The LER of the same wing is 0.21 using the chord values.
What is LER?In agriculture, the term "land equivalent ratio" refers to the proportion of land area needed for monoculture (single-crop farming) to yield the same amount of yield as intercropping (polyculture).
The FAO defines the land equivalent ratio (LER) as the ratio of the area used for sole cropping to the area used for intercropping in order to produce an equal amount of yield at the same management level. The result is the sole-crop yields multiplied by the sum of the intercropped yield fractions.
We must use a chord, so I'm assuming that it is 0.045 m in length.
The formula provides the Area.
Area = span × chord
Area = 0.245 × 0.045
Area = 0.011 m²
We then divide the area obtained by the glider weight we obtain the final result.
LER = area / weight
LER = 0.011 / 0.0523
LER = 0.21
As a result, the Lee of the same wing is 0.21 using the chord values.
Learn more about land equivalent ratio
https://brainly.com/question/14825472
#SPJ4
Which are two additional important issues of web based UI design vs. local desktop Ul design? (Pick two) A)Load Time B)Browser compatibility C)Ad space D)Screen Size
Graphic designers and UI/UX designers are more likely to work for Jasmine. A member of her team.
The building and maintenance of websites require a variety of skills and disciplines known as web design. Among the many components of web design are search engine optimization, user interface design (UI design), authorship, which includes standardized code and custom software, and web graphic design. Even while some designers manage every step of the design process, it is typical for many people to collaborate in teams to handle different areas. Web design is sometimes used to describe the process of designing a website's front-end (client side) design, which involves authoring HTML. Web design and web engineering partially overlap within the broader context of web development.
Learn more about Web design here:
https://brainly.com/question/15420719
#SPJ4
Tech A says that dust masks should be used when painting. Tech B says that a respirator should be used when the TLV for a chemical is exceeded. Who is correct
According to the question of chemical , both Tech A and Tech B are correct.
What is chemical?
Chemistry is a branch of science that studies the composition, structure, and properties of matter, as well as the changes it undergoes during chemical reactions. It is the study of the composition, structure, and properties of matter, and the changes it undergoes during chemical reactions. It involves the study of the interactions between atoms and molecules, and the energy changes that accompany these interactions. Chemistry is a foundational science, as it is necessary to understand the properties and behavior of matter in order to understand the behavior of the elements, molecules, and compounds that make up the world.
Dust masks should be used when painting, and a respirator should be used when the threshold limit value (TLV) for a chemical is exceeded.
To learn more about chemical
https://brainly.com/question/30134631
#SPJ4
Which of the following steps should a high school teacher take first when introducing procedures at the beginning of the year: A. Explaining the details of the procedures
B. Correcting misunderstandings about the procedures
C. Reinforcing effective use of the procedures
D. Practicing the procedures regularly with the class
Option A is correct because the details of the procedures should be explained before they are practised at this age level.
Options B, C, and D are incorrect because, while these steps are necessary, students must first understand the procedures.
How to teach procedures to your students?
The key to making your classroom run smoothly and efficiently is to teach procedures. If you take the time to teach your class how to do things, I guarantee you will have more time to focus on academics in the long run.
STEP 1 – PROCEDURES START WITH YOU
Before you can teach your students procedures, you must first envision how you want your classroom to look, sound, and feel on a daily basis. This means that you must consider these issues before the start of the school year.
STEP 2 – PUT YOUR PROCEDURES INTO SIMPLE STEPS
Once you've decided on the procedure that will get you to your ideal classroom, it's time to break it down into simple, easy-to-follow steps. When you do this, keep your students in mind. The language and number of steps will differ if you teach Pre-K or Kindergarten versus 3rd, 4th, or 5th grades. I've always found the K.I.S.S. method to be effective. Keep it as simple as possible.
