Answers
Answer:
2,6–dimethylcyclohexanol
Explanation:
To name the compound given in the question above, we must first obtain the following:
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain.
3. Identify the substituent group attached to the compound.
4. Locate the position of the substituent group.
5. Combine the above to obtain the name of the compound.
Now, we shall determine the name IUPAC name of the compound. This can be obtained as follow:
1. The compound contains the –OH group. Thus, the compound is an alcohol.
2. The compound is a cyclic compound with six carbon forming the ring. Thus, the parent name of the compound is cyclohexane. Thus, the presence of the –OH group changes the parent name of the compound to cyclohexanol.
3. The substituent group attached to the compound is methyl (–CH₃)
NOTE: There are two –CH₃ groups attached to the compound.
4. The position of the 1st –CH₃ group is at carbon 2, while the 2nd is at carbon 6.
NOTE: Counting is done from the carbon bearing the functional group.
5. Therefore, the name of the compound is:
2,6–dimethylcyclohexanol
Related Questions
If you had 15 molecules of H2 and an unlimited supply of N2, how many
NH3 molecules can you make?
N2 + 3H2 --> 2NH3
Answers
Answer:
10 molecules of NH₃.
Explanation:
N₂ + 3H₂ --> 2NH₃
As the N₂ supply is unlimited, what we need to do to solve this problem is convert molecules of H₂ into molecules of NH₃. To do so we use the stoichiometric coefficients of the balanced reaction:
15 molecules H₂ * [tex]\frac{2moleculesNH_3}{3moleculesH_2}[/tex] = 10 molecules NH₃10 NH₃ molecules could be prepared from 15 molecules of H₂ and unlimited N₂.
How does publishing in scientific journals help ensure that science leads to
reliable results?
A. It allows results to be reviewed and reproduced by other
scientists.
B. It allows the public to decide if science is worthwhile.
C. It shows which experiments are the most popular with scientists.
D. It gives scientists a reason to do more experiments.
Answers
Answer:
A. it allows results to be reviewed and reproduced by other scientists.
At a pressure of 1.76 atm and 305 K, a certain gas has a volume of 350.0 mL. What will be the new volume of this gas under STP.
Answers
Answer:
hi
Explanation:
I'm just figuring this out
A mixture of He, Ar, and Xe has a total pressure of 2.40 atm. The partial pressure of He is 0.300 atm, and the partial pressure of Ar is 0.250 atm. What is the partial pressure of Xe?
Express your answer to three significant figures and include the appropriate units.
Answers
The total pressure is equal to the sum of all of the partial pressures, so 2.40 = 0.300 + 0.250 + pressure of Xe. Solving for the pressure of Xe, you get 1.85 atm.
The partial pressure of Xe in the mixture is 1.850 atm. (partial pressure of Xe = Total pressure - Partial pressure of He - Partial pressure of Ar = 1.850 atm).
To find the partial pressure of Xe, we need to subtract the partial pressures of He and Ar from the total pressure.
Total pressure = partial pressure of He + partial pressure of Ar + partial pressure of Xe
Given:
Total pressure = 2.40 atm
Partial pressure of He = 0.300 atm
Partial pressure of Ar = 0.250 atm
Let's solve for the partial pressure of Xe:
Partial pressure of Xe = Total pressure - Partial pressure of He - Partial pressure of Ar
Partial pressure of Xe = 2.40 atm - 0.300 atm - 0.250 atm
Partial pressure of Xe = 1.850 atm
Therefore, the partial pressure of Xe in the mixture is 1.850 atm.
To learn more about partial pressure of Xe here
https://brainly.com/question/34136076
#SPJ2
What is Carbonate ion?
Answers
Carbonate Ion is a polyatomic ion with formula of CO3(2-). Carbonate is a carbon oxoanion. It is a conjugate base of a hydrogencarbonate.
a carbonate is a salt of carbonic acid, characterized by the presence of the carbonate ion, a polyatomic ion with the formula of CO²⁻ ₃. The name may also refer to a carbonate ester, an organic compound containing the carbonate group C(O–)₂.
