Answer:
c
Explanation:
This is because many things, such as pcs, over heat
Preheats the engine when the vehicle is started the next time. Therefore, the correct answer is option C.
The coolant heat storage system is designed to store heat from the exhaust system when the vehicle is operating and then use that heat when it is started again. This gives the car a kind of "head start" and the engine does not need to work as hard to heat up and become ready for driving. This can save on fuel consumption and hydrocarbon emissions. This process is done with the use of a condenser to store the heat energy. Additionally, the coolant heat storage system can also help to prevent the engine from overheating in hot weather and conditions.
Therefore, the correct answer is option C.
Learn more about the coolant heat storage system here:
https://brainly.com/question/11912897.
#SPJ6
When block C is in position xC = 0.8 m, its speed is 1.5 m/s to the right. Find the velocity of block A at this instant. Note that the rope runs around the pulley B and a pin attached to block C, as indicated.
Answer:
The answer is "2 m/s".
Explanation:
The triangle from of the right angle:
[tex]\to (x_c-0.8)+(1.5+y_4) +\sqrt{x_c^2 + 1.5^2}= constant[/tex]
Differentiating the above equation:
[tex]\to V_c +V_A+ \frac{X_cV_c}{\sqrt{x_c^2 +1}}=0\\\\\to 1-V_A+ \frac{0.8 \times 1.5}{\sqrt{ 0.8^2+1.5}}=0\\\\[/tex]
[tex]\to V_A= \frac{1.2}{\sqrt{ 0.64+1.5}}+1\\\\[/tex]
[tex]= \frac{1.2}{ 1.46}+1\\\\= \frac{1.2+ 1.46}{ 1.46}\\\\ = \frac{2.66}{1.46}\\\\= 1.82 \ \frac{m}{s}\\\\= 2 \ \frac{m}{s}[/tex]
how to update android 4.4.2 to 5.1 if there isnt any update available
Answer:
You cant update it if there isin´t any update available lol
Explanation:
*sapnap teaching you how to drive*
"Skeppy and Badboyhalo are crossing the street, what do you hit?"
"Skeppy, I would never hurt Bad."
"whA- THE BRAKES YOU HIT THE BREAKS!!"
*Dream wheezing from the back*
Answer:
yes dream
Explanation:
Answer:
Me: "i would just hit you, sapnap. In the freaking face" LOL
Why is it so dangerous to use a ground lift on a metal cased power tool
The hydrofoil boat has an A-36 steel propeller shaft that is 100 ft long. It is connected to an in-line diesel engine that delivers a maximum power of 2490 hp and causes the shaft to
The question is incomplete. The complete question is :
The hydrofoil boat has an A-36 steel propeller shaft that is 100 ft long. It is connected to an in-line diesel engine that delivers a maximum power of 2590 hp and causes the shaft to rotate at 1700 rpm . If the outer diameter of the shaft is 8 in. and the wall thickness is [tex]$\frac{3}{8}$[/tex] in.
A) Determine the maximum shear stress developed in the shaft.
[tex]$\tau_{max}$[/tex] = ?
B) Also, what is the "wind up," or angle of twist in the shaft at full power?
[tex]$ \phi $[/tex] = ?
Solution :
Given :
Angular speed, ω = 1700 rpm
[tex]$ = 1700 \frac{\text{rev}}{\text{min}}\left(\frac{2 \pi \text{ rad}}{\text{rev}}\right) \frac{1 \text{ min}}{60 \ \text{s}}$[/tex]
[tex]$= 56.67 \pi \text{ rad/s}$[/tex]
Power [tex]$= 2590 \text{ hp} \left( \frac{550 \text{ ft. lb/s}}{1 \text{ hp}}\right)$[/tex]
= 1424500 ft. lb/s
Torque, [tex]$T = \frac{P}{\omega}$[/tex]
[tex]$=\frac{1424500}{56.67 \pi}$[/tex]
= 8001.27 lb.ft
A). Therefore, maximum shear stress is given by :
Applying the torsion formula
[tex]$\tau_{max} = \frac{T_c}{J}$[/tex]
[tex]$=\frac{8001.27 \times 12 \times 4}{\frac{\pi}{2}\left(4^2 - 3.625^4 \right)}$[/tex]
= 2.93 ksi
B). Angle of twist :
[tex]$\phi = \frac{TL}{JG}$[/tex]
[tex]$=\frac{8001.27 \times 12 \times 100 \times 12}{\frac{\pi}{2}\left(4^4 - 3.625^4\right) \times 11 \times 10^3}$[/tex]
= 0.08002 rad
= 4.58°
what should always be done before beginning any diagnosis?
A. Test drive
B. Change the oil filters
C.Fill out a diagnostic worksheet
D.Verify the customer concern
Answer:
c
Explanation:
if someone is wrong that they can help with
what is 2+2 equal to
Answer:
4
or
22
Explanation:
Shops should avoid purchasing any material sold in ____________.