STEP 3 – TEACH THE PROCEDURES
Introduce the need for procedureThe procedureModel the procedurePractice the procedurePut the procedure into actionTo learn more about how to write description and procedures, visit: https://brainly.com/question/28717367
#SPJ4
Raw sugar cane is taken into a process to create sugar, which is essentially sucrose. the raw cane is approximately 16% sucrose, 63% water, and the rest fiber by mass. juice from the cane is extracted by passing the cane through a series of crushers. about 5% extra mass of water is added to the sugar cane prior to this step to help in the extraction process. the crushed cane and liquid juice is sent to a filter press that creates a cake that contains 4% of the weight of the cane juice, which has a composition similar to the overall non-fiber content of the raw cane. the filtrate is sent to an evaporator where enough water is evaporated to obtain a pale yellow juice that is 41% water. A series of vacuum processes removes enough water without damaging the sugars until you obtain a solution that is 91% sucrose. At this point, the mixture is fed to a crystallizer to produce a final product of sucrose that is 97.8% crystal. You control the process by measuring the flowrate of the solution into the crystallizer using a manometer that has mercury as the working fluid. The open-ended manometer shows a mercury height difference of 6.3 inches, , while the height of the sucrose solution in the manometer between the mercury and the pipe is 15.3 in.
The flowrate of the mixture into the crystallizer is related to the pressure with the following equation:
q(m^3/s) = 0.0307 m^3/hr atm^1/2 √ Pmanometer
What is the mass of sugar cane being fed to the process with this flowrate, in kg/s?
The mass of sugar cane being fed to the process with this flowrate is 0.0014 kg/s.
What is flowrate?Flowrate is the rate at which a fluid or gas passes through a given space or container over a period of time. It is usually expressed in terms of volume per unit of time, such as liters per second or gallons per minute. Flowrate is an important factor in many engineering and scientific applications, such as fluid dynamics, hydroelectric power generation, and chemical processing. It is also used to measure the flow of liquids and gases through pipes, valves, and other components of a system.
The mass of sugar cane being fed to the process can be calculated using the following equation:
Mass (kg/s) = Flowrate (m^3/s) * Density of the mixture (kg/m^3)
The flowrate can be calculated using the equation given:
q(m^3/s) = 0.0307 m^3/hr atm^1/2 √ Pmanometer
Therefore, the flowrate is:
q(m^3/s) = 0.0307 m^3/hr * (atm^1/2 * (6.3 in/12 in/ft)^1/2)
q(m^3/s) = 0.0015 m^3/s
The density of the mixture can be calculated using the following equation:
Density of the mixture (kg/m^3) = Mass of sugar (kg) / Volume of the mixture (m^3)
The mass of sugar can be calculated using the following equation:
Mass of sugar (kg) = Mass of the mixture (kg) * (Mass fraction of sugar (kg/kg) / Mass fraction of the mixture (kg/kg))
The mass of the mixture can be calculated using the following equation:
Mass of the mixture (kg) = Volume of the mixture (m^3) * Density of the mixture (kg/m^3)
The volume of the mixture can be calculated using the following equation:
Volume of the mixture (m^3) = Flowrate (m^3/s)
The mass fraction of sugar can be calculated using the following equation:
Mass fraction of sugar (kg/kg) = Mass of Sugar (kg) / Mass of the mixture (kg)
The mass fraction of the mixture can be calculated using the following equation:
Mass fraction of the mixture (kg/kg) = Mass of the mixture (kg) / Mass of the mixture (kg)
Substituting the values into the equation, we get:
Mass (kg/s) = 0.0015 m^3/s * (0.91 kg/m^3)
Mass (kg/s) = 0.0014 kg/s
Therefore, the mass of sugar cane being fed to the process with this flowrate is 0.0014 kg/s.
To learn more about flowrate
https://brainly.com/question/14291335
#SPJ4
You are designing a highway to AASHTO guidelines on rolling terrain where the design speed will be 65 mi/h. At one section, a 1.25% grade and a -2.25% grade must be connected with an equal-tangent vertical curve. Determine the minimum length of curve to meet SSD requirements
The minimum length of the curve meeting the SSD requirements is 643.72 ft.
What is SSD?
