Mark and Amanda conduct the same investigation as Nguyen, but they use four rocks. They test the same three rocks as Nguyen but add one more rock that has the same color and density as limestone. However, the rock doesn't produce bubbles when acid is added to it. Explain how the mineral composition of this rock compares with that of limestone?

The statement information about earth and the sun direction of earth's rotation axis best explains the pattern of daytime and night-time on earth is " earth must complete one rotation on its axis every 24 hours".

The sun was composed of incredibly hot gases, as well as then it heats as well as illuminates the entire solar system.

The earth was referred to as a "one-of-a-kind" planet since that is the only one on the planet with ideal circumstances for life.

Day though night are caused by the Earth's diurnal revolution. From west to east, the earth rotates on its axis for around 24 hours. As a result, the sun appears to rotate from east to west, resulting in sunset and sunrise. except for polar is, which remains stationary in the north polar sky along the earth's axis, all those other stars move from east to west.

Therefore, the correct answer will be C.

To know more about earth and sun.

https://brainly.com/question/2526507

#SPJ2

Answer:

THE ANSWER IS (C.)

Explanation:

Answer:

4.43 g

Explanation:

The reaction between sodium chloride and flourine gas is given as;

NaCl + F2 --> NaF + Cl2

From the stochiometry of the equation;

1 mol of NaCl reacts eith 1 mol of F2 to form 1 mol of NaF and Cl2

Mass of 1 mol of F2 = 38g

Mass of 1 mol of sodium flouride, NaF = 42g

This means 38g of flourine reacted with NaCl to form 42g of NaF

xg of F2 would form 4.9g of NaF

38 = 42

x = 4.9

x = 4.9 * 38 / 42

x = 4.43 g

Answer:

Number of moles of KIO₃ =  4.0×10⁻⁵ mol

Explanation:

Given data:

Concentration of solution = 0.04 M

Volume of solution = 1 mL

Number of moles of KIO₃ = ?

Solution:

Molarity = concentration

Molarity = number of moles / volume in L

We will convert the volume into L.

1 mL×1 L /1000 mL

0.001 L

Now we will put the values in formula,

0.04 M = number of moles / 0.001 L

Number of moles = 0.04 M ×0.001 L

Number of moles = 4.0×10⁻⁵ mol

Answer:

I am pretty sure its called a sand dune

Explanation:

Answer:

Its c hope this helps ;)

Explanation:

Answer:

Answer is D

Explanation:

Am smort

Answer:

False

Explanation:

Ok then what im bored

Answer:

  B)  2.87 L

Explanation:

A mole of any gas at STP has a volume of about 22.412 liters. So, 0.128 moles of gas will have a volume of ...

  0.128 · 22.412 L ≈ 2.87 L

Answer:

Explanation:

Answer:

D.) This atom has an atomic number of 50

Explanation:

A is wrong because we determine the type of atom by their number of protons, not the number of neutrons. This makes the atom Tin (Sn).

B is wrong because both protons and neutrons contribute to the weight of an atom, not just neutrons

C is wrong because the correct name for this isotope would be tin-119, which is calculated by adding the protons and neutrons

D is correct because isotopes of the same element always share the same atomic number

Answer:

V = 5.74 L

Explanation:

Given data:

Volume of carbon dioxide produced = ?

Temperature and pressure = standard

Mass of calcium carbonate = 25.6 g

Solution:

Chemical equation:

CaCO₃      →        CaO + CO₂

Number of moles of calcium carbonate:

Number of moles = mass / molar mass

Molar mass of calcium carbonate = 100 g/mol

Number of moles = 25.6 g/ 100 g/mol

Number of moles = 0.256 mol

Now we will compare the mole of calcium carbonate with carbon dioxide.

                       CaCO₃           :            CO₂

                            1                :             1

                         0.256          :         0.256

Volume of  CO₂:

PV = nRT

R = general gas constant = 0.0821 atm/L / mol.K

By putting values,

1 atm× V = 0.256 mol × 0.0821 atm/L / mol.K× 273.15 K

V = 5.74 atm/L / 1 atm

V = 5.74 L

Answer:

Oxygen receives two electrons from magnesium.

Explanation:

Hello!

In this case, considering the chemical reaction by which magnesium oxide is produced:

[tex]2Mg+O_2\rightarrow 2MgO[/tex]

In that case, if we show up the oxidation states, we have:

[tex]2Mg^0+O_2\rightarrow 2Mg^{2+}O^{2-}[/tex]

In such a way, since metals, like magnesium, have the capacity to lose electrons, rather than receive them, we infer why it turns out with +2 rather than -2; thus, we the correct answer is "oxygen receives two electrons from magnesium." because it results with -2 in MgO.

Best regards!

Answer:

Oxygen receives two electrons from magnesium.

Explanation:

Answer:

6

Explanation:

ye

Answer:

It's big brain time

Explanation:

Weathering is the process of breaking rocks into sediment while erosion is the process that wears away this sediment and other materials and moves them from one location to another.  Agents of erosion include gravity, glaciers, wind, and water.  Erosion only occurs when these agents have enough energy.  The moment agents of erosion lose their energy and momentum they deposit their load.  This process is known as deposition.  The load is what the agent is carrying.  As agents of weathering lose their energy, the heavier sediment is dropped.  As the energy is lost, gravel, then sand, then silt, and then clay are deposited, due to their respective masses.