Answer: Aerosol Cans
Explanation: I just did the quiz
What is the value of the work interaction in this process?
a. -272 kJ/kg
b. -32 kJ/kg
c. 31 kJ/kg
d. 272 kJ/kg
Answer:
The answer is "[tex]-121\ \frac{KJ}{Kg}[/tex]".
Explanation:
Please find the correct question in the attachment file.
using formula:
[tex]\to W=-P_1V_1+P_2V_2 \\\\When \\\\\to W= \frac{P_1V_1-P_2V_2}{n-1}\ \ or \ \ \frac{RT_1 -RT_2}{n-1}\\\\[/tex]
[tex]W =\frac{R(T_1 -T_2)}{n-1}\\\\[/tex]
[tex]=\frac{0.287(25 -237)}{1.5-1}\\\\=\frac{0.287(-212)}{0.5}\\\\=\frac{-60.844}{0.5}\\\\=-121.688 \frac{KJ}{Kg}\\\\=-121 \frac{KJ}{Kg}\\\\[/tex]
What are motion study principles? How are they classified?
Frederick Taylor created a series of guidelines known as the "motion study principles" to boost productivity at work. Time study, motion study, fatigue study, etc technique conduct research are the four divisions into which they fall.
What is motion study principles?Motion studies are the study of actions like lifting, putting things down, standing, changing direction, and other actions that are made when performing routine work.
In order to execute the task effectively in less time, unnecessary moves are attempted to be removed. The following three headings comprise the fundamentals: Making use of the human body. The layout of the workplace. Machinery and tools design.
Motion study principles will be the which will help in designing or putting films into a particular order. Also how the routine works are being made is suggested.
Learn more about motion study, here:
https://brainly.com/question/30164973
#SPJ3
The two types of outlets that are found in an electrical system are:______
a. lighting and receptacle outlets.
b. receptacle and motor outlets.
c. power and motor outlets.
d. heating and power outlets
Answer:
a. lighting and receptacle outlets
Explanation:
The two types of outlets that are found in an electrical system are
a. lighting and receptacle outlets
Outlets allow electrical equipment to connect to the electrical grid. The electrical grid provides alternating current to the outlet.
definition of ceramics
Answer:
Ceramics are generally made by taking mixtures of clay, earthen elements, powders, and water and shaping them into desired forms. Once the ceramic has been shaped, it is fired in a high temperature oven known as a kiln. Often, ceramics are covered in decorative, waterproof, paint-like substances known as glazes.
Explanation:
Answer:
made essentially from a nonmetallic mineral (such as clay) by firing at a high temperature.
Explanation:
Calculate the tensile modulus of elasticity for a laminated composite consisting of 62 percent by volume of unidirectional carbon fibers and an epoxy matrix under isostress conditions. The tensile modulus of elasticity of the carbon fibers is 340 GPa and that of the epoxy is 4.50 103 MPa.
Answer:
4.30 gp
Explanation:
''.''
How to update android 4.4.2 to 5.1
Answer:
try settings and go to updates?
Explanation:
C++ question
Thank you
john, a team member, has completed e0 - agile for beginners he wants to contribute to tcs agile vision. he wants to find out what is planned for his account.
whom should he details
Answer:
John should detail his Scrum Master.
Explanation:
The Team Lead or Scrum Master coordinates the tasks of individual team members and supports the progress of the team. The Scrum Master usually receives instructions from the Product Owner and then ensures that the tasks are performed accordingly. She also coaches the Development Team and works with the Product Owner to carry out daily development activities. She also drives the Scrum Values and Principles, ensuring that the team members understand and practice them.
When you receive a vertical promotion, you are more likely to _______ than when you receive a horizontal promotion. a. Deal with a new department b. Gain management responsibilities c. Earn a similar salary d. Retain the same authority Please select the best answer from the choices provided A B C D
Answer:
b. Gain management responsibilities
Explanation:
When you receive a vertical promotion, you are more likely to Gain management responsibilities than when you receive a horizontal promotion.
if stall speed in ktas for an aircraft us 100 ktas at sea level, what is the stall speed in ktas of the aircraft at 5000 ft density altitude
Answer:
my friend here justin
Explanation:
hes already taken
How did engineers help to create a ceiling fan
Answer:
The electric ceiling fan was invented in 1882 by engineer and inventor, Philip Diehl. He had earlier invented an electric sewing machine and adapted the motor from this invention to create the ceiling fan. He called his invention the “Diehl Electric Fan” and it was such a success that he soon had many other people competing with him.
Explanation:
Read the directions for making a toy parachute.
1. Cut thick string or twine into four pieces that are 9 inches long.
2. Cut a 12x5-inch rectangle out of a plastic garbage bag.
3. Using a hole punch, poke a hole into each corner of the rectangle.
4. Slide the end of each piece of string through a hole in the rectangle.
5. Tie a knot to the end of each string so that they are attached to the corners of the plastic rectangle.
6. Either tape or tie the loose ends of the string to a small object, such as an action figure or toy car.
7. Hold the top of the parachute so that the object hangs loosely below it.
8. Find a high place from which to drop your parachute, such as a chair or a small wall.
9. Softly toss your parachute into the air, and watch it float to the ground.
What would likely happen if someone skipped step 3?
