Estimate the net charge at pH=7. Assume the pKa values given in the table above. Term____

Thermal energy increases before the water begins to boil.

Thermal energy is produced when the atoms and molecules in matter vibrate faster due to an increase in temperature. As the average kinetic energy of its particles increases, the thermal energy of the object increases.

After reaching water at its boiling point thermal energy remain same because temperature remain constant after reaching once at boiling point. Thermal energy is directly proportional to temperature. Hence, chef will notice two phenomena during water begins to boil.

Learn more about thermal energy visit:

brainly.com/question/7541718

#SPJ4

The name of an isotope that has 14 protons and 14 neutrons is Silicon-28

The total number of protons and neutrons in an isotope's nucleus is referred to as the mass number. This is due to the fact that each proton and neutron has a mass of one atomic mass unit.

We may get the mass of the atom by multiplying the total number of protons and neutrons by 1 amu.

The atomic number Z is 14 if there are 14 protons. Z being the quantity of large positively charged nuclear particles by definition.

Silicon is what we have if Z is the atom's identity and Z=14. The isotope of the element is 28S because the element may contain more or fewer neutrons than Z, where neutrons are heavy, neutrally charged nuclear particles.

Silicon-28 is the isotope with 14 protons and 14 neutrons.

Learn more about neutron at brainly.com/question/29248303

#SPJ4

The quantity of matter in a body,object,or substance is B. Mass.

A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely believed to be related to the amount of matter in a physical body.

It is the most fundamental characteristic of matter and one of the fundamental quantities in physics. Mass is a term used to describe how much matter is present in a body. The kilogram is the SI unit of mass (kg). A body's mass does not alter at any point in time.

Learn more about mass on:

https://brainly.com/question/837939

#SPJ1

a) The change in concentration of each reactant and product as a function of reaction rate is − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt.

b) The rate as to how fast is [HI] decreasing is 4 mol/[tex]L^{-s}[/tex].

A chemical reaction is the process by which a single or more reactants change into a single or more new products. Chemical building blocks or compounds make up substances.

Given balance chemical reaction,

H₂(g) + I₂(g) → 2HI(g)

a) The rate of reaction in terms of the change in concentration of each reactants & products is

Rate = − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt

b)  where 2, 1, 1 and stoichiometric coefficients of HI, H₂ and I₂ respectively.

where - sign indicates consumption and + ve sign indicates formation

given d[I₂]/dt =2

-d[HI]/2dt= 2

-d[HI]/dt = 4 mol/[tex]L^{-s}[/tex].

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ4

All of the elements in group 18 are relatively un-reactive whereas those in group 17 are very reactive because group 18 elements have complete outer shell and group 17 needs only one electron to complete octet.

In the periodic table , the group 18 elements are called as the noble gases. the group 18 elements have the complete octet that mean the complete valence shell and they are stable due to which they are un reactive and also called as inert gases.

In the group 17 , the elements are called as halogens. the group 17 elements have the incomplete outer shell and they only need one electron to complete their octet due to which they are very reactive.

To learn more about periodic table here

https://brainly.com/question/29788210

#SPJ4

The ratio of effusion rates of Sulphur dioxide and methane is 0.5

To calculate the rate of diffusion of gas, we use Graham's Law.

This law states that the rate of effusion or diffusion of gas is inversely proportional to the square root of the molar mass of the gas. The equation given by this law follows the equation:

Rate of Diffusion ∝ 1 ÷ √molar mass of the gas

We are given:

Molar mass of Sulphur dioxide = 64.066 g/mol

Molar mass of methane = 16.04 g/mol

By taking their ratio, we get:

Rate of SO₂ ÷ Rate of CH₄ = √MCH₄ ÷ √MSO₂

Rate of SO₂ ÷ Rate of CH₄ = √16.04 ÷ √64.066

Rate of SO₂ ÷ Rate of CH₄ = 0.5

Hence, the ratio of rate of effusion of Sulphur dioxide and methane will be 0.5

Answer: It is a Covalent Bond

Explanation:

In a chlorine molecule, the atoms bonded by a covalent bond as a chlorine atom needs one electron to complete its octet and shares one electron with another chlorine atom.