Answer:
[tex]{\huge\blue{\fbox{{࿐ᑕᗩᖇᗷOᑎᗩTᗴ IOᑎ࿐}}}}[/tex]
Explanation:✏The fizz in the club soda, the foaming effect in the washing soda are all due to carbonate ions. Carbonate is a salt of carbonic acid possessing the molecular formula CO32–. The main group of elements used as carbonates are alkali and alkaline earth metals.
Formula:✏ [tex]CO3 ^{2 - } [/tex]
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
Rank the following solutions from lowest to highest vapor pressure.
Rank from lowest to highest. To rank items as equivalent, overlap them.
10.0 g of potassium acetate KC2H3O2 in 100.0 mL of water
20.0 g of sucrose (C12H22O11) in 100.0 mL of water
20.0 g of glucose (C6H12O6) in 100.0 mL of water
Answers
Solution :
When non volatile solute is added to solvent, vapor pressure gets lowered.
Relative lowering in vapor pressure is given :
[tex]$\frac{P^0-P}{P^0}$[/tex] = [tex]$\text{mole fraction}$[/tex] of solute
[tex]$\frac{P^0-P}{P^0}=x_B$[/tex]
[tex]$P^0$[/tex] = vapor pressure of pure solvent
P = vapor pressure of solution
[tex]$x_B$[/tex] = mole fraction of solute
[tex]$x_B=\frac{n_B}{n_A+n_B}$[/tex]
[tex]$n_B $[/tex] = [tex]$\text{number of moles of solute}$[/tex]
[tex]$n_A$[/tex] = [tex]$\text{number of moles of solvent}$[/tex]
Number of moles [tex]$=\frac{\text{weight}}{\text{molecular weight}}$[/tex]
[tex]$\frac{P^0-P}{P^0}=\frac{w_B/M_B}{w_A/M_A+w_B/M_B}$[/tex]
[tex]$\approx \frac{w_B/M_B}{w_A/M_A}$[/tex]
1. For 10 g of [tex]$CH_3COOK$[/tex]
[tex]$CH_3COOK \rightarrow CH_3COO^- + K^+$[/tex]
Ions = 2
It will affect colligative property.
[tex]$\frac{P^0-P}{P^0} = \frac{i \times 10/98}{w_A/M_A}$[/tex]
Relative lowering in vapor pressure will be :
[tex]$=\frac{2 \times 10/98}{w_A/M_A}$[/tex]
[tex]$=\frac{0.20}{w_A/M_A}$[/tex]
2. For 20 g sucrose
Sucrose is non electrolyte, i = 1
[tex]$\frac{P^0-P}{P^0} = \frac{ 20/342}{w_A/M_A}$[/tex]
[tex]$=\frac{0.050}{w_A/M_A}$[/tex]
3. For 20 g of glucose.
Glucose is a non electrolyte, i = 1
[tex]$\frac{P^0-P}{P^0} = \frac{20/180}{w_A/M_A}$[/tex]
[tex]$=\frac{0.11}{w_A/M_A}$[/tex]
[tex]$w_A/M_A$[/tex] is same in all three solutions.
Hence, lowering in vapor pressure is maximum in [tex]$CH_3COOK$[/tex] and minimum is Sucrose.
Vapor pressure from lowest to highest.
10 g of [tex]$CH_3COOK$[/tex] < 20 g of glucose < 20 g of sucrose
The pressure exerted by vapor to the other gas is called vapor pressure.
The formula used to solve the question is as follows:-
[tex]\frac{P^o -P}{P^o}[/tex]
The water vapor depends on the following:-
Water pressureTemperature.After solving the equation, the correct sequence is as follows:-
[tex]CH_3COOK > GLUCOSE > SUCROSE[/tex]
For more information, refer to the link:-
https://brainly.com/question/22810476
24.3 2 An artifact classified as seeds, found in a site at Newlands Cross, Ireland, is found to have a 14C radioactivity of 0.103 counts per second per gram of carbon. If living carbon-containing objects have an activity of 0.255 counts per second per gram of carbon, estimate the age of the artifact?
