Favourite sport Frequency Fraction of people Baseball 5 A Swimming 3 B a) Work out the fractions that replace A and B in the table, in their simplest forms. b) Copy and complete the pie chart below to show this information. Remember to label your pie chart and give it an appropriate title.​

Given that the absolute value of the price elasticity of demand for Good X is 0.5, this indicates that the demand for Good X is inelastic. Now, let's analyze the effect of a 10 percent decrease in the price of Good X.

1. Calculate the percentage change in quantity demanded: Multiply the price elasticity of demand (0.5) by the percentage change in price (-10%).
  0.5 * (-10%) = -5%

2. Since the result is negative, this implies that the quantity demanded will increase by 5% due to the 10% decrease in price. This corresponds to option (b) in your list.

3. To determine the effect on revenues, we'll consider both the price and quantity changes. The price decreased by 10%, and the quantity demanded increased by 5%.

4. Calculate the new revenue: Initial revenue (100%) + price change (-10%) + quantity change (5%) = 95% of the initial revenue.

This means that there will be a 5% increase in revenues from the sale of Good X after the price decrease, which corresponds to option (c) in your list. So, the correct answer is (b) A 5% increase in the quantity demanded of Good X, and (c) A 5% increase in revenues from the sale of Good X.

To know more about absolute value  visit:

https://brainly.com/question/17360689

#SPJ11

The domain and range of the graphs shown above include the following:

Domain: [2, ∞]                 Domain: [-∞, ∞]

Range: [1, ∞]                    Range: [-2, ∞]

Domain: [-∞, ∞]                 Domain: [1, ∞]

Range: [-∞, ∞]                   Range: [-∞, 2]

In Mathematics and Geometry, a domain refers to the set of all real numbers (x-values) for which a particular function (equation) is defined.

In Mathematics and Geometry, the horizontal portion of any graph is used to represent all domain values and they are both read and written from smaller to larger numerical values, which simply means from the left of any graph to the right.

By critically observing the graphs shown in the image attached above, we can reasonably and logically deduce the following domain and range for graph 1:

Domain = [2, ∞].

Range = [1, ∞] or y ≥ 1

Read more on domain here: brainly.com/question/9765637

#SPJ1

Answer:

-1/2, 1/2, -1, -2, 2

Step-by-step explanation:

a_1 = 2

a_2 = -1

a_n+2 = a_n+1/a_n

a_3 = a_2/a_1 = -1/2

a_4 = a_3/a_2 = -1/2 / (-1) = 1/2

a_5 = a_4/a_3 = 1/2 / (-1/2) = -1

a_6 = a_5/a_4 = -1 / (1/2) = -2

a_7 = a_6/a_5 = -2 / (-1) = 2

a_8 = a_7/a_6 = 2/(-2) = -1

a_9 = a_8/a_7 = -1/2

etc.

The area under the t-distribution with 10 degrees of freedom to the right of t = 2.32 is smaller than the area under the standard normal distribution to the right of z = 2.32.

The t-distribution has heavier tails compared to the standard normal distribution. As the degrees of freedom decrease, the t-distribution becomes more spread out, resulting in a larger area in the tails compared to the standard normal distribution.

Therefore, the area under the t-distribution with 10 degrees of freedom to the right of t = 2.32 is smaller than the area under the standard normal distribution to the right of z = 2.32.

To know more about t-distribution refer here

https://brainly.com/question/17469144#

#SPJ11

A study conducted by a large city hospital aimed to examine the connection between the distance employees travel to work and the number of unauthorized days they are absent. Data was collected from a sample of 10 employees.

To analyze the relationship between the distance traveled to work and the number of unauthorized absences, a scattergram can be used. A scattergram, also known as a scatter plot, is a graphical representation that displays the relationship between two variables. In this case, the distance (in miles) traveled to work would be plotted on the x-axis, while the number of unauthorized absences per year would be plotted on the y-axis. Each data point representing an employee's distance and corresponding number of unauthorized absences would be plotted on the scattergram. By examining the resulting scattergram, it would be possible to observe any patterns or trends in the data, such as whether there is a positive or negative correlation between the distance traveled and the number of unauthorized absences.

Learn more about y-axis here: https://brainly.com/question/30901684

#SPJ11

The explicit definition of the given geometric sequence is a(n) = 909 (4/3)ⁿ⁻¹.

