The following reaction occurred when a strip of aluminum was placed in a nickel solution. Which half-reaction represents the oxidation that has occurred in the reaction?

Proton number is called atomic number.

The chemical element's atomic number, also referred to as the nuclear charge number, is determined by the charge number of an atomic nucleus. This is the quantity of protons in the nucleus of each of that element's atoms. The atomic number refers to the number of protons in the nucleus of an atom. The amount of protons in an element determines what kind of element it is.

Both protons and electrons are equal in number in a neutral atom. The mass of an atom, represented by the letter M, is equal to the total of its protons and neutrons in the nucleus.

The number of protons in the atom's nucleus is therefore equal to the atomic number (Z). in an uncharged atom.

Learn more about atomic numbers:

brainly.com/question/16858932

#SPJ4

The assumed or arbitrary molarity of anions in the chemist's solution is found out to be 2.17 M.

Since neither the mass of magnesium bromide  and the volume of the volumetric flask are not given, one can assume arbitrary values and you could modify them whenever you want, thus, let 50.0g of magnesium bromide to be the measured out amount of solute and a 250-mL volumetric flask where the solution is prepared, so the final volume of the solution is 250 mL after the addition of distilled water. In this manner, the bromide anions moles, taking into account there are two bromide moles per magnesium bromide moles giving the value of 0.543 mols.

The molarity can be calculated as follows:

M= 0.543 mol Br-/0.250 L= 2.17 M

To learn more about molarity check the link below:

https://brainly.com/question/14469428

#SPJ4

Electron geometry is trigonal bipyramidal. Molecular geometry is T-shaped for iodine trifluoride, IF3.

Trifluoroiodine, often known as iodine trifluoride, has the chemical formula IF3. It is an unstable interhalogen chemical molecule. It has a yellow solid appearance and easily breaks down at temperatures higher than -28°C. Because of IF3's fragility, it is mostly unknown and undiscussed in the scientific community.In light of all of the aforementioned information, this article provides you with a basic introduction to IF3, covering topics such as how to draw its Lewis structure, molecular geometry, or shape of IF3, electron geometry, bond angle, hybridization, polar or non-polar nature, and/or any formal charges present on IF3 atoms.

Complete question:6. What are the electron and molecular geometries, respectively, for iodine trifluoride, IF3?

A. Electron geometry is trigonal bipyramidal.Molecular geometry is T-shaped.

B. Electron geometry is octahedral.Molecular geometry is T-shaped.

C. Electron geometry is trigonal bipyramidal.Molecular geometry is trigonal planar.

D. Electron geometry is trigonal planar.Molecular geometry is trigonal bipyramidal.

Learn more about T-shaped  refer:brainly.com/question/24212702

#SPJ4

Answer:

The electron geometry of IF3 is trigonal bipyramidal. But the molecular shape of IF3 is T-shaped. The bond angles formed between each atom are close to 90 degrees.

Explanation:

Thermodynamic data is data that relates to the physical properties of a system related to temperature, pressure, and energy.

What is  Thermodynamic data?

Thermodynamic data is data that describes the physical properties of a material system in terms of temperature, pressure, and other thermodynamic variables. It is used to predict the behavior of materials in different conditions and to analyze processes such as heat transfer or chemical reactions. It is also used to design and optimize energy systems, such as engines and power plants.

The standard change in entropy when one mole of sodium nitrate is dissolved in water is:

ΔS° = S° (products) - S° (reactants)

ΔS° = (60.25 + 146.4) - 116.3 = 90.3 J/K•mol

The solubility of sodium nitrate will increase if the temperature of the system is increased.

To know more about thermodynamic data,

https://brainly.com/question/14265296

#SPJ4

Answer: Correct option is B . calcium and iron  decrease the absorption of lead in the body.

Explanation: calcium and iron  decrease the absorption of lead in the body without affecting its solubility,probably by competing for shared absorptive receptors in the intestinal mucosa. The total body burden of lead does not affect lead absorption. Thus, lead does not have a feedback mechanism which limits absorption.