The half-life of 14C is 5730 years.
______ years
Answers
Answer:
Age ≅ 7500 years
Explanation:
All radioactive decay is 1st order kinetics and described by the expression
A = A₀e^-kt => t = ln(A/A₀) / -k
k = 0.693 / t(half life) = (0.693 / 5730)yrs⁻¹ = 1.21 x 10⁻⁴ yrs⁻¹
t = Age = [ln(0.103/0.255) / - 1.21 x 10⁻⁴] yrs = 7500 years
At a certain temperature the rate of this reaction is first order in HI with a rate constant of 0.0632 s
2HI g = H2 g + I2 g
Suppose a vessel contains HI at a concentration of 1.28M. Calculate how long it takes for the concentration of HI to decrease to 17.0% of its initial value.
Answers
Answer:
[tex]28.037\ \text{s}[/tex]
Explanation:
[tex][A]_0[/tex] = Initial concentration = 1.28 M
[tex][A][/tex] = Final concentration = [tex]0.17[A]_0[/tex]
k = Rate constant = 0.0632 s
t = Time taken
For first order reaction we have the relation
[tex]kt=\ln\dfrac{[A]_0}{[A]}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{[A]}}{k}\\\Rightarrow t=\dfrac{\ln\dfrac{[A]_0}{0.17[A]_0}}{0.0632}\\\Rightarrow t=28.037\ \text{s}[/tex]
Time taken to reach the required concentration would be [tex]28.037\ \text{s}[/tex].
Consider the following data on some weak acids and weak bases:
acid base
name formula Ka name formula Kb
hydrocyanic acid HCN 4.9 x 10^-10 hydroxylamine HONH2 1.1 x 10^-1
hypochlorous acid HCIA 3.0 x 10^-18 ethylamine C2H5NH2 6.4 x 10^-4
Use this data to rank the following solutions in order of increasing pH. In other words, select a '' next to the solution that will have the lowest pH, a '' next to the solution that will have the next lowest pH, and so on.
a. 0.1 M HONH3Br
b. 0.1 M NaNO3
c. 0.1 M C2H5NH3Cl
d. 0.1 M NaF
Answers
Answer:
a < c < b < d
Explanation:
The weak acid with the lowest pKa will be the most acidic. In the other way, the conjugate base which the acid is weakest will be strongest.
The weak base with the lowest pKb will be the most basic. And the conjugate base of the weakest base will be a strongest acid.
Using the values:
Ka HCN = 4.9x10⁻¹⁰
Kb HONH2 = 1.1x10⁻⁸
Ka HClA 3.0x10⁻⁸
Kb C2H5NH2 = 6.4x10⁻⁴
The NaNO3 is the conjugate base of a strong acid as HNO3. That means its solutions are almost neutral
The HONH3Br is the conjugate acid of a weak base. Its solutions will be acidics
C2H5NH3Cl is the conjugate acid of a weak base as ethylamine, its solutions will be acidic.
As ethylamine has a lower pkb than hydroxylamine, the conjugate acid of hydroxylamine will be more acidic.
NaF is the conjugate base of a weak acid as HF. Its solutions will be basics
The order in increasing pH is:
HONH3Br < C2H5NH3Cl < NaNO3 < NaF
a < c < b < dTerry, a student, performs a titration. He completes these steps as part of his titration procedure: 1. He cleans and rinses a burette with standardized base. 2. He fills the burette with standardized base solution. 3. He reads and records the initial burette volume. 4. He adds a base from the burette to an acid. 5. He observes a color change in the Erlenmeyer flask. 6. He stops the addition of base from the burette. 7. He reads and records the final burette volume. Which steps will provide information needed to calculate the volume of base needed to reach the equivalence point? A. 1 and 6 B. 3 and 7 C. 3, 4, and 6 D. 1, 2, and 7
Answers
Answer:
D
Explanation:
D is the answer because 2 is needed to know
Answer:
B) 3 and 7
Explanation:
i just took the test
Soil comes in different colors.
