mention part of generetor and write the uses of each part​

Answers

Answer 1

Answer:

Explanation:

If generator really means alternator as used in cars, the following can be said:

The rotor is fed with a variable voltage ranging from 0 volt to 12 volts. The 2 brushes (fixed, not rotating, like the stator) make contact with two rings that are rotating with the rotor. The rotor acts like a fixed magnet, but the magnetic field strength is constantly updated to provide a constant output voltage, even if the load current change or the motor speed change.

The stator is basically 3 coils and 6 diodes that convert the 3 phases of AC output to an almost ripple-free DC.

Note that as more energy is extracted from the alternator (for example, adding 10 amps by turning on the headlights) the shaft resists more rotation. This can be easily tested by holding an alternator in your hand, and trying to rotate the shaft by hand with no load (rotate easily, keep rotating for a few seconds), then short-circuiting the output (much harder to rotate, stop rotating immediately). The quest for magical perpetual energy where a motor is powered by an alternator is a child's dream.


Related Questions

What is the most likely outcome? it will become a permanent magnet because the domains will remain aligned. it will become a temporary magnet because the domains will remain aligned. it will become a permanent magnet because the domains will easily realign. it will become a temporary magnet because the domains will easily realign.

Answers

The likely outcome when a magnetically soft material is placed in a strong magnetic field is that it will become a temporary magnet because the domains will easily realign.

What is a magnet?

A magnet is a material whose magnetic domains are properly aligned. These materials are able to attract other materials that are magnetizable.

Hence, the likely outcome when a magnetically soft material is placed in a strong magnetic field is that it will become a temporary magnet because the domains will easily realign.

Missing parts:

A magnetically soft material is placed in a strong magnetic field. What is the most likely outcome?

a. It will become a permanent magnet because the domains will remain aligned.

b. It will become a temporary magnet because the domains will remain aligned.

c. It will become a permanent magnet because the domains will easily realign.

d. It will become a temporary magnet because the domains will easily realign.

Learn more about magnets:https://brainly.com/question/14301573

#SPJ1

Answer: D or It will become a temporary magnet because the domains will easily realign.

Explanation: Taking the quiz!

A brick is kept in 2 different ways on a table as shown
below. which brick exerts more pressure? Why?

Answers

Answer:

A

Explanation:

when  area increases pressure decrease

for example, a sharp nail's area is lower than a blunt nail, so sharp nail is easy to fix

so, here a exerts more pressure

Answer:

a

Explanation:

If you had to choose a theory that best represents your own view of development, would you choose a single theory or would you select components of several different theories? what aspect of your chosen theory (or theories) make it more attractive than others

Answers

I would select components of several different theories and the aspect which will be more attractive will be the one which has similarities and accurate.

What is a Theory?

This is defined as a proposed explanation for a particular phenomenon or occurrence.

Components of several different theories will bring different dimensions and factors to the occurrence which will help in its thorough analysis.

Read more about Theory here https://brainly.com/question/11555274

#SPJ1

Which statement belongs to daltons atomic theory

Answers

Atoms cannot be broken down into smaller pieces is the statement belongs to daltons atomic theory. Option B is correct.

What is an atom?

The atom consists of matter that may be split without releasing electrical charges. It's also the smallest unit of matter with chemical element features.

The complete question is:

"Which statements belong to Dalton's atomic theory? Select all that apply.

A)Atoms cannot be created or destroyed.

B)Atoms cannot be broken down into smaller pieces.

C)All atoms of an element are identical.

D)Chemical reactions cause atoms to be rearranged."

According to Dalton's atomic hypothesis, atoms cannot be broken down into smaller bits.

Hence, option B is correct.

To learn more about the atom refer to the link;

https://brainly.com/question/1566330

#SPJ1

HELP!
how did Mario Molina contribute to science?

i need like a mini paragraph:(

Answers

Mario Molina helped to bring about the 1987 Montreal Protocol on substances that result in depletion of the Ozone Layer.

What is ozone layer?