The molecular formula of a compound whose empirical formula is CH4 and has a molar mass is 32. 086 g/mole is C

The molecular formula of a compound is the actual number and types of atoms that make up a molecule. It gives the exact number of atoms of each element in a molecule.

On the other hand, the empirical formula of a compound represents the simplest whole number ratio of atoms that make up a compound. It gives the lowest whole number ratio of atoms of each element in a molecule.

Multiply the subscripts in the empirical formula by a factor needed to reach the molar mass of the compound. In this case, CH4 has a molar mass of 16.04 g/mol and the compound has a molar mass of 32.086 g/mol.

32.086 g/mol/16.04 = 2

Multiplying the subscripts by 2, the molecular formula of the compound is C2H8.

Learn more about molecular formula here: https://brainly.com/question/20146794

#SPJ4

C14 have 8 neutrons, because C have 6 atomic number and it have 14 atomic mas , where atomic mass is total of proton and neutron so the neutron of C14 is 8.

It is commonly known that Carbon-14 is an isotope of carbon. It is also known as a neutral atom. Additionally, the ratio of neutrons to protons varies among different isotopes.

The total number of protons that make up an atom's nucleus is represented by the atomic number of that atom, as is well known. We know that carbon has an atomic number of 6, a mass number of 14. It is common knowledge that mass is the product of protons and neutrons. There will thus be = 14 - 6 = 8 neutrons.

Learn more about neutron at brainly.com/question/29248303

#SPJ4

The volume of nitrogen produced from the reaction of 6.8 L of carbon monoxide is 3.7 L

In order to determine the volume of nitrogen produced from the reaction of 6.8 L of carbon monoxide, we need to use the balanced equation for the reaction:

2CO(g) + 2NO(g) -> N2(g) + 2CO2(g)

From the equation, we can see that for every 2 moles of CO that react, 1 mole of N2 is produced. The volume of a gas is directly proportional to the number of moles of the gas present.

If the initial volume of CO is 6.8 L, we can assume that the number of moles of CO is

6.8 L / 24.45 L/mol = 0.278 mol.

Therefore, the number of moles of N2 produced would be

0.278 mol CO * (1 mol N2 / 2 mol CO) = 0.139 mol N2.

Finally, using the ideal gas law PV = nRT (where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature), we can calculate the volume of N2 produced:

V = nRT / P

V = 0.139 mol N2 * (8.314 J/mol*K) * (273 K) / (1 atm) = 3.7 L

So, the volume of nitrogen produced from the reaction of 6.8 L of carbon monoxide is 3.7 L.

Learn more about Ideal Gas Law here: https://brainly.com/question/4147359

#SPJ4

the hybridization of the sulfur atom change in the series SF2, SF4, SF6-Option 1 - sp, sp^3, sp^3 d^2 O sp^3, sp^3 d^2

The hybridization of the sulfur atom changes in the series SF2, SF4, SF6 as follows:

In SF2, the sulfur atom is in the sp hybridized state, meaning it has one s and one p orbital in its valence shell. This allows the sulfur to form a double bond with one fluorine atom.In SF4, the sulfur atom is sp3 hybridized, which means it has one s and three p orbitals in its valence shell. This allows the sulfur to form four single bonds with four fluorine atoms.In SF6, the sulfur atom is sp3d2 hybridized, which means it has one s, three p, and two d orbitals in its valence shell. This allows the sulfur to form six single bonds with six fluorine atoms.It is worth noting that the hybridization of the sulfur atom in SF6 is not very common and it is more likely the octahedral electron pair geometry of SF6 is achieved by the d orbitals of sulfur being empty and the sulfur atom being sp3 hybridized. In summary, the hybridization of sulfur in SF2 is sp, in SF4 is sp3, and in SF6 is sp3d2.

To learn more hybridization here:

https://brainly.com/question/14140731

#SPJ4

The major organic product of this reaction is 2-bromobutane, a saturated hydrocarbon with a bromine atom attached to the second carbon atom.

