Answer: The highest-level numbers are 1 through 7, so the electrons in the atom respond to the row inside the periodic table so where the atoms are supposed to belong.
Explanation:
for the sn2 reaction, draw the major organic product and select the correct (r) or (s) designation around the stereocenter carbon in the organic substrate and organic product. include wedge‑and‑dash bonds and draw hydrogen on a stereocenter.
For stereocenter carbons, the proper abbreviations are (S) for the organic substrate and (P) for the organic product (R).
This is further explained below.
What is a nucleophile?Generally, The reaction's substrate is denoted as S, and its output as R. because of it. The mechanism of the SN2 reaction may be stated succinctly as follows: This nucleophilic substitution procedure only needs one step.
The reaction is known as the SN2 reaction because two reactants are involved in the step that establishes the rate.
In the mechanism of the reaction, the nucleophile attacks the electrophile, leading to a transition phase in which the electrophile's alkyl group departs and the nucleophile forms a new bond with the still-present substrate.
Read more about nucleophile
https://brainly.com/question/28325919
#SPJ1
Pen drop
Gideon is holding a pen in his hand, 1 m off the floor. While he is distracted, it
slips out of his hand and falls to the floor.
1. How long does it take to reach the floor
2. If he dropped a quarter at the same time, how long would it take to hit the floor
It takes 0.44 seconds to reach the floor and it would take the same time to hit the floor If he dropped a quarter at the same time 1 m off the floor which is on motion due to gravity.
What do you mean by the motion done by a gravitational field?When any object moves, it is said to be under motion under gravity since gravity has an impact on the object’s vertical motion. GRAVITY is the force that pulls down things downward and in actuality, gravity pulls objects toward the Earth’s center.
The particle’s initial velocity is 0 during free fall. Consequently, v=gt is said as the equation of motion.
What movements are brought on by gravity?An object launched into the air may also experience a shift in upward velocity due to gravity, which causes it to slow down and return to Earth’s surface.
The Moon is kept in an orbit with the pull of Earth’s gravity. Due to gravity, the Moon continuously changes direction.
1. Time t =?
u = 0
h = ut - [tex]\frac{1}{2}[/tex][tex]gt^2[/tex]
1 = [tex]\frac{10}{2}t^2[/tex]
t = [tex]\sqrt{\frac{1}{5} }[/tex] = 0.44 seconds
2. The quarter will take the same time as ink drop if we neglect the air drag.
To know more about motion under gravity visit:
https://brainly.com/question/13194563
#SPJ9
What mass of oxygen is needed to produce 0.708 moles of propane?
(Step by step explanation, please )
C3H8 + 5O2 → 3CO2 + 4H2O
We can see that for every 1 mol of propane, there are 5 mols are oxygen.
If we have 5 grams of propane, how can we convert that into mols? We need to use the molar mass of propane, which is 44.1 g / mol. (12 g/mol x 3 + 1 g/mol x 8)
To convert to mols of propane: n (mols) = mass/molar mass -> 5/44.1 which equals 0.011 mols.
We said that for every 1 mol of propane, there are 5 mols of oxygen, correct? Therefore, 0.011 mols x 5 = 0.57 mols of oxygen needed to react with 5 grams of propane.
To convert 0.055 mols of oxygen to grams, we use the same equation. n = Mass/Molar Mass
0.57 = g/32, solve for the mass in grams of oxygen and we come to: 18.2 grams of Oxygen.
At a fixed temperature and pressure, the volume occupied by a gas is _____ proportional to the number of moles of gas present. For ideal gases under these conditions, equal _____ of gas contain equal numbers of particles or moles.
Answer:
Directly & Pressure
Explanation:
Oumm...I don't know if it's right but correct me if I'm wrong
25. Which of the following correctly describes
density?
a. Density is a physical change
b. Density is a chemical change
c. Density is a physical property
d. Density is a chemical property
summarize what you learned about acid and bases
Answer:
There are three major classifications of substances known as acids or bases. The Arrhenius definition states that an acid produces H+ in solution and a base produces OH-. This theory was developed by Svante Arrhenius in 1883. Later, two more sophisticated and general theories were proposed. These are the Brønsted-Lowry and the Lewis definitions of acids and bases. The Lewis theory is discussed elsewhere.