Answer:

mono covalent bonds

Explanation:

Cl shares 1 electron with another Cl atom

so it makes Cl2 a mono covalent compound

Many of these, including cheese, gelatin, and various inks, are commonplace. Like the other classes, mixtures of solids and liquids may be separated in many ways.

science has been actively involved in the pursuit of this goal since it is crucial for a variety of liquids. When two or more distinct substances physically join, a mixture is produced that can be dispersed back into its constituent parts. a bowl of various candies, a pile of various leaves, steel, and sugar syrup A gelatin is any two or more different types of particles together. These particles are physically bound together rather than reacting chemically with one another. Two or more reactants are changed into one or more separate products during a chemical reaction. Alternately, we might assume that a chemical reaction rearranges the atoms of the reactants to create new products.

To learn more about gelatin please click on below link

https://brainly.com/question/28046370

#SPJ4

Equation I cannot be divided by another factor as it will introduce errors in the equation.

Errors in chemical analysis result when there is a difference between observed value and the true value.If the magnitude of errors is large , it results in decrease in accuracy, reproducibility, and precision.

There are three types of errors:1) random error 2) systematic error 3) human error.The cause of random errors are difficult to quantify while the human errors can be minimized by taking a range of readings to reduce the error.

Errors while measuring boiling point may be human errors while noting down the boiling temperature or instrumental or systematic error if there is a fault in the thermometer.

Learn more about errors,here:

https://brainly.com/question/15810279

#SPJ1

The orcas will compensate the lack of the oxygen that being respired for the minute at time and with the high amount of the hemoglobin in the blood.

The orcas will be able to slow down their heart beat when they are diving . this will decrease the amount of the oxygen demand but this not good for them it will be very stressful on their body.

The hemoglobin will increase the efficiency of their respiration.  The orcas are the sea mammals . the orcas will be dive for the long period of the time in to the water. They will easily breathe through blowhole.

To learn more about orcas here

https://brainly.com/question/29632391

#SPJ4

A 16. 81 gram sample of an organic compound containing C, H and O is analyzed by combustion analysis and 21. 33 grams of CO₂ and 5. 822 grams of H₂O are produced. In a separate experiment, the molar mass is found to be 104. 1 g/mol.  The empirical formula is CH₃   and molecular formula is C₇H₇O₂₁

The empirical formula can be calculate as follows:

The reaction can be write

CxHyOz  → CO₂ + H₂O

As a result, we may state that there are two O-atoms for every one C-atom (12g) in CO2 (32g).

This indicates that the ratio is 12g C/32g O.

The molar mass of CO₂ is 44 g/mole.

(12/44) x 33 = 9 g

There are 9 grams of carbon in every 33 grams of CO₂

The same can be done for water:

In H₂O, each element is represented by two H atoms and one O atom. 2 g H and 16 g O.

[2 g H / 18 g H2O] are present in 5. 822 g of water

(2/18)x 5.822= 0.6468 g

The initial sample had 14.16 g of sample, 9 g of C, and 0.6468 g of H, which resulted in 34.3532g of oxygen.

Determine the amount of moles.

C: 9.0 g / 12.0 g/mol = 0.75 mol

H: 0.6468 g / 1.0 g/mol = 0.6468 mol

O: 34.3532g / 16.0 g/mol =  2.14 mol

Then we divide by the smallest number

C: 0.75 mol / 0.6468 mol = 1

H: 0.6468 mol / 0.6468 mol= 1

O:  2.14 mol/ 0.6468 mol =  3

so the empirical formula will be CH₃

Determine the molecular formula

mass molecular formula / mass of empirical formula = n

We have to multiply the empirical formula by n to get the molecular formula.

104.1 /15 = 7= n

This means the  molecular formula = C₇H₇O₂₁

Learn more about empirical formula at https://brainly.com/question/2263904

#SPJ4

In the E2 mechanism, the rate of the reaction is affected by the strength of the bond between the leaving group and the carbon atom, as well as the stability of the resulting carbocation intermediate.

