Calculate the percentage composition (by mass) of oxygen in K2SO4.

36.72 %

18.35 %

9.18 %

23.66 %

76.34 %​

As stated, the Tributary, River, and River system are in order of largest to smallest.

A river is a part of the ocean that resembles a ribbon and flows downward under the influence of gravity. A river may be both large and deep or it may be only shallow enough to wade over. A stream, watercourse, or brook is a streaming water source that is lower than a river.

The river flows through the landscape like a silver ribbon. The fast flowing river plunders everything in its path. The river is a seal that is attempting to return toward the tidal ways. A grizzly bear is the river, leaping to get its prey.

To know more about River visit:

https://brainly.com/question/17083829

#SPJ1

The complete question is-

Place the following in order from smallest to largest.

River, River system, Tributary.

Answer:

When ice or any other solid melts, its potential energy increases. Indeed, this is the only increase in energy, since the thermal kinetic energy, or temperature, does not increase while melting. Potential energy is the latent energy that could be released by the water, and this increases because the water will release heat energy if it is frozen solid again.

Ice is the lowest energy state of water at normal Earth pressures. At each phase change of water, whether ice to liquid water or liquid water to water vapor, the potential energy decreases. This is due to the Law of Conservation of Energy. Materials undergoing a change of state absorb or release heat energy, but their temperatures do not change. This is because, while the state change is occurring, all the heat energy is converted into the potential energy of the new state of matter.

Water, in particular, has a very large change in potential energy during phase changes. It takes a great deal of energy to change water from one state to another. This is because of the strong hydrogen bonds that form between water molecules. The liquid phase allows water molecules to be in contact with each other, while the solid phase puts water molecules in an overall optimal configuration relative to each other.

Explanation:

The IUPAC name for dimethyl ketone is (C) 2-propanone

The prefix "di-" indicates two methyl groups (CH3) is attached to the parent compound, which is a ketone. The parent compound is also known as propanone.

It is a clear, colorless liquid that is commonly used as a solvent and in the production of various chemicals and materials. It is also known as acetone. It is used as a solvent, as a starting material in the synthesis of other compounds, and as an intermediate in the production of certain polymers.

Utilized to create compounds such as plastic, fiber, medicines, and other substances. Other compounds can also be dissolved with it. It is a byproduct of the breakdown of human fat and is found naturally in plants, trees, volcanic gases, forest fires, and other organisms.

Learn more about 2-propanone here: https://brainly.com/question/29167289

#SPJ4

The given sample of matter has the lowest average kinetic energy is 50g at -55°C and 2.0 atm option - A is correct answer.

The force an object experiences as a result of motion is known as kinetic energy. An object can only accelerate if a force is applied to it. We have to put in the effort to use force. Once the work is done, energy is transferred to the object, which then moves at a new, constant speed.

Kinetic energy, which can be seen in the motion of an object or subatomic particle, is the energy of motion.

The average kinetic energy is the subject of the query. Thus, the only connection is to temperature. Kinetic energy increases with increasing temperature and decreases with decreasing temperature.

To know more kinetic energy visit:

https://brainly.com/question/494520

#SPJ1

Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory is 109.5°.

Germanium tetrachloride has an odd, acidic smell and is a colorless, fuming liquid. It is a necessary step in the creation of pure germanium metal. GeCl4 has seen a significant rise in utilization recently as a result of its employment as a reagent in the creation of fiber optics. GeO2 (germanium dioxide) may be immediately converted into germanium tetrachloride by dissolving the oxide in strong hydrochloric acid. To purify and remove the germanium tetrachloride from other products and contaminants, the resultant liquid is fractionally distilled. Rehydrolyzing the GeCl4 with deionized water will yield pure GeO2, which may then be reduced with hydrogen to get germanium metal.

complete question:Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory

109.5°

90°

120°

180°

< 109.5°

>109.5°

<120°

>120°

learn more about Germanium Refer:brainly.com/question/23745589

#SPJ4

The sodium is the anode of the cell while the magnesium is the cathode of the cell.