The Arrhenius Theory of Acids and Bases
In 1884, the Swedish chemist Svante Arrhenius proposed two specific classifications of compounds; acids and bases. When dissolved in an aqueous solution, certain ions were released into the solution. An Arrhenius acid is a compound that increases the concentration of H+ ions that are present when added to water. These H+ ions form the hydronium ion (H3O+) when they combine with water molecules. This process is represented in a chemical equation by adding H2O to the reactants side.
HCl(aq)→H+(aq)+Cl−(aq)(1)
In this reaction, hydrochloric acid ( HCl ) dissociates completely into hydrogen (H+) and chlorine (Cl-) ions when dissolved in water, thereby releasing H+ ions into solution. Formation of the hydronium ion equation:
HCl(aq)+H2O(l)→H3O+(aq)+Cl−(aq)(2)
The Arrhenius theory, which is the simplest and least general description of acids and bases, includes acids such as HClO4 and HBr and bases such as NaOH or Mg(OH)2 . For example the complete dissociation of HBr gas into water results generates free H3O+ ions.
HBr(g)+H2O(l)→H3O+(aq)+Br−(aq)(3)
This theory successfully describes how acids and bases react with each other to make water and salts. However, it does not explain why some substances that do not contain hydroxide ions, such as F− and NO−2 , can make basic solutions in water. The Brønsted-Lowry definition of acids and bases addresses this problem.
An Arrhenius base is a compound that increases the concentration of OH- ions that are present when added to water. The dissociation is represented by the following equation:
NaOH(aq)→Na+(aq)+OH−(aq)(4)
In this reaction, sodium hydroxide (NaOH) disassociates into sodium (Na+) and hydroxide (OH-) ions when dissolved in water, thereby releasing OH- ions into solution.
pls help with this!!!
molecules are often more than 1 of same element together in nature
like oxygen O is O2 is nature
in this assignment molecules are the number in front of the compound
so 3H20 means 3 molecules of H20 or water
compound are different elements together to make something else
al(oh)2
aluminum hydroxide or antacid
AL 1 O 2 H 2
total 5
molecule 1
Elements 3
3H2O
water
H 6 0 3
total 9
molecules 3
elements 2
NA2CO3
sodium carbonate or soda ash
NA 2 C 1 O 3
total 6
molecules 1
elements 3
one without a name is
FE2O3
iron oxide or rust
FE 2 O 3
total 5
molecules 2
elements 2
Co
C≡O
carbon dioxide
dangerous odorless gas
found in car & engine & generator & kitchen stove exhaust
dangerous because the human body can take it in its blood thinking it to be oxygen
C 1 O 1
total 2
molecules 1
elements 2
a bond between two atoms whose electronegativity values differ anywhere from 0.5 to 2.0 is considered ; whereas a bond between atoms whose electronegativities differ by 2.0 or more is considered . multiple choice question. polar covalent, ionic nonpolar, polar polar covalent, nonpolar
A bond between two atoms whose electronegativity values differ anywhere from 0.5 and 2.0 is called a polar covalent bond, whereas a bond between atoms whose electronegativities differ by 2.0 or more is considered an ionic nonpolar bond.
A covalent bond in which the atoms always have an unequal attraction for electrons which results in the unequal sharing of electron is a polar covalent bond.
If the difference in electronegativity is more than 1.7 or 2.0, ionic nonpolar bonds are formed as the ionic bonds are formed by the electron donation from the atom which is less electronegative to the atom which is more electronegative.
Electrons are shared in ionic and covalent bonds but differently. Non-polar or polar covalent bonds can be formed and they can react to electrostatic charges.
Ionic bonds are formed due to electrostatic force between negative and positively charged ions, thus, electronegativity is more than 2.0.
To learn more about bonds,
brainly.com/question/15207647
#SPJ1
What is the molar mass for fluoxetine
(C16H16F3NO), also known as Prozac®?
1. 281.3 g/mol
2.295.3 g/mol
3. 297.1 g/mol
4.279.3 g/mol
6. Within how many hours are fingerprints still considered "fresh"? *
16 hours
O 48 hours
O24 hours
O 8 hours
Answer:
actually it depends on when and on what you had the finger print it could stay a couple of days, weeks or months and still be considered fresh
equal masses of helium and neon are placed in separate containers of equal vat the same t. compare the number of atoms in each container. select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a there are more atoms of helium than of neon. b there are more atoms of neon than of helium. c there are as many atoms of helium as there are of neon.
Using the molar masses of helium and neon, as well as Avogadro's number, we can see that there are more helium atoms than there are neon atoms.