Mass movement, sometimes referred to as mass wasting, is what we call the movement of surface material due to gravity, water, wind, and ice.  There are five main types of mass movements: falls, creep, flows, slides, and slump.

Answer: Conduction, radiation and convection all play a role in moving heat between Earth's surface and the atmosphere. Since air is a poor conductor, most energy transfer by conduction occurs right near Earth's surface. ... During the day, sunlight heats the ground, which in turn heats the air directly above it via conduction.

HOPE THIS HELPS

Answer:

0.33 moles

Explanation:

to find the number of moles,

moles = number of atoms / avogadro's number ie 6.02 x [tex]10^{23}[/tex]

moles = 2.0 x [tex]10^{23}[/tex] / 6.02 x [tex]10^{23}[/tex]

moles = 0.33 mol

Answer:

Mass = 114.5 g

Explanation:

Given data:

Mass of zinc = 55 g

Mass of ZnCl₂ produced = ?

Solution:

Chemical equation:

Zn + 2HCl     →      ZnCl₂ + H₂

Number of moles of Zn:

Number of moles = mass/molar mass

Molar mass of Zn = 65.4 g/mol

Number of moles = 55 g/  65.4 g/mol

Number of moles = 0.84 mol

Now we will compare the moles of Zn and zinc chloride,

               Zn           :          ZnCl₂

                1             :           1

              0.84        :          0.84

Mass of ZnCl₂:

Mass = number of moles × molar mass

Molar mass of ZnCl₂= 136.3 g/mol

Mass =  0.84 mol × 136.3 g/mol

Mass = 114.5 g

Answer:

True

Explanation:

Hope this helps you complete the quiz :)

Answer:

Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.

Explanation:

Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.

Answer:

42 km/h

Explanation:

Answer:

C.

Explanation:

Answer:

21.25

Explanation:

Answer:

I think the answer is 3. Highest energy level first, so it fills in the inside rings first

Electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons contain been placed.

Most of the time, electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons have been positioned.

The lowest energy level is always added to initially until it has as many electrons as it can have. The following higher energy level is then filled with electrons, and so on.

The lowest energy level is always filled up with additional electrons first, up to the point where that level can hold no more, and then further electrons are added to the next higher energy level, and so on. A level's total number of orbitals determines how many electrons can be present at that energy.

Therefore, the correct answer is option 3. Highest energy level first, so it fills in the inside rings first.

To learn more about Electrons refer to:

https://brainly.com/question/860094

#SPJ2

The average atomic mass of Ca : 43.943 amu

Given

Isotopes of Ca

Required

The average atomic mass

Solution

Isotopes are elements that have the same Atomic Number (Proton)

Atomic mass is the average atomic mass of all its isotopes

Avg atomic mass = m1.%m1 + m2.%m2....mn.%mn

m1 = isotope 1

m2 = isotope 2

% = abundance of the elements in nature

Input the value :

avg atomic mass = 39.96 x 0.96941 + 41.96 x 0.0647+42.96 x 0.0135 + 43.96 x 0.02086 + 47.95 x 0.0187

avg atomic mass =43.943 amu

Answer:

E

Explanation:

Look at bottom numbers.

90 → 88 + x

it means,

90=88+x

hence x = 2

it is also valid for top numbers.

230=226+y

y = 4

1

Explanation:

because they period two

Answer:

1

Explanation:

Answer:

Explanation:

I'm not sure, don't hate me if i'm wrong but i think the third one is the answer.

Answer:

The question is asking what does not have anything to do with the bond formation.

Answer:

1. Na2SO4 + Ba(NO3)2 → NaNO3 + BaSO4

2. NaNO3 + NH4Cl → NaCl + NH4NO3

4. Sorry, I don't know

5. Refer to the attachment..

6. NaC2H3O2(aq) + AgNO3(aq) = NaNO3(aq) + AgC2H3O2

[tex] \huge{\blue{Thank \: you}}[/tex]

Answer:

I think carbon and hydrogen

Answer:

Its carbon and hydrogyen

Explanation:

got it right on edge

Answer:

C. It received genes that are exactly the same as the parent's genes

In asexual reproduction in hydra,offspring has no genetic variation from the parent because it received genes that are exactly the same as the parent's genes.

Asexual reproduction is a type of reproduction where the offsprings are  not produced by the combination of genetic material of two individuals which are of different sexes rather they are produced by a single parent.

It is the  not the dominant form of reproduction in living beings.Here, the offsprings are identical to their parents as there is no recombination of genetic material.It is observed in both unicellular or multicellular organisms.

There is no fertilization or gamete formation taking place.Types of asexual reproduction include budding, binary fission,fragmentation,etc.

Learn more about asexual reproduction,here:

https://brainly.com/question/4100787

#SPJ2

Answer:

B.9

Explanation: