This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.
Let the following solutions to come up:
[H⁺] = 2.63x10⁻³ M
[H⁺] = 1.00x10⁻⁷ M
[H⁺] = 4.511x10⁻⁹ M
The first step, will be the calculation of the pH for each solution via:
pH = -log([H⁺])
So that they turn out to be:
pH = -log(2.63x10⁻³ M) = 2.580
pH = -log(1.00x10⁻⁷ M) = 7.000
pH = -log(4.511x10⁻⁹ M) = 8.3457
In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.
Thus, you can reproduce this methodology with the proton concentrations you are given.
Learn more:
https://brainly.com/question/23659500https://brainly.com/question/23428840assume you are performing the calibration step of experiment 8 and you begin with 80 g of water at 20 oc and 80 g of water at 80 oc. after adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment, you determine the temperature of the mixed portions of water to be 45 oc. what is the heat capacity of the calorimeter?
The heat capacity of the calorimeter is 133.76 J°/C.
A calorimeter is an apparatus employed when estimating the amount of heat required in a chemical reaction.
For the given calorimetric function:
the heat lost by the hot water = to the heat gained by the cold water and the calorimeter.These can be computed mathematically as:
[tex]\mathbf{m_wC_w\Delta \theta _w = m_cC_c\Delta \theta _c + C_{cal} \Delta_c}[/tex]
[tex]\mathbf{80 \ g\times 4.18 J/g^0 C \times (80-45)^0 \ C = 80 g \times 4.18\ J/g^0 \ \times (45- 20)^0 +C_{cal} \times (45- 20)^0 \ C}[/tex]
[tex]\mathbf{11704 \ J =8360 \ J+C_{cal} \times (25)^0 \ C}[/tex]
[tex]\mathbf{(11704 -8360) \ J= C_{cal} \times (25)^0 \ C}[/tex]
[tex]\mathbf{ C_{cal} = \dfrac{3344 \ J} { (25)^0 \ C}}[/tex]
[tex]\mathbf{ C_{cal} =133.76 \ J/^0 C}[/tex]
Therefore, the heat capacity of the calorimeter is 133.76 J°/C.
Learn more about calorimeter here:
https://brainly.com/question/10987564?referrer=searchResults
How many atoms of each element are in NaCI?
Enter your answer in the boxes:
|___| sodium
|___| chlorine
Answer:
well first you need 1 s then you need 1 ch
Explanation:
Describe the 3 dimensional NaCl lattice.
NaCl has a cubic unit cell, best thought of as a face-central cubic array of anions with an interpenetrating FCC action lattice or (vice versa). The cell looks the same whether you start with anions or cations on the corners. Each ion is 6 co-ordinates and has a local octahedral geometry.
NaCl lattice exhibit cubic unit cell. The face-centered cubic array of anions with an interpenetrating fcc cation lattice are seen in 3D structure. Each ion is 6-coordinate and has a local octahedral geometry.
What is sodium chloride?Sodium chloride is an ionic compound, formed from the sodium metal and chlorine atom. The ionic bond is formed by loss of one electron from sodium metal to the chlorine atom.
The lattice structure of all metals contains a pool of cations in the sea of mobile electrons. The electrons can be delocalized into the interstices and thus metals conduct electrically and thermally.
In the fcc lattice of NaCl, sodium atoms are arranged at the corners and Cl atoms are at the center of each cube face of the cell. They are assumed to touch along face diagonals.
Atoms are arranged at the corners of the cube with another atom at the cube center also hence there will 4 atoms one unit cell.
To find more fcc lattice, refer here:
https://brainly.com/question/21327238
#SPJ3
Arrange the events for the hydrolysis of amide bonds by chymotrypsin in their correct order.
