the molecular weight of:  H₂ (g)  is:

    " 1.00794 g * 2  = 2.01588 g ; {use calculator) ;

_________________________________________

Note the conversion for a gas at STP:

______

  1 mol of a gas = 22.4 L gas;

___

i.e. " 1 mol / 22.4 L " ;

____

So:     " 5.7 L H₂ (g)  [tex]* \frac{1 mol H_{2} }{22.4 L} *\frac{2.01588 g}{mol} =? ;[/tex]

The "L" ("literes" cancel out to "1" ;  since "L/L = 1 ;

The "mol" (moles) cancel out to "1" ; since "mol/mol = 1 ;

____

and we are left with:

____

 [5.7 * 2.104588 g ] / 22.4  =  ?  g ;

______________________

→ [ 11.9961516  g ] / 22.4 =

          0.53554248214  g ;l

_____________________________

We round this value to:  " 0.54 g " ;

 → since "5.7 L " has 2 (two) significant figures;  

     22.4 is an exact number conversion;

     and "5.7 L" has fewer significant figures than:

    " 2.104588 " ; or:  " 1.00794 " .

  → as such: We round to "2 (two) significant figures."

______________________________

Hope this is helpful.  Wishing you the best in your academic endeavors!

_______________________________

Answer:

Electrical and magnetic

You exert a gravitational force on the pupil and the pupil exerts an equal gravitational force on you. ... The size of the gravitational force depends on the mass of the objects involved. The greater the mass, the greater the gravitational force.

Explanation:

Balanced equation :

2Al +6HCI⇒ 3H₂ + 2AlCI₃

Given

Reaction (unbalanced)

Al +HCI⇒ H₂ + ALCI₃

Required

Balanced equation

Solution

Give a coefficient

aAl +bHCI⇒ cH₂ + AlCI₃

Al, left = a, right=1⇒a= 1

Cl, left = b, right=3⇒b=3

H, left = b, right=2c⇒b=2c⇒3=2c⇒c=3/2

The equation becomes :

Al +3HCI⇒ 3/2H₂ + AlCI₃ x 2

2Al +6HCI⇒ 3H₂ + 2AlCI₃

Answer:

fire

Explanation:

Answer:

ants if you splash a ant with sum water that shít is dead

Answer:

All except a diamond

Explanation:

The helium in the balloon has mass it fills the space its in.

The neon-filled tube has mass because it takes up space.

Water in a glass has mass because the water is taking up space.

A diamond does not because it does not take up space.

Sample left = 6.25 g

The percentage = 6.25%

Given

t1/2 = half-life = 3.8 days

t = decay time = 15.2 days

No = initial sample = 100 g

Required

Nt = final sample left

The percentage

Solution

General formulas used in decay:  

[tex]\large{\boxed{\bold{N_t=N_0(\dfrac{1}{2})^{t/t\frac{1}{2} }}}[/tex]

Input the value :

[tex]\tt N_t=100.\dfrac{1}{2}^{15.2/3.8}\\\\N_t=100.\dfrac{1}{2}^4\\\\N_t=6.25~g[/tex]

The percentage : Nt/No

6.25 : 100 = 6.25%

Answer:

A Infiltration

Explanation:

The downward movement of water through pore spaces and other spaces in soil due to gravity is called infiltration.

Infiltration is greatly due to the force of gravity forcing water through pore spaces downward.

