before leaving earth, the mass if an astronaut is measured to be 60kg. the astronaut lands on the moon and measures the acceleration of gravity to be 1.6 m/s^2. what is the mass of the astronaut at moon?​

Answer:

it implies our universe is expanding

Answer:an inspirational statement of an idealistic emotional future

Explanation:

I don't know if it's right tho

Answer:

The document that state tge currentand future objectives of an organization.

Answer:

The value is  [tex]|v| = 7.39 \ m/s[/tex]

Explanation:

From the question we are told that

    The angular speed is  [tex]w = 2030 \ rpm = \frac{2030 * 2 * \pi }{ 60} = 212.61 \ rad/s[/tex]

    The distance between the minimum and maximum external position is  [tex]d = 6.95 \ cm = 0.0695 \ m[/tex]

Generally the amplitude of the crank shaft is mathematically represented as

         [tex]A = \frac{d}{2}[/tex]      

=>     [tex]A = \frac{0.0695}{2}[/tex]    

=>     [tex]A = 0.03475 \ m[/tex]

Generally the maximum speed of the piston is mathematically represented as

        [tex]|v| = A * w[/tex]  

=>    [tex]|v| = 0.03475 * 212.61[/tex]

=>    [tex]|v| = 7.39 \ m/s[/tex]

Answer:

In physics, the weber is the SI derived unit of magnetic flux. A flux density of one Wb/m2 (one weber per square metre) is one tesla.

Hope it helps !

Answer:

Weber unit of magnetic flux in the international system of units (SI), defined as the amount flux that, linking an electrical circuit of one turn (one loop of wire) , produces in it an electromotive force of one volt as the flux is reduced to zero as a uniform rate in one second .

it was named in honour of the 19th century German physicist Wilhelm Eduard Weber

Answer:

A. Join glycerol to fatty acids

Explanation:

I majored in Physics.

Answers: 1) 3 kg m²

                2) 2.88 kg m²

Explanation: Question 1

                      I = m(r)²+ M(r)²

                      I = 1.2 kg × (1 m )² +1.8 kg ×(1 m )²

                    ∴  I =   3 kg m²

                      Question 2

ACCORDING TO THE DIAGRAM DRAWN FOR QUESTION 2

we have to decide where the center of gravity (G) lies and obviously it should lie somewhere near to the greater mass. (which is 1.8 kg). Since we don't know the distance from center of gravity(G) to the mass (1.8 kg) we'll take it as 'x' and solve!!

moments around 'G'

F₁ d ₁ = F₂ d ₂

12 (2-X) = 18 (X)

24 -12 X =18 X

∴  X = 0.8 m

∴ ( 2 - x ) = 1.2 m

∴ Moment of inertia (I) going through the center of mass of two masses,

⇒ I = m (r)² +M (r)²

⇒ I = 1.2 × (1.2)² + 1.8 × (0.8)²

⇒ I = 1.2 × 1.44 + 1.8 × 0.64

⇒ I = 1.728 + 1.152

⇒ ∴ I = 2.88 kg m²

∴ THE QUESTION IS SOLVED !!!

Answer:

(C) an increase in tue distance between the ibject causes a greater change in the gravitational force than the same increase in mass

Hope this helps

Answer:

C: An increase in the distance between the objects causes a greater change in the gravitational force than the same increase in mass.

Explanation:

it's C on edge! hope this helps!!~ (❁´▽`❁)*✲ﾟ*

Answer:

nearly 2 days or less hes fast but not that fast

Explanation:

but maybe he can run it in five minutes

Answer:

when a sled is moving, the kinetic energy is changing beacuse of the speed and mass. its cause the sled to move, and changes because you aren't at a constant speed. potential energy changes when you get on. because you are adding more weight causing the gravity to change.

D) Speed, direction, or both

Mass doesn’t just CHANGE like that.

Answer:

3.333 m/s^2

Explanation:

50/15 = 3.33 m/s^2

Answer:Yes

Explanation:yeah i think it could be possible because the universe is so far and wide its probably infinite and if we did i personally believe that we would be absolutely be annihilated by them because we would be so far behind technology wise we would have no use for the\

Answer:

PLEASE MARK AS BRAINLIEST!!

