draw a skeletal (line-bond) structure of cis-1,4-dimethylcyclohexane. use a dash or wedge bond to indicate the relative relationship of substituents, where applicable.

If the isotopes of Cadmium were truly isotopes then their atomic number is the same but the atomic mass is different from one another.

An isotope is a species of atoms that have the same atomic number as well as the position of that atom in the periodic table. They are identical in chemical behavior but the physical properties of that atom due to different atomic masses. The atoms belong to the same element, having same atomic number which is expressed as Z but having different mass number A, this is called isotope. For example, Carbon atom has three isotopes i.e. carbon-12, carbon-13 and carbon-14. These elements of carbon having mass numbers 12, 13 and 14 respectively.

So we can conclude that the isotopes of Cadmium have same atomic number but different mass number.

Learn more about isotope here: https://brainly.com/question/14220416

#SPJ1

Pancakes are warmth due to conduction. When there is conduction in a system, there is change in temperature and energy.

When a system absorbs or loses warmth, the common kinetic energy of the molecules will exchange. Consequently, warmth transfer effects in a change inside the machine's temperature so long as the machine is not undergoing a segment trade.

The change within the inner power of a gadget is the sum of the heat transferred and the paintings carried out. The heat glide is same to the exchange within the inner energy of the device plus the work performed.

When the temperature of an object will increase, the average kinetic energy of its particles increases. When the average kinetic power of its debris will increase, the object's thermal energy increases. consequently, the thermal energy of an object will increase as its temperature increases.

Inner strength is the whole kinetic energy and capacity power of all the particles, atoms and molecules that make up a system. Heating adjustments the energy stored within the system by growing the strength of the debris that make up the system.

Learn more about temperature here:- https://brainly.com/question/19795404

#SPJ1

Non-volatile mixtures can be separated using a process called thin layer chromatography (TLC). Since acetaminophen has a hydroxyl group, it is more polar than phenacetin.

Since acetaminophen has a hydroxyl group, it is more polar than phenacetin. Phenacetin will be more soluble and migrate to the top than the polar component because we are employing a non-polar solvent.

Non-volatile mixtures can be separated using a process called thin layer chromatography. The experiment is carried out on a piece of glass, plastic, or aluminum foil that has been lightly covered with an adsorbent substance. Typically, silica gel, cellulose, or aluminum oxide are utilized as the substance.

Because acetaminophen is more polar than phenacetin and nonpolar molecules pass through silica gel more quickly than polar ones do, acetaminophen would have a lower Rf value.

To learn more about TLC separation refer to:

https://brainly.com/question/24031676

#SPJ9

In chemistry, the expression radicals is used to denote highly reactive substances that may contain unpaired electrons.

The expression chemistry radicals indicate the presence of substance that are unstable because they have unpaired electrons that tends to form bonds with other substances. For example, the chlorine molecule may suffer homolysis under UV light and thus generate two radicals of Cl with unpaired electrons.

Therefore, we can conclude that the chemistry radicals are highly unstable molecules that are characterized to have unpaired electrons and therefore are prone to form chemical bonds with other substances.

Learn more about the chemistry radicals here:

https://brainly.com/question/28269136

#SPJ1

Answer:

The tobacco industry has for many years used ammonia as a relatively innocuous additive to augment certain flavors, to economize on costs by expanding or “puffing” the cured leaf, to denicotinize (reduce the amount of nicotine in) tobacco, and even to reduce some of the carcinogens in tobacco smoke.

The student made a mistake in Step 2 by calculating the moles of magnesium chloride. The grams should be measured to make the solution.

In preparing a solution of a solid, we would need to follow a number of steps so that the desired concentration of the solution is what we would end up having.

The steps to be followed are;

1)  Gather a graduated cylinder, balance, and stirring rod.

2)  Calculate the mass  of magnesium chloride needed.

3) Add the water to reach 0.5 L of magnesium chloride solution and stir until dissolved.

4)  Label the solution 0.1 M MgCl2.