Answers
Answer: yes they come in different colors.
Explanation:
Most shades of soil is mostly black,brown,red,gray,and white the color of soil and other properties including texture, structure, and consistency are used to distinguish and identify soil.
Will give brainliest
In an experiment, the molar mass of the compound was determined to be 228.276 g/mol. What is the molecular formula of the compound?
Answers
Work:
Match the element with its oxidation number (charge).
1. +1 O
2. -1 Ca
3. -3 Si
4. -2 Al
5. +2 N
6. +3 Na
7. +/- 4 F
Answers
Answer:
The answer is in the problem
Explanation:
As general rule of number of oxygen is -2:
O → -2
Alkali metals (Li, Na, K) are always +1
Na → +1
Alkali earth methals (Be, Mg, Ca...) are always +2
Ca → +2
The halogen group (F, Cl, Br...) is always -1
F → -1
The oxidation number of Si (+/- 4)
Aluminium is, usually +3
And to complete the octet rule in nitrogen, 3 electrons are required. That means:
N → -3
How many liters would you need to make a 0.8 M solution with 20 grams of lithium chloride?
Answers
Answer:
0.5875L
Explanation:
concentration = mole/ volume
n(LiCl) = 20 / (7 + 35.5) = 0.47 mol
volume = mole / conc.
volume = 0.47 /0.8
= 0.5875 dm³ = 0.5875L
What is one benefit that nuclear power plants currently provide for our environment?
O A. They provide energy without increasing carbon dioxide emissions.
O B. They provide energy without increasing nuclear waste.
C. They provide energy while increasing natural gas pollution.
O D. They provide energy while increasing biomass by-products.
Answers
Explanation:
Nuclear power plants deliver electricity 24 hours a day, 7 days a week, irrespective of weather and seasons. As well as reducing greenhouse gas emissions, nuclear generation helps reduce air pollution
Answer:
D
Explanation:
Just did the test
CH3CH2OH can interact with
other like molecules through ___?
Answers
Answer: dispersion forces, dipole-dipole and hydrogen bonds
Explanation:
Consider pure water separated from an aqueous sugar solution by a semipermeable membrane, which allows water to pass freely but not sugar. After some time has passed, the concentration of sugar solution: a. will have decreased b. will be the same on both sides of the membrane c. might have increased or decreased depending on other factors d. will not have changed e. will have increased
Answers
Answer:
it will be the same on both sides of the membrane
When the pure water is separated from the aqueous sugar solution when the sugar cannot pass through the semipermeable membrane. So the water moves through the membrane to the sugar solution. Therefore, the concentration of sugar solution will be decreased.
What is osmosis?Osmosis can be described as the spontaneous net movement or diffusion of solvent molecules through a permeable membrane from a region of lower solute concentration to a higher solute concentration in a direction that tends to balance the solute concentrations on both sides.
A physical process in which any solvent moves across a selectively permeable membrane separating two solutions of different concentrations.
Osmotic pressure can be described as the external pressure needed to be applied so that there is no net movement of a solvent across the membrane. Osmotic pressure can be defined as a colligative property because it depends on the molar concentration of the solute but not on its identity.
Therefore, option (A) is correct.
Learn more about osmosis, here:
https://brainly.com/question/1799974
#SPJ2
i need help with number 3
(THANKS FOR HELPING)
(I WILL BRAINLEST FORGOT HOW TO SPELL IT AND AGAIN THANKS FOR HELPING)
Answers
Answer:
Gymnosperm and Angiosperms both are plant groups but Gymnosperm is just very large leaves that come out of the ground and Angiosperms have flowers. Gymnosperm produce seeds in pine cones for example. Some plants in the Gymnosperm group of plants are pines. They produce naked seeds which means that they aren't protected by a ovary (Fruit like an apple) to help them get planted. Angiosperms have seeds that come out of their flowers and are called covered seeds. When the plant is about to die, it's seeds fall out and either float away and grow later of fall where the plant is. Also, insects carry them places too.