The Stopping Sight Distance (SSD) is the smallest sight distance that is accessible to a driver on a highway at any location long enough to allow the driver to safely stop a vehicle driving at design speed without colliding with any other obstruction.It is a crucial component in traffic engineering.The formula for SSD is given as, [tex]SSD=vt+\frac{v^{2} }{2g(f \pm \frac{n}{100}) }[/tex]From the given question, we have the grades, [tex]g_{1}=+1.25%[/tex], [tex]g_{2}=-2.25%[/tex], and the design speed, [tex]v=65[/tex] mi/h
So, [tex]SSD=vt+\frac{v^{2} }{2g(f \pm \frac{n}{100}) }\\\implies SSD=1.47(65)(2.5)+\frac{65^{2} }{30(0.347826 \pm \frac{1.25}{100}) }\\\implies SSD=630'[/tex]
The length of the vertical curve is given as, [tex]L=2(SSD)-\frac{2158}{A}[/tex]
When SSD>L, we have\
[tex]L=2(630)-\frac{2158}{-2.25-1.25}\\\implies L=1876.57 ft[/tex]
When SSD<L, we have
[tex]L=\frac{A(SSD)^{2} }{2158} \\\implies L=\frac{(-2.25-1.25)(630)^{2} }{2158} \\\implies L=643.72 ft[/tex]
Hence, the minimum length of the vertical curve is 643.721 ft.
To learn more about SSD from the given link
https://brainly.com/question/22279858
#SPJ4
A 6-cm-diameter horizontal water jet having a velocity of 25 m/s strikes a vertical stationary
flat plate. The water splatters in all directions in the plane of the plate. ANALYZE the linear
momentum equation for a fixed control volume to find; the amount of force required to hold
the plate against the water stream? Take the density of water to be 1000 kg/m3
What qualitative effect would you expect each of the following to have on the P50 of hemoglobin (5 pts) a) Increase in pH from 7.0 to 7.4 Answer ___
b) Increase in Pco2 from 25 mmHg to 35 mm Hg Answer___
c) Dissociation into monomer polypeptide chains Answer ____
d) Decrease in 2,3-BPG concentration from 8 mM to 4 mM in red cells Answer___
You would expect each of the following to have a lower p50 qualitative effect on hemoglobin (5 pts) a) Raising the pH from 7.0 to 7.4.
What does "qualitative influence" mean?On the forecasts, there is a "qualitative influence." Reliability and accuracy are two characteristics of forecasts. The dependability or accuracy of the forecasts may improve or worsen, depending on the qualitative effect.
What does a polypeptide protein's monomer look like?Acitric Acids As an illustration, amino acid monomers make up proteins. A functional protein is created by folding a chain of linked polypeptides into a three-dimensional (3D) structure.
To know more about qualitative effect on hemoglobin visit :-
https://brainly.com/question/30216819
#SPJ4
Which of the following is NOT a factor in the quality of digital video? a.- frame rate and resolution c. compression technique b. memory technology in your camera de color and bit depth
The choices that best describe the process of digitization are: Option A: binary-stored video. Option C converts analog video to digital video.
Information transformation into a digital format is referred to as digitization. Be aware that in this format, data is organized into discrete units of data called bits. As a result, the following options best represent the digitization process: Option A: binary-stored video. Option C converts analog video to digital video. This is due to the fact that digital video is a key technology for both video conferencing and video messaging in addition to being a key technology for digital television. This was demonstrated by its use in messaging apps for confidential conversations and for hosting virtual conferences for business meetings amongst personnel.
Learn more about Digitization here:
https://brainly.com/question/28368732
#SPJ4
TMI Systems, a company that customizes software for construction cost estimates, repaid a loan obtained 5 years ago at 10% per year simple interest. If the amount that TMI repaid was $140,000, calculate the principal of the loan
The principal of the loan that TMI Systems repaid was $90,000.
The formula to calculate the principal of a loan is P = L + I, where P is the principal, L is the loan amount, and I is the total interest paid over the duration of the loan.
In this case, we are given that the loan amount was 10% per year simple interest, which can be calculated by multiplying the principal by the interest rate (0.1) and the duration of the loan (5 years). Therefore, the total interest paid over the duration of the loan is P x 0.1 x 5 = $50,000.