The major organic product is 2-bromobutane.

Structure:

CH3 CH2 CH2 CH2 Br

    |   |   |

    CH3 CH2 Br

1) The reaction begins with bromine reacting with the 2-methylpropane molecule to form the intermediate 2-bromo-2-methylpropane.

2) The intermediate then reacts with hydroxide ions to form the final product, 2-bromobutane.

3) The final product is a saturated hydrocarbon with a bromine atom attached to the second carbon atom.

The major organic product of this reaction is 2-bromobutane, a saturated hydrocarbon with a bromine atom attached to the second carbon atom.

learn more about hydrocarbon here

https://brainly.com/question/17578846

#SPJ4

Based on concepts you learned in the lesson, Barrett who says he can’t wait until we discover element 120 in our environment is correct because we discover new elements everyday.

This is referred to as a chemical substance that cannot be broken down into other substances and examples include sodium , hydrogen etc.

We can infer from this argument that Barrett is correct because new elements are being discovered by scientists from time to time so it is false to say they won't be discovered anymore,.

Read more about Element here https://brainly.com/question/6258301

#SPJ1

The supplied statement indicates that the compound's molecular formula is (CH)ₙ = CH₆ = C₆H₆

Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is now most widely employed are urea manufacturing and petroleum refining, with the developing markets of utilities and transportation.

The lowest half figure ratio of a compound is revealed by the empirical formula for that molecule.

Empirical weight formula: 12 + 1 Equals 13.

Molecular weight = 78

n = Molecular weight/Empirical formula weight

n = 78.12/13

n = 6.00

Molecular formula = (CH)ₙ = CH₆ = C₆H₆

To know more about Hydrogen visit:

https://brainly.com/question/24433860

#SPJ1

Considering the definition of molar mass,  the mass in 2.6 moles of C₈H₁₂ is 0.2808 kg.

The molar mass of an atom or molecule is the mass of one mole of that particle expressed in grams.

The molar mass of a compound is the sum of the molar mass of the elements that form it multiplied by the number of times they appear in the compound.

Being the molar mass of C₈H₁₂ 108 g/mole, you can apply the following rule of three: If by definition of molar mass 1 mole of the compound contains 108 grams, 2.6 moles of the compound contains how much mass?

mass= (2.6 moles× 108 grams)÷ 1 mole

mass= 280.8 grams= 0.2808 kg (being 1000 gr= 1 kg)

Finally, the mass is 0.2808 kg.

Learn more about molar mass:

brainly.com/question/5216907

brainly.com/question/11209783

brainly.com/question/7132033

brainly.com/question/17249726

#SPJ1

The amide group in salicylamide is electron withdrawing, the hydroxyl group on the ring is a highly active, electron donating substituent. The hydroxyl group donates electrons, guided entry iodide to a para position.

A substituent is an atom that are substituted for an atom here on parent chain of such a hydrocarbon in both chemistry and biochemistry constituting a moiety of the resulting new molecule.

Alkyl groups are substitutes created from alkanes. The names of alkyl groups and unbranched alkane chains are similar. Alkyl groups may branch as well. For instance, the butyl substituent has three constitutional isomers.

To know more about Substituent visit :

https://brainly.com/question/14970034

#SPJ4

in the given following elements when the central atom could exhibit sp 3 d 2 hybridization , Sulphur(S)  can exhibit the asked configuration.

Z=16  for Sulphur

Electronic configuration [tex]1S^{2} 2S^{2} 2P^{6} 3S^{2} 3P^{2} 3D^{0}4S^{0}[/tex]   here we can clearly see that the energy difference between the 3p and 3d shell is very so sulphur can exhibit the asked configuration.