Hope this helps.
Cuo
+ H2 → → Cu + + H20
colorless
water
black
powder
reddish
solid
gas
vapor
Answers
Explanation:
because there is 2 hydrogen atoms in the reactions side of the equation (you can tell because the H has a 2 in the subscript) you have to have 2 hydrogen atoms in the reactants side to help balance out the equation. and since the copper and oxygen atoms are already balanced there is no coefficient needed.
Which of the following accurately describes the function of the muscular
system?
O A. To prevent and fight disease
B. To provide support for the body
C. To get rid of wastes and excess water
D. To allow the body to move
Answers
PLEASE HELP ME classify this reaction:
your options are
1. synthesis
2. decomposition
3. combustion
4. single replacement
5. double replacement
explain your answer for brainliest
Answers
FeCI2 + Na2CO3 = FeCO3 + NaCI Balance this equation please
No links
Answers
FeCl2 + Na2CO3 = FeCO3 + 2NaCl
The object shown is made of glass. What is it called?
Answers
Answer: prism
Explanation: A prism is a polyhedron, with two parallel faces called bases. The other faces are always parallelograms. The prism is named by the shape of its base.
The mass of an atom of element x is equivalent to the total mass of 7 hydrogen atoms
Answers
Answer: I'm not sure what your question is but i'll answer as best as I can.
Explanation:
Since X is equal to 7 H and we know that H is equal to 1.008, we can just do 7x1.008 = 7.056 g. I hope i helped and please clarify more in the future.
The atomic mass of an element is given by the sum of the mass of protons and neutrons. The element X is lithium as it has a mass of 6.941 u.
What is atomic mass?Atomic mass is the sum of the masses of the isotopes of that element and is given by adding the masses of the number of protons and neutrons of the elemental atom.
The atomic mass of one hydrogen atom is 1.008, so seven hydrogens will be, 7 x 1.008 = 7.056 g. Now, from the periodic table, it can be seen that an atomic mass of 7.056 g is closest to the atomic mass of a lithium atom (6.941 u).
From the mass, it can be said that seven hydrogen atom has an equivalent mass as that of one lithium atom in the periodic table. The lithium atom has atomic number 3 and an atomic mass of 6.941 g/mol.
Therefore, element X is lithium.
Learn more about atomic mass here:
https://brainly.com/question/17067547
#SPJ5
How many liters of 3.6 M solution can be made using 110 grams of
lithium bromide (LiBr)?
Answers
Answer:
0.2878 liters
Explanation:
It is possible to make 0.2878 liters of 4 M solution of lithium bromide using 100 grams of the compound.
PLZ HELP "NO LINKS"
A vessel of volume 22.4 dm3 contains 2.0 mol H2(g) and 1.0 mol N2(g) at 273.15 K.
(a) Calculate the mole fractions of each component.
H2:
N2:
(b) Calculate the partial pressures of each component.
H2:
N2:
(c) Calculate the total pressure.
Thanks!
Answers
Answer: (a) Mole fraction of [tex]H_{2}[/tex] is 0.66.
Mole fraction of [tex]N_{2}[/tex] is 0.33
(b) The partial pressure of [tex]H_{2}[/tex] is 1.98 atm.
The partial pressure of [tex]N_{2}[/tex] is 0.99 atm.
(c) The total pressure is 3.0 atm
Explanation:
Given: Volume = [tex]22.4 dm^{3}[/tex] (1 [tex]dm^{3}[/tex] = 1 L) = 22.4 L
Moles of [tex]H_{2}[/tex] = 2.0 mol
Moles of [tex]N_{2}[/tex] = 1.0 mol
Total moles = (2.0 + 1.0) mol = 3.0 mol
Temperature = 273.15 K
Now, using ideal gas equation the total pressure is calculated as follows.[tex]PV = nRT\\[/tex]
where,
P = pressure
V = volume
n = number of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\P \times 22.4 L = 3.0 mol \times 0.0821 L atm/mol K \times 273.15 K\\P = 3.0 atm[/tex]
The mole fractions of each component:The mole fraction of [tex]H_{2}[/tex] is calculated as follows.