The topmost layer of the atmosphere which protect the harmful UV rays from the Sun to reach the Earth surface.

Mario Molina has the great contribution in science field. He tried hard and succeeded in passing an international agreement to eliminate CFCs also called as Chloro Fluoro Carbons and other ozone-depleting chemicals.

These CFCs were used in jet planes which depleted the ozone layer and a hole was observed over Antarctica.

Learn more about ozone layer.

https://brainly.com/question/14330630

#SPJ1

You suspect that the power supply in your desktop pc is failing. you want to use a multimeter to test the power supply. which multimeter setting should you use

Answers

The multimeter setting should you use is between 11-12 volts. If the voltage is too high or too low, the power supply must be changed.

What is a multimeter?

An instrument made to measure resistance, voltage, and electric current, often across a range of values.

You think your desktop computer's power supply is malfunctioning. To test the power supply, you should use a multimeter.

Between 11 and 12 volts should be seen on the multimeter. The power supply is failing and has to be replaced if it's too high or too low.

Hence, the multimeter setting should you use is between 11-12 volts.

To learn more about the multimeter refer:

https://brainly.com/question/5135212

#SPJ1

when two bodies of diffrent temprature in contact, heat will ​

Answers

Answer:

When two bodies at different temperatures are placed in thermal contact with each other, heat flows from the body at a higher temperature until they both reach the same temperature.

Explanation:

If you had a 14 m long timeline, where would the extinction of the dinosaurs be?

Captionless Image
About 1 m from the end where the universe formed.
About in the middle.
About 3/4 of the way from where the origin of the universe was to the end representing now.
Less than one meter from the end representing now.

Answers

If you had a 14 m long timeline, the dinosaurs would be less than one meter from the end.

What is extinction of species?

The extinction of species or organisms is the process by which some environmental factors cause a decline in the number of species through death.

Dinosaurs are some of the examples of species that are in extinct.

Since dinosaurs are in extinction, If you had a 14 m long timeline, the dinosaurs would be less than one meter from the end.

Learn more about extinction here: https://brainly.com/question/1048615

#SPJ1

The mass of a bicyclist and a bicycle together is 53.0 kg. How much work has been
done if the bicyclist slows the bicycle from a speed of 3.84 m/s to 1.27 m/s?
(A) -68.1 J
(B) -136 J
(C) -348 J
(D) -696 J

Answers

Answer:

Approximately [tex](-348\; {\rm J})[/tex], assuming that the bike was on level ground.

Explanation:

If an object of mass [tex]m[/tex] is moving at a speed of [tex]v[/tex], the kinetic energy of that object would be [tex](1/2)\, m\, v^{2}[/tex].

At a speed of [tex]v = 3.84\; {\rm m\cdot s^{-1}}[/tex], the kinetic energy of the bike and the cyclist- combined- would be:

[tex]\begin{aligned} &\frac{1}{2}\, m\, v^{2} \\=\; &\frac{1}{2}\times 53.0\; {\rm kg} \times (3.84\; {\rm m\cdot s^{-2}})^{2} \\ \approx \; & 390.76\; {\rm J}\end{aligned}[/tex].

At a speed of [tex]v = 1.27\; {\rm m\cdot s^{-1}}[/tex], the kinetic energy of the bike and the cyclist- combined- would be:

[tex]\begin{aligned} &\frac{1}{2}\, m\, v^{2} \\=\; &\frac{1}{2}\times 53.0\; {\rm kg} \times (1.27\; {\rm m\cdot s^{-2}})^{2} \\ \approx \; &42.741 \; {\rm J}\end{aligned}[/tex].

The energy change was approximately:

[tex]390.76\; {\rm J} - 42.741\; {\rm J} \approx 348\; {\rm J}[/tex].

If the bike was on level ground, the friction on the bike and the cyclist would have done a work of [tex](-348\: {\rm J})[/tex] to reduce the kinetic energy of the bike and the cyclist by that amount.

Answer: C) -348J

Explanation:

42.741 - 390.76 (the kinetic energy of the two speeds) is equal to -348.