Given is a geometric sequence,

a(n) = 909, if n = 1

a(n) = 4/3 a(n-1) if n > 1

The explicit formula for a geometric sequence is,

a(n) = a(1) rⁿ⁻¹

Here a(1) is the first term and r is the common ratio.

Here, a(1) = 909

r = a(2) / a(1) = 4/3 × 909 / 909 = 4/3

Explicit formula is,

a(n) = 909 (4/3)ⁿ⁻¹

Hence the required definition is a(n) = 909 (4/3)ⁿ⁻¹.

Learn more about Explicit Formulas here :

https://brainly.com/question/15174001

#SPJ1

Check the picture below.

The equation y = 30 - 2.5x best models the relationship shown in the following scatterplot: C. scatterplot C.

In Mathematics and Statistics, there are different characteristics that are used for determining the line of best fit on a scatter plot and these include the following:

By critically observing the scatter plots using the aforementioned characteristics, we can reasonably infer and logically deduce that scatterplot C best models the relationship given by y = 30 - 2.5x because the data points would be equally divided on both sides of the line with a negative slope of -2.5 and a y-intercept of 30.

Read more on line of best fit here: brainly.com/question/12284501

#SPJ1

The series ∑[n=1 to ∞] [tex]8e^n[/tex] / (3n(n+1)) is convergent.

To determine whether the series ∑[n=1 to ∞] [tex]8e^n[/tex] / (3n(n+1)) is convergent or divergent, we can apply the ratio test.

Using the ratio test, we calculate the limit as n approaches infinity of the absolute value of the ratio of the (n+1)-th term to the n-th term:

lim(n→∞) |[tex](8e^(^n^+^1^) / (3(n+1)(n+2))) / (8e^n / (3n(n+1)))[/tex]|

Simplifying the expression:

lim(n→∞) |[tex](8e^(^n^+^1^) * 3n(n+1)) / (8e^n * 3(n+1)(n+2))[/tex]|

The common factors cancel out:

lim(n→∞) |e * n / (n+2)|

As n approaches infinity, the ratio tends to e, which is a finite non-zero value.

Since the ratio is a constant (e), which is less than 1, the series is convergent by the ratio test.

Learn more about Convergent

brainly.com/question/28202684

#SPJ11

The present value of the ordinary annuity is approximately $16,132.07 (rounded to the nearest cent).

To find the present value of an ordinary annuity, we can use the formula:

PV = PMT * ((1 - (1 + r)^(-n)) / r)

Where PV is the present value, PMT is the payment amount per period, r is the interest rate per period, and n is the number of periods.

In this case, the payment amount per year (PMT) is $1900, the interest rate per year (r) is 8% (or 0.08 as a decimal), and the number of years (n) is 17.

Plugging these values into the formula, we have:

PV = $1900 * ((1 - (1 + 0.08)^(-17)) / 0.08)

Calculating this expression, we find:

PV ≈ $1900 * ((1 - 0.320713) / 0.08)

PV ≈ $1900 * (0.679287 / 0.08)

PV ≈ $1900 * 8.49108875

PV ≈ $16,132.07

Therefore, the present value of the ordinary annuity is approximately $16,132.07 (rounded to the nearest cent).

learn more about "interest ":- https://brainly.com/question/25720319

#SPJ11

Answer:

-13

Step-by-step explanation:

(9 - 15 + 12 - 19)

= 9 - 15 + 12 - 19

= -6 + 12 - 19

= 6 - 19

= -13

When a class interval is expressed as 100 up to 200, it means that the data is grouped into intervals or ranges, and the first interval starts at 100 while the last interval ends at 200.

When dealing with large sets of data, it is often more convenient to group the data into intervals or classes. Each interval is a range of values, and the frequency of data falling within that range is recorded. The class interval "100 up to 200" means that the first interval starts at 100, and the range continues up to but does not include 200.

This means that the first interval will include all values greater than or equal to 100 and less than 200. The exact size of the interval (i.e., the width) is not specified in this expression, so it could be any value that covers the range between 100 and 200.

For example, the interval could be 100-199, 100-199.99, or any other width that covers the specified range.

