Answer:
P V = N R T is the universal gas equation
If only pressure and volume are considered (the other factors are constant)
P1 V1 = P2 V2
So P2 = (V1 / V2) * P1
This is also known as Boyle's Law:
P V = constant
What is the process called when the ice reaches the coast breaks off to form icebergs that are then carried out to sea?
The process of breaking of ice from the edge of the glaciers and then carried out to sea is known as calving.
Calving of glaciers is usually accompanied by a loud cracking sound or booming sound.
A huge glacier or polar ice that has broken off and floated into the sea is what creates an iceberg. The iceberg is composed of fresh water, just like the glaciers or ice in the North Pole. Since freshwater is less thick than salty seawater, icebergs float in the water.
When a rift develops in a glacier's margin as a result of ice melting, wind or water erosion, or other factors that make the glacier unstable, the calving process begins. A block eventually separates from the land, forming an iceberg that crashes into the water.
To know more about icebergs:
https://brainly.com/question/11430987
#SPJ4
A toy car move around a loop-the-loop track. The loop i 0. 5 high. What i the minimum peed of the car at the top of the loop for it to tay on track?
Pleae work it!!
I found all the anwer are 1. 57m/ but it i
0. 78m/
The minimum speed of the car at the top of the loop for it to stay on track be 1.57 m/s.
What is speed?The speed of an item, which is a scalar quantity in everyday usage and kinematics, is the size of the change in that object's position over time or the size of the change in that object's position per unit of time.The speed at which an object's location changes in any direction.The distance traveled in relation to the time it took to travel that distance is how speed is defined.As a result, the fundamental unit of time and the basic unit of distance are combined to form the SI unit of speed. Thus, the metre per second (m/s) is the SI unit of speed.To learn more about speed refer to:
https://brainly.com/question/13943409
#SPJ4
How do scientists collect evidence about Earth's climate?
"Scientific evidence for warming of the climate system is unequivocal."
What evidence can be used to study the Earth's past climate?Organisms such as diatoms, forams, and coral) can obey useful climate proxies. Other proxies involve ice cores climate, tree rings, and sediment cores. Chemical deputy records include isotope ratios, elemental examination, biomarkers, and biogenic silica.
Climate analyzers use every possible direct and indirect compilation to study the full history of Earth's climate, ice cores drawn from Greenland, Antarctica, and tropical mountain glaciers appear that Earth's climate greets to changes in greenhouse gas levels.
So we can conclude that Climate change is most usually measured using the average surface temperature of the planet.
Learn more about the climate here: https://brainly.com/question/17922964
#SPJ1
2. A 1.0 kg roller coaster is at the top of a 25m hill, and has a velocity of 8 m/s.
a. Determine the velocity of the roller coaster when it is halfway down the hill, at height of 12.5 m. (Ignore Friction)
b. What is the velocity of the roller coaster at the bottom of the hill assuming a force due to friction of 3.0 N, and the length of the hill is 45.0 m.
SHOW ALL WORK!
The car's acceleration can be calculated as: a = v2/R = (18.0 m/s) 2/(12.0 m) = 27.0 m/s2. The conventional method can be used to determine net force: 13500 N is equal to Fnet = m•a = (500 kg)•(27.0 m/s2).
What happens to a roller coaster's speed as it climbs a hill?It may slow down or decelerate when traveling uphill or straight ahead. Roller coasters accelerate as they travel down hills due to the force of gravity dragging them downward.
How do roller coasters use math?Calculus and other fundamental mathematical concepts are used to calculate the maximum speed, the angles of ascent and descent, and the height necessary for the automobile to climb the next hill. The roller coaster's safety is further ensured by these calculations.
to know more about velocity here:
brainly.com/question/18084516
#SPJ1
How can we determine the change in internal energy of a system?
The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.
The energy contained inside a thermodynamic system is quantified as the quantity of energy required to get the system from its standard internal state to its current internal state of interest, accounting for energy gains and losses owing to changes in its internal state, including magnetization.
It eliminates the kinetic energy of motion and the potential energy of the system's overall location in relation to its surroundings and external force fields.
Learn more about internal energy to visit this link
https://brainly.com/question/11278589
#SPJ4
A ? is a distortion in a voltage waveform where the voltage quickly drops toward zero and then returns to the correct value.