Answer:

The amount of CaCO₃ Jeeves needs to find is approximately 71.392 grams

Explanation:

The given parameters are;

The mass of the CaO required = 40 g

The chemical reaction for the production of CaO from CaCO₃ is given as follows;

CaCO₃(s) → CaO(s) + CO₂(g)

Therefore, 1 mole of CaCO₃ produces 1 mole of CaO and 1 mole of CO₂,

The molar mass of CaO = 56.0774 g/mol

Number of moles, n = Mass/(Molar mass)

The number of moles of CaO = 40 g/(56.0774 g/mol) ≈ 0.7133 moles of CaO

Therefore, given that 1 mole of CaO is produced from 1 mole of CaCO₃ 0.7133 moles of CaO will be produced from 0.7133 moles of CaCO₃

The molar mass of CaCO₃ = 100.0869 g/mol

Mass = The number of moles × The molar mass

∴ The mass of CaCO₃ Jeeves needs to find = 0.7133 moles × 100.0869 g/mol ≈ 71.392 g

The mass of CaCO₃ Jeeves needs to find ≈ 71.392 grams.

Answer:

1/8

Explanation:

Use logic,

every one hour, half of a radioactive remains

for the first hour, half remains

for the second hour, half of half remains or quarter remains

for the third hour, 1/2 of 1/2 of 1/2 or 1/8 remains

or use this equation

[tex]n = r ({ \frac{1}{2} })^{ \frac{f}{t} } [/tex]

where

n = amount after f time

r = amount of the original isotope

f = time

t = half-life

Answer:

9.64g/mL

Explanation:

Given parameters:

Mass of the metal  = 106g

Volume of cylinder = 50mL

Volume difference  = 31mL  - 20mL  = 11mL

Unknown:

Density of the metal  = ?

Solution:

To find the density of the metal, we use;

 Density  = [tex]\frac{mass}{volume}[/tex]  

 Density  = [tex]\frac{106}{11}[/tex]   = 9.64g/mL

Answer:

B. 9

Explanation:

The formula of the compound is given as:

            9NaCl

Coefficient is the number before the compound. The compound here is made up of sodium and chlorine.

Therefore, we have 9 as the coefficient and it is 9 moles of NaCl.

Note, NaCl is an ionic compound.

Osmosis is of two types:

Endosmosis– When a substance is placed in a hypotonic solution, the solvent molecules move inside the cell and the cell becomes turgid or undergoes deplasmolysis. This is known as endosmosis.

Exosmosis– When a substance is placed in a hypertonic solution, the solvent molecules move outside the cell and the cell becomes flaccid or undergoes plasmolysis. This is known as exosmosis.

There are some variations or types of osmosis on the basis of the direction of the movement of solvent molecules.

Answer:

I think the answer would be B. hope this helps!!

Explanation:

Answer:

2Fe(s) + 3O2(g) --------> 2FeO3(s)

Explanation:

According to the question, a  battery was used  to light the steel wool by bringing the terminals very close together. When  the battery came into contact with the steel wool, current was sent out through the thin wire.  This caused the iron to heat up quite well.

Iron reacts with oxygen under these conditions as follows;

2Fe(s) + 3O2(g) --------> 2FeO3(s)

This is the chemical reaction that occurs when the steel wool is set on fire.

Chemical equation involved in Dr. Jeff's demonstration is

2 Fe+3 O₂[tex]\rightarrow[/tex]2 FeO₃

Battery is a device which helps in conduction of current. When a battery is used to pass a current through  a substance in this case which is steel wool made up of iron it starts getting heated up.

The amount by which substance gets heated up is directly proportional to the current passing through it. As more current is passed through the battery it gets heated more.

During heating, the iron present in the steel wool reacts with oxygen to form iron oxide with iron present in the+3 oxidation state.When the heat exceeds a certain point the steel wool catches fire due to the heat generated. The  heat causes the electrons present in steel wool of iron to move faster and collide with each other  thus generating more heat.

Learn more about effect of heat in chemical reactions:

https://brainly.com/question/487518

#SPJ2

Answer:

c! Hope this helps!

Explanation:

BRAINLIEST PLZ ;)

Answer:

I think its the third one im not sure tho

Explanation:

Answer: This law states that, despite chemical reactions or physical transformations, mass is conserved — that is, it cannot be created or destroyed — within an isolated system. In other words, in a chemical reaction, the mass of the products will always be equal to the mass of the reactants.