Explanation:
frequency= velocity/ wavelength
= 340/1.36
=250
How many moles of NaOH are present in 12.0 mL of 0.110 NaOH?
Moles: ___________
Answer:
0.00132moles
Explanation:
1000ml of NaOH contain 0.110 moles
12ml of NaOH contain (12*0.110)/1000 moles
= 0.00132 moles
6. What is the molarity of 175 mL of solution containing 2.18 grams of NazS04-10H2O?
Answer:
[tex]Molarity\,\,of\,\,the\,\,solution\,\,is\,\,S=0.039M[/tex]
Explanation:
[tex]W=2.18 g\\M=322g\\V=175mL=0.175L\\\\S=\frac{W}{MV} \\=>S=\frac{2.18}{322*0.175} \\So,S=0.039M[/tex]
Hope you have understood this.....
ask me if you have any confusion.....
if you liked it pls mark it as the brainliest
A student performs a titration of 51.0 mL of a phosphoric
acid (H PO) solution of unknown concentration with a
standardized 1.25 M NaOH solution. The titration requires
26.2 mL of base to reach the third equivalence point. What is
the concentration of the H3PO4
solution?
From the information available in the question, the concentration of the acid is 0.21 M.
H3PO4(aq) + 3NaOH(aq) -----> Na3PO4(aq) + 3H2O(l)
Volume of acid(VA) = 51.0 mL
Concentration of acid (CA) = ?
Volume of base (VB) = 26.2 mL
Concentration of base (CB) = 1.25 M
Number of moles of acid (NA) = 1
Number of moles of base (NB) = 3
Using the formula;
CAVA/CBVB = NA/NB
CAVANB = CBVBNA
CA = CBVBNA/VANB
CA = 1.25 M × 26.2 mL × 1/51.0 mL × 3
CA = 0.21 M
The concentration of the acid is 0.21 M.
Learn more: https://brainly.com/question/8646601
10. Select the more polar bond in each of the following pairs: a) C and N or C and o b) N and F or N and O.
After spending some time in the stomach, the food is sent to the blank
Answer:
the small intestine where nutrients are absorbed.
You have three gases in a mixture where P1= 100 kPa, P2 = 50 kPa, and P3 = 75
kPa. What is the total pressure of the gas mixture?
A. 225 kPa
B. 25 kPa
C. 75 kPa
D. None of the above
Answer:
Ptotal=P1+P2+… +Pn. + P nExplanation:
its c
Can you help me with these questions?
I already did 3 which are the highlighted ones. Help me with the ones that are not.
how many nuetrons are in the nucleous of an atom number of 25?
Answer:
I believe there are 30
Explanation:
How many grams of sodium acetate NaCH3COO, , must be dissolved to prepare 200. mL of a 0.216 M aqueous solution of the salt? g
Answer:
Explanation:
You have to find the mass in the mole before the molarity and then in the mole.
How many atoms are in mercury (I) phospate?
The chemical formula is (Hg2)3(PO4)2
A)11
B)14
C)15
D)16
Mercury (I) phosphate with the chemical formula (Hg2)3(PO4)2 has 16 atoms.
Number of Hg atoms = 2x3 = 6Number of P atoms = 2 x 1 = 2Number of O atoms = 4x2 = 8Sum of all the atoms = 6+2+8
= 16 atoms
More on the number of atoms in a molecule can be found here: https://brainly.com/question/19140379
1.An object that produces electrical energy through redox reactions is called ____________.
oxidation
reduction
galvanic/voltaic cell
2.Which species undergoes oxidation?
Pb
Cu
[tex] \huge \bf༆ Answer ༄[/tex]
Question : - 1
An object that produces electrical energy through redox reactions is called Galvanic cell
Question : - 2
Pb undergoes Oxidation
[tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]
PLS HELP= BRAINLIEST AND POINTS
Question 11 pts
What is the term for the "invisible force" that holds you to Earth's surface?
Group of answer choices
gravity
mass
attraction
matter
Flag question: Question 2
Question 21 pts
Once an object is in motion, what type of energy is being used?
Group of answer choices
kinetic energy
gravity
potential energy
Flag question: Question 3
Question 31 pts
The Moon's mass is lower than that of Earth, thus its gravity is ____ Earth’s gravity.
Group of answer choices
less than
more than
the same as
Flag question: Question 4
Question 41 pts
When you roll a ball across a rug, what slows it to a stop?