Learn more about preparing a solution:https://brainly.com/question/14667249

#SPJ1

A block of lead has dimensions of 4.50 cm by 5.20 cm by 6.00 cm, the density of lead  is mathematically given as

x= 11.30 g/cm^3

This is further explained below.

Generally, in order to determine the lead's specific gravity; To begin, we would use the formula to find out how much space the block of lead takes up;

Volume= length  * width  *  height

After plugging the values into the formula, we get the following:

Volume = 4.50 * 5.20 * 6.00

Volume = 140.4 cm^3

The next thing that we do is determine the density of lead;

After plugging the values into the formula, we get the following:

X = 11.30 g/cm^3

In conclusion, the density of lead is 11.30 g/cm^3

Read more about density

https://brainly.com/question/15164682

#SPJ1

CQ

A block of lead has dimensions of 4.50 cm by 5.20 cm by 6.00 cm. The block weighs 1587 g. From this information, calculate the density of lead.

The pre-partition salicylic acid solution (not mixing with chloroform) serves a second propose to act as a standard for linear regression analysis.

What is salicylic acid?

The chemical formula for salicylic acid is HOC6H4CO2H. It is a colorless, bitter-tasting substance that serves as both an aspirin precursor and metabolite (acetylsalicylic acid). It is a plant hormone that has been classified as an experimental teratogen by the EPA's Toxic Substances Control Act (TSCA) Chemical Substance Inventory. The word for willow tree in Latin is salix. Some anti-acne products contain it as an ingredient. Salicylates are the name for the salts and esters of salicylic acid.

The pre-partition salicylic acid solution (not combining with chloroform) acts as a benchmark for linear regression analysis in addition to serving as a comparison to the post-partition salicylic acid solution.

To know more about salicylic acid, go to link

https://brainly.com/question/14925906

#SPJ9

Explanation:

External force of 220 applied on a pistan of a cylinder containg 1.25 ammonia gas move 10cm as shown in diagram below

33.34 J of energy it would take to raise the temperature.

Specific heat = J/g C

(25.35 J/mole C) x (1 mole / 107.8682g) = 0.2350 J/g C

Energy required = (mass in grams)x(Specific heat)x(Temp final - Temp initial)

= (8.20 g)(0.2350 J/g C)(17.3°C) = 33.34 J (units cancel for /g C)

Heat capacity or specific heat is the quantity of heat consistent with unit mass that is required to elevate the temperature with the aid of 1°C. particular warmness is helpful in figuring out the processing temperatures and quantity of warmth vital for processing and may be helpful in differentiating between  polymeric composites.

The specific heat capacity (or in reality, the specific heat), that's the heat potential according to unit mass of a material. Experiments show that the transferred heat relies upon on three factors: (1) The change in temperature, (2) the mass of the system, and (3) the substance and phase of the substance.

The specific heat is the quantity of heat energy per unit mass required to elevate the temperature by way of one degree Celsius. The connection between warmth and temperature change is commonly expressed inside the form shown under where c is the unique warmness .

Learn more about Specific heat here:- https://brainly.com/question/21406849

#SPJ1

From the given table of ionic compounds:

Formula of compound: FeSO₄ (aq)

Cation formula : Fe²⁺

Number of moles of cation : 1

Anion formula : SO₄²⁻

Number of moles of anion: 1

Formula of compound: (NH₄)₂SO₄ (aq)

Cation formula : NH₄⁺

Number of moles of cation : 2

Anion formula : SO₄²⁻

Number of moles of anion: 1

Formula of compound: Pb(NO₃)₂ (aq)

Cation formula : Pb²⁺

Number of moles of cation : 1

Anion formula : NO₃⁻

Number of moles of anion: 2

Formula of compound: K₃PO₄ (aq)

Cation formula : K⁺

Number of moles of cation : 3

Anion formula : PO³⁻

Number of moles of anion: 1

Formula of compound: Fe₂(SO₄)₃ (aq)

Cation formula : Fe³⁺

Number of moles of cation : 2

Anion formula : SO₄²⁻

Number of moles of anion: 3

Ions are atoms or groups of atoms that possess an electric charge.