The order of the leaving groups in terms of increasing reaction rate would be:

Slowest: R-F

R-F is a relatively weak bond and the fluoride ion is a very poor leaving group, so the reaction rate would be slow.

R-Br

R-Cl

R-I

Fastest: R-I

R-I is a relatively strong bond and the iodide ion is a very good leaving group, so the reaction rate would be fastest.

R-Cl

R-Br

In short, the stability of the leaving group decreases as the atomic number of the atom increases, and the bond dissociation energy of the leaving group also decreases. So, it is Iodide>Chloride>Bromide>Fluoride.

Learn more about leaving group here:

https://brainly.com/question/28014622

#SPJ4

Answer:

according to the Oxford dictionary, metallurgy the branch of science and technology concerned with the properties of metals and their production and purification

Explanation:

Explanation:

The entire scientific and technological process used for isolation of the metal from its ores is known as metallurgy.

Hey stan.

Hope it's help ^_^

To solve this we must be knowing each and every concept related to atom and its discoveries. Therefore, electron was discovered by J.J Thomson.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. Electron was discovered by J.J Thomson.

Therefore, electron was discovered by J.J Thomson.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ1

Chlorine atoms that are present in 0.650 mol of ca(clo4)2 is : 7.83 *10^23.

Mass in grams of 1 mole of the substance is called the molar mass of a substance. We can obtain a substance's molar mass by summing the molar masses of its component atoms. We can use the calculated molar mass to convert between mass and number of moles of a substance.

As we know, one mole of any atom is equivalent to the Avogadro's number or 6.02 x 10²³ particles.

0.650 * 6.023 * 10^23 * 2

= 7.83 *10^23 chlorine atoms.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ4

Normal

BeI2 + SrSO4 → SrI2 + BeSO4

Complete ionic:

Be2+ + 2I- + Sr2+ + SO42- → Sr2+ + 2I- + Be2+ + SO42-

Net ionic:

Be2+ + 2I- → Sr2+ + 2I- + Be2+

The complete ionic equation for this reaction is the same as the normal equation, except that the reactants and products are written as their respective ions.

The net ionic equation is the same as the complete ionic equation, except that the spectator ions, which are ions that appear on both the reactant and product sides, are omitted.

In this reaction, strontium sulfate and beryllium iodide react to form strontium iodide and beryllium sulfate. The spectator ions are Sr2+ and 2I-, which appear on both sides of the equation and cancel out, leaving the net ionic equation.

For more questions like Ionic equation click the link below:

https://brainly.com/question/30006628

#SPJ4

Answer:

a.LiF

b.BeO

c.MgF2

d.AlCl3

e.Be3N2

Explanation:

So, the main thing with chemical formulas is making sure that the cation and anion's charges will cancel out if you add the total sum of charges together.

For A, halogens only form -1 charge ions, so F will have to be F-. Lithium, being a group 1 element, will form an ion of Na+. Therefore, the formula is NaF.

For B, Beryllium is a Group 2 element that forms +2 charges, while Group 16 elements like O form -2 charges. Therefore, BeO would work as the sum of charges will equal zero.

For C, Magnesium is a Group 2 element, so it has a +2 ion, while fluorine is a halogen, so a -1 charge for the F- ion. So, you need two F- ions to balance out one Mg2+ ion. So, it is MgF2

For D, Aluminum is a Group 13 element, which can form +3 charges. Therefore, Al can form a +3 charge, so that means for Cl- (recall it is a halogen,) it needs three Cl- ions to cancel one Al3+ ion. So, it is AlCl3.

For E, Group 15 elements like N form -3 ions, so the ion for nitrogen is N3-. Beryllium is a Group 2 element, so it is Be2+. The common multiple of 3 and 2 is 6, so you need to find a way to have a +6 and -6 charge. So, three Be2+ ions (totaling a net charge of +6) need to cancel with two N3- ions (again a net charge of -6) to form the compound. Therefore, it is Be3N2.

57.5% Cu2(CO3)(OH) (OH) Other elements are also present in addition to copper.