For more questions like Data click the link below:

https://brainly.com/question/30456204

#SPJ11

The average number of repairmen present at any given time in the auto shop can be calculated using Little's Law, which states that the average number of entities in a system is equal to the average arrival rate multiplied by the average time spent in the system. In this case, the average arrival rate is 10 cars per day, and the average time spent in the system (technician working on a car) is 7 days. Therefore, the average number of repairmen present at any given time is:

Average number of repairmen = Average arrival rate * Average time spent = 10 cars/day * 7 days = 70 repairmen

The state space diagram of the Continuous-Time Markov Chain (CTMC) for this scenario can be represented as follows:

State 0: No cars in the system

State 1: 1 car being repaired

State 2: 2 cars being repaired

...

State 80: 80 cars being repaired (maximum capacity)

The transitions between states are determined by the arrivals and departures of cars. Each arrival increases the state by 1, and each departure decreases the state by 1.

The probability that the car shop has to turn away customers due to the lack of repairmen available can be determined by calculating the probability of the system being at the maximum capacity (80 cars being repaired). This can be calculated using the formula for the steady-state probability distribution of a CTMC. Without further information about the arrival and departure rates, it is not possible to provide an exact probability.

To ensure that the probability of turning away customers is less than 1%, the auto shop would need to recruit enough repairmen to increase the maximum capacity of the system. This would depend on the arrival and departure rates, and a detailed analysis would be required to determine the exact number of repairmen needed.

If the turned away cars are kept on a waiting list instead of being rejected, the waiting time for a car to be repaired would depend on the number of cars in the system and the rate at which repairs are completed. To ensure that the waiting time for a car is less than 2 days, the auto shop would need to recruit enough repairmen to reduce the average time spent in the system to less than 2 days. The exact number of repairmen required would depend on the arrival rate of cars and the rate at which repairs are completed, and a detailed analysis would be necessary to determine the specific number.

learn more about average here

https://brainly.com/question/24057012

#SPJ11

The canonical representative of [tex]4^2^4^1[/tex] mod 385 is equal to 4.

To compute the remainders using Fermat's Little Theorem, we need to know that it states: If p is a prime number and a is any integer not divisible by p, then [tex]a^(^p^-^1^)[/tex]≡ 1 (mod p).

Now, let's apply the Chinese Remainder Theorem to find the canonical representative of 4^241 mod 385:

We have the following congruences:

[tex]4^2^4^1[/tex] ≡ 4 (mod 5)

[tex]4^2^4^1[/tex] ≡ 4 (mod 7)

[tex]4^2^4^1[/tex] ≡ 4 (mod 11)

Using the Chinese Remainder Theorem, we can combine these congruences to find the canonical representative modulo 385:

Let x be the canonical representative of [tex]4^2^4^1[/tex] mod 385.

We have:

x ≡ 4 (mod 5)

x ≡ 4 (mod 7)

x ≡ 4 (mod 11)

By solving this system of congruences, we find that x = 4.

Learn more about Fermat's Little Theorem

brainly.com/question/30906239

#SPJ11

Σan represents the sum of terms an in a sequence indexed by n. It is a concise way to express the total sum of the sequence, starting from a specified initial value of n and adding up to a specified final value.

The symbol Σ, pronounced as "sigma," is used to represent the summation notation in mathematics. When we write Σan, it means we are summing up the terms of a sequence (an) starting from a specified initial value of n and continuing up to a specified final value.

To explain further, let's consider an example. Suppose we have a sequence (an) given by a1, a2, a3, ..., an. The summation Σan represents the sum of these terms:

Σan = a1 + a2 + a3 + ... + an.

The value of n can vary depending on the context or the problem at hand. It could be a fixed value, or it could be a variable that ranges over a certain set of values. The notation allows us to express the sum of a potentially infinite number of terms by indicating the pattern of the terms and the range of values for n.

Learn more about summation notation here:

https://brainly.com/question/10690182

#SPJ11

Step-by-step explanation:

Equilateral triangle: All sides are equal in length. Isosceles triangle: Two sides are equal in length. Scalene triangle: All sides have different lengths.

Answer: Logistic regression is a very popular, statistically sound, probability-based classification algorithm that employs supervised learning.

The Gaussian random variable using that the probabilities are, (a) P(X > 4) = 0.9332 (b) P(|X| < 22) = 1.0000 (c) P(4 < X < 16) = 0.6827 (d) P(X > 19 | X > 10) = 0.2525 (e) The pdf of Y = (2X + 5) is fY(y) = (1/12√(2π)) * exp(-(y-25)^2 / 288) (f) The value of a such that P(X > 1) = 0.10 is a = 16.83.