We know that in the cell, we are going to have just about two electrodes in the cell and we would have the cathode and the anode. We have to know that the cathode is the point by which the current would enter the cell and the cathode is the point from which the current would leave the cell.

Having said this, we should know that the investigation would have to take into account the reduction potentials of the magnesium as well as that of the sodium as these can be used in the construction of the cell that is under study here.

Hence, by consideration of the electrode potentials, we can see that the sodium would have to act as the anode of the cell and we would keep up with the magnesium as the cathode of the cell.

Learn more about cathode:https://brainly.com/question/4052514

#SPJ1

Thermal energy always moves from higher energy area to lower energy area over a temperature gradient.

Thermal energy is a form of energy by virtue of temperature of a body. As the temperature of a body increase its thermal energy increases. Thermal energy or heat energy transfers though medium and vacuum from higher energy area to lower energy area.

Heat transfer can be through conduction in solids, convection in fluids and by radiation through space. In conduction, the thermal energy easily transfers through a chain of close packed molecules.

In all these mode of heat transfer heat energy is flowing from a hotter region to a colder region.

Find more on thermal energy:

https://brainly.com/question/18989562

#SPJ1

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 2.66 mole of Al[tex]_2[/tex]O[tex]_3[/tex] form when 4.0 mol O[tex]_2[/tex] reacts.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.

4AI + 3O[tex]_2[/tex]→ 2Al[tex]_2[/tex]O[tex]_3[/tex]

moles of  Al =6.0 mol

moles of  O[tex]_2[/tex]=4.0 mol

Since oxygen is limiting reagent

moles of Al[tex]_2[/tex]O[tex]_3[/tex]=2/3×4.0

                       =2.66 mole

Therefore, 2.66 mole of Al[tex]_2[/tex]O[tex]_3[/tex] form when 4.0 mol O[tex]_2[/tex] reacts.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

108°C is the final temperature of the water after absorption of 1680 Joules of heat energy.

Temperature is a physical quantity used to measure the average kinetic energy of molecules in matter. This is measured with a thermometer or other device that measures the average kinetic energy of the molecules within the substance. The terms Celsius (°C), Fahrenheit (°F), or Kelvin are commonly used to describe temperature (K). Temperature can affect the physical state of matter.

By rearranging the equation gives:

ΔT = q/mc

Plugging in the given values,

ΔT = 1680/ (80.0 g × 4.184 J/g·C)

= 98°C.

Since the initial temperature was 10°C, the final temperature is:

ΔT = T₂ - T₁

98°C = T₂ - 10

T₂ = 108°C

To learn more about Temperature

https://brainly.com/question/25384702

#SPJ4

Two solitary sigma bonds are visible in the Lewis structure between the hydrogen and oxygen atoms.

The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea is the foundation of a Lewis structure. An oxygen atom, as an illustration, has six electrons in its outer shell.

The entire molecule's electron density is concentrated only around the core C in the CCl4 Lewis structure. Two nitrogen atoms are connected by a triple bond in the N2 Lewis structure.

In the reaction described above, PH3 is acting as a Lewis base because of the single electron on the P atom.

A double bond exists between two oxygen atoms in the Lewis structure of O2. Oxygen atoms must form two bonds in order to comply with the octet rule. The oxygen (red) and hydrogen (white) atoms are held together by powerful connections known as covalent bonds.

To learn more about Lewis structure refer to:

https://brainly.com/question/20300458

#SPJ1

100 cm is meter stick.

Centimeter is denoted by the (cm). It is a metric unit of the measurement which is used for measuring the length of an object.

Meterstick is a foldable ruler which is used to measure the length, and it is common in the construction industry. They are made up of wood or plastic and often they have a plastic or metal joints so that they can be folded together.  

