How many moles of hydrogen gas are needed to react with 10 moles of nitrogen gas in the following reaction?

Extra Content
N2(g) + 3H2(g). → 2NH3(g)
1 mole of nitrogen gas reacts with 3 moles of hydrogen gas to produce 2 moles of ammonia gas


A.
10 moles
B.
20 moles
C.
30 moles
D.
6 moles

Answer:

Option C, an elongated ridge designed by engineers that runs parallel to a stream channel

Explanation:

A natural or artificial levee is basically a ridge constructed along a river bank to regulate the water level in the stream.

It run along the river embankment and hence can be said that it runs parallel to the river length

Hence, option C is correct

Answer:

1.385 x 1025 molecules are there in 23 mole of oxygen

Answer:

Answer:

mass = 102.69 g of sucrose

Explanation:

First, you need to use the correct expression of molality (m) which is the following:

m = moles / kg solvent    (1)

According to the exercise, we need to get the grams, in other words, the mass of the sucrose. To get the mass, we need the moles and molecular weight of sucrose and use the following expression:

moles = mass / MM    (2)

Now, if we replace (2) in (1) we have:

m = mass / MM * kg solvent   (3)

From here, we solve for the mass and then:

mass = m * MM * kg solvent (4)

Now, then density of water is 1 kg/L, so, the volume of the water will be the same as it's mass, and the molality is 3 m. The molecular weight of the sucrose is (according to several sources) 342.3 g/mol. Replacing all the data in (4) we have:

mass = 3 mol/kg * 0.1 kg * 342.3 g/mol

Hope this helps

Answer:

There are now two oxygen atoms on the left and four on the right (in one N2O and three H2O's), so we balance the oxygen atoms by placing a 2 in front of the O2.

The numbers before atoms are the coefficients, and they are used to balance chemical reacions. In the provided example, number in front of O₂ is 3.

Note: Since I do not have the proposed reaction, I provided a random example.

A balanced chemical reaction is an equation in which the number and type of atoms are the same on both sides of the arrows.

Following the law of mass conservation, chemical equations should be balanced to ensure that all the reactants appear in the products.

This means that no new atoms appear, and no atoms disappear. The only thing that changes in a chemical reaction is the bond between atoms.

So each side of the equation must be equilibrated concerning the amount and type of atoms.

Coefficients are used to balance reactions. These numbers are located before each atom and indicate the number of units present in the formula.

I do not have the proposed reaction, but I will provide an example using O₂.

Reactants ⇒ 4 Al and 3 O₂

                     3 O₂ = 6 O

Products ⇒ 2 Al₂O₃

                    2 Al₂ = 4 Al

                    2 O₃ = 6 O

On each side of the equation we have 4 Al and 6 O. The only thing that changes are the bonds between atoms.

In this case, the coefficient of O₂ is 3.

You can learn more about balanced chemical reactions at

https://brainly.com/question/26196894

https://brainly.com/question/15178192

#SPJ2

Answer:

here :). hope this helps.

Answer:

30.34 atm

Explanation:

Using the general gas law formula;

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

T = temperature (K)

R = gas law constant (0.0821 Latm/molK)

According to the information provided in this question,

n = 3mol

T = 35°C = 35 + 273 = 308K

V = 2.5L

P = ?

Using PV = nRT

P = nRT/V

P = 3 × 0.0821 × 308/2.5

P = 75.8604 ÷ 2.5

P = 30.34 atm.

Explanation:

can you tell us what do want help with?

Answer:

Ok I will give you answer

Answer:

segmented bodies, jointed appendages, & exoskeleton

Explanation:

Hope you succeed, have a nice day!

Explanation:

It explodes when a spark is present.. letter D

Answer:

A. It is flammable.

Explanation:

physical property is a characteristic of matter that is not associated with a change in its chemical composition. Familiar examples of physical properties include density, color, hardness, melting and boiling points, and electrical conductivity.