(a) To find P(X > 4), we standardize the value and use the z-table to find the corresponding probability. P(X > 4) is equivalent to P(Z > (4 - 10)/6) = P(Z > -1) = 0.9332.

(b) P(|X| < 22) represents the probability that the absolute value of X is less than 22. Since the standard deviation of X is 6, this probability is equal to 1.0000 since the range [-22, 22] is much wider than the range covered by X.

(c) To find P(4 < X < 16), we standardize the values and calculate the area under the curve between the corresponding z-scores. P(4 < X < 16) is equivalent to P((-6/6) < Z < (6/6)) = P(-1 < Z < 1) = 0.6827.

(d) P(X > 19 | X > 10) represents the probability that X is greater than 19, given that X is already greater than 10. This is equivalent to P(X > 19) / P(X > 10). We calculate P(X > 19) using the z-score and find P(X > 19) = P(Z > (19 - 10)/6) = P(Z > 1.5) = 0.0668. P(X > 10) can be calculated similarly as P(Z > 0) = 0.5. Therefore, P(X > 19 | X > 10) = 0.0668 / 0.5 = 0.2525.

(e) To find the pdf of Y = (2X + 5), we can use the transformation technique. We substitute y = (2x + 5) into the pdf of X, and perform the necessary calculations to obtain the pdf of Y: fY(y) = (1/12√(2π)) * exp(-(y-25)^2 / 288).

(f) To find the value of a such that P(X > 1) = 0.10, we can use the standardization process. P(X > 1) is equivalent to P(Z > (1 - 10)/6) = P(Z > -1.5). Using the z-table, we find that P(Z > -1.5) = 0.9332. To obtain a probability of 0.10, we need to find the z-score that corresponds to P(Z > z) = 0.10. From the z-table, this z-score is approximately -1.28. We can then solve for a using the standardization formula: (a - 10)/6 = -1.28. Solving for a gives a ≈ 16.83.

Learn more about Gaussian random variable  here:

https://brainly.com/question/31994651

#SPJ11

The graph of the function f(x)=log5(x) can be stretched vertically by multiplying the output of the function by 8.

This can be represented as 8f(x)=8log5(x). Similarly, the function can be shifted to the right by 4 units by replacing x with x-4, resulting in f(x-4)=log5(x-4). Finally, the function can be shifted up by 2 units by adding 2 to the output of the function, resulting in f(x)+2=log5(x)+2. Combining all of these transformations, we get the new function g(x)=8log5(x-4)+2. This function will have the same basic shape as the original function, but will be vertically stretched, shifted to the right, and shifted up. The horizontal asymptote of the function will still be y=0, and the x-intercept will be at x=1. The vertical asymptote will also be at x=0, but the graph will be shifted to the right by 4 units.

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

Widget Town is now a monopoly. It can raise its prices to earn a larger profit.

The situation described is known as a monopoly, where Widget Town becomes the sole producer of widgets in the market.

As a monopoly, Widget Town can take advantage of its position by raising prices to earn a larger profit. With no competition, customers have limited alternatives and may have to accept higher prices.

However, it's important to note that this can lead to reduced consumer choice and potential negative consequences.

It is not advisable for Widget Town to split into two firms to increase competition, as the situation described explicitly states that it is now the last remaining widget producer.

for such more question on monopoly

https://brainly.com/question/28841635

#SPJ11

To find a numerical approximation for P(W - E[W] < 0.01), where W = X1 + ... + X20 - (Y1 + ... + Y20) and Xi, Yi are independent random variables uniformly distributed in the unit interval [0, 1], we can use simulation methods such as Monte Carlo simulation.

Monte Carlo simulation involves generating a large number of random samples and using these samples to estimate probabilities. In this case, we can simulate the random variables Xi and Yi, calculate W for each simulation, and count the number of times W - E[W] is less than 0.01. Dividing this count by the total number of simulations gives us an approximation for P(W - E[W] < 0.01).

To perform the simulation, we generate 20 random numbers from a uniform distribution for each Xi and Yi, calculate W for each simulation by summing the Xi values and subtracting the Yi values, and then compare W - E[W] to 0.01. By repeating this process a large number of times (e.g., 10,000 simulations), we can estimate the probability.

By running the Monte Carlo simulation and calculating the ratio of simulations where W - E[W] < 0.01 to the total number of simulations, we obtain a numerical approximation for P(W - E[W] < 0.01).

Learn more about Monte Carlo simulation here:

https://brainly.com/question/31873520

#SPJ11

The probability that a patient testing positive for avian influenza with this test is actually infected with avian influenza is approximately 0.803 or 80.3%

To determine the probability, we can use Bayes' theorem. Let's assume that we have 10,000 patients tested. Out of these, 4% (or 400) patients will be infected with avian influenza, and the remaining 96% (or 9,600) will not have the infection.

Out of the 400 infected patients, the test will correctly identify 98% of them, which is 392 patients. However, there will be a false positive rate of 1% among the 9,600 non-infected patients, which is 96 patients.

So, the total number of patients testing positive will be 392 + 96 = 488. Out of these, 392 patients are truly infected, which gives us the probability of a patient testing positive being infected as 392/488 ≈ 0.803.

Therefore, the probability that a patient testing positive for avian influenza with this test is actually infected with avian influenza is approximately 0.803 or 80.3%.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

If events A and B are mutually exclusive with probabilities P(A) = 0.4 and P(B) = 0.5, respectively, then the probability of their intersection, P(A ∩ B), is equal to zero.

If events A and B are mutually exclusive, it means that they cannot occur simultaneously. In other words, if event A happens, event B cannot happen, and vice versa. Mathematically, this can be represented as:

P(A ∩ B) = 0

The probability of the intersection of mutually exclusive events is always zero because there is no overlap between the events.

In the given scenario, the probability of event A is 0.4 (P(A) = 0.4) and the probability of event B is 0.5 (P(B) = 0.5). Since events A and B are mutually exclusive, we know that P(A ∩ B) = 0.

Therefore, the probability of the intersection of events A and B, denoted as P(A ∩ B), is equal to zero.

This result makes sense intuitively because if two events are mutually exclusive, they cannot occur at the same time. So the probability of both events happening together is zero.

For more such questions on mutually exclusive visit:

https://brainly.com/question/30644106

#SPJ11

Answer:

4 yards

Step-by-step explanation:

The volume of a rectangular prism is length*width*height.

Let's set the missing height as "x".

Then, we find this equation:9*10*x=360

90x=360

x=4

Therefore, the height of this rectangular prism is 4 yards.

Feel free to tell me if I did anything wrong! :)

The circle has a radius of 4 units.

Let the circle's radius be $r$ and its centre be $(a,b)$.

The circle's centre must be on the line $x=a$ that passes through $(0,2)$ perpendicular to the $y$-axis since the circle is tangent to the $y$-axis at $(0,2)$.

We may formulate an equation involving the distance between $(8,0)$ and $(a,b)$, which is equal to the radius $r$, because the circle passes through $(8,0)$. The distance formula gives us:

$\sqrt{(a-8)^2+b^2}=r$

We know that $a$ is the distance between the centre and the $y$-axis, which is equal to the radius $r$, because the centre is on the line $x=a$.

As a result, we have:

$a=r$

This can be used to solve the previous equation for:

$\sqrt{(r-8)^2+b^2}=r$

Squaring both sides of the equation, we get:

$(r-8)^2+b^2=r^2$

Simplifying, we get:

$r^2-16r+64+b^2=r^2$

$b^2=16r-64$

Since $(0,2)$ lies on the circle, we have:

$(0-a)^2+(2-b)^2=r^2$

Substituting $a=r$ and simplifying, we get:

$r^2-4r+4+b^2=r^2$

$b^2=4r-4$

Now we have two equations involving $r$ and $b^2$, which we can solve simultaneously. Substituting $b^2=16r-64$ from the first equation into the second equation, we get:

$16r-64=4r-4$

Solving for $r$, we get:

$r=4$

Therefore, we know radius of this circle will be 4 units.

To know more about tangent of circle refer here:

https://brainly.com/question/10053881?#

#SPJ11

Using the empirical rule, approximately 22 data points would be expected to fall within ± 1 standard deviation of the mean from a sample of 32. Therefore, the correct option is option 1.

Using the empirical rule, we need to determine approximately how many data points would fall within ± 1 standard deviation of the mean from a sample of 32.