Cations are positively charged ions.

Cations are formed as a result of the loss of electrons.

Metallic elements usually form cations.

Anions are negatively charged ions that are formed as a result of electron gain.

Non-metals usually form anions.

Compounds that are composed of oppositely charged ions are known as ionic compounds.

When ionic composed are dissolved in water or in molten form, the ions are free to move.

The separation of the ions in ionic compounds is known as dissociation.

Learn more about ionic compounds at: https://brainly.com/question/2687188

#SPJ1

The wavelength of a yellow light with a frequency of 5.2 x 10¹4 Hz is 6 × 10⁻⁷.

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is typically defined in wireless systems in meters (m), centimetres (cm), or millimetres (mm) (mm).

When electromagnetic radiation such as radio waves, light waves, or infrared (heat) waves travel through space, they leave behind distinctive patterns. Each wave has a distinct size and shape. Wavelength is the separation between peaks (high points).

By measuring the distance between any two identical locations on adjacent waves, the wavelength can always be found. When a longitudinal wave is present, the distance between one compression and the next is measured to determine the wavelength.

γ = λf

λ = γ / f

= 3 × 10 ⁸ / 5 × 10 ⁴

= 0.6 × 10⁻⁶

λ = 6 × 10 ⁻⁷

Thus, The wavelength of a yellow light with a frequency of 5.2 x 10¹4 Hz is 6 × 10⁻⁷.

To learn more about wavelength, follow the link;

https://brainly.com/question/4112024

#SPJ2

Answer:

5.8 x 10^-7

Put in this answer and got it correct

The volume of a pond being studied for the effects of acid rain that is 35 kiloliters (kL) if converted in microliters is found to be 3.5 x [tex]10^{10}[/tex]

Acid rain is the actual form of precipitation that includes acidic components like nitric or sulfuric acid that fall from the atmosphere on the earth's surface.

Acid rain refers to rain or any other type of precipitation that is unusually acidic, that is, contains large amounts of hydrogen ions.

The acid rains are considered harmful as they corrode and destroy these infrastructures, and plants and cause irritation to the organisms.

The volume of a pond that is being studied for the effects of acid rain is 35 kiloliters (kL).

There are a total of 1,000 liters (L) in 1 kL and 1 x [tex]10^6\\[/tex] microliters (mL) in 1 L.

Then 35 kL (1,000 L/ 1kL) (1 x 10^6 microliters / 1 L) = 3.5 x [tex]10^{10}[/tex] microliters

The volume of this pond calculated in microliters is 3.5 x [tex]10^{10}[/tex] microliters.

To know more about acid rain, visit:

https://brainly.com/question/22143130

#SPJ9

The element's Atomic number , which has 5 protons, 6 neutrons, and 2 electrons (the atomic number is the number of protons) =  5

the number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei. As a result, the atomic number is also the number of protons, which in a neutral atom is always equal to the amount of electrons.

Protons and neutrons are added to determine an element's mass number. The only number that may change while maintaining the identity of an element is the number of neutrons for that element (because the atomic number is the number of protons).

Mass number = protons + neutrons

Given:

5 protons,

6 neutrons

2 electrons

Atomic number = ?

We know that the Mass number = protons + neutrons:

Mass number = protons + neutrons

Mass number = 5 + 6:

Mass number = 11

The element's Atomic number , which has 5 protons, 6 neutrons, and 2 electrons (the atomic number is the number of protons) =  5.

To know more about Atomic number  visit:

https://brainly.com/question/16858932

#SPJ10

Answer:

hi there, are u okay . what do u need help for

Answer:

Animal cells each have a centrosome and lysosomes, whereas plant cells do not. Plant cells have a cell wall, chloroplasts and other specialized plastids, and a large central vacuole, whereas animal cells do not

Explanation:

An isotope of neon with formula 20/10 Ne will possess 10 protons, 10 neutrons and 8 valence electrons i.e. 10, 10, 8.

Isotopes are two or more forms of an element where the atoms have the same number of protons, but a different number of neutrons within their nuclei. Thus, isotopes have the same atomic number but a different mass number.