Let us assume we have 100 g of helium and 100 g of neon. In order to calculate the number of atoms, we need to first calculate the number of moles of each gas. We can do this by using their respective molar masses (4 g/mol for He, and 20 for Ne):
n(He) = m(He) / M(He) = 100 g / 4 g/mol = 25 mol of He
n(Ne) = m(Ne) / M(Ne) = 100 g / 20 g/mol = 5 mol of Ne
Now we can use Avogadro's number (6.022e23/mol) to calculate the number of atoms present in both gas samples:
N(He atoms) = 25 mol * 6.022e23/mol = 150.55e23 He atoms
N(Ne atoms) = 5 mol * 6.022e23/mol = 30.11e23 Ne atoms
Obviously, we have 5 times more He atoms than Ne atoms.
You can learn more about Avogadro's number here:
brainly.com/question/28834341
#SPJ4
Four students were asked to complete a table for a science assignment. Each student selected one chemical element from each of four groups in the periodic table and then classified each element as a metal, a nonmetal, or a metalloid. Which table was completed correctly?
The table that was completed correctly is B.
Columns in the periodic table are called groups or families because of their similar chemical behavior. All members of the element family have the same number of valence electrons and similar chemical properties. The horizontal columns of the periodic table are called periods.
Moving periodically increases nuclear attraction due to increasing atomic number and decreases the atomic size. Therefore, elements cannot readily donate electrons. Therefore, group 17 elements are strong non-metals, and group 1 elements are strong metals. The elements are arranged in 7 horizontal rows called periods or series and 18 vertical columns called groups. Groups are labeled at the top of each column. In the United States, labels have traditionally been uppercase numbers.
Learn more about The periodic table here:-https://brainly.com/question/15987580
#SPJ1
you are extracting water-soluble impurities from your organic-soluble compound. mark where your aqueous (a) and organic (o) layers would be for the following organic solvents:
Soluble water contaminants, such as Calcium chloride, calcium sulphate, calcium bicarbonate, magnesium chloride, magnesium sulphate, magnesium bicarbonate, sodium chloride, sodium sulphate, sodium carbonate, and organic matter.
The more prevalent soluble contaminants are sugar, salt, and milk, are impurities that dissolve in water.
Organic substances typically dissolve easily in solvents with attributes comparable to their own. Like dissolves like, also known as the "like dissolves like" principle, states that non-polar molecules will typically dissolve in non-polar solvents and polar molecules will typically dissolve effectively in polar solvents.
Organic solvents are chemicals with a carbon structure that can dissolve or disperse one or more other compounds.
Organic solvents have the potential to be neurotoxins, genital poisons, and carcinogens.
The organic solvents benzene, carbon tetrachloride, and trichloroethylene are carcinogenic.
To know more about water-soluble impurities, click on the link below:
https://brainly.com/question/15134186
#SPJ9
What is the mass of a substance that has a density of 9.1 g/cm3 and has the dimensions of 2 cm high, 2 cm long and 2 cm wide? (m=D x V)
The mass of the substance would be 72.8g
Given,
The density of the substance = 9.1g/cm³
The Length of the substance = 2cm
The Breadth of the substance = 2cm
The Hight of the substance = 2cm
We know,
Mass = Density × Volume
And
Volume = l×b×h
= 2×2×2
= 8 cm³
Therefore the mass of the substance
= D×V
= (9.1 × 8) g
= 72.8g
So, the mass of a substance will be 72.8g
Learn more about mass and density questions here:-
https://brainly.com/question/22986701
is spraying paint from a spray can diffusion
A device sprays coating material (paint, ink, varnish, etc.) through the air onto a surface when using the spray painting technique. The most popular varieties atomize and guide the paint particles using compressed gas, often air.
How does spray paint work?Volatile Organic Compounds are present in a large number of commonly used professional spray paints (VOCs). VOCs are a group of compounds that are released as gases from a range of solids and liquids, some of which may be harmful to human health in the short- and long-term.
What qualifies as spray paint?When a valve button is depressed, aerosol paint, also known as spray paint, is released from a sealed, pressurized container in an aerosol spray. One type of spray painting is aerosol painting, which leaves a smooth, even coat in contrast to many conventional rolled and brushed paints.
Does paint undergo chemical reactions?Not every change in color results from a chemical shift. If one were to alter a substance's color through a non-chemical interaction, such as painting an automobile, the alteration would be physical rather than chemical.
Is spray paint a gas or a liquid?Spray paints come in aerosol cans and are liquid paints. The top of a can of spray paint has a button that, when depressed, releases paint. Compressed gas is used in aerosol spray cans as a liquid propellant.