Group of answer choices
Friction resists the ball’s forward motion.
The rug doesn’t have enough momentum to keep the ball rolling.
The rug doesn’t have enough force to keep the ball rolling.
The ball isn’t moving fast enough.
Flag question: Question 5
Question 51 pts
A championship swimmer swims 20 meters in 10 seconds. What is his speed?
Group of answer choices
20 m/s
2.0 m/s
0.5 m/s
200 m/s
Flag question: Question 6
Question 61 pts
Without an unbalanced force, an object will ____.
Group of answer choices
change its direction
maintain its velocity
stop moving altogether
change its speed
Flag question: Question 7
Question 71 pts
Which of the following indicates how fast something is moving?
Group of answer choices
speed
gravity
force
inertia
Flag question: Question 8
Question 81 pts
Which of Newton's laws is also known as the law of inertia?
Group of answer choices
Newton's third law
Newton's first law
Newton's second law
Flag question: Question 9
Question 91 pts
Which object would need the greatest force to overcome its inertia?
Group of answer choices
a sports car
a bicycle
a dump truck
a tennis ball
Flag question: Question 10
Question 101 pts
Which of the following is described by the change in an object’s position?
Group of answer choices
force
position
motion
Explanation:
gravity
kinetic energy
less than
friction resists the ball's movement
2.0 m/s
change its direction
speed
newton's first law
dump truck
position
Answer:
Q1 - Gravity
Q2 - Kinetic Energy
Q3 - Less than
Q4 - Friction resists the ball's forward motion
Q5 - 2 m/a
Q6 - Change its speed
Q7 - Speed
Q8 - Second law
Q9 - a dump truck
Q10 - motion
I am not sure about some answers but I answered all questions.
4
Fe
(
III
)
+
3
O
2
→
2
F
e
2
O
3
Answer:
230293
Explanation:
4fe(lll) + 3o2 2o2 2Fe 2O3 + 230293
why does a Costal area have less variation in temperature
Answer:
*The coastal areas experience less variation in temperature as compared to land. ... It means that water takes more time to get hot or cold then land. Therefore areas near sea or ocean have more moderate temperature in the day time and less cooler at night
Explanation:
Determine how many grams of Al(OH)3 will be required to neutralize 216 mL of 0.367 M HCl according to the reaction:
3HCl + Al(OH)3 > AlCl3 + 3H20
mol = conc × v
= 0.367 × 0.216
= 0.0792 mol HCl
3 mol HCl = 1 mol Al(OH)3
0.0792 mol HCl = x
x = 0.0792/3 × 1
= 0.0264 mol Al(OH)3
Al(OH)3 = 27 + 3(16 +1) = 78 g/mol
mass = mol x molar mass
= 0.0264 × 78
= 2.0592 g
I don't know if it's correct
Which statement best describes the effect of radioactive decay on a nucleus?
When radioactive decay occurs, the original nucleus splits into daughter nuclei and the resulting nucleus is more stable than the original nucleus. The nucleus can be of a different element than the original.
Unstable nuclei often undergo radioactive decay. In a radioactive decay, the unstable nucleus is broken up into other nuclei. Usually, the nuclei formed during radioactive decay are smaller in mass compared to the original nucleus.
Also, the resulting nucleus is more stable than the original nucleus. The nucleus can be of a different element than the original.
The effect is that the nucleus changes into the nucleus of one or more other elements. These daughter nuclei have a lower mass and are more stable (lower in energy) than the parent nucleus.
To what pH should you adjust a standard hydrogen electrode to get an electrode potential of -0.128 V ? (Assume that the partial pressure of hydrogen gas remains at 1 atm.) Express your answer using two decimal places.\
The pH of the standard hydrogen electrode that has electrode potential of -0.128 V is 4.3.
The equation of the hydrogen electrode is;
2H^+(aq) + 2e ⇄ H2(g)
The standard electrode potential of hydrogen is 0.00 V
Using the Nernst equation;
Ecell = E°cell - 0.0592/n log Q
Now;
E°cell = 0.00 V
n = 2
Q = 1/[H^+]
-0.128 = 0.00 - 0.0592/2 log 1/[H^+]
-0.128 = 0.00 - 0.0296 log 1/[H^+]
-0.128 = - 0.0296 log 1/[H^+]
-0.128/ - 0.0296 = log 1/[H^+]
1/[H^+] = Antilog (4.32)
[H^+] = 4.79 × 10^-5
Now;
pH = -log[H^+]
pH = -log (4.79 × 10^-5)
pH = 4.3
Learn more: https://brainly.com/question/11155928
Question 1
Which of the following describes the movement of molecules in a solid?