Z=6 for Carbon C - [tex]1S^{2} 2S^{2} 2P^{2}[/tex]

Z=7 for Nitrogen N- [tex]1S^{2} 2S^{2} 2P^{3}[/tex]

Z=5 for Boron B- [tex]1S^{2} 2S^{2} 2P^{1}[/tex]

Here we can clearly see that the atom is very small d the shell is not present in the configuration above also the energy difference between the shells will be high as they are close to the nucleus hence the asked configuration can not be exhibited.

To learn more about Electronic Configuration

brainly.com/question/29757010

#SPJ4

Andrea Ghez's favorite star is known as SO-2 and it is her favorite star because this star goes around the universe in a short period. I do not have a favorite star because I do not know a lot about stars.

Andrea Ghez is female astrophysicst who was born in the United States known for being one of the few women in the world who have gotten the Nobel Prize in Physics. During her life, Andrea has studied the center of the universe, black holes and the stars. Moreover, she was known for giving a TED talk in whiich she explained about stars and black holes.

In the TED talk given by Andrea Ghez she mentions her favorite star is the  SO-2 as "it goes around in only 15 years".

I do not have a favorite star because I do not know a lot about stars, although I believe studying them is very interesting.

Note: This question is incomplete; here is the missin information:

TED Talk- Andrea Ghez

"Now, most astronomers have a favorite star, and mine today is a star that's labeled up there, SO-2. Absolutely my favorite star in the world. And that's because it goes around in only 15 years. And to give you a sense of how short that is, the sun takes 200 million years to go around the center of the galaxy"

Learn more about stars in: https://brainly.com/question/7379319

#SPJ1

A compound has the empirical formula CH and is made up of carbon and hydrogen. the compound's molecular formula is C6 H6.

Compounds that involve a metal binding with a non-metal or a semi-metal will typically exhibit ionic bonding. Molecular compounds are those whose only non-metals or semi-metals contain non-metals. These compounds exhibit covalent bonding.

The compound with the lowest whole number ratio can be found in its empirical formula.

The empirical formula for weight is 12+1=13,

while the molecular formula for weight is 13 78 = 6.

The molecular formula for weight is (CH)n = (CH)6 =C6 H6.

To learn more about compound's molecular here:

https://brainly.com/question/23088724

#SPJ1

The concentration of the standard solution (in M) if 15 mL of a 0.2512 M Co(NO3)2 stock solution is added to a 50 mL volumetric flask and diluted to the mark is  0.07536M.

Given volume of Co(NO3)2 stock solution (V1) = 15mL =0.015L

Concentration of Co(NO3)2 stock solution is (M1) = 0.2512M

Volume of  volumetric flask (V2) = 50mL = 0.050L

Concentration of standard solution = M2

The number of moles of solute divided by the number of liters of solution is the definition of molarity, a concentration unit in chemistry.

We know that M1V1 = M2V2. Such that,

0.2512 x 0.015 = M2 x 0.050

M2 = 0.07536M

Hence the required concentration of standard solution is  0.07536M

To learn more about concentration click here https://brainly.com/question/10725862

#SPJ4

In the molecule C2H4, valence orbitals of the carbon atoms are assumed to be e) sp^2 hybridized.

The set of orbitals that can energetically accept electrons to create chemical bonds is known as the valence shell. The ns and np orbitals in the outermost electron shell make form the valence shell for main-group elements.

The outside electrons engaged in bonding are called valence electrons. A particular atom can have 0 to 7 valance electrons since valance electrons can only exist in the s and p orbitals. Noble gases are atoms that have no valence electrons and dislike forming bonds.

To know more about valence orbitals, refer

https://brainly.com/question/14312272

#SPJ4

Answer:

P₂N₂I₄

Explanation:

Firstly, we calculate the empirical formula of the compound. To do this we find the moles of each element. Treat the percentages as masses.