Is spray paint distinct from regular paint?A million times faster than brush-on paint is spray paint. Since spray paint is often oil based rather than water based, it is more durable than conventional latex paint or spray paint. Using spray paint outside is simple when you have a drop cloth and some newspaper handy.
To Learn more About Spray paint, Refer:
https://brainly.com/question/23431983
#SPJ13
12. Calculate the molar mass of a compound given that 0.035g of the gaseous compound
occupied 30cm³ at r.t.p.
a) 26.1g/mol
b) 28g/mol
c) 27.6g/mol
d) 56g/mol
Pls an answer I have an exam!!!
If you find I’ll mark you brainliest
imagine a beaker of water into which we place two drops of red food coloring and one drop of blue food coloring. the drops land in different places on the surface of the water. the concentration gradient acting on the red molecules would be
The concentration gradient acting on the red molecules would be stronger than on the blue molecules, but in a different direction.
Stronger than on blue molecules but in different direction because red molecules are having relatively higher density as compared to blue molecules because of 2 drops added. So the concentration gradient will be more and in opposite direction than blue.
Learn more about concentration gradient here:
https://brainly.com/question/19191811
#SPJ4
Give the relative charges of these sub-atomic particles.
Neutrons
protons, electrons
Answer:
neutrons : It has no electric charge and a rest mass equal to 1.67492749804 × 10−27 kg
electrons : It carries a negative charge of 1.602176634 × 10−19 coulomb
protons : positive electrical charge of one (+1) and a mass of 1 atomic mass unit (amu), which is about 1.67×10−27
Answer:
Neutrons are neutrally charged, that is to say they don't have a positive or negative charge and are uncharged.
Protons have a positive charge.
Electrons have a negative charge.
The atom itself as a whole is neutral as the protons and electrons balance each others' charge.
hope it helps
Which of the following methods would you use to prepare 1.00 L of 0.125 M sulfuric
acid?
100.mL
(a) Add 50.0 mL of 3.00 M sulfuric acid to 950. mL of water
(b) Add 20.8 mL of 6.00 M sulfuric acid to 979.2 mL of water
(c) Add 90.2 mL of 1.50 M sulfuric acid to 909.8 mL of water
There are two ways to make 1 liter of 0.125 molars of sulfuric acid. We will perform both calculations to show that only one of the two methods is correct.
Method A and Method B. Dilute the 20.8 mil guide in a 6.00 bowler and add H two s. 4:4 to 1.00 L. Let's see if that's correct. Use milliliters. Sometimes the similarity equals the middle leader sometimes the similarity equals her 20.8 million leaders multiplied by 6.00 Mueller equals 1000 ml times X, the resolution of X.
Get a calculator. 20.8 times 6 divided by 1, 1000 is 1.2 0.124 8 pitchers equals 0.125 moles. It looks pretty good. It seems like that's what we wanted to do. Method B assumes there are 9,500 hoops. 9.50 times 10 2 ml H2O 2 50 ml 3.00 molar sulfuric acid.0.0500 guide x 3.00 wolves per liter equals 0.1 50 moles. Then take 0.150 moles. Divide this by the total volume of 0.950L plus 0.050L. This was the leader .150 bowler which was undesirable. So this is a way to show that only one is correct.
Learn more about Sulfuric acid here:-https://brainly.com/question/4018599
#SPJ1
What is the ion symbol for the ion that has 15 protons and 18 electrons
Answer:ScienceBiochemistryQ&A LibraryAn ion has 15 protons, 16 neutrons, and 18 electrons. The symbol for the ion is 31P3+. 31P3-.
Explanation:
in an experiment, 200 g of aluminum (with a specific heat of 900 j/kgk) at 100 degrees celsius is mixed with 50.0 g of water at 20.0 degrees celsius, with the mixture thermally isolated. (a) what is the equilibrium temperature? what are the entropy changes of (b) the aluminum, (c) the water, and (d) the aluminum –water system?
(a) Water has a specific heat of 4190J/kgK while aluminum has a specific heat of 900J/kgK.
Therefore,
[tex]T_{f}[/tex]= (0.200kg)(900J/kg⋅K)+(0.0500kg)(4190J/kg⋅K) / (0.200kg)(900J/kg⋅K)(100°C)+(0.0500kg)(4190J/kg⋅K)(20°C)
= 57°C = 330K
(b) The following temperatures must now be stated in Kelvins: [tex]T_{ai}[/tex] = 393, [tex]T_{wi}[/tex] = 293
[tex]T_{f}[/tex] =330K dQ=[tex]m_{a}[/tex][tex]c_{a}[/tex] dT for aluminum, and the entropy change is
= Δ[tex]S_{a}[/tex] = ∫[tex]\frac{dQ}{T}[/tex] = [tex]m_{a}[/tex][tex]c_{a}[/tex] ∫(from [tex]T_{f}[/tex] to tai) [tex]\frac{dT}{T}[/tex] = [tex]m_{a}[/tex][tex]c_{a}[/tex] ln [tex]T_{f}[/tex]/ Tai
= (0.200kg)(900J/kg.K) ln (330K/373K)
= -22.1 J/K
(c) For water, the entropy change is
Δ[tex]S_{w}[/tex] = ∫[tex]\frac{dQ}{T}[/tex] = [tex]m_{w}[/tex][tex]c_{w}[/tex] ∫(from [tex]T_{f}[/tex] to tw1)[tex]\frac{dT}{T}[/tex] = [tex]m_{w}[/tex][tex]c_{w}[/tex] ln [tex]T_{f}[/tex]/ Twi
= (0.0500kg)(4190J/kg.K) ln(330K/373K)
= + 24.9J/K
(d) The change in the aluminum-water system's overall entropy is
ΔS=ΔSa+ΔSw =−22.1J/K+24.9J/K = +2.8J/K
To learn more about aluminium-water system visit:
https://brainly.com/question/9263700
#SPJ9
Lab Report Guide
2. What procedure did you use to complete the lab?
Outline the steps of the procedure in full sentences.
Answer:
To be lab-prepared one must follow these procedures-
1. One should have knowledge of lab assignments to make the lab experiment easier.
2. To be aware of safety equipment and its uses in the lab, like- the location of a fire extinguisher in the lab.
3. To know the steps of experiments to be performed
4. To fill the notebook of the lab with information regarding the experiment
5. One should review the data sheets of chemical material safety.
6. put on all the necessary dressings to perform the experiment.
7. To have a complete understanding of the experiment disposals.
PLEASeee helppp in class rn. Pleaseee with 2,3, and 4.
There are 115 protons in the element 115 and due to the large number of protons, the element does not exist in nature.
Also, the element can not be isolated in nature that is IUPAC had to require an independent confirmation of the element.
What is element 115?We know that the periodic table is an arrangement of the atoms in order of increasing atomic number. We know that the larger the atomic number of the element, the less likely that the element would be stable in nature. The element that have been named 115 is called Moscovium and was discovered in Moscow as a product of a radioactive experiment. The number of protons in element 115 is 115 protons
Generally, the element number 115 does not exist in nature because if the proton number in an element exceeds 82, the repulsion between the protons would make it almost impossible for the nucleus to be a stable nucleus.
The reason why IUPAC had to request an independent confirmation of the element is because it does not exist in nature.
Learn more about element 115:https://brainly.com/question/27914234
#SPJ1
One difference between a reflux setup and a simple distillation setup is the presence of a __________ positioned between the reaction pot and the condenser.
One difference between a reflux setup and a simple distillation setup is the presence of a T-shaped three-way adapter positioned between the reaction pot and the condenser.
In the reflux setup, the condenser is mounted directly on the reaction flask.
The purpose of the reflux setup is to maintain the solvent in the reaction flask at boiling point while maintaining a constant volume of it. It is assumed that the boiling point of the solvent is known, so no thermometer is necessary.
On the other hand, the purpose of the distillation setup is to separate the liquid components of the mixture based on the difference in their boiling points. Because of this, we need to be able to gauge the temperature of the vapors entering the condenser, making the thermometer (and the T-shaped three-way adapter) necessary.
You can learn more about distillations here:
brainly.com/question/13345735
#SPJ4
A) Since, "like dissolves like" the anion of KCl will be attracted to the anion of the water and allow the KCl to dissolve and go into solution.
B) KCl is surrounded by the nonpolar H2O to form an electrolyte solution which can conduct electricity.
C) KCl is surrounded by the polar H2O to form an electrolyte solution which can conduct electricity.
D) Water attracts the ions to allow the potassium cation to be separated from the chloride anion and go into solution.
As shown in the solvation of KCl in water, water attracts the ions to allow the potassium cation to be separated from the chloride anion and go into solution; option D.
What is solvation?Solvation is the process by which solvent molecules in which a solute is dissolved interact with the molecules of the solute.
Solvation is also known as dissolution.
The principle of dissolution of substances states that like dissolves like.
This implies that polar or ionic substances will dissolve easily in polar solvents whereas non-polar solutes will dissolve in non-polar solvents.
Therefore, when an ionic compound such as KCl is dissolved in a polar solvent such as water, the solvent molecules will interact with the ions of K and Cl produced when the solute dissolves.
Learn more about solvation at: https://brainly.com/question/530845
#SPJ1
4Na(s) + TiCl4(1)→ Ti(s) + 4NaCl(s)
Calculate the mass of titanium that can be extracted from 570 kg of titanium chloride.
Relative atomic masses: Cl 35.5; Ti 48.
Convert your answer into grams.
The mass of titanium that can be extracted from 570 kg of titanium chloride is 144302.4 g.
Titanium chloride weighs 570 kg, or = 570000 / 189.6 moles. As 189.6 g make up 1 mole of titanium chloride, that equals 3006.3 moles.
Now, we can see from the equation that 1 mole of titanium chloride results in 1 mole of titanium.
Consequently, 3006.3 moles of titanium chloride are converted into 3006.3 moles of titanium.
Considering the atomic weights of Cl 35.5 and Ti 48
So, 48 x 3006.3 g times 3 moles of titanium equals 144302.4 g.
To learn more about atomic masses click on the link below:
https://brainly.com/question/338808
#SPJ9
where protons are located in this carbon atom.
Answer:
In every atom, protons are located in the nucleus
Explanation:
You clicked the orbit of an electron in the photo. The electrons orbit the nucleus in the orbital empty space. Protons and neutrons compose the nucleus of every atom.
hope this helps :)
please crown me brainliest!!!
Two samples contain carbon and
hydrogen in the amounts shown in
the data table.
What is the mass percent of
hydrogen in compound 1?
Carbon (g) Hydrogen (g)
Compound 1
Compound 2
15.0
22.5
% Hydrogen
5.0
7.5
Total Mass of
Sample (g)
20.00
30.00
Answer: 25%
Explanation: To find the mass percentage of a chemical you need to do mass/total mass x 100 = %.
In this case you would do 5.0/20.00 because 5.0 is the mass of the hydrogen and 20.00 is the total mass. That equals .25 so the next step is to times that by 100.
.25 x 100 = 25, so we know that the percent of the hydrogen mass in compound 1 = 25%
Does anyone know compound 2?? I’m stuck I don’t know how to do this
Question 1 (1 point)
The electron configurations of two unknown atoms are shown.
Electron Configuration
Based on the electron configuration of each atom, what is the number of valence electrons for each atom?
a Atom X = 1; Atom Y = 1
b Atom X = 1; Atom Y = 7
c Atom X = 10; Atom Y = 10
d Atom X = 11; Atom Y = 17
Answer:
b Atom X = 1; Atom Y = 7
Explanation:
a valence electron is an electron in the outer shell
So X has 1 in outer shell
Y has 7 in outer shell
How many moles of nitrogen atoms are there in 8.92 mol Ba(NO3)2?
Express your answer to three significant figures.
The number of moles of a nitrogen atom in 8.92 mol of Ba(NO₃)₂ is 17.8 moles of the Nitrogen atom.
The mole, image mol, is the unit of quantity of substance in the worldwide gadget of gadgets. the amount quantity of the substance is a measure of what number of primary entities of a given substance in an object or sample. The mole is described as containing precisely 6.02214076×10²³ essential entities.
The wide variety of basic entities in one mole is referred to as the Avogadro quantity. This definition supersedes the previous definition of a mole as the variety of elementary entities identical to that of 12 grams of carbon-12, the maximum commonplace isotope of carbon.
1 mole = 6.022×10²³ molecules
8.92 mol Ba(NO3)2 = 8.92 × 6.022×10²³ molecules
= 53.72 ×10²³
= 5.372 ×10²⁴ molecule
1 molecule of Ba(NO₃)₂ contain
1 atom of Ba
2 atoms of N
8 atoms of O
5.372 ×10²⁴ molecule = 2 × 5.372 ×10²⁴ atom of nitrogen
= 1.07 ×10²⁵ atom of Nitrogen. ( three significant figures)
moles of nitrogen atom = 1.07 ×10²⁵ atom of Nitrogen /6.022×10²³
= 17.8 moles of the Nitrogen atom.
Learn more about moles here:-https://brainly.com/question/15356425
#SPJ1