Explanation:

ANSWER IS IN THE IMG BELOW

Answer:

a) ll and Ill only

Explanation:

Let the mass of the wrench = m

and the mass of the astronaut = M

Initially, the velocity of the astronaut and wrench are zero.

The astronaut throws the wrench in one direction and subsequently recoils back with a velocity in the opposite direction.

Let v and V be the velocity of the wrench and the velocity of the astronaut respectively.

In space, there is no external force acting, the momentum must be conserved.

So, m(0)+M(0)=m(v)+M(V)

So, 0=mv+MV

[tex]\Rightarrow mv=-MV[/tex] ...(i)

Here, the momentum of the wrench = mv, and the momentum of the astronaut= MV. The negative sign showing that both the momentum are in opposite direction.

Therefore, the momentum of the wrench is equal and opposite to the momentum of the astronaut.

According to Newton's second law, the rate of change of momentum = applied force.

Let it take [tex]\Delta t[/tex] seconds to change the momentum.

So, for the wrench

[tex]m(v-0)/\Delta t= F_w \\\\\Rightarrow m(v-0)=F_w\Delta t \\\\\Rightarrow mv=F_w\Delta t \cdots(ii)[/tex]

Here, [tex]F_w\Delta t[/tex] is the impulse applied to the wrench.

Similarly, for the astronaut

[tex]M(-V-0)/\Delta t= F_a[/tex] [negative sign (-V) for opposite direction]

[tex]\Rightarrow M(-V-0)=F_a\Delta t \\\\\Rightarrow -MV=F_a\Delta t[/tex]

Here, [tex]F_a\Delta t[/tex] is the impulse applied to the astronaut.

So, the impulse on the astronaut.

By using equations (i) and (ii)

[tex]F_a\Delta t=F_w\Delta t[/tex]

Therefore, the impulse applied to the wrench is equal and opposite to the impulse applied to the astronaut.

Hence, option (a) is correct.

Answer:

Convergent.

Explanation:

Just as oceanic crust is formed at mid-ocean ridges, it is destroyed in subduction zones. Subduction is the important geologic process in which a tectonic plate made of dense lithospheric material melts or falls below a plate made of less-dense lithosphere at a convergent plate boundary.

Answer:

Police officer

Explanation:

Because police officers wants to gather information on what happens and question people to know everything. That is what Derick is doing

Answer:

B. Planet X, because its line has the greater slope.

Explanation:

In a speed graph, acceleration is slope. A greater slope means a greater acceleration. According to Newton's 2nd law (F=mg), a greater acceleration means a greater force.

Planet X exerts the greater force of gravity on the sphere, because its line has the greater slope. Hence option B is correct.

Gravitational force is force of attraction between two masses. Gravitational force(F) between two bodies is directly proportion to the product of masses(m₁,m₂) of two bodies and inversely proportional to square of distance(r) between them. mathematically it is written as,

F ∝ m₁.m₂

F ∝ 1/r²

F = G m₁,m₂÷r²

where G is gravitational constant, whose value is 6.6743 × 10⁻¹¹ m³ kg-1s⁻².

Force is expressed in Newton N in SI unit. its dimensions are [M¹L¹T⁻²].

This is analogous with coulomb's law which gives force between two charges.

if a planet has greater gravitational force(force of gravity), then body falls with greater speed as compare to other planet which is having less force of gravity. we can see in case of planet X there is greater speed as compare to plane Y in short time. Hence option B is correct.

To know more about Gravity :

https://brainly.com/question/31321801

#SPJ2.