According to this question, an isotope of neon, an inert gas, has a formula of 20/10 Ne. The mass number of this isotope is 20 while the atomic number is 10.

This means that the number of neutrons is 20 - 10 = 10 while the number of protons is 10. Neon like all other noble gas has a filled shell and a valence electron of 8.

Learn more about isotope at: https://brainly.com/question/11680817

#SPJ1

The oxygen molecule needs to cross three phospholipid bilayers.

The process of ATP synthesis in which electrons are transported from NADH or FADH2 to oxygen is known as oxidative phosphorylation. The process of cellular respiration ends at this stage. Chemiosmosis and the electron transport chain are two interrelated processes that make up oxidative phosphorylation. As electrons move from one molecule to the next in the electron transport chain, energy is released throughout the process, which is then utilized to create an electrochemical gradient. However, during chemiosmosis, ATP is produced using the energy stored in the gradient.

Oxygen is found at the end of the electron transport chain, where it takes electrons and picks up protons to make water.

Therefore, it follows that a molecule of oxygen must travel through three phospholipid bilayers, which are represented by the cell membrane and the external and internal membranes of the mitochondria, in order for it to go through the electron transport chain.

Read more about Oxidative phosphorylation:

brainly.com/question/28809568

#SPJ9

The activity of the enzyme used for the synthesis of oxaloacetate from pyruvate and carbon dioxide is increased by acetyl-coenzyme A which acts as an allosteric activator.

After glycolysis, pyruvate is changed over into acetyl-coenzyme A in arrange to enter the citric corrosive cycle.

Oxaloacetate synthesis from pyruvate is a vital anaplerotic response that makes oxaloacetate from pyruvate. The protein could be a mitochondrial protein containing a biotin prosthetic gather, requiring magnesium or manganese and acetyl-coenzyme A.

Pyruvate carboxylase could be a biotin-containing enzyme that catalyzes the arrangement of oxaloacetate within the nearness of an allosteric activator, acetyl-coenzyme A, from pyruvate.

Furthermore, small pyruvate is decarboxylated to acetyl-coenzyme A by the pyruvate dehydrogenase complex. Or maybe, pyruvate is changed over to the 4-carbon oxaloacetate by pyruvate carboxylase.

This switch happens fundamentally in reaction to an increment in free fatty acids oxidation. Free fatty acids from adipocytes are promptly oxidized within the liver.

Learn more about acetyl CoA at

https://brainly.com/question/28163012

#SPJ9

In A, two types of molecules are generated. Two monosaccharides are bonded together by a condensation reaction in which glycoside bonds form between the monosaccharides and release the water molecule. In a specific, A reaction, fructose, and glucose molecules combine to generate sucrose (disaccharide).

In the case of the B reaction, two distinct amino acids (monomers) combine to generate a third molecule, a dipeptide; the bond formed between these two molecules is known as a peptide bond (amine group of first amino and cool group of second amino acid). This reaction is also condensation and results in the formation of water molecules. The fact that both create water molecules and dimers from two monomers is shared in this region.

Monosaccharides (from Greek monos: single, saccharin: sugar) are the most fundamental molecules (monomers) from which all carbohydrates are formed.

They are typically water-soluble white crystalline solids. Despite their name, only a few monosaccharides have a sweet flavor (sugars).

Sucrose, the most common table sugar, is a disaccharide made up of one molecule of each of the two monosaccharides D-glucose and D-fructose.

Monosaccharides include glucose (dextrose), fructose (levulose), and galactose.

To learn more about monosaccharides the given link:

brainly.com/question/13416862

#SPJ9

The true statements about the electron sea model is;

The term bonding has to do with the situation in which there is a combination of the atoms that come from two or more elements. Now let us note that formation of a bond means that the properties of the elements would cease to be individually observed once a bond has been formed.

Having said this, let us talk about the metallic bond. The metallic bond is the kind of bond that occur between the positive ions of the metal and the electron cloud or sea that have left the ions. It then follows that the bond is formed by the electrostatic interference that occurs between the electron sea and the positive ions.