Answer:

2.3 L

Explanation:

A change in pressure-volume at constant temperature is described by the Boyle's law. The mathematical relationship between initial pressure and volume (P₁ and V₁) and final pressure and volume (P₂ and V₂) is given by:

P₁V₁ = P₂V₂

We have the following data:

initial pressure: P₁= 2.5 atm

initial volume: V₁ = 9.1 L

final pressure: P₂= 9.8 atm

Thus, we introduce the data in the mathematical expression and calculate the final volume V₂, as follows:

V₂ = P₁V₁/P₂ = (2.5 atm x 9.1 L)/9.8 atm = 2.3 L

Therefore, the volume of the canister is 2.3 L.

Answer:

V ≈ 16,662.63 L

Explanation:

The data given in the question includes;

The pressure in the medium, P = 1.23 mmHg

The number of moles of the substance present in the medium, n = 0.773 mol

The temperature of the substance in the medium, T = 152 °C = 425.15 K

The unknown quantity, V = The volume filled by the substance

The ideal gas law equation that can be used to find the unknown volume is given here as follows;

P × V = n × R × T

Where;

R = The Universal Gas Constant = 62.363 mmHg·L·mol⁻¹·K⁻¹

From the ideal gas law equation, we get;

V = n × R × T/P

Plugging in the values, gives;

V = 0.773 mol × 62.363 mmHg·L·mol⁻¹·K⁻¹ × 425.15 K/(1.23 mmHg) = 16,662.6305405 L

The volume occupied, which is the unknown quantity, V ≈ 16,662.63 L.

Answer:

colorless liquid with a strong smell and a white solid with no smell. The substances’ repeating groups of atoms are shown above on the left. After they were mixed, the chemist analyzed the results and found two substances. One ending substance had the repeating group of atoms shown above on the right.

Explanation:

Answer:

691.7 mmHg is the resulting pressure

Explanation:

Tha Gay-Lussac's law states that the pressure of a gas is directly proportional to its absolute temperature under constant volume. The equation is:

P1T2 = P2T1

Where P is pressure and T asbolute temperature of 1, initial state and 2, final state of the gas.

Computing the values of the problem:

T1 = 273 + 25 = 298K

P1 = 755.0mmHg

T2 = 273 + 0 = 273K

P2 = ?

755.0mmHg*273K = P2*298K

Answer:

microwaves

Explanation:

Microwaves and radio waves are the longest wavelengths while the shortest are gamma rays and x-rays

Answer:

[tex]v_{solute}=25mL[/tex]

Explanation:

Hello there!

In this case, according to the by-volume concentration of this solution, it is possible for us to use its mathematical definition as shown below:

[tex]\%v=\frac{v_{solute}}{v_{solution}}*100\%[/tex]

Thus, given the percent and the volume of the solution, we can solve for the volume of ethanol (solute) as shown below:

[tex]v_{solute}=\frac{\%v*v_{solution}}{100\% }\\\\v_{solute}=\frac{5.00\%*500mL}{100\%}\\\\ v_{solute}=25mL[/tex]

Best regards!

Answer:

–253.5 °C

Explanation:

We'll begin by calculating the number of mole in 6 g of CO₂. This can be obtained as follow:

Molar mass of CO₂ = 12 + (2×16)

= 12 + 32

= 44 g/mol

Mass of CO₂ = 6 g

Mole of CO₂ =.?

Mole = mass / molar mass

Mole of CO₂ = 6 / 44

Mole of CO₂ = 0.136 mole

Next, we shall convert 225 mL to L.

1000 mL = 1 L

Therefore,

225 mL = 225 mL × 1 L / 1000

225 mL = 0.225 L

Next, we shall determine the temperature of the gas. This can be obtained as follow:

Pressure (P) = 0.855 atm

Volume (V) = 0.225 L

Number of mole (n) = 0.136 mole

Gas constant (R) = 0.0821 atm.L/Kmol

Temperature (T) =?