O Molecules are stationary.
O Molecules vibrate in fixed positions.
O Molecules move fast enough to change position.
O Molecules move freely.
Please help ASAP!!!
Answer:
Molecules vibrate in a fixed position.
Explanation:
first one is just wrong.
third is liquid
fourth is gas
Learning Task 2: Read each statement or question below carefully and fill in the blank(s) with the best answer by choosing the words inside the box. Write your answers in a separate sheet of paper. cation 1 -ide -ine nonmetals O ion ionic compound anion metals root name 1. Any atom or molecule with a net charge, either positive or negative, is known as en 2. An atom that gains one extra electron forms an with a 1- charge. 3. A positive ion, called a is produced when one or more electrons are lost from a neutral atom. 4. Unlike a cation, which is named for the parent atom, an anion is named by taking the of the atom and changing the ending. 5. The name of each anions is obtained by adding the suffix to the root of the atom name. 6. The always form positive ions. 7. on the other hand, form negative ions by gaining electrons. 8. It is very important to remember that a chemical compound must have a net charge of
3.00 L of a gas is collected at 35.0 C and 0.93 atm. What is the volume at STP
Help !
Student A uses 3N of force to move a cart 5 meters in 10 seconds. Student B uses 6N of force to move the same cart the same distance in 5 seconds. Which student did more work? Which student used more power? Use evidence and explain your answersss
Work = force x distance
Power = work/time
Work is said to be done if the force applied to a body causes the body to move through a distance.
Student B used more work and power
Workdone = Force * Distance
For student A:
Force = 3N
distance = 5meters
Time taken = 10 secs
Workdone by Student A = 3 * 5
Workdone by student A = 15Nm
Power used up = workdone/time
Power used up = 15/10
Power used up = 1.5 Watts
For student B:
Force = 6N
distance = 5meters
Time taken = 5 secs
Workdone by Student A = 6 * 5
Workdone by student A = 30Nm
Power used up = workdone/time
Power used up = 30/5
Power used up = 6 Watts
This shows that student B used more work and power
Learn more here: https://brainly.com/question/6701368
0 000
which explains why it is important to eat a full healthy meal before an oron o ping po
Food provides the carbon dioxide that is a product of cellular respiration
Food provides the oxygen that is a product of cellular respiration
Food provides the glucose that is a reactant in cellular respiration.
Food provides the energy that is a reactant in cellular respiration.
Answer:
A healthy diet is essential for good health and nutrition. It protects you against many chronic noncommunicable diseases, such as heart disease, diabetes and cancer. Eating a variety of foods and consuming less salt, sugars and saturated and industrially-produced trans-fats, are essential for healthy diet.
Which two types of information are written in an element's box in the periodic table?
I think it is B,D
Answer:
Yes it is B,D.
Explanation:
Each box represents an element and contains its atomic number, symbol, average atomic mass, and (sometimes) name. The elements are arranged in seven horizontal rows, called periods or series, and 18 vertical columns, called groups.
Name the following Type 3 compound
1. PCIE
2. P406
3. SF6
4. SO3
5. SO2
6. N203
7. SiO2
8. O2F2
9. XeF6
Answer:
32
Explanation:
How many federal agencies are responsible for managing land resources in the United States?
2
4
ОООО
6
10
The answer would be 4.
The agencies are:
Department of Agriculture's Forest Service (AFS)
Department of the Interior's Bureau of Land Management (BLM)
Fish and Wildlife Service (FWS)
National Park Service (NPS)
These four agencies cover around 95% of the land and are the only federal agencies.
I learned about these agencies in school.
in a certain reaction, Fe and O2 combine to form iron (iii) oxide. 14.7 moles of Fe and 13.0 moles of O2 are placed in a container and the reaction proceeds iwth 100% yield. which is the excess reactant
Answer:
Fe is the excess reactant
Reaction yields are the amount of the reactant and the products of a chemical reaction. In the reaction between iron and oxygen, iron is the excess agent.
What is excess reactant?The reactant present in an extra quantity than the other reactant in a chemical reaction which reacts with the limiting reactant is called an excess reactant.
In a reaction mixture, the excess reactant is present even when the limiting agent is completely consumed.