Learn more about electron sea model:https://brainly.com/question/12147661

#SPJ1

The volume of gas in the tank is determined as 1.78 L.

The volume of gas in the tank is calculated by applying idle gas law as follows;

PV = nRT

where;

n = reacting mass / molar mass

n = (300 g) / (3 x 16 g)

n = (300 g) / (48 g/mol)

n = 6.25 moles

The volume of the gas is calculated as follows;

V = nRT/P

V = (6.25 x 8.314 x 214.25)/(6250)

V = 1.78 L

Thus, the volume of ideal gas increases with increase in temperature.

Learn more about volume of gas here: https://brainly.com/question/25736513

#SPJ1

Answer: the molecular altatude of the supercalifragilistic gene should expand by 100%,

L

L

L

L

L

L

L

L

L

L

L

Explanation:

Answer: both are a way of heat

Explanation: see you can see the there is a lot of heat in the oven but like the sun thermal energy is so its heat but it was made naturally

Answer:The path of a rock that begins in magma and ends in sedimentary rocks is called the rock cycle.

Explanation:Did this a while ago.Hope i helped :)

The sun is made up of hydrogen and helium because these two gases are responsible for fusion reaction which generate light and heat energy.

Scientists use the device of spectroscopy in order to determine the composition of the Sun. The Sun is made up of light elements such as hydrogen and helium. It is composed of 74% hydrogen atom and 25% helium. In the core of the sun, gravitational forces produce huge pressure and temperatures. The temperature of the sun in this layer is 27 million degrees Fahrenheit that is equals to 15 million degrees Celsius. Hydrogen atoms are fuse together creating helium atom. This process is known as nuclear fusion reaction.

So we can conclude that the sun is made up of hydrogen and helium so that the fusion reaction is initiated.

Learn more about sun here: https://brainly.com/question/15837114

#SPJ1

An  enzyme do not change delta G.

1)A reaction that releases free energy is known as an exergonic reaction. This type of reaction can happen spontaneously, unaffected by external forces, because it releases energy rather than absorbing it.

2) Exergonic reactions are those in chemistry where the change in free energy is negative. A system's total amount of available energy is measured by its free energy; negative changes indicate that energy has been released, whilst positive changes indicate that energy has been stored.

Enzyme only changes activation energy .Enzyme do not change delta G so, this hypothesis does not fit with what is know about the reaction.  

To learn more about Exergenic reaction refer

https://brainly.com/question/11064909?referrer=searchResults

#SPJ9

Answer:

a rise in tempature

Explanation:

look it up

The mass number of the third isotope, given the data from the question is 34

The mass number of the third isotope can be obtained as illustrated below:

Relative atomic mass = [(Mass of 1st × Abundance of 1st) / 100] + [(Mass of 2nd × Abundance of 2nd) / 100] + [(Mass of 3rd × Abundance of 3rd) / 100]

32.133 = [(32 × 92.4) / 100] + [(33 × 1.9) / 100] + [(Mass of 3rd × 5.7) / 100]

32.133 = 29.568 + 0.627 + (Mass of 3rd × 0.057)

32.133 = 30.195 + (Mass of 3rd × 0.057)

Collect like term

32.133 - 30.195 = Mass of 3rd × 0.057

1.938 = Mass of 3rd × 0.057

Divide both sides by 0.057

Mass of 3rd = 1.938 / 0.057

Mass of 3rd = 34

Thus, we can conclude that the mass of the 3rd isotope is 34

Learn more about isotope:

https://brainly.com/question/4924030

#SPJ1

Missing part:

See attached photo

The noble gases have similar chemical properties because they have the same number of valence electrons.

The noble gases are the gases that are found in the last group of the periodic table. These are the gases that have been said to be unreactive under normal conditions. Thee have been found to react only under stringent conditions as we can see.

Given the fact that the octet rule states that an element that contains eight electrons in its outermost shell would be unreactive and all the noble gases have complete octets hence the noble gases are unreactive.

Learn more about noble gases:https://brainly.com/question/11764545

#SPJ1