How does newton’s third law of motion relate to a catapult?

PLEASE ANSWER ASAP. WILL GIVE BRAINLIEST

Answers

Answer: the force when the catapult swings has the same force as it does when coming down

Explanation:

for every reaction there is an equal opposite reaction

Yes ok it is ok an if it’s ok than you are ok and if I’m ok than your ok

Pls answer, i need help :(

Answers

Answer:  B

Explanation:  AN increase in heat out

Which property of sound waves decreases as the square of the distance from the source increases? A. Pitch
B. Intensity C. Wavelength D. Speed ​

Answers

Intensity is the property of sound waves that decreases as the square of the distance from the source increases. Option B is correct.

What is a sound wave?

A sound wave is produced when a medium begins to vibrate. When an entity vibrates, a pressure wave is formed, which causes sound.

As the square of the distance from the source increases, the intensity of sound waves decreases.

Sound intensity relationship

[tex]\rm {I} = \frac{1}{r^2}[/tex]

[tex]\rm \frac{I_2}{I_1} =\frac{r_1^2}{r_1^2}[/tex]

Hence, option B is correct.

To learn more about the sound wave, refer to

https://brainly.com/question/11797560.

#SPJ1

Which of the following is NOT an example of evidence that can be used to support the theory of evolution?
A. DNA evidence
B. Embryonic structures
C. Anatomical structures
D. Similar appearances in modern day organisms

Answers

D. Similar appearance in modern day organism to is the right naswer


A satellite with a mass of 120 kg fires its rocket thrusters, which give an impulse of 7440 kg-m/s. What was the total change in the velocity of the satellite — that is, what was the total AV?

A. 17 m/s
B. 88 m/s
C. 45 m/s
D. 62 m/s

Answers

From the calculation and the momentum of the body, the velocity is 62 m/s

What is momentum?

The term momentum refers to the product of mass and velocity. Now recall that the rate of change of momentum is equal to the impressed force.

Hence;

7440 kg-m/s = 120 kg * v

v= 7440 kg-m/s/120 kg

v =  62 m/s

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

5.4.2 Test (CST): Earth's Resources
Question 5 of 15
▬▬
The human population grows by about 2 percent each year, showing
growth.
OA. exponential
OB. linear
OC. cubic

Answers

The human population which grows by about 2 percent each year, is showing linear growth.

What is linear increment?

A linear increment occurs when a sequence increases gradually with a constant value.

If a population increases at the rate of 2%, the incremental rate or constant factor is 2%, thus, we can conclude that the human population which grows by about 2 percent each year, is showing linear growth.

Learn more about linear increment here: https://brainly.com/question/2511791

#SPJ1

a carmboard 4ft x 4ft Square has the queen at the centre the queen is hit by the striker moves to the front edge, rebounds and goes inta hole behind the striking line. find the magnitude of displacement of queen a) from the centre to front edge b) from the front end edge to hole (c) from centre to hole.​

Answers

Diagonal of cardboard=displacement to hole

√4²+4²4√2

So displacement till edge

4√2/22√2

Total distance

4√2+2√26√2ft

From centre to hole displacement

2√2

G= 10m/s
A 50kg student jumps out of a window onto a pile of mattresses.
(a) Ignoring air resistance, what is her increase in speed each second?

B) What is her change of momentum each second?

Answers

The increase in velocity of the student per second is 10 m/s^2 and her change in momentum each second is 500 kgm/s^2.

What is the change in velocity per second for any object falling freely under gravity?

The change in velocity of a moving object is known as acceleration.

For any object falling freely under gravity, the change in velocity per second or acceleration due to gravity is a constant and is equal to 10 metres per square second (10 m/s^2).

The change in momentum of a body is given as follows:

Momentum = mass × velocity Change in momentum = mv - muChange in momentum = m(v - u)acceleration = v - u

where m is mass, v is final velocity and u is final velocity.