To get the mass percent of copper in malachite (Cu2(OH)2CO3), apply the following formula:

Malachite (Cu2(OH)2CO3) has a molar mass of 2x63.5% + 2(16+1) + 12 + (16x3) = 127 + 2(17) + 12 + 48 = 127 + 34 + 12 + 48 = 221g/mol.

Cu2(OH)2CO3 has a Cu mass of 2 x 63.5g, or 127g.

The mass-based fraction of Cu in Cu2(OH)2CO3 is calculated as Cu2(OH)2CO3 mass per mol mass multiplied by 100 = 127/221 x 100 = 57.5%.

Malachite Cu2(OH)2CO3 has 57.5% of its mass in copper.

To learn more about Malachite's please click on below link

https://brainly.com/question/15461613

#SPJ4

Answer:

180 N + 180 N = 360N

Explanation:

since they are all force of different side, you will add them.

When a sample of a substance was heated strongly in a crucible, the sample increased in mass. This is evidence that a chemical change has taken place.

In a closed system, when no heat or energy is applied, the mass of a substance will remain the same. But, when heated at high temperatures, the average kinetic energy of the particles of a substance increase due to which the particles will move faster, and collide with each other and take up more space. There will be transfer of energy due to application of heat. As a result of this the mass of the sample also increases.

Hence, option D is correct

To know more about increase in mass here

https://brainly.com/question/29586339

#SPJ4

The space left by the free electron in an atom after it has lost one electron is known as a hole.

The term "free electron" refers to an electron that has broken loose from its "parent" atom and is now free to move about the material at random. A vacancy, also known as a hole, is created in the atom when a bonded electron in a lattice atom breaks free. The number of electrons in an atom's valence shell, or n shell in this example, has a significant impact on the electrical properties of the element that the atom represents. The least force of attraction is felt by the electrons in the valence shell since they are the furthest from their nucleus.

To learn more about atom click here https://brainly.com/question/1566330

#SPJ4

A ring stand is used to hold glassware devices during laboratory procedures.

Ring stands and accessories can make your lab experiments much easier if you are studying chemistry or physics.
        A ring stand and its accessories are versatile pieces of equipment that will improve your hands-on activities by allowing you to conveniently heat beakers, flasks, test tubes, and other glassware over an alcohol burner, as well as set up physics apparatus such as moveable pulleys and inclined planes.
        Each accessory is supported by a heavy base and an upright rod on the ring stand. To support additional equipment, a ring support is attached to the stand. Glassware is supported above an alcohol burner by wire gauze resting on the ring. To support funnels, crucibles, and evaporating dishes, the triangle rests on the ring. Burettes and test tubes are held in the burette clamp.

Know more about Ring Stand here:

https://brainly.in/question/13111005

B) Rubidium is a highly reactive element.

Rubidium is a highly reactive element due to its low ionization energy, which makes it easily lose electrons and form compounds. It is considered to be one of the most reactive alkali metals.

When it comes into contact with water or air making rubidium is highly flammable. It can ignite spontaneously in the air and reacts violently with water to produce rubidium hydroxide and hydrogen gas.

Being noticeably more reactive than potassium but less so than cesium, it is likely to react with substances that are dangerous with sodium or potassium more forcefully. When rubidium is exposed to air or dry oxygen, it ignites, mostly generating oxide.

Learn more about Rubidium here: https://brainly.com/question/19949181

#SPJ4

If the feedback loop of the knee reflex was cut off at any points along its path, then there will be no response of knee reflex.

Its results in harm to any part of your reflex arc, which can be due to a basic knee-medicinal condition. Healthcare suppliers can disclose hyporeflexia by spouting your knee with a rubber hammer.

If your doctor taps on a band and there isn't a reflexive movement in the muscle, it's a sign of knee-health matter. Usually, absent reflexes are created by an issue with the nerves in the tendon and muscle. You may have other muscle symptoms along with areflexia, like weakness, or atrophy.

So we can conclude that A decline reflex reply can be related to peripheral knee-nervous system disorders.