1. attack by Ser 195 to give a tetrahedral intermediate
2. protonation by His 57 and release of the free C-terminus of the hydrolyzed bond
3. protonation by His 57 and release of the free N-terminus of the hydrolyzed bond
4. attack by water, leading to formation of a tetrahedral intermediate
5. binding of substrate to properly position the scissile bond for cleavage
a. 5, 1, 3, 4, 2
b. 5,1,2,4,3 5,
c. 1, 3, 2,4 5,
d. 2, 4, 3, 1
Answer:
The answer is A
Explanation:
the order 5,1,3,4,2
A sample of gold has a mass of 100 grams and a volume of 5cm^3, calculate the density by dividing the mass by volume
Answer:
20cm^2
Explanation:
Here, Density= Mass/ Volume
=100/5
= 20 cm^2
Describe how the suspects used the chemicals found at the crime scene to make the copper coins look silver.
The chemicals found at the crime scene although not mentioned must be Sodium zincate.
Discussion:
An interesting demonstration to show plating and alloys is the conversion of copper coins to silver look-alike coins.
A 'copper' coin when dipped into a solution of sodium zincate in contact with zinc. The coin is plated with zinc and appears silver in colour.
This is a common chemistry classroom trick.
Read more on plating:
https://brainly.com/question/20078989
how did JJ Thomson discovered the electron explain his plum pudding model of the atom
why the mixture of bromine and ethane is discoloured when left in the sun
Answer:
In the presence of UV light, ethane will react with bromine in a substitution reaction. UV light is the condition under which the reaction will occur so it is written above the arrow in the chemical equation. As the reaction proceeds, the intensity of the re-brown colour of the bromine water decreases.
Answer:
here ya go
Explanation:
combining bromine and ethane leads to a brown gas or liquid which is made of the elements. it is a gas at room temperature and does not affect human beings. there are many uses for bromine compounds but they are mainly used for the manufacturing of chlorine, fire retadants, water purification, graphy chemicals and pharmaceutcals. it is a naturally occurring element that can be found in animals such as sharks since they produce their own.
What is carbon? What does it do?
Answer:
Carbon is in carbon dioxide, which is a greenhouse gas that works to trap heat close to Earth. Carbon is the chemical backbone of life on Earth. Carbon compounds regulate the Earth's temperature, make up the food that sustains us, and provide energy that fuels our global economy. Most of Earth's carbon is stored in rocks and sediments. The rest is located in the ocean, atmosphere, and in living organisms
Explanation:
Hope it helps. Can you give me BRAINLIEST ANSWER. Thank you
methane is called an organic compound why
Answer:
Explanation:
1) Organic compounds always contain only p-block elements (Groups III-VII), at least one of which must be carbon. 2) Organic compounds almost always contain one or more C-H bonds. ... Thus, all bonds are typically covalent in organic compounds. Methane (CH4) is the prototypical organic molecule.
Methane contains carbon, forming covalent bonds, and is found in living organisms, making it an organic compound.
Methane (CH₄) is considered an organic compound due to its molecular structure and occurrence in living organisms. Organic compounds are primarily composed of carbon atoms covalently bonded to hydrogen and often other elements like oxygen, nitrogen, sulfur, and more.
Methane consists of one carbon atom bonded to four hydrogen atoms through covalent bonds. Carbon's unique ability to form stable covalent bonds with other elements, including itself, leads to the vast diversity of organic molecules found in living organisms.
Methane is a crucial component of natural gas and is produced by various biological and geological processes. It is present in the digestive systems of animals, formed during decomposition, and plays a role in carbon and energy cycles.
Its prevalence in living systems and its molecular structure classify methane as an organic compound, reflecting the foundational principles of organic chemistry.
To learn more about Organic compounds here
https://brainly.com/question/28682641
#SPJ3
The complete question is :
Methane is called an organic compound why?
HURRY for a BRAINLIST
Answer:
B
Explanation:
Answer:
answers
B
Explanation:
Explicaciónexplicacaca
Which ground-state atom has an electron configuration described by the following orbital diagram?.