[tex]Mole fraction = \frac{moles of H_{2}}{moles of H_{2} + moles of N_{2}}\\= \frac{2.0 mol}{(2.0 + 1.0) mol}\\= 0.66[/tex]
The mole fraction of [tex]N_{2}[/tex] is as follows.
[tex]Mole fraction = \frac{moles of N_{2}}{moles of H_{2} + moles of N_{2}}\\= \frac{1.0 mol}{(2.0 + 1.0) mol}\\= 0.33[/tex]
The partial pressures of each component:Partial pressure of [tex]H_{2}[/tex] are as follows.
[tex]P_{H_{2}} = P_{total} \times mole fraction of H_{2}\\= 3.0 atm \times 0.66\\= 1.98 atm[/tex]
Partial pressure of [tex]N_{2}[/tex] are as follows.
[tex]P_{N_{2}} = P_{total} \times mola fraction of N_{2}\\= 3.0 atm \times 0.33\\= 0.99 atm[/tex]
If the mass defect for a radionuclide is –8.7839×10-30 kg, what's the binding energy per atom?
Question 7 options:
A)
–7.8944×10-13 J/atom
B)
–4.76×1011 J/atom
C)
–7.8944×10-13 kJ/atom
D)
7.8944×10-13 J/atom
Answers
Answer:
A) –7.8944×10-13 J/atom
Explanation:
Mass defect of a radionuclide (m)
[tex]=-8.7839[/tex]×[tex]10^{-30} kg[/tex]
Formula for binding energy
[tex]E=mc^{2}[/tex]
[tex]=(-8.7839x10^{-30} kg)(3x10^{8} m/s)^{2}[/tex]
[tex]E=-7.8944x10^{-13} J/atom[/tex]
If the mass defect for a radionuclide is – 8.7839 × 10⁻³° kg, the binding energy per atom will be –7.8944 × 10⁻¹³ J/atom. The correct option is A.
What is radionuclide?A radionuclide is an unstable nuclide because it contains so much charge. The excess energy is used by the gamma radiation by the nucleus, the electron uses energy to move to another orbital.
Radionuclides are particles that are used to scanning or monitor the radioactive chemicals that are in the body due to swallowing or inhaling.
The binding energy per atom can be calculated by the formula
The mass of defect of a radionuclide (m) is – 8.7839 × 10⁻³° kg
E = mc²
E = – 8.7839 × 10⁻³° x 3 x 10⁸ m/s
E = –7.8944 × 10⁻¹³ J/atom.
Thus, the correct option is A. –7.8944×10-13 J/atom.
To learn more about radionuclides, refer to the link:
https://brainly.com/question/14605156
#SPJ2
Which of these statements does not describe electricity?
A. Lightning is electricity that has built up in the air and travels to the Earth.
B. Electricity cools down devices as it travels through them.
C. Electricity will naturally follow the path of least resistance.
D. Electricity is negatively charged and is attracted to positive charges.
Answers
Answer:
answer is B. Electricity cools down devices as it travels through them
Explanation
But Are Punnett square percentages always correct?
Answers
Answer:
yes
Explanation:
cuz is a square and if all angles are equal of a square then it is correct
Λλ(Lamda) Represents what??
Answers
Answer:
λ Represents:-
one wavelength of electromagnetic radiationthe decay constant in radioactivityfunction expressions in the lambda calculusa general eigenvalue in linear algebrathe expected number of occurrences in a Poisson distribution in probabilitythe arrival rate in queueing theorythe failure rate in reliability engineeringthe Lagrange multiplier in mathematical optimization, known as the shadow price in economicsthe Lebesgue measure denotes the volume or measure of a Lebesgue measurable setlongitude in geodesylinear densityecliptic longitude in astronomythe Liouville function in number theorythe Carmichael function in number theorythe empty string in formal grammara formal system in mathematical logicthermal conductivitythe Lorentz transformation-TheUnknownScientist