"A notch is a distortion in a voltage waveform where the voltage quickly drops toward zero and then returns to the correct value."
In general, the primary overcurrent device is not considered to safeguard transformer secondary wires. Transformers with two windings are all isolation transformers.
A voltage waveform distortion known as notching is brought on by intense current bursts of very short duration. These distortions generally show up graphically as a notch in the waveform's time domain representation.
When current commutates from one phase to another during normal operation of power electronic devices, a sort of periodic waveform distortion called voltage notching is created. The most significant instance of voltage notching occurs in three-phase converters. The transition of the current from one phase to another causes the notches.
To know more about waveforms:
https://brainly.com/question/12274974
#SPJ4
At an amusement park there is a ride in which cylindrically shaped chambers spin around a central axis. People sit in seats facing the axis, their backs against the outer wall. At one instant the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back. What is the radius of a chamber
When the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back then the radius of a chamber is 8.5 meters.
The radius of the chamber can be calculated using the equation
F = mv²/r, where F is the force felt by the person, m is the mass of the person, v is the velocity of the chamber and r is the radius of the chamber. In this case, F is 545 N, m is 83 kg, and v is 3.0 m/s.
Plugging in these values, we get
r= mv²/F
r= 83×3²/545
r = 8.5 m.
Therefore, the radius of the chamber is 8.5 m.
Learn more about force:
https://brainly.com/question/25239010
#SPJ4
The motion of a particle is described by x= 10 sin2t + 8cos2t. Determine the period, amplitude and phase angle
Answer:
Explanation:
period is 2pi / B which is 2pi/8 which is 1/4 pi
amplitude is a which is 10
30 points!
Which option best describes a planet with the highest gravity?
a small, high mass planet
a large, low mass planet
a large, high mass planet
a small, low mass planet
Answer:
F = G M m / R^2 or g = F/ m = G M / R^2
(A) A small high mass planet obviously fits the first description.
in some places, hot water from underground can shoot up into the air through a hole in the ground. when this happens, the ground surrounding the water increases in temperature. what happens to the molecules in the ground when the temperature of the ground increases?
The energy of the molecules in the ground increases in the given case when the temperature increases.
Convection and conduction are two ways that the Earth's heat is released.
Conduction takes place when the transferring of heat takes place from something hot to something cold.
On the other hand, convection takes place when the transferring of heat takes place by the movement of hot gases or liquids like water, air, or magma to a cooler region.
Near the surface of the ground, the convection of heat water results in the hot springs and geysers to shoot up into the air through a hole in the ground.
To know more about temperature:
https://brainly.com/question/18271013
#SPJ4
Why are dynamic flexibility tests not used as often as static flexibility tests a dynamic flexibility tests involve m?
Dynamic flexibility tests are not used as often as static flexibility tests because dynamic flexibility tests involve movement, while static flexibility tests are stationary.
Dynamic flexibility tests are more difficult to perform and require more coordination, and they can be less reliable than static flexibility tests. Additionally, dynamic flexibility tests require more time and equipment to administer, making them less practical for most fitness assessment settings.
Also, dynamic flexibility tests are more specific and measure the ability to perform a specific movement, rather than measuring the general range of motion of a joint. This makes them more suitable for testing athletes and those who need to measure their ability to perform specific movements.
Learn more about Dynamic flexibility :
https://brainly.com/question/1234108
#SPJ4
A billiard ball moves with 5 kg⋅m/s of momentum and strikes three other billiard balls. What is the total momentum of the balls after the collision?
3 kg⋅m/s
4 kg⋅m/s
5 kg⋅m/s
6 kg⋅m/s
The momentum of the billiard balls after the collision is 3 Kgm/s.
What is Momentum?Simply multiplying the mass of an object by its velocity results in momentum. Additionally, because momentum has both magnitude and direction, it qualifies as a vector quantity.
The formula provides momentum in mathematics;
The other pool balls' velocities would be zero (0) m/s because they were at rest (not experiencing any motion). If we substitute the values, we get: Total forward motion is 3 kg/s.
As a result, the billiard balls' post-collision momentum is 3 Kgm/s.
Therefore, The momentum of the billiard balls after the collision is 3 Kgm/s.
To learn more about Momentum, refer to the link:
https://brainly.com/question/24030570
#SPJ1
Mess Me and You will have nonsense Explain how this riddle relates to mutation in DNA
Nonsense mutations are those point mutations in the DNA where stop codons will appear before the time they should appear.
What are nonsense mutations?At the time of transcribing from DNA to RNA, the template needs to have both start and stop codons for the transcription to occur correctly, but sometimes mutations can occur that do not allow the protein to be produced correctly. This mutation can be permanent which causes damage to the formation of proteins.Sometimes mutations can be beneficial, allowing evolution and helping organisms to be better formed for a new environment.
It is the type of mutation in which a termination codon occurs before the time it should be, instead of giving a codon with a certain amino acid. Which gives a much shorter protein than it should be, giving a non-functional protein.
To learn more about mutation visit: https://brainly.com/question/17130462
#SPJ1
Like the Kelvin scale, the Rankine scale is an absolute temperature scale: Absolute zero is zero degrees Rankine (0∘R). However, the units of this scale are the same size as those on the Fahrenheit scale (∘F) rather than the Celsius scale (∘C).
A) Given that water at standard pressure freezes at 0∘C, which corresponds to 32∘F, and that it boils at 100∘C, which corresponds to 212∘F, calculate the temperature difference ΔT in degrees Fahrenheit that corresponds to a temperature difference of 1 K on the Kelvin scale.
B) What is the numerical value of the triple-point temperature Ttriple of water on the Rankine scale?
The temperature difference of 1 K on the Kelvin scale is equivalent to the temperature difference of (5/9)°F on the Fahrenheit scale. Triple-point temperature of water is approximately 491 degrees Rankine.
The unit of scales on the Rankine scale is the same as those on the Fahrenheit scale. Hence, from the freezing point of water (0⁰C) to the boiling point of water(100⁰C) , Rankine scale is divided into 180 scales.
The absolute zero is zero degrees Rankine. In Celsius scale, absolute zero is −273 °C.
A). A unit scale on the Kelvin scale is the same size as a unit scale in the Celsius scale. Hence,
ΔT 1 K = ΔT 1°C
The ratio of Celsius and Fahrenheit scale is 5/9, therefore:
K/F = C/F = 5/9
Hence,
ΔT 1 K = ΔT (5/9)°F
B) Triple-point temperature of water is approximately 0 °C. Since zero degrees Rankine is equivalent to −273 °C, hence:
0 °C = 0 - (9/5)(-273) = 491 degrees Rankine.
Learn more about Rankine scale here:
https://brainly.com/question/13294139
#SPJ4
Eileen is holding a pillow with a mass of 0.30 kg when Stephanie decides she wants it and tries to pull it way from Eileen. If Stephanie pulls horizontally on the pillow with a force of 10.0 N and Eileen pulls with a horizontal force of 11.0 N, what is the magnitude of the net acceleration of the pillow
The magnitude of the net acceleration of the pillow is 3.333 m/s^2 .
How do you determine the magnitude of the net acceleration?To determine the magnitude of the net acceleration of the pillow, we can use Newton's Second Law of Motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration:
Fnet = ma
where
Fnet = net force acting on the pillow
m = mass of the pillow (0.30 kg)
a = acceleration of the pillow
Fnet = FStephanie - FEileen = 10 N - 11 N = -1 N
So, the net force acting on the pillow is -1N
Now, we can use Newton's Second law to find the acceleration of the pillow
a = Fnet/m = -1 N / 0.3 kg = -3.333 m/s^2
Therefore, the magnitude of the net acceleration of the pillow is 3.333 m/s^2 .
To know more about Acceleration visit :
brainly.com/question/12550364
#SPJ4
Which of the following most likely explains why Jupiter's interior releases so much heat?
A. Jupiter is gradually contracting in size.
B. tidal heating.
C. heat from radioactive decay.
D. a slow rate of nuclear fusion in Jupiter's core.
C. heat from radioactive decay.
Jupiter is a large gas giant and does not have a solid surface so the source of its heat is not from contraction or tidal heating.
Heat is generated from the radioactive decay of elements, such as uranium and thorium, in the interior of Jupiter which is the most likely explanation for the release of heat.