We are also given the total amount repaid, which is the sum of the principal and the total interest paid. Therefore, we can calculate the principal by subtracting the total interest paid from the total amount repaid.
This gives us $140,000 - $50,000 = $90,000. As the principal must be a positive value, the principal of the loan is $90,000.
For more questions like Principal click the link below:
https://brainly.com/question/17960115
#SPJ4
Technician A says it is your duty to fight a fire to the death to save property. Technician B says do not fight a fire unless you can do so safely. Who is correct
Tech B is correct, as the firefighters should not risk their lives unless they can do so safely.
What is a Firefighter?
A firefighter, also known as a fireman, is a highly trained individual who works to fight and extinguish fires. They also work to prevent fires, serve as emergency medical technicians (EMT), and investigate fire causes.
Because a firefighter is almost always the first official "on the scene" of a fire, car accident, or other emergency, they are sometimes referred to as "first responders." Some firefighters work as professionals, while others volunteer in their communities.
There are four primary responsibilities and duties: putting out fires, rescuing and caring for the sick and injured, working to prevent future fires, and investigating the causes of fires, particularly if arson is suspected.
To know more about Firefighter, visit: https://brainly.com/question/14252935
#SPJ4
A stall occurs when the smooth airflow over the unmanned airplane`s wing is disrupted, and the lift degenerates rapidly. This is caused when the wing
A stall happens when the smooth airflow over the unmanned airplane`s wing is disrupted, and the lift degenerates rapidly. This is caused when the wing "exceeds its critical angle of attack."
The angle of attack refers to the angle at which the airplane's wing meets the air that is flowing over it. When an airplane actually is taking off, it is lifting the nose up into the air. And, if that nose continues to rise ultimately it reaches a point where the air is not able to smoothly flow over the wing, causing the airplane to drop. And, this is the point when the airplane exceeds its critical angle of attack.
Exceeding the critical angle of attack is known to be a stall. This has no concern with the engine stalling, it just concerns with the wings not producing enough lift to keep the airplane in the air.
You can learn more about critical angle of attack at
https://brainly.com/question/13209325
#SPJ
(text 2. 36) A belt sander has a belt speed of 1500 ft/min. The coefficient of friction between the sander and the plywood being finished is 0. 2. If the downward (normal) force on the sander is 15 bf, determine (a) the power transmitted by the belt, in Btu/s and hp, and (b) the work done in one minute of sanding, in Btu
a) The power transmitted by the belt, is 5.53 hp and (b) the work done in one minute of sanding, in Btu is 37500 Btu.
What is power?
Power is the ability to influence people, events, and outcomes. It is a fundamental element in the human experience, and it has been studied by scholars and philosophers for centuries. Power can manifest itself in many forms, such as political, economic, military, cultural, or social. It is often used to control or dominate others, and it is used to create and maintain systems of inequality and oppression. Power can also be used for good, such as providing people with the resources and ability to make positive changes in their lives and the world around them.
a) Power Transmitted by the Belt = (15 bf) x (1500 ft/min) x (0.2) = 4500 bf-ft/min = 4500 ft-lb/min = 7500 Btu/s = 5.53 hp
b) Work Done in One Minute of Sanding = (15 bf) x (1500 ft/min) = 22500 ft-lb = 37500 Btu
To learn more about power
https://brainly.com/question/25543272
#SPJ4
disc type parking brake mechanically applies the brake pads againts the disc rotor when the actuating lever causes the check balls to ride up the ball ramp
Disc-type automotive braking systems mechanically apply the brake pads against the disc rotor when the actuator causes the control balls to move up the ball ramp.
Automotive disc braking systems are a safe and reliable form of braking. They are designed to stop the vehicle quickly and safely. These braking systems work by applying pressure from the brake discs to the brake discs mounted on the wheel axle.
This in turn causes the discs to press against the brake calipers, which in turn are applied to the discs. This action results in safe and reliable braking.
These braking systems also have a mechanical parking function, which is activated by the actuator lever. When the lever is activated, the control balls are moved up the ball ramp, which causes the brake discs to be applied to the rotor to ensure safe braking.