The chemical reaction between iron and oxygen is shown as,
[tex]\rm 4 Fe(s) + 3 O_{2}(g) \rightarrow 2 Fe_{2}O_{3}[/tex]
From the reaction, it can be said that oxygen is a limiting reagent that limits the formation of iron (iii) oxide.
Therefore, iron is an excess reactant.
Learn more about excess and limiting reagents here:
https://brainly.com/question/13285193
Silver can be plated out of a solution containing Ag+ according to the half-reaction
Ag+(aq)+e−→Ag(s)
How much time (in minutes) does it take to plate 19 g of silver using a current of 3.4 A ?
Answer:
Approximately [tex]83[/tex] minutes.
Explanation:
Look up the relative atomic mass of [tex]\rm Ag[/tex]: [tex]M({\rm Ag}) = 107.868\; \rm g \cdot mol^{-1}[/tex].[tex]\begin{aligned}Q &= e\, (n(e)) \\ &\approx 1.602 \times 10^{-19}\; \rm C \times 1.06 \times 10^{23} \\ &\approx 1.6987 \times 10^{4}\; \rm C \end{aligned}[/tex]/.
Avogadro's number: [tex]N_A \approx 6.02 \times 10^{23}\; \rm mol^{-1}[/tex].
Elementary charge: [tex]e \approx 1.602 \times 10^{-19}\; \rm C[/tex].
Calculate the quantity of [tex]\rm Ag[/tex] atoms to reduce:
[tex]\begin{aligned}& n({\rm Ag}) \\ &= \frac{m({\rm Ag})}{M({\rm Ag})} \\ &= \frac{19\; \rm g}{107.868\; \rm g \cdot mol^{-1}} \\ & \approx 0.176\; \rm mol\end{aligned}[/tex].
By the equation, it takes one electron to reduce every [tex]\rm Ag[/tex] atom. Thus, the number of electrons required to reduce [tex]0.176\; \rm mol[/tex] of [tex]\rm Ag\![/tex] atoms would be:
[tex]n(e) = n({\rm Ag}) \approx 0.176\; \rm mol[/tex].
[tex]\begin{aligned}N(e) &= n(e) \cdot N_{A}. \\ &\approx 0.176\; \rm mol \times 6.02 \times 10^{23}\; \rm mol^{-1} \\ & \approx 1.06 \times 10^{23}\end{aligned}[/tex].
Calculate the amount of charge (in coulombs) in that many electrons:
[tex]\begin{aligned}Q &= e\, (n(e)) \\ &\approx 1.602 \times 10^{-19}\; \rm C \times 1.06 \times 10^{23} \\ &\approx 16987.1 \; \rm C \end{aligned}[/tex].
A current of [tex]1\; \rm A[/tex] carries a charge of [tex]1\; \rm C[/tex] every second. Thus, the amount of time required for this current to carry that much electron would be:"
[tex]\begin{aligned}t &= \frac{Q}{I} \\ &\approx \frac{16987.1\; \rm C}{3.4\; \rm A} \\ &\approx 83.3\; \rm s \\ &\approx 5.00\times 10^{3}\; \rm s \\ &\approx 83\; \text{minutes} \end{aligned}[/tex].
please i need this now ill give you brainlest
Answer: The following information should be included;
What is the difference between the greenhouse effect, climate change and global warming?
What proof do we have that climate change is happening?
Why is it happening?
How can you include osmosis in animal cell
Sodium hydroxide neutralises hydrochloric acid as shown in the equation:
NaOH(aq) + HCl(aq) i NaCl(aq) + H2O(l)
(4)
dm3
(3)
The student found that 27.20 cm3 of 0.100 moles per dm3 sodium hydroxide neutralised 5.00 cm3 of hydrochloric acid.
Calculate the concentration of the hydrochloric acid in moles per dm3.
Give your answer to three significant figures.
Explanation:
Mole ratio of NaOH : HCl = 1: 1
Moles of NaOH used = 0.1 mol/1000 cm3 × 27.20 cm3
= 2.72 × 10^-3 mol
Therefore moles of HCl used is also 2.72 × 10^-3 mol
So concentration of HCl can be found by dividing the no.of moles of HCl by the volume of HCl as follows
2.72 × 10^-3 mol/ 5cm3
1000cm3 = 1dm3
Therefore,
1cm3 = 1/1000 dm3
5cm3 = 5/1000 dm3
HCl conc. = 2.72 × 10^-3 mol/ 5×10^-3 dm3
= 0.544 moldm-3