The heat released from the interior of Jupiter is believed to be generated from the radioactive decay of elements, such as uranium and thorium. These elements are naturally occurring, and their decay releases energy in the form of particles and radiation. This process produces the heat that is released from Jupiter's interior, which is why it is much hotter than the surrounding environment. The heat is also responsible for the hot spot that can be seen in Jupiter's atmosphere. It is estimated that the interior of Jupiter releases up to two and a half times more heat than it receives from the Sun. This process of radioactive decay is the most likely explanation for the release of such a large amount of heat from Jupiter's interior.
learn more about heat here
https://brainly.com/question/14515276
#SPJ4
A researcher observes hydrogen emitting photons of energy 1.89 eV. What are the quantum numbers of the two states involved in the transition that emits these photons?
The quantum numbers of the 2 states involved in the transition that emits these photons of energy 1.89 eV of hydrogen is n=3 to n=2
The hydrogen atom is the simplest atom in which an electron moves in the spherically symmetric Coulomb potential of the proton. The total energy of an atom in the center of the mass system can only have discrete values for the stationary states described by the quantum numbers.
Energy of the emitted photon, ΔE=1.89eV. The total energy of a hydrogen atom is given as, En=−13.6/n^2eV, Here, n is the principal quantum number.
An electron absorbs or emits radiation in the form of discrete energy, which equals the difference in energies of the final and initial state. Mathematically, ΔE=Ef−Ei. Here, Ef is the energy of the final state and Ei is the energy of the initial state.The difference in energy when an electron makes transition from n=3 to n=2. ΔE3→2= E3−E2=(−1.51eV)−(−3.4eV)= 1.89eV.
Since, ΔE=ΔE3→2. Therefore, the electron makes a transition from n=3 to n=2.
Learn more about energy transition, refer to the link: brainly.com/question/23892469
#SPJ4
What happens to the magnitude of the torque if the angle increases toward 90?
The magnitude of the torque will increase as the angle between the force and the line of action of the torque approaches 90 degrees.
Torque is a measure of the rotational force acting on an object and is defined as the product of the force and the distance from the axis of rotation to the point where the force is applied. The torque is also proportional to the sine of the angle between the force and the line of action of the torque.
When the angle between the force and the line of action of the torque is 0 degrees, the torque is zero, as the force is acting in the same direction as the line of action of the torque. As the angle increases, the torque increases and reaches its maximum value when the angle is 90 degrees, at this point the sine of the angle is 1, so the torque is at its maximum value.
In practical terms, if you imagine a door knob, when you push or pull the door knob closer to 90 degree angle with the door, it will be harder to open or close the door, than when you push or pull the door knob at a small angle.
To know more about Torque click below:
brainly.com/question/6855614#
#SPJ4
suggest how the thermal conductivity of a metal depends on its temperature
Answer:
With an increase in temperature, the electrical conductivity of a pure metal decreases. This implies that the thermal conductivity of the pure metal shows little variance with an increase in temperature. However, a sharp decrease is observed when temperatures approach 0K
The amplitude of pulse A is 20cm and that of pulse B is 10 Cm what is the maximum of the resultant pulse
Answer:
The maximum amplitude of the resultant pulse would be 30 cm.
Explanation:
The maximum amplitude of the resultant pulse would be 30 cm.
The maximum amplitude of the resultant pulse would be the sum of the amplitudes of pulse A and pulse B, which is
20 cm + 10 cm = 30 cm.
This is because the maximum amplitude of the resultant pulse would occur when the two pulses are in phase, meaning they are both at their highest point at the same time.
When the two pulses are out of phase, their amplitudes will cancel each other out to some degree, resulting in a lower overall amplitude.
To learn more about Pulse:-
https://brainly.com/question/27205915?referrer=searchResults
https://brainly.com/question/16001036?referrer=searchResults
If the amplitude of pulse A is 20cm and that of pulse B is 10 cm, the maximum of the resultant pulse is 30 cm.
What is amplitude?
A sound wave's amplitude measures the height of the wave. When a sound is made, the maximum displacement of the medium's vibrating particles from their mean position determines the amplitude of the sound wave. It is the separation between the wave's crest or trough and its mean location.
The phenomenon of constructive interference occurs when two waves superimpose on each other in the same phase, with the resultant wave's amplitude being equal to the sum of the separate waves' amplitudes and producing the maximum amount of light.