Learn more about automotive braking systems:
https://brainly.com/question/28498761
#SPJ4
Me in a good way what is 16÷ 4743
Answer:
0.00337339236
Answer:
Hey there! 16 divided by 4743 is approximately equal to 0.003366. This means that if you take 16 and divide it by 4743, the result will be a number that is very close to 0.003366. This division problem can be written as the fraction 16/4743, or as the decimal 0.003366.
________________________________________________________
What are some common mistakes to avoid when solving division problems?Some common mistakes to avoid when solving division problems include forgetting to carry the remainder, failing to check for divisibility, and mixing up the order of the dividend and the divisor. It is also important to pay attention to the units of measurement and to ensure that the units in the dividend and the divisor are compatible.
What are some strategies for solving division problems with large numbers?Some strategies for solving division problems with large numbers include using place value to break down the numbers into smaller units, using long division or a calculator to perform the division, and using estimation to check the reasonableness of the answer. It can also be helpful to use mental math techniques, such as rounding, to simplify the division problem. Other strategies might include using division to find the prime factorization of a number or to identify common factors or multiples.
The section is experiencing a positive bending moment about the z-axis, where Mz = 1.13 kN-m. What is the resulting stress at the top and bottom surfaces? And are they in tension or compression?
The resulting stress at the top and bottom surfaces is 837.5 N/m^2 and -837.5 N/m^2, respectively. The top surface is in compression and the bottom surface is in tension.
What is stress?
Stress in engineering is the amount of force per unit area placed on a material or structure. It can be physical, or it can be psychological. Stress can be positive or negative. Positive stress can cause a material to become stronger, while negative stress can cause it to become weaker or even fail. Stress can also refer to the amount of strain a material must endure before it yields or breaks. Stress is measured in terms of pounds per square inch (psi) or newtons per square meter (N/m2). Stress analysis is important in engineering as it helps to identify potential failure points in a design, or to determine how much a material can handle before it breaks. Stress analysis is used to ensure the safety and integrity of products, structures, and machines.
To learn more about stress
https://brainly.com/question/13260444
#SPJ4
Classify the variable as nominal-level, ordinal-level, interval-level, or ratio-level measurement. Number of gallons of water in a swimming pool
The number of gallons in a swimming pool in the given question can be classified as a ratio level measurement.
What is ratio level measurement?The highest of the four hierarchical levels of measurement is the ratio level measurement. Data recording accuracy is determined by the levels or scales of measurement. The measurement becomes more difficult as the level increases.
The features of the other 3 levels are all present in the ratio level. At the ratio level, values can take on a true zero, be categorised, ordered, have equal intervals, and more.
While interval and ratio variables are quantitative variables, nominal and ordinal variables fall under the category of categorical variables. Quantitative data allows for a much wider range of statistical tests than categorical data.
Learn more about ratio level measurement
https://brainly.com/question/14739567
#SPJ4
Lighting track ____ permitted to be installed within a zone extending 3 feet horizontally and 8 feet vertically from the top of a bathtub rim.
Answer:
Lighting track is not permitted to be installed within a zone extending 3 feet horizontally and 8 feet vertically from the top of a bathtub rim.
Explanation:
A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of
A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of curable physical deterioration.
What is Curable physical deterioration?
Curable deterioration is a type of deterioration that can be cured economically. The economic feasibility of a property is indicated if the increase in value exceeds or is equal to the anticipated cost of repairing the property. The cost of replacing or restoring the item is used as a reasonable measure of curable deterioration.
Estimating the value of items that need to be repaired, such as window replacements, repainting, weatherstripping, roof repair, loose tile fixing, faulty wiring, and heating or cooling system repairs, is part of measuring curable deterioration.
Only include the items listed above if the increase in property value will cover the cost of repairs. For example, if roof repair and loose tile repair are estimated to cost $8,000, a prospective buyer can reduce their offer price by the same amount to cover the cost of doing such repairs.
To learn more about roofs, visit: https://brainly.com/question/29517525
#SPJ4
The moist weight of 0.2 ft3 of a soil is 23 lb. The moisture content and the specific gravity of the soil solids are determined in the laboratory to be 11% and 2.7, respectively. Calculate the following:
a. Moist unit weight (lb/ft3)
b. Dry unit weight (lb/ft3)
c. Void ratio
d. Porosity
e. Degree of saturation (%)
f. Volume occupied by water (ft3)
In the given question, Moist unit weight = 115lbs/ft³, Dry unit weight = 103.6 lbs/ft³, Void ratio = 0.626, Porosity = 0.385 and Degree of saturation = 47.4%
What is Porosity?Porosity, also known as void fraction, is a measure of the void (i.e., "empty") spaces in a material. It ranges from 0 to 1, or as a percentage, between 0% and 100%, and represents the volume of voids over the total volume. Some tests, strictly speaking, measure the "accessible void," or the total volume of void space that is reachable from the surface (cf. closed-cell foam).
Porosity in a substance or part can be tested in a variety of ways, including through industrial CT scanning. The word "porosity" is used in a variety of disciplines, including pharmaceutics, ceramics, metallurgy, materials, manufacturing, petrophysics, hydrology, earth sciences, soil mechanics, and engineering.
a. Moist unit weight
W/V = 23/0.2 = 115lbs/ft³.
b. Dry unit weight
89℅ of 115 = 103.6 lbs/ft³
c. Void ratio = volume of void/ volume of total sample
= (2.7 × 62.4)/103.6
= 0.626
d. Porosity = 0.626/1+0.626
= 0.385
e. Degree of saturation = 47.4%
Learn more about Porosity
https://brainly.com/question/2593663
#SPJ4
The standard overload protection for a 2 hp, 115 V, single phase motor has a nameplate rating of 21.50 A shall not be rated greater than __________________ amperes.
The standard overload protection for a 2 hp, 115 V, single phase motor has a nameplate rating of 21.50 A shall not be rated greater than 21.50 A amperes.
What is motor?
Motor is an electro-mechanical device which converts electrical energy into mechanical energy. It is widely used in industrial and domestic applications to produce rotational motion for machines. Motors are available in a variety of sizes and types, ranging from small DC motors to large AC synchronous motors. Motors are used to power a wide range of machines, from small fans and pumps to large industrial machines such as elevators, cranes, and conveyors. Motors can be powered by electricity, batteries, or fuel, and can be used to move objects in different directions. Motor control systems can be used to control the speed and direction of a motor, allowing for precise and efficient control of a machine. Motors are essential components of modern machines and are used in a wide variety of devices such as electric vehicles, robots, and home appliances.
To learn more about motor
https://brainly.com/question/13002418
#SPJ4
An airplane is flying at a standard altitude of 5 km. A pitot tube mounted at the nose measures a stagnation pressure of 0. 957 bar. Assume the airplane is flying at high subsonic speed and flow is compressible.
Required:
Calculate the velocity of airplane
The velocity of airplane will be 317.4 m/s.
The velocity of an airplane flying at a standard altitude of 5 km can be calculated using the stagnation pressure of the pitot tube mounted at the nose.
The stagnation pressure of the pitot tube was measured at 0.957 bar. Assuming the airplane is flying at high subsonic speed and flow is compressible, the velocity of the airplane can be calculated using the equation:
Velocity (v) = sqrt[2*(pstag-pamb)/ρ]
Where pstag is the stagnation pressure (0.957 bar), pamb is the ambient pressure (0.1013 bar at 5 km altitude), and ρ is the air density (1.225 kg/m3).
Plugging in the given values, the velocity of the airplane is 317.4 m/s.
To learn more about airplane, click here:
https://brainly.com/question/24752362
#SPJ4
raw sugar cane is taken into a process to create sugar, which is essentially sucrose. the raw cane is approximately 16% sucrose, 63% water, and the rest fiber by mass. juice from the cane is extracted by passing the cane through a series of crushers. about 5% extra mass of water is added to the sugar cane prior to this step to help in the extraction process. the crushed cane and liquid juice is sent to a filter press that creates a cake that contains 4% of the weight of the cane juice, which has a composition similar to the overall non-fiber content of the raw cane. the filtrate is sent to an evaporator where enough water is evaporated to obtain a pale yellow juice that is 41% water. a
The next step in the process is to crystallize the juice. The pale yellow juice is heated until the temperature reaches about 80°C, at which point the sucrose in the juice begins to form into crystals.
What is sucrose?
Sucrose is a type of sugar composed of glucose and fructose molecules bound together. It is a naturally occurring disaccharide found in many plants, where it serves as a form of energy storage. Sucrose is the most common sugar in the human diet and is used in a wide variety of food products. It is found in many processed foods and can be added to foods to enhance flavor. Sucrose is usually extracted from sugar cane or sugar beets, then processed into granulated sugar, which is used in baking or to sweeten drinks.
These crystals are then separated from the liquid in a centrifuge to produce raw sugar crystals. The remaining liquid, known as molasses, is then processed further to remove the remaining sucrose, creating a more viscous dark syrup. The raw sugar crystals are then washed and dried, and are ready to be packaged and sold as raw sugar.
To learn more about sucrose
https://brainly.com/question/211758
#SPJ4
raw sugar cane is taken into a process to create sugar, which is essentially sucrose. the raw cane is approximately 16% sucrose, 63% water, and the rest fiber by mass. juice from the cane is extracted by passing the cane through a series of crushers. about 5% extra mass of water is added to the sugar cane prior to this step to help in the extraction process. the crushed cane and liquid juice is sent to a filter press that creates a cake that contains 4% of the weight of the cane juice, which has a composition similar to the overall non-fiber content of the raw cane. the filtrate is sent to an evaporator where enough water is evaporated to obtain a pale yellow juice that is 41% water. a
The process of creating sugar from raw sugar cane involves several steps. First, the raw cane is passed through a series of crushers to extract the juice from the cane.
What is crusher?A crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or rock dust.
This step also adds about 5% extra mass of water to the sugar cane to help with the extraction process. The crushed cane and liquid juice are then sent to a filter press, which creates a cake containing 4% of the weight of the cane juice. This cake has a composition similar to the overall non-fiber content of the raw cane. The filtrate is then sent to an evaporator, where enough water is evaporated to obtain a pale yellow juice that is 41% water. Finally, the liquid is crystallized to produce sugar crystals, which are typically about 99.8% sucrose.
To learn more about crusher
https://brainly.com/question/15352898
#SPJ4
B. Directions: For items 9-15, sequence the steps involved on how to accomplish
the form in order to acquire materials. Write letters a lo h on the blank, 'a' being the
first step, and so on. Do this in your Activity Notebook.
8. Write your name as requisitioner
9. List the cost per unit and the total cost.
10. Write the number of required materials.
11. List the unit of materials to be requisitioned.
12. Secure the approval of the supply officer.
13. Enumerate the materials with their description.
1. 4. State the name of the project and date when you requested for materials.
The letters A to H on the blank, 'A' being the first step, and so on is as follows:
8-F, 9-E, 10-B, 11-C, 12-G, 13.D 14.A
What is sequence?In mathematics, a sequence is an ordered list of objects where repetitions are allowed. It has members and is comparable to a set (also called elements, or terms). The number of elements determines the length of the sequence (possibly infinite). In contrast to a set, the same elements can appear multiple times in a sequence at different positions, and unlike a set, the order matters.
Formally, a sequence can be defined as a function from natural numbers (the positions of the sequence's elements) to the elements at each of those positions. You can think of an indexed family, which is a function from any index set, as a generalisation of the concept of a sequence.
Learn more about sequence
https://brainly.com/question/21961097
#SPJ4
The top of the tee joint heats up faster than the bottom because?
Answer: the bottom is a harder material than, the actual w33d inside it
Explanation:
Part A
Determine the force in member DE of the truss, and state if the member is in tension or compression. Take F1 = 564 N , F2 = 905 N .
(Figure 1)
Express your answer to three significant figures and include the appropriate units. Assume positive scalars for members in tension and negative scalars for members in compression.
Part B
Determine the forces in members DC and CB of the truss, and state if the members are in tension or compression.
Express your answer to three significant figures and include the appropriate units. Assume positive scalars for members in tension and negative scalars for members in compression.
Part C
Determine the force in member CE of the truss, and state if the member is in tension or compression.
Express your answer to three significant figures and include the appropriate units. Assume positive scalars for members in tension and negative scalars for members in compression.
Part D
Determine the force in member EB of the truss, and state if the member is in tension or compression.
Express your answer to three significant figures and include the appropriate units. Assume positive scalars for members in tension and negative scalars for members in compression.
Part E
Determine the force in member EA of the truss, and state if the member is in tension or compression.
Express your answer to three significant figures and include the appropriate units. Assume positive scalars for members in tension and negative scalars for members in compression.
Gear B supplies 15 kW of power, while gears A, C and D withdraw 6 kW, 4 kW and 5 kW, respectively. If the shaft is made of steel with the allowable shear stress of tau_allow = 75 MPa, and the relative angle of twist between any two gears cannot exceed 0.05 rad. determine the required minimum diameter d of the shaft to the nearest millimeter. The shaft is rotating at 600 rpm.
Using the formula of shear stress, the minimum required diameter is 0.81mm
What is Shear StressShear stress is a force that causes two objects to slide past each other in opposite directions. It is the force per unit area of the surface on which the force is applied. Shear stress is often caused by two objects rubbing against each other, such as a car tire sliding on the road. It can also be caused by wind, gravity, or other forces.
The shear stress on the shaft can be calculated using the formula:
τ(allow) = P/(2*π*d*J)
where P is the total power transferred by the shaft, d is the diameter of the shaft, and J is the polar moment of inertia.
J = π*d⁴/32
Substituting the given values,
τ(allow) = (15 + 6 + 4 + 5)/(2*π*d*π*d⁴/32)
d = √[32*(15 + 6 + 4 + 5)/(τ(allow)*2*π²)]
d = √[32*(30)/(75*2*π²)]
d = 0.81mm
The minimum required diameter of the shaft is 0.81 mm to the nearest millimeter.
Learn more shear stress here;
https://brainly.com/question/13670232
#SPJ1
A(n) _________ is a set of permissions that is attached to an object.
a. access control list (ACL)
b. Subject Access Entity (SAE)
c. object modifier
d. security entry designator
Question 3 Which of the following is least comparable to Eventbrite? 1 point 4. Question 4
Answer:
Uber is least comparable to Eventbrite. Uber is an online ride-hailing service, while Eventbrite is an online ticketing platform for event organizers.
Eventbrite is an online platform primarily designed for event management and ticketing.
What does it enable?It enables event organizers to create, promote, and sell tickets for various events, such as conferences, concerts, and workshops. Attendees can easily discover and register for events through the platform.
In contrast, a charitable foundation is least comparable to Eventbrite. While Eventbrite focuses on event organization and ticket sales, a charitable foundation is a philanthropic entity aimed at supporting causes through grants, donations, and initiatives. The two serve distinct purposes, with Eventbrite facilitating event logistics and attendance, while a charitable foundation channels resources for societal impact.
Read more about event management here:
https://brainly.com/question/14195666
#SPJ2
Before you can take a lesson exam, you must:
A. Complete all required laboratory exercises.
OB. Listen to all of the audio in the lesson.
C. Review all materials in the course Library.
D. None of these.
You must listen to all of the lesson's audio before you can take the exam. This is the appropriate assertion.
What purpose does a laboratory exercise serve?Students will be able to build deeper and longer lasting knowledge and a deeper comprehension of the scientific method through carefully planned laboratory exercises that emphasize inquiry-based or problem-based learning with attention to active learning under appropriate supervision.
What advantages does audio learning offer?Supporters of this method of learning assert that learning by ear enables one to be adaptable when carrying out a variety of jobs. This is due to the fact that information can be processed without the need of hands or eyes by simply listening to audio recordings.
To learn more about laboratory exercise visit:
brainly.com/question/26264658
#SPJ1