do you know this???
ill give you 20 points

Answer:   Natural stone

Explanation:

Answer:

Natural stone

Explanation:

The most common natural stones used to make countertops include granite, marble, soapstone, and slate.

Answer: This form of energy is called Chemical Energy. Hope this helped!

Answer:

Explained below

Explanation:

When we eat food, our body gets chemical energy from it. Now, this chemical energy from the food is changed into some different energy forms that is useful to it. They include:

-Chemical to mechanical energy to aid in movement of muscles

- chemical to thermal energy to aid in regulating the body temperature.

- chemical to electrical energy to aid the brain in thinking.

Thus is similar to how a machine converts energy because machines also generate energy after being powered and convert to other forms of energy. For example, an alarm clock converts electrical energy to sound energy, hair dryer converts electrical energy to thermal/heat energy.

nanometers

to measure a virus you use nanometers

Answer:

The equivalent resistance of the combination is R/100

Explanation:

Parallel Connection of Resistances

If resistances R1, R2, R3,...., Rn are connected in parallel, the equivalent resistance is calculated as follows:

[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}+...+\frac{1}{R_n}[/tex]

The electric resistance of a wire is directly proportional to its length. If a wire of resistance R is cut into 10 equal parts, then each part has a resistance of R/10.

It's known the 10 parts or resistance R/10 were connected in parallel, thus the electric resistance is:

[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R/10}+\frac{1}{R/10}+\frac{1}{R/10}+...+\frac{1}{R/10}[/tex]

Note the sum consists of 10 equal terms. Operating on each term:

[tex]\displaystyle \frac{1}{R_e}=\frac{10}{R}+\frac{10}{R}+\frac{10}{R}+...+\frac{10}{R}[/tex]

The sum of 10 identical fractions yields 10 times each fraction:

[tex]\displaystyle \frac{1}{R_e}=10\frac{10}{R}=\frac{100}{R}[/tex]

Solving for Re needs to take the reciprocal of both sides of the equation:

[tex]R_e=R/100[/tex]

The equivalent resistance of the combination is R/100

Answer:

0.68 m

Explanation:

α = dL / L1*(dT)

dL = L1(dT) * α

Initial length, L1 = 100

Chang in Length =dL

α linear expansivity ; dL = change in length ; dT = change in temperature ; L1 = initial length

α of iron rod = 1.13 * 10^-5 k

dL = 100(40 - 10) * 1.13 * 10^-5

dL = 100(30) * 1.13 * 10^-5

dL = 3000 * 1.13 * 10^-5

dL = 3390 * 10^-5

dL = 0.0339 m

Error :

Distance measured = 2km = (2 * 1000) = 2000m

[Distance measured / (initial length + change in length)] × change in length

Error = (2000 / (100 + 0.0339)) * 0.0339

Error = (2000 / 100.0339) * 0.0339

Error = 19.993222 * 0.0339

Error = 0.6777702

Error = 0.68 m

Answer:

B

Explanation:

The force and friction cancel each other.

20N - 20N = 0N acting on the object.

Answer:

(a) Force and Pressure

Explanation:

Acc to the formula,

Force = Pressure/Area

Therefore it depends on force and pressure

Answer:

1. Newton's First Law of Motion

2.Newton's Third Law of Motion

3.Newton's Third Law of Motion

4.Newton's Second Law of Motion

5.Newton's Third Law of Motion

6.Newton's Second Law of Motion

7.Newton's First Law of Motion

Explanation:

Newton's First Law of Motion states that an object remain at rest or moving with a uniform velocity unless an external force acts on it. This is the law of inertia

Newton's Second Law of Motion states that the force of an objects is the product of mass and acceleration.

Newton's Third Law of Motion states that when two objects interact, a pair of forces act on the objects, and they are equal and act in opposite directions.

Answer:

Hiiiiiiii........where r u frm??

Answer:

The kinetic energy of the cell phone is 9J

Explanation:

The kinetic energy is the energy possessed by a body by virtue of motion.

The kinetic energy is expressed as

KE= 1/2m(v)²

Given data

Mass of cell phone m= 80g--to kg=80/1000= 0.08kg

Velocity of cell phone v= 15m/s

Substituting our given data we have

KE= 1/2*0.08(15)²

KE= (0.08*225)/2

KE=18/2

KE= 9J

Answer:

The age trend of the volcanoes is thought to be due to the way in which the islands are built on the moving sea floor of the North Pacific Ocean: the Pacific Ocean is mostly floored by a single tectonic plate (known as the "Pacific Plate") that is moving over the layer in the Earth known as the Asthenosphere

Explanation:

Explanation:

Hooke's Law: Fe = kx

x = Fe / k = (22.0N) / (4.00N/cm) = 5.50cm.

10.00cm + 5.50cm = 15.50cm

The new length of the spring is 15.50cm.

Answer:

a: solid

b:  liquid

c: liquid

d: gas

e: gas

f:  liquid

Explanation:

According to the forces of attraction, the states of matter in each case serially are as follows: solid, liquid,liquid,gas,gas and liquid respectively.

Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of same type.

Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.

The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter can neither be created nor destroyed rather is conserved at end of chemical change.

Learn more about matter,here:

https://brainly.com/question/12972782

#SPJ2

Given that,

Initial force, F = 12 N

First initial charge, q₁ = 3C

First new charge, q₁' = 6C

Initial distance, r = 15 cm

New distance, r' = 45 cm

To find,

The new force of attraction.

Solution,

The force between two charges is given by :

[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]

[tex]12=k\dfrac{3\times q_2}{15^2}\ ....(1)[/tex]

Let F' is the new force.

[tex]F'=k\dfrac{q_1'q_2'}{r'^2}[/tex]

[tex]F'=\dfrac{k\times 6\times q_2}{(45)^2}\ ...(2)[/tex]

As q₂ is same in this case.

Dividing equation (1) and (2) :

[tex]\dfrac{F}{F'}=\dfrac{k\dfrac{3q_2}{15^2}}{\dfrac{k\times 6\times q_2}{45^2}}\\\\\dfrac{12}{F'}=4.5\\\\F'=\dfrac{12}{4.5}\\\\F'=2.67\ N[/tex]

So, the new force of attraction is 2.67 N.

Answer:

c. nuclear fusión oh A. alpha decay

Answer:

it's answer is 5 kg

Answer:

5kg is your answer

I hope it helps mate

I will always help you understanding your assingments

have a great day

I am bored

#Captainpower:)

Answer:

hit it harder

Explanation:

Endicott Kendrick

AnswerC and D

Explanation:

Answer: C & D

Explanation: Aplex

Answer:

Osmosis is the movement of solvent particles across a semipermeable membrane from a dilute solution into a concentrated solution. ... Diffusion: Diffusion is the movement of particles from an area of higher concentration to lower concentration. The overall effect is to equalize concentration throughout the medium.

true because

brick: solid

milk: liquid

ice cube: solid

Answer:

Explanation:

a. From the information provided in the question, the blue liquid is a solution. This is because a solution is a type of homogeneous mixture (that has an evenly distributed solute in a solvent) which is the reason the liquid was said to be blue (and not immiscible blue solid in a liquid) but after been exposed to heat became just a blue solid. Typically, a solution has a solute and a solvent (combined), the solute here is the blue solid while the solvent is the liquid that made the combination a liquid.

b. Since the dish containing the liquid was placed on a windowsill, it can be assumed that the dish was subjected to heat from the sun which caused the liquid (in the solution) to evaporate after exposure to the heat from the sun (over the weekend) leaving the blue solid solute (of the solution) to remain in the dish. This can be referred to as evaporation to dryness in separation techniques (if the goal was to intentionally separate the solid solute from the liquid solvent).

Answer:

B. 1. The factors on which the mechanical advantage depends are the load, the effort, the distance moved by the load and the distance moved by the effort

2. The principle of a simple machine is the conversion of the direction and magnitude of a force input into one or more outputs of a either a different magnitude, or direction or both

3. A 75% efficiency of a simple machine means that the power of the frictional force is one quarter of the power of the input force

4. A lever is a simple machine that consists of a fulcrum over (or under) which a rigid beam can be  applied

5. There are three classes of lever

6. A pulley

Explanation:

B. 1. For simple machines, we have the Ideal Mechanical Advantage, IMA, given as follows;

[tex]IMA = \dfrac{F_r}{F_e} = \dfrac{d_e}{d_r}[/tex]

Where;

[tex]F_r[/tex] = The resistance force (The load)

[tex]F_e[/tex] = The effort force

[tex]d_e[/tex] = The distance moved by the effort

[tex]d_r[/tex] = The distance the load is moved

Therefore, the factors on which the mechanical advantage depends are the load, the effort, the distance moved by the load and the distance moved by the effort

2. The principle of a simple machine is the conversion of the direction and magnitude of a force input into one or more outputs of a either a different magnitude, or direction or both