A meter measuring stick, which is one meter (39.37 inches) long, it contains 100 centimeters. Thus, centimeter is equal to one-hundredth of a meter. The word centimeter comes from the late 18th-century. The word centimeter derived from the Latin root "centum"/ means "hundred" and the Greek root "metron", meaning "measure".

To know more about length here

https://brainly.com/question/30100801

#SPJ4

Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.

The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.

To learn more about carbocation please click on below link

https://brainly.com/question/13164680

#SPJ4

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature. In other words, while the mass is fixed and the volume is constant, the pressure a gas exerts is proportional to the temperature of the gas.

In the year 1808, French scientist Joseph Gay-Lussac created this law. Gay-law Lussac's can be expressed mathematically as follows:

P ∝ T ; P/T = k

Where:

P is the pressure that the gas is applying.

T is the gas's actual temperature, while k is a fixed value.

The tire pressure of a car increases after driving. This is due to the air inside the tires heating up as a result of friction (a contact force) between the tires and the road. Gay-Law Lussac's states that because the air cannot expand because the tires are effectively fixed-volume containers, the pressure rises.

To know more about  Gay-Lussac's law refer to:

https://brainly.com/question/2683502

#SPJ1

Following is the list of primary secondary and tertiary alcohols.

Alcohols are chemical compounds made composed of an alkyl or aryl group and a hydroxyl group (ROH). A fundamental alcohol is a hydroxyl carbon with just one R group. If it contains two R groups, it is a secondary alcohol, and if it has three R groups, it is a tertiary alcohol.

Look at the carbon bonded to OH to identify whether an alcohol is primary, secondary, or tertiary. The alcohol is primary, secondary, or tertiary depending on how many other carbons are connected to that carbon. It is methanol if there are three hydrogens and no carbons, which is a rare combination.

For the given formulas, following are different types of alcohols -

a) Primary Alcohols

b) Tertiary Alcohol

c) Secondary Alcohol

d) Primary Alcohol

e) Primary Alcohol

f) secondary Alcohol

To learn more about primary secondary and tertiary alcohols​ from given link

https://brainly.com/question/28108673

#SPJ1

Taking into account the reaction stoichiometry, a amount of 5.4 moles of oxygen are necessary to react completely with 7.2 moles of hydrogen.

In first place, the balanced reaction is:

C₃H₈ + 3 O₂  → 3 CO₂ + 4 H₂

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The following rule of three is used: If by reaction stoichiometry 4 moles of H₂ are produced by 3 moles of O₂, 7.2 moles of H₂ are produced by how many moles of O₂?

moles of O₂= (7.2 moles of H₂×3 moles of O₂)÷ 4 moles of H₂

moles of O₂= 5.4 moles

Finally, 5.4 moles of oxygen are required.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

The correct answer is option C: Low temperature only, because entropy decreases during freezing.

When a substance changes from a gas to a solid, the entropy (measure of disorder) of the system decreases. This is because the solid has a more ordered structure than the gas. The decrease in entropy is accompanied by a decrease in temperature and an increase in enthalpy (heat content).For a process to be spontaneous, the entropy change must be positive, so the freezing of methane is spontaneous only if the temperature of the surroundings is lower than the temperature of the methane. Thus, the heat released from the exothermic process will be absorbed by the surroundings, the temperature of the methane will decrease, and the entropy of the system increases, driving the process towards completion.

Learn more about entropy here:

https://brainly.com/question/15025401

#SPJ4

The complete question is :

Methane freezing is an exothermic process. Which of the following best describes the temperature conditions that are most likely to cause this spontaneous change? Because entropy increases during freezing, any temperature. Because entropy decreases during freezing, any temperature. Only at low temperatures because entropy decreases during freezing. Only at high temperatures, as entropy

Answer:

it’s 4

Explanation:

Mendeleev is given the most credit for the concept of a periodic table of the elements because he emphasized its usefulness in predicting the existence and properties of unknown elements.

This is referred to as a tabular arrangement of the chemical elements by increasing atomic number which displays the elements so that one may see trends in their properties.

It consists of a rows and columns arrangement of the chemical elements and each they are grouped according ti the similar features which are present in the elements.

Mendeleev was the scientist who was given the most credit for the concept of a periodic table of the elements despite others working on it previously as a result of his emphasis in its usefulness in predicting the existence and properties of unknown elements.

Read more about Periodic table here https://brainly.com/question/1173237

#SPJ1

Magnesium sulfate, or MgSO₄, weighs 6.68 g, and dissolves about 0. 965 L of the a 0. 0575 M solutions.

A solution is created when a solvent and a solute, two different compounds, are mixed together. When a salt and a solvents is mixed, a solution is created. Commonly, one substance will dissolve in another to create a solution, such as when salt dissolves in water. Nevertheless, a solution can be produced under any state of matter.

Molar mass MgSO₄ = 120.36 g/mol

You have a 0.0575 M solution

That is equal to 6.9207 g/L or 0.0575 mol/L * 120.36 g/mol.

But you want mass in 0.965 L

Mass equals 0.965 L times 6.9207 g/L, or 6.68 g.

To know more about Solution visit:

https://brainly.com/question/25326161

#SPJ4

The properties of the elements are repeated after 2 8 18 and 32 elements because these are the maximum number of the electrons that the four shells contains.

The electronic configuration of the elements in the periodic table are repeated because the maximum number of the electrons that the four shells can have are 2 8 18 and 32. the name of the four shells are K , L, M, N. The electronic configuration of the elements are repeated and due to this the properties of the elements are repeated.

Thus, the properties of the elements are increases because the electronic configuration are repeated in the periodic table.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

The isotope that when bombarded with nitrogen-15 yields the artificial isotope dubnium-260 plus 4 neutrons is californium-249.

Californium-249 is a heavy element and when bombarded with nitrogen-15, which is a light element, undergoes a nuclear reaction known as a "cold" fusion reaction. This reaction results in the formation of the artificial isotope dubnium-260, which has a higher atomic number than the starting element and the release of 4 neutrons.This process is known as a Nuclear Transmutation, which is a process in which one element is converted into another element by bombarding it with a beam of particles such as protons, neutrons, or other ions.

learn more about isotope here:

https://brainly.com/question/11394246

#SPJ4

Answer:

8.3 × 10⁴kg

Explanation:

Solution in the diagram

Answer:

Explanation:

There are several things to consider before using hot and cold compresses:

The condition being treated: Different conditions may require the use of hot or cold compresses. For example, hot compresses may be used to alleviate muscle pain, while cold compresses may be used to reduce swelling and inflammation.

The individual's sensitivity to temperature: Some people may be more sensitive to temperature changes and may need to use a compress that is not as hot or cold.

The duration of use: It is generally recommended to use hot compresses for no more than 20 minutes at a time, and cold compresses for no more than 15 minutes.

The potential for burns or frostbite: Hot compresses should not be used on skin that is broken or damaged, as they can cause burns. Cold compresses should not be applied directly to the skin for an extended period of time, as they can cause frostbite.

The individual's overall health: Individuals with certain medical conditions, such as circulation problems, should be careful when using hot and cold compresses and should consult with a healthcare professional before doing so.

Option B, Using an excess of aldehyde in the aldol-dehydration reaction is done primarily to ensure complete conversion of the reactants to the desired product.

An excess of aldehyde is used to ensure that there is a sufficient concentration of the aldehyde present in order to form the enolate anion, which is the reactive intermediate in the aldol-dehydration reaction. To achieve high yield: Using an excess of aldehyde allows for the formation of multiple enolate anions, which increases the chances of a double aldol-dehydration reaction taking place, resulting in the formation of the desired product. Using an excess of aldehyde helps aldol-dehydration to prevent this by reducing the exposure of the aldehyde to air.