Answer:

a) Weight of Roommate = 481.4 N

b) μk = 0.34

Explanation:

a)

The force required to move the couch must be equal to the force of friction:

F = frictional force

F = μW

W = F/μ

where,

W = Total Weight of Couch and Roommate

F = Force Required start to move couch = 250 N

μ = coefficient of static friction between couch and floor = 0.43

Therefore,

[tex]W = \frac{250 N}{0.43}\\\\W = 581.4 N[/tex]

So, the total weight is given as:

W = Weight of Couch + Weight of Roommate

Weight of Roommate = W - Weight of Couch

Weight of Roommate = 581.4 N - 100 N

Weight of Roommate = 481.4 N

b)

Now, the force required to keep the couch moving can be given as equal to the kinetic friction force:

F = kinetic friction

F = μk*W

μk = F/W

where,

μk = coefficient of kinetic friction = ?

F = Force required to keep the couch moving = 200 N

Therefore,

μk = 200 N/581.4 N

μk = 0.34

The Pelican  must aim differently than where the fish appears to be because light is refracted from air to water.

Refraction is the change in the direction of a wave at the interface between two media. The effects of refraction are easily seen when light is travelling from air to water hence objects are not really where they appear to be when viewed above the water surface.

Hence, the Pelican  must aim differently than where the fish appears to be because light is refracted from air to water.

Learn more about refraction: https://brainly.com/question/11155928

Answer:

Power_input = 85.71 [W]

Explanation:

To be able to solve this problem we must first find the work done. Work is defined as the product of force by distance.

[tex]W = F*d[/tex]

where:

W = work [J] (units of Joules)

F = force [N] (units of Newton)

d = distance [m]

We need to bear in mind that the force can be calculated by multiplying the mass by the gravity acceleration.

Now replacing:

[tex]W = (80*10)*3\\W = 2400 [J][/tex]

Power is defined as the work done over a certain time. In this way by means of the following formula, we can calculate the required power.

[tex]P=\frac{W}{t}[/tex]

where:

P = power [W] (units of watts)

W = work [J]

t = time = 40 [s]

[tex]P = 2400/40\\P = 60 [W][/tex]

The calculated power is the required power. Now as we have the efficiency of the machine, we can calculate the power that is introduced, to be able to do that work.

[tex]Effic=0.7\\Effic=P_{required}/P_{introduced}\\P_{introduced}=60/0.7\\P_{introduced}=85.71[W][/tex]

Answer:

velocity = 16.05 m/s

Explanation:

inelastic collision formula:

m1u1 + m2u2 = (m1 + m2)v

m1 = 4kg

u1 = 20m/s

m2 = 15kg

u2 = 15m/s

find v ?

m1u1 + m2u2 = (m1 + m2)v

(4×20) + (15×15) = (4+15)v

80 + 225 = 19v

305 = 19v

19v = 305

v = 305/19

v = 16.05 m/s

Answer:

1)    x_{cm} = 5 m ,  2)  I = 168.32 kg m²

Explanation:

1) An important concept of center of mass is

          [tex]x_{cm} = \frac{1}{M} \sum x_{i} m_{i}[/tex]

where M is the total mass of the system

Let's apply this equation to our case, suppose that all masses are equal and are worth 1 kg

         [tex]x_{cm}[/tex] = ⅓ (1 0 + 1 5 + 1 10)

         x_{cm} = 5 m

2) In this para indicates that there is an axis of rotation at the point xo = 3.8 m and they ask to calculate the moment inertia.

Let's use the parallel axes theorem

          I =    I_{cm} + M D

where    I_{cm}  is the moment of inertia with respect to the center of mass, D the distance between the two axes of rotation and M the total mass of the system

Let's look for the moment of inertia of the center of mass

         [tex]I_{cm}[/tex] = 1  0 + 1  5² + 1  10²

         I_{cm} = 125 kg m²

the total moment of inertia is

        I = 125 + 3 3.8²

        I = 168.32 kg m²

The moment of inertia of the 3-mass system about the new axis is 54.32 kgm/s².

We have three masses each of mass = 1kg such that they are in line with mass m at origin, m at 5m and m at 10m

(a) The center of mass:

[tex]X=\frac{m_1x_1+m_2x_2+m_3x_3}{m_1+m_2+m_3} \\ \\ X =\frac{ 1*0+1*5+1*10}{1+1+1}\\ \\ X = 5m[/tex]

Hence the center of mass of the system is at x = 5m.