Mass of the student = 50 Kg

Change in momentum each second = 50 kg × 10 m/s^2 = 500 kgm/s^2

Therefore, the increase in velocity of the student per second is 10 m/s^2 and her change in momentum each second is 500 kgm/s^2.

Learn more about change in momentum at: https://brainly.com/question/27778439

#SPJ1

Some iron has a coefficient of linear expansion of 12 x 10-6 / o K . A 100 mm length of iron piping is heated through 20 K. The pipe extends by:

Answers

Given that the linear expansion of the pipe is 12×10¯⁶ K¯¹, the pipe extends by 0.024 mm

Data obtained from the question Original length (L₁) = 100 mmChange in temperature (ΔT) = 20 KCoefficient of expansion (α) = 12×10¯⁶ K¯¹Change in length (ΔL) =?

How to determine the new diameter

α = ΔL / L₁ΔT

12×10¯⁶ = ΔL / (100 × 20)

12×10¯⁶ = ΔL / 2000

Cross multiply

ΔL = 12×10¯⁶ × 2000

ΔL = 0.024 mm

Learn more about linear expansion:

https://brainly.com/question/23207743

#SPJ1

What name is given to the force on an object caused by Earth's gravitational pull?​

Answers

Answer:

gravity

Explanation:

4. A weightlifter lifts a set of weights a vertical distance of 2 meters. If a constant net force of 350 N is exerted on the weights, what is the net work done on the weights?

Answers

Answer:

700 J

Explanation:

Work = Force * Distance

Work = 350 N * 2 M = 700 J

Which option is an example of an object that has potential energy followed by an object that has kinetic energy?

Answers

A ball held over a person's head | a ball rolling on the floor is an example of an object that has potential energy followed by an object that has kinetic energy.

What is Kinetic energy?

This is the type of energy possessed by a body by virtue of its motion or movement.

The rolling ball therefore has kinetic energy while a ball being held over a person's head has potential energy which is the energy possessed by a body by virtue of its position.

Read more about Kinetic energy here https://brainly.com/question/8101588

#SPJ1

The student notices that the electronic balance has a zero error, so it shows
mass readings that are all slightly too small.
This means that the density value is
A)incorrect and slightly too large
B)incorrect and slightly too small
C)correct because the student used three significant figures
D)correct because the mass of the block is more than zero

Answers

The student notices that the electronic balance has a zero error, so it shows mass readings that are all slightly too small. This means that the density value is incorrect and slightly too small. The correct option is B.

What is density?

The density is the ratio of the mass and the volume of the object. It is denoted by ρ.

ρ = mass/Volume = m/V

The student notices that the electronic balance has a zero error, so it shows mass readings that are all slightly too small.

As mass is directly proportional to density. The density will also be slight small when mass reading are all slightly small.

Thus, the correct option is B.

Learn more about density.

https://brainly.com/question/9215083

#SPJ1

A bat strikes a 0.145 kg baseball with force of 5800 N. What acceleration does the baseball experience?

Answers

Answer:

40,000 m/s²

Explanation:

The formula is given as Force = mass × acceleration, so then acceleration = Force / mass.

Therefore...

5800 N ÷ 0.145 kg = 40,000 m/s²

Which would result in a judge who is sitting beside the testing ground observing the tennis ball having a speed of 7 m/s?

Answers

Considering the frames of reference, the robot has to fire backwards at a speed of 2m/s.

What is relative velocity?

The relative velocity is obtained based on the inertial frame of reference. The term velocity is always measured relatively.

Given that the inertial frame of reference is relative to the moving frame then; 7m/s - 9 m/s = -2m/s.

It then follows that the robot has to fire backwards at a speed of 2m/s.

Missing parts:

Basim’s robotics team builds a robot that travels at 9 m/s and can fire a tennis ball at a target.

Which would result in a judge who is sitting beside the testing ground observing the tennis ball having a speed of 7 m/s?

The robot fires the ball forward with a speed of 7 m/s.

The robot fires the ball backward with a speed of 7 m/s.

The robot fires the ball backward with a speed of 2 m/s.