The amplitude of pulse A is 20cm.
The amplitude of pulse B is 10cm.
Hence, the maximum of the resultant pulse is = (20 cm + 10 cm) = 30 cm.
Learn more about amplitude here:
https://brainly.com/question/8662436
#SPJ2
How do you calculate torque of a shaft?
Divide the radius by the shear stress and the polar moment of inertia to find the shaft torque.
A device that measures shaft torque records the degree to which a shaft will twist in the presence of a specific amount of force. A shaft will twist less than one with a torque of 3 degrees than one with a torque of 5 degrees, and so on.
Does torque equate to rotation?The rotating equivalent of force is torque. So an object will rotate with an angular acceleration in response to a net torque. A torque must be described about the rotational axis since every rotational motion has an axis of rotation. A torque is an applied force that rotates an object about its axis.
To know more about shaft torque visit:-
https://brainly.com/question/12873980
#SPJ4
1. There are only two factors that affect your environment. (1 point)
O True
OFalse
2. Seasonal changes impact the environment. (1 point)
True
OFalse
3. Plants in a room can actually improve air quality. (1 point)
O True
OFalse
4. Scientists are not concerned with the human impact on the environment.
True
OFalse
5. Land environments are different than water environments. (1 point)
True
False
(1 point)
Seasonal changes impact the environment. is There are only two factors that affect your environment.
What is seasonal behavior?Seasonal affective disorder, a clinically diagnosed syndrome, is believed to represent the morbid extreme of a spectrum of seasonality. Two types of seasonality have been clinically described: one characterized by a winter pattern and a second by a summer pattern of depressive mood disturbance.
Does seasonal mean every year?Seasonality is a characteristic of a time series in which the data experiences regular and predictable changes that recur every calendar year. Any predictable fluctuation or pattern that recurs or repeats over a one-year period is said to be seasonal.
To know more about spectrum visit
https://brainly.com/question/6836691
#SPJ1
You are standing on a moving bus, facing forward. You suddenly fall backwards. You can imply from this that the bus's __.
You are standing on a moving bus, facing forward. You suddenly fall backward. You can imply from this that the bus's acceleration or speed has increased suddenly.
When the bus accelerates or speeds up suddenly, the inertia of your body causes you to fall backward. Inertia is the tendency of a body to resist changes in its state of motion. It is a basic principle of physics that states that an object in motion will remain in motion with the same speed and the same direction unless acted upon by an outside force. When the bus accelerates suddenly, the inertia of your body causes you to remain in the same position, while the bus moves forward. This results in you falling backward.
To know more about acceleration refer to the link brainly.com/question/2303856
#SPJ4
If researchers failed to take into account the effect of air resistance on the pitch, how would it impact their measurements of the efficiency of energy transfer from the arm to the baseball
The efficiency of energy transfer from the arm to the baseball would be lower than the actual efficiency, as there was a higher initial velocity at release.
In order to answer this question, we must look at the experimental design and assess how air resistance would affect the scientists' computations. The ball's velocity would be reduced as it moved from the mound to home plate, where the velocity was measured, due to air resistance.
Therefore, the measured velocity ought to be lower than the release velocity. As a result of the baseball's predicted energy being lower due to the lowered velocity, the efficiency of the energy transfer from the arm to the ball will also be lower.
To know more about baseball:
https://brainly.com/question/9562240
#SPJ4
Where the ungrounded conductors for a 225-ampere feeder are increased in size from 250 kcmil copper to 800 kcmil copper due to length, what is the minimum-size copper equipment grounding conductor required for the circuit?
The minimum-size copper equipment grounding conductor required for the circuit is 1/0 kcmil.
The NEC (National Electric Code) provides guidelines for the minimum size of equipment grounding conductors.The minimum size of the equipment grounding conductor is based on the ampacity of the feeder circuit.In this case, the ampacity of the feeder circuit is 225 amperes.The conductors for the feeder circuit have been increased in size from 250 kcmil to 800 kcmil due to the length of the circuit.According to the NEC (National Electric Code), the minimum size copper equipment grounding conductor required for a 225-ampere feeder circuit where the conductors have been increased in size from 250 kcmil to 800 kcmil due to length would be 1/0 kcmil.Learn more about conductors here:
https://brainly.com/question/492289
#SPJ4
The____of a conductor is defined as the diameter of the conductor in mils, squared.