(b) The moment of inertia about the axis passing through x = 3.8m

from the parallel axis theorem:

[tex]I = I_{cm} + Md^2[/tex]

where, [tex]I_{cm}[/tex] is the moment of inertial along an axis passing through the center of mass of the system, M is the total mass of the system and d is the distance of the given axis from center of mass.

M = 3kg

d = 5 - 3.8 = 1.2m

[tex]I_{cm}=1*5^2+1*0+1*5^2\\\\ I_{cm}=50 kgm/s^2[/tex]

Md² = 3×(1.2)²

Md² = 4.32 kgm/s²

I = 50 + 4.32

I = 54.32 kgm/s² is the moment of inertial about the given axis.  

learn more:

https://brainly.com/question/25955625

Answer:

I = 4.4 kg*m^2

Explanation:

       [tex]L_{o} = L_{f} (1)[/tex]

       [tex]L_{o} =I_{A} * \omega_{oA} + I_{B} * \omega_{oB} (2)[/tex]

       [tex]L_{o} = 3.4kg*m2 * 7.2rad/s + I_{B} * (-9.8 rad/s) (3)[/tex]

       [tex]L_{f} = (I_{A} + I_{B}) *\omega_{f} (4)[/tex]

       [tex]L_{f} = (3.4 kg*m2 + I_{B} ) * (-2.4 rad/s) (5)[/tex]

Complete question

The diagram for this question is shown on the first uploaded image

Answer:

The largest possible distance is [tex]e = 15.33 \ m[/tex]

Explanation:

From the question we are told that

   The separation between Speaker at  position  A and B  is  AB =  6.60 m

   The frequency of the tune which the speaker are playing is [tex]f = 126 \ Hz[/tex]

    The speed of sound is [tex]v = 343 \ m/s[/tex]

Generally the wavelength of the tune playing is mathematically represented as

           [tex]\lambda = \frac{v}{f}[/tex]

=>        [tex]\lambda = \frac{343}{ 126}[/tex]

=>        [tex]\lambda = 2.72 \ m[/tex]

Let the observer be at position D

Generally the distance A and  is mathematically  evaluated using  Pythagoras theorem as

       [tex]AC = \sqrt{AB ^2 + BC^2}[/tex]

Let BC = e

So  

       [tex]AC = \sqrt{6.60 ^2 + e^2}[/tex]

Generally the path difference between the first and the second speaker from the observer point of view is mathematically represented as

       [tex]P = AC - BC[/tex]

=>     [tex]P = \sqrt{6.60 ^2 + e^2} - e[/tex]

Generally the condition for destructive interference is mathematically represented as

            [tex]P = (2n - 1 )\frac{\lambda}{2}[/tex]

Here n is the order of the fringe which is  one

=>        [tex]\sqrt{6.60 ^2 + e^2} - e = (2 * 1 - 1 )\frac{2.72}{2}[/tex]

=>        [tex]\sqrt{6.60 ^2 + e^2} - e = 1.36[/tex]

=>        [tex]6.60 ^2 + e^2 =( 1.36 +e)^2[/tex]

=>        [tex]6.60 ^2 + e^2 =1.8496 + 2.72e +e^2[/tex]

=>          [tex]e = 15.33 \ m[/tex]

Answer:

the upward force is equal to the passenger weight

The answer that is the truth about the force that the seat exerts on the passenger is the upward force is equal in magnitude to the passenger's weight.

The acting forces on the body has been said to be vertical. This implies that the upward force and the downward force of gravity are the same.

Using the second law of Isaac Newton, the downward direction of the forces would be ascertained.

Read more on force and magnitude here:

https://brainly.com/question/19802988

Question is whether the statement made is true or false.

Answer:

False

Explanation:

The statement is false.

Thus is because even though we are told that the spaceship is running at 1000 miles per hour and an enters an area free of gravitational forces, there is no rule or law that says the engine must run at some maximum level to maintain the velocity.

So, that's why it is false as there is no proof of the statement from every law of physics.