The pieces of string would be different lengths.
The string would not attach to the object.
The string would not attach to the plastic.
The plastic rectangle would be a different size.
Answer:
D
Explanation:
heres proof
Answer:
he/she is right
Explanation:
Which is the most common source of abnormal noises in an air
conditioner?
Select one:
A. Evaporator
B. Condenser
C. Compressor
D. Expansion valve
Answer is: letter B.Condenser
Explanation:
common issue associated with an air conditioner screeching noise is a malfunctioning fan motor in the outdoor condenser unit. The central air conditioning system connected to your home features a fan that is designed to remove heat from the refrigerant.
Water and air quality are critical issues facing human society.
True
False
Humans impact the physical environment in many ways: overpopulation, pollution, burning fossil fuels, and deforestation. Changes like these have triggered climate change, soil erosion, poor air quality, and undrinkable water.
53. The plan of a building is in the form of a rectangle with
centerline dimension of outer walls as 9.7mx14.7m. The
thickness of the wall in super structure is 0.30m. Then its
plinth area is
a) 150m
b) 145m2
c) 145.5m
d) 135.36m
.
Answer: 150m
Explanation:
The following can be depicted from the question:
Dimensions of outer walls = 9.7m × 14.7m.
Thickness of the wall = 0.30 m
Therefore, the plinth area of the building will be:
= (9.7 + 0.30/2 + 0.30/2) × (14.7 × 0.30/2 + 0.30/2)
= 10 × 15
= 150m
The plinth area will be 150m.
Given information
Dimensions of outer walls = 9.7m × 14.7m.
Thickness of the wall = 0.30 m
Plinth area of the building = (9.7 + 0.30/2 + 0.30/2) × (14.7 × 0.30/2 + 0.30/2)
Plinth area of the building = 10 × 15
Plinth area of the building = 150m
Therefore, the Option A is correct.
Read more about Area
brainly.com/question/25292087
1)A wheel is used to turn a valve stem on a water valve. If the wheel radius is 1 foot and the stem, (axle), radius is .5 inches, what is the mechanical advantage of the wheel and axle? 2)How much resistance force can ideally be overcome when an effort of 80 lbs is applied to the wheel of the water valve in problem 1? 3)What is the linear distance traveled when a 2.5' diameter wheel makes one revolution? 4)A compressor motor has a 1.00 inch output shaft (axle) that drives a 4.00inch pulley (wheel). If the motor output shaft supplies 24 lbs of force, ideally how much force does the pulley apply to the drive belt wrapped around it? 5) If the belt pulley's force is measured to be 4 lbs, what is the AMA wheel and axle here?6) What is the efficiency of the compressor motor – belt pulley wheel and axle?
Answer:
for 13
Explanation:
''.''
Complete the sentence to identify a useful advance in the culinary arts.
The Egyptians invented
, which they used to store
for many years.
Answer:
silos to store grains
Explanation:
I got it from PLATO... hope this helps...
A broad range of subjects are included in the culinary arts. Food science and nutrition, ingredient quality, seasonality, flavors and textures, presentation and plate layout, and more are some of these. There are numerous specialties, sub-niches, and job titles that fall within this broad category.
What are the characteristics of culinary arts?Additionally, to help students become more well-rounded cooks, a variety of cooking techniques, numerous recipes, new ingredients, and various flavor profiles are presented to them.
The term “culinary arts” is used to refer broadly to the processes involved in preparing, cooking, plating, presenting, and serving food. It relates to meals and the goods, not sweets or breads. That make up a meal, such as appetizers, side dishes, and main courses.
Therefore, Students who pursue a culinary education have the opportunity to study under several of the industry's best chefs.
Learn more about art here:
https://brainly.com/question/19049629
#SPJ5
True or false It is legal to pass in Florida when approaching within 100 feet of or traversing any railroad crossing grade croead
Americans spent approximately __ cents of each dollar on the purchase of energy?
Answer:
14 cents
Explanation:
1 trillion US dollar
A beaker is filled to the 500 ml mark with alcohol. What increase in volume (in ml) the beaker contain when the temperature changes from 5°C to 30°C? (Neglect the expansion of the beaker, evaporation of alcohol and absorption of water vapor by alcohol.) C°, Palcohol = 1.12 x 104/ °C
Answer:
1.4 mL
Explanation:
Given that:
volume of alcohol [tex]V_0[/tex] = 500
Temperature change ΔT = (30° - 5°)C
=25° C
[tex]\beta_{ alcohol }= 1.12 \times 10^{-4} / ^0C[/tex]
The increase in volume ΔV = [tex]\alpha \times V_o \times \Delta T[/tex]
[tex]= 500 \times 1.12 \times 10^{-4} / ^0 C\times 25^0 C[/tex]
= 1.4 mL