The formula for moles is:

[tex]moles = \frac{mass}{relative \: atomic \: mass}[/tex]

The masses of each element are:

Phosphorus = 10.37g

Nitrogen = 4.689g

Iodine = 84.95g

The relative atomic masses of each element are:

Phosphorus = 31.0

Nitrogen = 14.0

Iodine = 126.9

Using these values, we can calculate the moles of each element:

[tex]moles \: of \: phosphorus = \frac{10.37}{31.0} = 0.335[/tex]

[tex]moles \: of \: nitrogen \: = \: \frac{4.689}{14.0} = 0.335[/tex]

[tex]moles \: of \: iodine \: = \: \frac{84.95}{126.9} = 0.669[/tex]

Using the moles, write them in a ratio to find the ratio of moles:

Phosphorus : nitrogen: iodine

0.335 : 0.335: 0.669

The smallest number here is 0.335, so divide each number by 0.335

0.335÷0.335=1

0.335÷0.335=1

0.669÷0.335=1.99... = 2 (round to the nearest whole number)

These numbers are used as the subscripts of each element.

This means that the empirical formula is:

PNI₂

To calculate the molecular formula:

[tex]\frac{molar \: mass \: of \: molecular \: formula}{molar \: mass \: of \: empirical \: formula}[/tex]

The molar mass of empirical formula is adding the molar masses of compound PNI2:

31.0 + 14.0 + 126.9 = 171.9

The molar mass of molecular weight or mass = 298.8 (given from the question)

Substitute these in the formula above:

[tex] \frac{298.8}{171.9} = 1.738...[/tex]

1.738 = 2 rounded to the nearest whole number.

Multiply all the subscripts seen in the empirical formula by the number 2:

PNI₂ × 2 = P₂N₂I₄

The volume of gas produced by six tablets would be twice the volume produced by three tablets, or 600 cm³ x 2 = 1200 cm³.

Until they are enclosed in a container, gases lack a definite shape or volume. Gases can expand and contract as they are forced into various container sizes and shapes because of the way their molecules spread out and move randomly.

The volume of the container in which a gas is contained can be used to define the volume of the gas itself.

The volume of a gas reduces as the molecules are crammed closer together when it is compressed. A gas's volume rises when it expands.

To know more about volume of gas visit: https://brainly.com/question/12357202

#SPJ4

Answer:

1200 cm³.

Explanation:

1.trans-[Pt(en)2Cl2]2+  

2.coordination compound Na [Al (OH)] systematic name: sodium tetrahydroxidoaluminate (III)

For several industrial and technical applications, sodium aluminate serves as an efficient supply of aluminum hydroxide. A white crystalline solid with the chemical formula NaAlO2, NaAl(OH)4 (hydrated), [2] Na2OAl2O3, or Na2Al2O4, pure sodium aluminate (anhydrous) is a white substance. Both a solution and a solid form of sodium aluminate are sold commercially.Other comparable compounds, often referred to as sodium aluminate, include Na5AlO4 and Na7Al3O8, which contain complex polymeric anions and Na17Al5O16 and NaAl11O17, which was originally wrongly thought to be -alumina, a phase of aluminum oxide.Aluminum chloride, sodium chloride, and water are produced when hydrogen chloride and sodium tetrahydroxoaluminate interact. Diluted hydrogen chloride in a solution form.

Learn more about coordination compound Refer: brainly.com/question/23159765

#SPJ4

The net charge at pH=7. The pKa values given in the table above will term is referred as neutral.

At pH = 7, the solution is considered neutral, which means that the concentration of H+ ions is equal to the concentration of OH- ions, i.e [H+] = [OH-] = 10^-7 M.

To estimate the net charge at pH = 7, you would need to know the pKa values of the acid and the species present in the solution.  It is important to note that the net charge at pH 7 will depend on the acid and species present in the solution, and the pKa values given for that specific acid. In a neutral solution, the pH is equal to 7, which means that the concentration of H+ ions is equal to the concentration of OH- ions. Since the pH is neutral, this means that the solution has no net charge. Neutral solutions contain equal concentrations of positive and negative ions, thus the net charge is zero.

To know more about pH please refer: https://brainly.com/question/16926229

#SPJ4

The mass % of carbon in dimethyl sulfoxide (C2H6SO) rounded to three significant figure is calculated as 30.718%.