Learn more about reflex here: https://brainly.com/question/17261833

#SPJ1

The amount of hydrogen monochloride that is produced at STP is 152 mL.

The balanced chemical reaction can be depicted as follows:

H₂ + Cl₂ -----> 2 HCl

According to stoichiometry, When one mole of hydrogen reacts with one mole of chlorine, it yields two moles of hydrogen monochloride. Stoichiometry defines the relationship between the quantities of reactants and products before, during, and following chemical reactions

If, 2 g of Hydrogen reacts with 71 g of chlorine to form 73 g of Hydrogen Chloride.

Therefore,  if 10 g reacts with 142 g of chlorine, the HCl produced will be 152 g or 152 ml of HCl.

To learn more about stoichiometry check the link below:

https://brainly.com/question/14935523

#SPJ4

The leftovers of [tex]C_2H_2[/tex] will be 6 moles while the leftover of [tex]O_2[/tex] will be zero.

In the originally balanced equation of the reaction, 2 moles of [tex]C_2H_2[/tex] and 5 moles of [tex]O_2[/tex] react completely to produce 4 moles of [tex]CO_2[/tex] and 2 moles of [tex]H_2O[/tex]. This equation is balanced with no reactant left.

Now, 8 moles of [tex]C_2H_2[/tex] were made to react with 5 moles of [tex]O_2[/tex] in the second reaction. The mole ratio of the two reactants for complete reactions is 2:5. Thus, [tex]C_2H_2[/tex] has been supplied in excess.

Since only 5 moles of [tex]O_2[/tex] is available, only 2 moles of [tex]C_2H_2[/tex] will be consumed. Thus, 6 moles of [tex]C_2H_2[/tex] will be left while the oxygen will be completely consumed. That is, the amount of [tex]O_2[/tex] left would be zero.

More on mole ratio of reactants can be found here: https://brainly.com/question/15288923

#SPJ1

Answer:

Benzene is a hydrocarbon with molecular formula of C6 H12 including 3πbond which are rotating

benzene is also a aromatic but ethene is not a aromatic

Explanation:

Answer: No, one mole of benzene (C6H6) and one mole of ethene (C2H4) will have the same number of molecules (6.02x10^23 benzene molecules and 6.02x10^23 molecules of ethene). However, one molecule of benzene consists of 12 atoms, while one molecule of ethene consists of 6 atoms.

The simplest formula for a compound is made up of 1.677 grams of iron and 0.640 grams of oxygen would be FeO.

What the question is asking here is the empirical formula of an oxide of iron made up of 1.677 grams of iron and 0.640 grams of oxygen. The empirical formula shows the formula in the simplest whole-number ratio of the atoms.

Iron (Fe) = 1.677 grams

Oxygen (O) = 0.640 grams

Converting the masses to moles:

Fe = 1.677/56 = 0.0299 mol

O = 0.640/16 = 0.0400 mol

Now, let's divide by the smallest mole:

Fe = 0.0299/0.0299 = 1.0

O = 0.0400/0.0299 = 1.3

Thus, the empirical formula of the oxide of iron is FeO.

More on empirical formulas can be found here: https://brainly.com/question/14044066

The phase and temperature changes that will occur if you heat 50.0 g of H2O in its solid state at -8 C until it all vaporizes is that the solid H2O will transition to a liquid state at 0 C and then to a vapor at 100 C.

Vapor is an aerosolized suspension of tiny liquid particles that are released into the air. It is made up of a mixture of water and other chemicals, such as nicotine, propylene glycol, and other flavorings. Vapor is produced when heated liquid, such as e-liquid, is turned into a vapor. This vapor can be inhaled and exhaled in a manner similar to smoking a traditional cigarette, which is why vapor has become an alternative to traditional smoking.

To learn more about vapor
https://brainly.com/question/422363
#SPJ4

Propanol, because its molecules can form hydrogen bonds with water molecules.

Reason:

Therefore, propanol is more soluble in water than Ethane.

Learn more about Propanol here:

https://brainly.com/question/25876043

#SPJ4