Answer:
The energy of atomic orbitals increases as the principal quantum number, n, increases. In any atom with two or more electrons, the repulsion between the electrons makes energies of subshells with different values of I differ so that the energy of the orbitals increases within a shell in the order s< p <d<f. Figure 1 depicts how these two trends in increasing energy relate. The 1s orbital at the bottom of the diagram is the orbital with electrons of lowest energy. The energy increases as we move up to the 2s and then 2p, 3s, and 3p orbitals, showing that the increasing n value has more influence on energy than the increasing I value for small atoms. However, this pattern does not hold for larger atoms. The 3d orbital is higher in energy than the 4s orbital. Such overlaps continue to occur frequently as we move up the chart.
Which of these elements would have an electron affinity higher than that of oxygen?
Li
Ca
Ne
C
Be
Answer: Ne ( Neon )
Explanation: Lithium ( Li ), beryllium ( Be ), carbon ( C ), oxygen ( O ), and neon ( Ne ), are all in Period 2 in that order. Sodium ( Na ) is in Period 3. Since electron affinities decrease as you go down, Na would have a lower electron affinity level then Li but since electron affinities increase as you go across a period, only neon is farther right then oxygen ( O ), so it would be the only one element of this group that would have a higher electron affinity than that of oxygen.
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet.
On going down the group electronegativity decreases. On going along the period the electronegativity increases. So, Neon lies on the extreme right of Fluorine in the same period. Neon will have more electronegativity than oxygen.
Therefore, Neon is more electronegativity than fluorine.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ2
Which of these figures correctly illustrates the nature of the bonding of h2o?.
H2O is composed of two hydrogen atoms and one oxygen atom. The central oxygen atom is sp3 hybridized.
H2O is composed of two hydrogen atoms and one oxygen atom. The oxygen atom is bonded to the two hydrogen atoms at a dihedral angle of 104°. There are two lone pairs on the oxygen atom. The molecule has a bent geometry.
The structure of H2O is shown in the image attached to this answer. The central oxygen atom is sp3 hybridized and the shape of the molecule is based on a tetrahedron owing to its electron pair geometry.
Learn more: https://brainly.com/question/967776
Which of the following are required for plants to carry out photosynthesis?
Answer:
To perform photosynthesis, plants need three things: carbon dioxide, water, and sunlight
Answer please
.............................................................
This is not exactly a answer you can use but this is some information that you can use to find out the answer.
You can usually confirm the charge associate degree particle unremarkably has by the element's position on the periodic table: The alkali metals (the IA elements) lose one negatron to create a ion with a 1+ charge. The alkaline-earth metal metals (IIA elements) lose 2 electrons to create a 2+ ion.
Nonmetals type negative ions (anions). A range 7|chemical element|element|gas} atom should gain 3 electrons to possess an equivalent number of electrons as AN atom of the subsequent gas, neon. Thus, a gas atom can type AN ion with 3 additional electrons than protons and a charge of 3−.
explain why the pressure in a sealed container of gas decreases when heat is added to the system?
Answer:
the question is bogus
see explanation
Explanation:
explain why the pressure in a sealed container of gas decreases when heat is added to the system?
when you add heat to the gas molecules in a sealed container, the molecules move faster and the pressure INCREASES!!!
IT DOES NOT DECREASE
PV =nrT
IF THE O THEVOLUME IS FIXED (REIN A SEALED CONTAINER) AND THE NUMBER OF MOLES n is FIXED, THEN THE PRESSURE IS DIRECTLY PROPORTIONAL THE TEMPERATURE
THE GREATER T, THE GREATER P
Explain why some metals are extracted by heating their oxides with carbon, but some metals cannot be extracted in this way
Answer:
This happens because a metal is less reactive than carbon and it can be extracted from its oxides by heating with carbon. The carbon displaces metal from the compound and removes the oxygen from the oxide.