The cross-sectional area of a conductor is defined as the diameter of the conductor in mils, squared.
What is conductor?
A conductor is a material or object that allows the flow of electric current. It is a material that has a large number of free electrons which can move freely between atoms, allowing for the current to flow through the material. Conductors can be either solid or liquid, and can be used to create electrical circuits and systems. Common conductors used in electrical systems include copper, aluminum, silver, and gold. These materials have high electrical conductivity, meaning they have low resistance and allow for large amounts of electric current to pass through them. Conductors are essential in many electronics and electrical devices, as they are responsible for carrying the electric current from one component to another.
To learn more about conductor
https://brainly.com/question/492289
#SPJ4
PLEASE ANSWER 100 POINTS!!
Juan drives his car around a curve at a speed of 17.0 m/s. Assume the curve can be approximated by an arc of a circle of radius 122.0 m. If a force of 7380 N is required to maintain the car’s circular motion, what is the car’s mass?
In ∑ F = m v^2r , both m and r are unknown but remain constant
What is the centripetal force that allows a car to move around a sharp curve in a roadway?
Any force, or set of forces, can accelerate an object radially or centripetally. A few examples include the tension in a tether ball's rope, the gravitational pull of the Earth on the Moon, the friction between roller skates and a rink's floor, the force of a banked road on a car, and the forces on a centrifuge's tube.
A centripetal force is any net force that produces uniform circular motion. The centripetal force and centripetal acceleration both point in the direction of the centre of curvature. Newton's second equation of motion states that net force equals mass times acceleration, or net F = m a.
The centripetal acceleration—a = a c—determines the rate of acceleration for uniform circular motion.
Consequently, the size of
To be learn more about produces refer to:
https://brainly.com/question/30141735?referrer=searchResults
#SPJ1
Why do we think tiny quantum ripples should have been present in the very early universe?
A) The shock wave of the Big Bang caused ripples that expanded outward with time.
B) The energy released when the strong force froze out of the GUT force caused shock waves that produced ripples in the universe.
C) Matter and antimatter particles that spontaneously formed from high-energy photons caused perturbations in the radiation field.
D) The annihilation of matter and antimatter particles caused tiny explosions that perturbed the radiation field.
E) Quantum mechanics requires that the energy fields at any point in space be continually fluctuating as a result of the uncertainty principle.
The correct answer of the following statement is:
E) The uncertainty principle of quantum mechanics dictates that energy fields anywhere at location in space must be constantly fluctuating.
What is Quantum mechanics?Quantum Mechanics is the branch of physics that deals with the behavior of matter and energy at the subatomic level. It explains the behavior of particles such as electrons, protons, and neutrons and how they interact with each other and with electromagnetic radiation. It also describes the behavior of matter on a macroscopic scale, such as the behavior of solids, liquids, and gases. Quantum Mechanics provides an understanding of the behavior of matter on the smallest scales, allowing us to understand the structure of the universe and its evolution over time.
To learn more about Quantum mechanics visit:
brainly.com/question/26095165
#SPJ1
if you reverse the poles of battery what will happen to the direction Of the lines?
Answer: The battery casing will explode
Explanation: Hydrogen gas will be released because of the heat which may cause an explosion.
Ginger was caring for her litter of puppies when the four curious pups spotted cat for the first time. Each of the four pups leaned their full of force in the board balanced between the puppies and the cat. How much force must Ginger apply to the other side to keep the puppies from knocking down the board? A. 8 N
B. 16 N
C. 32 N
On prevent the puppies from tearing down the board, Ginger must apply 32 N of force to the opposite side.
What is the value of total force?The total force acting on the system is equal to the acceleration of the center of mass times the system's total mass. When applied to an extended object, Newton's second law, F = ma, predicts the motion of a specific reference point for this object.
How much force is acting on an object overall?The vector sum of all forces acting on an object is known as the net force. In other words, the net force is the sum of all the forces, taking into mind that a force is a vector and that two forces that have the same magnitude but facing the opposite direction will cancel each other out.
To learn more about force visit:
brainly.com/question/13191643
#SPJ4