3. The mechanical efficiency of a simple machine, η, can be expressed as follows;

[tex]\eta =\dfrac{P_{out}}{P_{in}}[/tex]

Where;

[tex]P_{out}[/tex] = The power at output

[tex]P_{in}[/tex] = The input power

[tex]P_{in}[/tex] = [tex]P_{out}[/tex] + [tex]P_{friction}[/tex]

[tex]P_{friction}[/tex] = The frictional force's power

Therefore, an efficiency of 75% means that we have;

[tex]P_{out}[/tex] = η × [tex]P_{in}[/tex] = 0.75 × [tex]P_{in}[/tex] = 0.75·[tex]P_{in}[/tex]

From which we have;

[tex]P_{in}[/tex] = [tex]P_{out}[/tex] + [tex]P_{friction}[/tex] = 0.75·[tex]P_{in}[/tex] + [tex]P_{friction}[/tex]

∴  [tex]P_{friction}[/tex] = [tex]P_{in}[/tex] - 0.75·[tex]P_{in}[/tex] = 0.25·[tex]P_{in}[/tex]

Therefore, 75% efficiency of a simple machine means that the power of the frictional force is 0.25 × (or one quarter of) the power of the input force

4. A lever is a simple machine that consists of a fulcrum over (or under) which a rigid beam can be  applied

5. There are three classes of lever

(a) First class lever (b) Second class lever and (c) Third class lever

6. A pulley

A pulley acts by lifting a load upward from a downward applied force.

Explanation:

B. 1. The factors on which the mechanical advantage depends are the load, the effort, the distance moved by the load and the distance moved by the effort

2. The principle of a simple machine is the conversion of the direction and magnitude of a force input into one or more outputs of a either a different magnitude, or direction or both

3. A 75% efficiency of a simple machine means that the power of the frictional force is one quarter of the power of the input force

4. A lever is a simple machine that consists of a fulcrum over (or under) which a rigid beam can be applied

5. There are three classes of lever

6. A pulley

Explanation:

B. 1. For simple machines, we have the Ideal Mechanical Advantage, IMA, given as follows;

IMA = \dfrac{F_r}{F_e} = \dfrac{d_e}{d_r}IMA=

F

e

F

r

=

d

r

d

e

Where;

F_rF

r

= The resistance force (The load)

F_eF

e

= The effort force

d_ed

e

= The distance moved by the effort

d_rd

r

= The distance the load is moved

Therefore, the factors on which the mechanical advantage depends are the load, the effort, the distance moved by the load and the distance moved by the effort

2. The principle of a simple machine is the conversion of the direction and magnitude of a force input into one or more outputs of a either a different magnitude, or direction or both

3. The mechanical efficiency of a simple machine, η, can be expressed as follows;

\eta =\dfrac{P_{out}}{P_{in}}η=

P

in

P

out

Where;

P_{out}P

out

= The power at output

P_{in}P

in

= The input power

P_{in}P

in

= P_{out}P

out

+ P_{friction}P

friction

P_{friction}P

friction

= The frictional force's power

Therefore, an efficiency of 75% means that we have;

P_{out}P

out

= η × P_{in}P

in

= 0.75 × P_{in}P

in

= 0.75·P_{in}P

in

From which we have;

P_{in}P

in

= P_{out}P

out

+ P_{friction}P

friction

= 0.75·P_{in}P

in

+ P_{friction}P

friction

∴ P_{friction}P

friction

= P_{in}P

in

- 0.75·P_{in}P

in

= 0.25·P_{in}P

in

Therefore, 75% efficiency of a simple machine means that the power of the frictional force is 0.25 × (or one quarter of) the power of the input force

4. A lever is a simple machine that consists of a fulcrum over (or under) which a rigid beam can be applied

5. There are three classes of lever

(a) First class lever (b) Second class lever and (c) Third class lever

6. A pulley

A pulley acts by lifting a load upward from a downward applied force.

Answer:

6.174N or roughly 6.2N

Explanation:

630g=0.63kg

F=m*g=0.63*9.8=6.174N

Answer:

i think b

Explanation:because they are so close

Answer:

198.20 N

Explanation:

Given that,

Mass of a heavy bag, m = 25 kg

The bag is attached to the ceiling until it makes an angle of 36 degrees to the vertical.

We need to find the force must the boxer exert on the bag. The force acting on the bag is given by :

[tex]F=mg\cos\theta\\\\=25\times 9.8\times \cos(36)\\\\=198.20\ N[/tex]

So, the required force is 198.20 N.