The robot fires the ball forward with a speed of 2 m/s.

Learn more about frame of reference:https://brainly.com/question/12222532?

#SPJ1

Answer:

C. the robot fires the ball backward with a speed of 2 m/s.

Where are heavier elements, like iron or gold made?
*
1 point
In space, between the stars
in the black holes at the centers of galaxies
In the hearts of stars
They were made as part of the big bang

Answers

Answer:

In the hearts of stars:

Theory tells us the elements heavier than iron are created by novas

that is when a star explodes, and any heavier elements were once created when a star exploded.

Which form of energy is converted to electrical energy in a voltaic cell?.

Answers

Answer:

chemical energy is converted to electrical energy in a voltaic cell.

A 1050 w electric toaster operates on a household circuit of 120 v. what is the resistance of the wire that makes up the heating element of the toaster

Answers

The Resistance of the wire that makes up the heating element of the toaster is 13.75Ω.

What is Resistance?

Resistance is the measure of the opposition to current flow in an electrical circuit.

S.I. Unit of resistance is ohms, symbolized by the Greek letter omega (Ω)

Also from Ohm's Law,[tex]R=\frac{V}{I}[/tex]

From power-current relation

P=VI

Also, [tex]I=\frac{P}{V}[/tex]

[tex]I = \frac{1050}{120}[/tex]

I = 8.75 A

From Ohm's Law,[tex]R=\frac{V}{I}[/tex]

[tex]R = \frac{120}{8.75}[/tex]

R = 13.75 Ω

The Resistance of the wire is 13.75 Ω

For more resistance questions visit

https://brainly.com/question/14547003

#SPJ1

A 950-kg car strikes a huge spring at a speed of 22m/s (fig. 11-54), compressing the spring 5.0m. (a) what is the spring stiffness constant of the spring? (b) how long is the car in contact with the spring before it bounces off in the opposite direction?

Answers

(a) The spring stiffness constant of the spring is 18,392 N/m.

(b) The time the car was in contact with the spring before it bounces off in the opposite direction is 0.23 s.

Kinetic energy of the car

The kinetic energy of the car is calculated as follows;

K.E = ¹/₂mv²

K.E = ¹/₂ x 950 x 22²

K.E = 229,900 J

Stiffness constant of the spring

The stiffness constant of the spring is calculated as follows;

K.E =  U = ¹/₂kx²

k = 2U/x²

k = (2 x 229,900)/(5)²

k = 18,392 N/m

Force exerted on the spring

F = kx

F = 18,392 x 5

F = 91,960 N

Time of impact

F = mv/t

t = mv/F

t = (950 x 22)/(91960)

t = 0.23 s

Learn more about spring constant here: https://brainly.com/question/1968517

#SPJ4

Rearrange the equation = KE
-1
2
- my? to solve for v. Show your work.

Answers

Answer:

See below

Explanation:

KE = 1/2 m v^2     multiply both sides by 2

2 (KE) = mv^2       divide both sides by m

2(KE) / m = v^2        sqrt both sides

√ [(2KE)/m ] = v

(
the average power transferred to the solar panels by sunlight is 26 000 w
calculate the average energy transferred to the solar panels in 30 seconde
use the equations
energy transferred = power time

Answers

Answer:

P = E / t       definition of power is energy / unit time

1 W = 1 Joule / sec      definition of 1 Watt of power

E = 2.6E4 J/s * 30 s = 7.8E5 Joules = 780,000 Joules

The average power transferred to the solar panels by sunlight is 26 000 w. The average energy transferred to the solar panels in 30 seconds is 780,000 joules.

To calculate the average energy transferred to the solar panels in 30 seconds, we can use the equation:

Energy transferred = Power × Time

Given that the average power transferred to the solar panels is 26,000 watts and the time is 30 seconds, we can substitute these values into the equation:

Energy transferred = Power × Time

Energy transferred = 26,000 × 30

Energy transferred = 780,000 watt-seconds

Since the watt-second is equivalent to the joule (J), the energy transferred to the solar panels is 780,000 joules.