PV =nRT

0.855 × 0.255 = 0.136 × 0.0821 × T

0.218025 = 0.0111656 × T

Divide both side by 0.0111656

T = 0.218025 / 0.0111656

T = 19.5 K

Finally, we shall convert 19.5 K to degree celsius (°C). This can be obtained as follow:

T(°C) = T(K) – 273

T(K) = 19.5 K

T(°C) = 19.5 – 273

T(°C) = –253.5 °C

Therefore, the temperature of the gas is –253.5 °C

Answer:

Explanation:

It comes in different colors, it expands when it's "full". It floats away if it is not tied down and will make a loud noise if it pops (breaks).

Explanation:

What's Your Question ??..

Explanation:

nso3=75/80 (80=Mr of so3)

n of o= 75x3/80

x of o= 75x3/80x6.02x10 powered by 23

then, the anwer is

[tex] {10}^{23} \times 16.93125[/tex]

sry if im wrong

There are approximately 1.204 x 10²⁴ oxygen atoms in 75 g of SO₃.

To calculate the number of oxygen atoms in 75 g of SO₃, we need to consider the molar mass of SO₃ and Avogadro's number.

The molar mass of SO₃ is calculated as follows:

Sulfur (S) = 32.07 g/mol

Oxygen (O) = 3 x 16.00 g/mol = 48.00 g/mol

Total molar mass of SO₍ = 32.07 g/mol + 48.00 g/mol = 80.07 g/mol

Next, we need to determine the number of moles of SO₃ in 75 g:

moles = mass / molar mass = 75 g / 80.07 g/mol ≈ 0.9369 mol

Since each molecule of SO₃ contains 3 oxygen atoms, we can calculate the number of oxygen atoms by multiplying the number of moles of SO₃ by Avogadro's number (6.022 x 10²³ atoms/mol) and then multiplying by 3:

Number of oxygen atoms = 0.9369 mol x 6.022 x 10²³ atoms/mol x 3 = 1.604 x 10²⁴ atoms

Therefore, there are approximately 1.204 x 10²⁴ oxygen atoms in 75 g of SO₃.

To learn more about atoms, here

https://brainly.com/question/1566330

#SPJ2

. Its nucleus is unstable.

Its nucleus is unstable. This characterizes a radioactive atom. Therefore, the correct option is option A.

The smallest parts of common stuff that can be separated without releasing electrically charged particles are called atoms. The atoms are divided into two sections. an electron cloud and an atomic nucleus. Atoms with an unstable nucleus and the potential for radioactive decay are referred to as radioactive atoms.

As only nuclei often experience decay and changes with electron configuration only come from nucleus configuration changes, the term "radioactive atom" is misleading. This isn't a rule, it must be said. As a parent nucleus needs capture any of its orbital electrons, the electron cloud also plays a significant role in the case of electron capture. Its nucleus is unstable. This characterizes a radioactive atom.

Therefore, the correct option is option A.

To know more about radioactive atom, here:

https://brainly.com/question/13673451

#SPJ7

Answer:

4 liters I think actually hold on

Answer:

( dichlorine monoxide ) is Polar Explanation:Answer. Answer = CF2Cl2 (Dichlorodifluoromethane) is Polar What is polar and non-polar? Cl2O ( dichlorine monoxide ) is Polar I'll tell you the polar or nonpolar list below.

Answer:

vp jokhimon vf dpp gl fl vk hggjuvg7vvohohohohojj

Answer:

3) Vapor pressure in atm = 0.13 atm

Explanation:

Answer:

The right answer is "0.17 M".

Explanation:

The given values are:

Volume,

V₁ = 250 mL

V₂ = 750 mL

Molarity,

M₁ = 0.50 M

M₂ = ?

As we know,

⇒  [tex]M_1 V_1=M_2 V_2[/tex]

or,

⇒  [tex]M_2=\frac{M_1 V_1}{V_2}[/tex]

On substituting the values, we get

⇒        [tex]=\frac{0.50\times 250}{750}[/tex]

⇒        [tex]=\frac{125}{750}[/tex]

⇒        [tex]=0.17 \ M[/tex]