Mass percent of a solution is defined as the ratio of the mass of solute that is present in solution, relative to the mass of solution as a whole. To calculate mass percent of an element in a compound, we divide mass of the element in 1 mole of the compound by the molar mass and then multiply the result by 100.

As we know molar mass of carbon is 12 g/mol and molar mass of dimethyl sulfoxide is 78.13 g/mol

Mass % of carbon (C2) in dimethyl sulfoxide (C2H6SO) = 2* (12/78.13) * 100

= 30.718%

To know more about mass percent, refer

https://brainly.com/question/26150306

#SPJ4

The three missing elements in the periodic table are gallium, germanium and scandium.

Gallium, germanium, and scandium have been all unknown in 1871, however, Mendeleev left areas for every and expected their atomic loads and different chemical properties. Within 15 years, the “lacking” factors have been discovered, conforming to the simple traits Mendeleev had recorded. Scientists in Japan suppose they have eventually created the elusive detail 113, one of the lacking gadgets at the periodic table of factors. Element 113 is an atom with 113 protons in its nucleus — a kind of depend that should be created inner a laboratory as it isn't always located evidently on Earth.

The elements are gallium, germanium and scandium.

To learn more about periodic table check the link below:

https://brainly.com/question/15987580

#SPJ4

Answer:

it is 1 mole of I is correct

A blend of dyes called a universal indicator gradually changes color throughout a pH range of 4 to 14. The color serves as a direct indicator of pH.

Thymol blue, methyl red, bromothymol blue, and phenolphthalein are the primary ingredients of a universal indicator in the form of a solution. Colors ranging from yellow to red denote an acidic solution, whereas colors ranging from blue to violet denote an alkaline solution and green denotes a neutral solution. Substances called indicators are those whose solutions change color as the pH changes. We refer to these as acid-base indicators. The conjugate base or acid versions of these typically weak acids or bases have various hues because of variations in their absorption spectra.

Learn more about solution here-

https://brainly.com/question/7932885

#SPJ4

The weight of the book in kilograms is 0.498Kg.

A body's bulk is an innate characteristic. It was widely believed to be related to the volume of matter in a physical body prior to the discovery of the atom and particle physics.

You can work on a level surface provided by the book.

will eventually add more weights. It is distinctive in its own way. The mass must be measured.

the account balance to 0 the scale with the book on it. Weigh the object down to the nearest gram (1 g). 498g In this experiment, all masses will be measured in kilograms. the books weigh 0.498 kg in kilograms.

Learn more about mass.

brainly.com/question/18064917

#SPJ4

The solubility of a compound in water is determined by the type of chemical bonds present in the compound and the polarity of the molecule. Thus option B is the correct answer.

Compounds that are polar and have hydrogen bonding capability are more likely to be soluble in water.

In this case, Propanol (CH3CH2CH2OH) has a polar -OH group, which makes it able to form hydrogen bonds with water molecules, and therefore it would be more soluble in water than the other two compounds.

The other two compounds, CH3CH2OH (Ethanol) and CH3OCH2CH3 (Dimethyl ether), also have polar groups, but propanol has the most polar -OH group which is why it would be the most soluble in water.

To learn more about Solubility,

https://brainly.com/question/28850265

#SPJ4

With 3.11 grams of sodium chloride we should start to make an aqueous solution of 50. 0 gm.

When water is used as a solvent then the solution is called the aqueous solution. Water is a good solvent which is naturally abundant and in chemistry, the word "solution" refers to the aqueous solution unless the solvent is specified. It is denoted by "aq".

Mass of aqueous solution = 50 gm

Mass percentage of sodium chloride = 6.213%

Let the mass of sodium chloride is N grams, then,

N = (50/100) × 6.213 gm

N = 0.5 × 6.213

N = 3.11 grams

To know more about sodium chloride, here

https://brainly.com/question/30021413

#SPJ4