Therefore, the average energy transferred to the solar panels in 30 seconds is 780,000 joules.

To know more about energy and power:

https://brainly.com/question/34423421

#SPJ5

Other Questions
After years of successful existence, a company producing Smart TV formulated an equation for the cost P of manufacturing n number of television sets. The equation is P(n)=1200n+700. Find the cost of 50 television set. a. Php 59,300 b. Php 60,000 c. Php 60,700 d. Php 61,200 Which sentence could best be revised to action voice This Week's High Temperatures (F)29, 38, 45, 31, 50, 58, 62Last Week's High Temperatures (F)44, 31, 66, 32, 26, 58, 78Which measures of center and variability for thetemperatures were lower this week than last week?Check all that apply.meanmedianmoderangemean absolute deviationDone 12. Convierte estas fracciones impropias en nmeros mixtos:A. 15/7=B. 16/6=C. 12/5=D. 48/7Por favor. does someone mind helping me with this question? Thank you! An exception occurred while processing your request. additionally, another exception occurred while executing the custom error page for the first exception. the request has been terminated. Which of the following transactions was not part of the triangular trade between Europe, Africa, and the Americas?A.Finished goods from Europe were used to purchase slaves in Africa.B.Slaves from Africa were used to produce raw materials in the Americas.C.Raw materials from the Americas were shipped to Europe.D.Slaves from the Americas were sold in Africa in exchange for finished goods.Please select the best answer from the choices provided. what is the polar coordinate of (0, pie) Blank + -5 = -63................................ If you lose your current license because you have moved to another state or country and obtained a new license, your old license has been: unit rate for typing 34 words in a minute in a half Cookery ______ the ________ of science, for the observations of prehistoric cooks laid the foundation of early chemistry a) Ignored . . Precision b) advanced . . development c) aided . . decline e) betrayed . . methodology Q2 Alice wants to find the pressure she exerts upon the floor. She measures the length and width of her shoe and multiplies them together to get a rough area. She then doubles the answer. She divides her weight in newtons by the total area she has worked out. a) Why won't her area measurement be very accurate? Who can appropriately use the DSM? Select all that apply.graduate students studying the social sciencesmental health professionalspsychiatristsanyone who has read the manual and understands its contents Ten minutes after you stop exercising, your heart rate should be (2 points)equal to your Heart Rate Reservein your Target Heart Rate Zoneless than 50 beats per minuteless than 100 beats per minute Which question should Santiago ask himself tocontinue this research process?O Should I use more online tools to locate more usefulinformation?O Which research question is the most important onefor me to focus on?O Should I gather additional primary sources toconfirm my findings?O Which research question would my audience mostenjoy learning about? You need to invest $1000 in a bank account and are give two options. The first option is to earn $50 every month you leave the money in the account. The second one is to earn 3% interest each month. Describe each of these two functions and make a table of values for each for several months. Which account would you choose? An advantage of doing company research before an interview is: a. it improves the applicants ability to market their skills b. it can increase the confidence of the applicant c. it can compensate for a lack of experience d. all of the above please select the best answer from the choices provided a b c d Determine the probability of the treatment groups mean being greater than the control groups mean by 8 points or more. Then complete the statements.The significance level is set at 5%, and the probability of the result is %, which is the significance level. The result is . I NEED HELP ASAP!!!Amalia and Alec are studying the growth of a plant over time. They measure the height of the plant at the end of each week for several weeks and display the data in a scatter plot. They then find the equation for the best-fit line to be y=2.5 + 1.25rMULTIPLE CHOICE Question 7 Amalia and Alec are studying the growth of a plant over time. They measure the height of the plant at the end of each week for several weeks and display the data in a scatter plot. They then find the equation for the best-fit line to be y= 2.5 + 1.25x X = the number of weeks that have passed= the height of the plantThey want to use the equation to estimate when the height of the plant will be 10Amalia's estimate is after 6 weeks. Alec's estimate is after Week 15.Is either student correct?