Learn more about aldol-dehydration here:

https://brainly.com/question/23798009

#SPJ4

Polar endotherms must save heat, hence they usually have a significant surface area to volume ratio. The capacity to maintain blood is what makes heat conservation unique.

Vasoconstriction keeps it in the centre by decreasing blood flow to the outside (also known as peripheral vasoconstriction). An endotherm is an organism that uses heat produced by its internal biological processes rather than nearly exclusively relying on ambient heat to keep its body at a metabolically advantageous temperature. In thermodynamics, heat is defined as a kind of energy that crosses a thermodynamic system's boundary due to a temperature differential across the barrier. Heat is not present in a thermodynamic system.

Learn more about heat here

https://brainly.com/question/28302909

#SPJ4

the diagram that best represents the particle-level structure of steel as alloy is option (b).

Alloy, often known as an alloy, is a metallic material made up of two or more elements. Even though carbon, a nonmetal, is a crucial component of steel, the constituents of alloys are typically themselves metals.

Typically, melting the mixture of materials produces alloys. Early civilizations recognized the usefulness of alloys; brass (copper and zinc) and bronze (copper and tin) were particularly significant.

Steel is an alloy of iron and carbon. carbon range is upto 2 percent in the mixture.

In steel iron atoms are larger than carbon.

Learn more about alloy

brainly.com/question/3718729

#SPJ4

The reactant is iron (Fe) and the oxidizing agent is oxygen (O). This reaction results in the the formation of a compound known as iron oxide (Fe2O3), which is commonly referred to as rust. The reaction can be written as:

Fe + O2 --> Fe2O3

The oxidation process involves the loss of electrons from the Fe atoms, as oxygen gains electrons and is reduced. The electrons are transferred from the iron to the oxygen, resulting in the formation of iron oxide, which is an insoluble solid.

An oxidation-reduction reaction, or redox reaction, is a reaction in which there is a transfer of electrons between chemical species (the atoms, ions, or molecules involved in the reaction).

The reaction can be written as: [tex]\bold{Fe + O2 \Rightarrow Fe_2O_3}[/tex]

0.5 moles of carbon weigh 6.0055 grams.

One of the chemical elements is carbon. The letter C stands for carbon, and the letter g stands for grams. As a result, 0.5 moles of carbon per gram is equivalent to 0.5 moles of carbon per gram, 0.5 moles of carbon per gram, and 0.5 moles of C per gram.

Carbon has a 12.011 atomic mass. Thus, one mole of carbon has a mass of 12.011 grams (12.011 g/mol). We multiply 0.5 moles of carbon by 12.011 to get grams, and vice versa.

no. of Grams = Moles of Carbon x 12.011

                     =0.5 × 12.011 = 6.0055

0.5 moles of carbon equal 6.0055 grams.

To learn more about moles click here

https://brainly.com/question/15356425

#SPJ4

The complete question is

How many grams is 0.5 moles of carbon

Atomic Number of the periodic table is needed to determine why KCl tastes like NaCl.

What is the Periodic Table?

The Periodic Table is a tabular arrangement of the chemical elements organized by atomic number, electron configuration, and recurring chemical properties. It is one of the most important tools in chemistry, providing a useful framework to classify, systematize, and predict the properties of elements.

Atomic numbers are used to identify each element in the periodic table, and they are also used to determine the number of protons in the nucleus of an atom. The number of protons in an atom determines its chemical properties, and the similarity in the number of protons between two elements can explain why they have similar properties. In this case, the similarity in the atomic number of potassium (K, atomic number 19) and sodium (Na, atomic number 11) explains why the salts of both elements, potassium chloride (KCl) and sodium chloride (NaCl), taste the same.

Hence, Option D is correct.

To know more about the Periodic Table,

https://brainly.com/question/15987580

#SPJ4