The empirical rule states that for a normal distribution:

1. Approximately 68% of the data falls within ± 1 standard deviation of the mean.

2. Approximately 95% of the data falls within ± 2 standard deviations of the mean.

3. Approximately 99.7% of the data falls within ± 3 standard deviations of the mean.

Since you asked about ± 1 standard deviation, we will focus on the first point. We have a sample of 32 data points, and we want to know how many of these data points fall within ± 1 standard deviation of the mean.

To find this, we can use the percentage provided by the empirical rule (68%) and multiply it by the total number of data points in the sample (32).

0.68 * 32 = 21.76

Since we cannot have a fraction of a data point, we can round the result to the nearest whole number.

Approximately 22 data points would fall within ± 1 standard deviation of the mean from a sample of 32, according to the empirical rule which corresponds to option 1.

Learn more about Standard deviation:

https://brainly.com/question/24298037

#SPJ11

To approximate the surface area of one slipcover for Davea's topiaries, we need more information regarding the shape and dimensions of the topiaries.

To calculate the surface area of a slipcover, we need information about the shape and dimensions of the topiary. Depending on the specific shape, whether it is a cone, cylinder, or other geometric form, the surface area formula will differ. For example, if the topiary is a cone, the surface area formula would involve the radius and slant height of the cone. If it is a cylinder, the surface area formula would involve the radius and height of the cylinder. Without these details, it is impossible to provide an accurate estimate of the surface area of the slipcover. However, in general, the slipcover would cover the entire surface of the topiary, excluding the base, to provide adequate protection against frost.

To learn more about surface area click here: brainly.com/question/29298005

#SPJ11

∠2 and ∠6 are alternate angles.

∠7 and ∠5 are corresponding angles.

We have,

Alternate angles:

Alternate angles are pairs of angles that are located on opposite sides of the transversal and between the two parallel lines.

Alternate angles are also congruent, which means they have equal measures.

So,

From the figure,

lines x and y are parallel.

This means,

∠2 and ∠6 are alternate angles.

Corresponding angles:

Corresponding angles are pairs of angles that occupy the same relative position at each intersection when a transversal cuts two parallel lines.

Corresponding angles are congruent, which means they have equal measures.

So,

From the figure,

lines x and y are parallel.

This means,

∠7 and ∠5 are corresponding angles.

Thus,

∠2 and ∠6 are alternate angles.

∠7 and ∠5 are corresponding angles.

Learn more about corresponding angles here:

https://brainly.com/question/1597341

#SPJ1

∠NOM ≅ ∠OPM - all right angles are congruent

∠OMN ≅ ∠PMO - corresponding angles in similar triangles are congruent

ΔMNO ≅ ΔMOP -  angle-angle

a/x = c/a

The corresponding angles congruency property of similar triangles states that if two triangles are similar, then their corresponding angles have the same measures.

This property is based on the fact that when two lines are parallel, the angles they form with a transversal are congruent.

This property is used to prove that two triangles are similar.

Learn more about reflexive property at: https://brainly.com/question/29119461

#SPJ1

The Balmer series is a set of spectral lines in the visible region of the electromagnetic spectrum that are emitted by excited hydrogen atoms. The theoretical wavelengths of the Balmer series lines can be calculated using the Balmer-Rydberg equation:

1/λ = R_H (1/2² - 1/n²)

where λ is the wavelength of the emitted photon, R_H is the Rydberg constant for hydrogen, and n is an integer representing the energy level of the hydrogen atom.

For the Balmer series, n always starts at 2, so the equation can be simplified to:

1/λ = R_H (1/4 - 1/n²)

The Rydberg constant for hydrogen is given by:

R_H = 1.0974 x 10^7 m^-1

Therefore, the theoretical wavelength of the Balmer series lines can be calculated using the equation:

λ = (1/R_H) * (1/(1/4 - 1/n²))

where n is an integer from 3 to infinity.

In this lab, we can use the Balmer-Rydberg equation to calculate the theoretical wavelength values of the Balmer series lines and compare them to the experimental values obtained from the spectral lines observed in the lab.

The value of R given in the equation you provided is the Rydberg constant for hydrogen, which is equal to 1.0974 x 10^7 m^-1.

To know more about balmer series refer here:

https://brainly.com/question/31833283?#

SPJ11