The measurable properties of a substance, such as vapor pressure and surface tension, occur due to the strength of
electrical forces between particles, as given by Coulomb's law
electrical forces between particles, as given by Newton's law
gravitational forces between particles, as given by Newton's law
O gravitational forces between particles, as given by Coulomb's law
Answer:
electrical forces between particles, as given by coulombs law.
Explanation:
Properties of a substance such as vapor pressure and surface tension depend on electrical forces between particles, as given by Coulomb's law.
The vapor pressure refers to how easily a liquid converts to gas while surface tension is the force that makes a liquid surface act as a stretched elastic skin.
Both vapor pressure and surface tension has a lot to do with the degree of polarity in a molecule. Usually, polar molecules have a low vapor pressure and high surface tension due to a high electrical forces between particles, as given by Coulomb's law.
Learn more: https://brainly.com/question/13440572
what is the mass of the product of 111.6g and 48g
Answer:
159.6
Explanation:
Due to the law of conservation of mass, mass is neither created nor destroyed in a chemical reaction. Hence, the mass of the product is the equivalent of the mass of the sum of the reactants.
How many atoms exist in 100.0 grams of lithium
To make hot cocoa on the trip, you will need to boil water. Construct an
explanation that describes how the lower air pressure in the mountains affects
this process.
i need an answer in under an hour pls help
Answer:
the water in the mountains will take longer to boil, because of the higher atmospheric pressu
which of the following properties of an electron in an atom can be expressed with quantum numbers? energy linear momentum angular momentum spin
The two properties of an electron which can be expressed with quantum numbers are angular momentum and spin.
The properties of an electron in an atom can be represented using four sets of quantum numbers. These four sets of quantum numbers include;
Principal quantum numberOrbital quantum numberMagnetic quantum numberSpin quantum numberAmong the options given in the question, the two properties of an electron which can be expressed with quantum numbers are angular momentum and spin.
Learn more: https://brainly.com/question/967776
The substances on the left side of a chemical equation are called the:
Select one:
a.
Ingredients
b.
Reactants
c.
Components
Please help me if you can. (I will give branliest to whoever answers first and if they have a reasonable answer.)
Cell types a classification
Answer:
It is possible to divide cells into two classifications: eukaryotic cells, which have a nucleus, and prokaryotic cells, which do not possess a nucleus but do contain a nucleoid area. In contrast to prokaryotes, which are one-celled creatures, eukaryotes may be either single-celled or multicellular in nature.
Explanation:
Hope it helps:)
¿Cuáles son las características que presentan las enzimas? Explica cada una
Answer:
Acelera las reacciones químicas.
Se requieren en cantidades mínimas.
Son muy específicos en su acción.
Se ven afectados por la temperatura.
Se ven afectados por el pH.
Algunos catalizan reacciones reversibles.
Algunos requieren coenzimas.
Son inhibidos por inhibidores.
Explanation:
Which type of dry-chemical fixed application method introduces a concentration of agent into a closed area
Actuating mechanism is the dry-chemical fixed application method which
introduces a concentration of agent into a closed area.
The actuating mechanism is commonly used in piping systems and
involves the transport of a control member in automatic or remote control
systems.
The closed system makes manual navigation very difficult which is why the
actuating mechanism in automatic systems are usually used to make it less
tedious and accurate.
Read more on https://brainly.com/question/19914723
HELP !!
Given the balanced chemical equation:
4 Fe + 3 O2 ----> 2 Fe2O3
How many moles of iron(III) oxide, Fe2O3 , will be produced if 12 moles of oxygen gas, O2 , are consumed
Answer:
8 moles of Fe2O3
Explanation:
You can use the mole ratio give. For every 3 O2 you produce 2 Fe2O3. With this you can find the number of moles. 12 O2 multiplied by the ratio 2/3 gives you 8 moles
HELP IM BEING TIMED: btw its science im just putting some thing random
Observe this image of two objects. What will happen when they are brought close together?
Answer:
I thinks something bad will happen but science can change so im not sure
Explanation:
Science changes because of diffrent thing like enviorment