what is the ka of the acid ha given that a 1.20 m solution of the acid has a ph of 0.20? the equation described by the ka value is ha(aq) h2o(l)⇌a−(aq) h3o (aq)TWO SIGNIFICANT FIGURES PLEASE

Maintaining a high pH level (pH > 8) in treated drinking water that is stored in open-air reservoirs before distribution can be a challenging task.

Factors such as temperature, sunlight exposure, and the presence of contaminants can all affect the pH level of the water. Additionally, the water's alkalinity and the type of treatment used can also impact pH levels.

However, several techniques such as adding chemicals or using pH control systems can help to maintain a consistent pH level in the water before distribution.

Overall, while it may require extra effort, maintaining a high pH level in treated drinking water stored in open-air reservoirs is achievable with proper management and monitoring.

To learn more about pH, refer below:

https://brainly.com/question/2288405

#SPJ11

Based on the information above, option (c) CH3N=NCH3, which contains a conjugated system, is more likely to have the largest molar absorptivity (€) among the given options.

The molar absorptivity (€) is a measure of how strongly a compound absorbs light at a particular wavelength. It is influenced by various factors, including the molecular structure and functional groups present in the compound. In general, compounds with extended conjugation and aromatic systems tend to have higher molar absorptivities. Based on this information, let's evaluate the given options:

(a) C6H13CH=CH2:

This compound is a linear alkene and does not possess an extended conjugated system or aromaticity. Therefore, it is unlikely to have a large molar absorptivity.

(b) CH3(C=O)H:

This compound is an aldehyde. While it contains a carbonyl group, it does not have an extended conjugated system or aromaticity. Hence, its molar absorptivity is expected to be relatively low.

(c) CH3N=NCH3:

This compound is dimethyl diazene. It contains a diazenyl functional group, which exhibits conjugation between the nitrogen atoms. The presence of this conjugated system suggests that it may have a higher molar absorptivity compared to the previous options.

(d) C2H5ONO2:

This compound is ethyl nitrite. It does not possess an extended conjugated system or aromaticity, similar to option (a) and (b). Therefore, its molar absorptivity is expected to be relatively low.

To know more about wavelength visit:

brainly.com/question/31143857

#SPJ11

Here are the constitutional isomers of C8H10 that contain an aromatic ring:

1. Benzene:

    ```

           H   H

      H--C---C--H

            |   |

      H--C---C--H

            |   |

      H--C---C--H

            |   |

         H   H

     ```

2. Toluene:

    ```

           H   H

      H--C---C--H

            |   |

      H--C---C--H

            |   |

      H--C---C--CH3

            |

           H

    ```

3. Ethylbenzene:

    ```

           H   H

      H--C---C--CH2CH3

            |     |

      H--C---C--H

            |     |

      H--C---C--H

           |     |

          H   H

    ```

Note: These are the three constitutional isomers of C8H10 that contain an aromatic ring.

To know more about isomers refer here

https://brainly.com/question/31987323#

#SPJ11

The substance that has a higher density in liquid form than solid is water, which is why bodies of water tend to have warmer water on top and colder water at the bottom.

When most substances solidify, their molecules come closer together, making the solid more dense than the liquid form. However, water molecules have a unique arrangement in solid form (ice) where they form a lattice structure with spaces in between. This makes ice less dense than liquid water, causing it to float. The density of liquid water is highest at 4 degrees Celsius.

Water's unique property is due to its hydrogen bonding. When water freezes, its molecules arrange themselves into a hexagonal pattern, creating more space between the molecules. This results in a lower density in its solid state (ice) compared to its liquid state.

To know more about solid visit:

https://brainly.com/question/16799831

#SPJ11

Based on the chemical reaction between NaOH and HCl, we can expect the pH to increase as NaOH is added to the HCl solution.

This is because NaOH is a strong base and HCl is a strong acid, so when they react, they neutralize each other and form water and a salt. The salt formed in this reaction is typically neutral and does not contribute to the acidity or basicity of the solution. As more NaOH is added, it will continue to react with the remaining HCl until all of the HCl has been neutralized, which will result in a pH close to 7, indicating a neutral solution.

It is important to note that the rate at which the pH changes will depend on the concentration of both the NaOH and HCl solutions.

To know more about chemical reaction visit:-

https://brainly.com/question/22817140

#SPJ11

Nitrogen makes up approximately 78% of the Earth's atmosphere by volume and more than 10% of its mass. The correct option is E.

Water vapor, argon, helium, and hydrogen each make up less than 1% of the atmosphere by volume and therefore contribute less than 10% to its mass. Nitrogen makes up approximately 78% of the Earth's atmosphere by volume and more than 10% of its mass.

Nitrogen makes up more than 10% of the mass of the atmosphere. In fact, nitrogen is the most abundant gas in the atmosphere, constituting approximately 78% of its total mass.

To know more about Nitrogen visit:-

https://brainly.com/question/16711904

#SPJ11

Introduced in the 1950s as a rodenticide, warfarin effectively controlled rat populations by acting as an anticoagulant, disrupting blood clotting and causing internal bleeding.

Warfarin played a significant role in the development of pesticide-resistant rats.However, as the use of warfarin became widespread, it exerted evolutionary pressure on rat populations.

Rats with genetic mutations that conferred resistance to warfarin's anticoagulant effects had a survival advantage, allowing them to reproduce and pass on the resistance genes to their offspring. Over time, the proportion of resistant rats within the population increased. This resistance is primarily due to changes in the gene coding for the vitamin K epoxide reductase enzyme, which is targeted by warfarin. The mutations cause reduced sensitivity to the anticoagulant effect, allowing the rats to survive exposure.

In response to the emergence of warfarin-resistant rats, newer rodenticides have been developed, but resistance issues still persist. The development of pesticide-resistant rats highlights the importance of responsible and sustainable pest control strategies, as well as continued research and innovation in the field to combat resistance.

Learn more about warfarin here:

https://brainly.com/question/11295262

#SPJ11

The pOH of water at 0°C is 7.0. The answer is (a). To find the pOH of water at 0°C, we need to use the relationship between the pH and pOH of a solution, which is pH + pOH = 14.

Since the pH of pure water at 0°C is 7.0 (neutral), we can calculate the pOH as follows:

pH + pOH = 14
7.0 + pOH = 14
pOH = 14 - 7.0
pOH = 7.0

Therefore, the pOH of water at 0°C is 7.0. The answer is (a).

To know about water :

https://brainly.com/question/28465561

#SPJ11

(d) none of these. After a single Edman degradation of the tetrapeptide Gly-Tyr-Ser, the resulting peptide is **Gly**.

Edman degradation is a process used to sequentially remove amino acids from the N-terminus of a peptide. In this case, the first amino acid to be removed from the N-terminus of the tetrapeptide Gly-Tyr-Ser is Glycine (Gly). Therefore, the resulting peptide after the Edman degradation would be Gly.

Hence, the correct answer is **a. Gly-Phe**

Learn more about Glycine here:

https://brainly.com/question/29029864

#SPJ11

The equilibrium constant for this reaction is denoted as Ka. The value of Ka for formic acid is 1.77 x 10^-4 at 25°C.
c) 1.75 M solution of formic acid at 25°C has a percent ionization of approximately 66%.

The percent ionization of a weak acid is the ratio of the concentration of the dissociated acid to the initial concentration of the acid, multiplied by 100. It is represented by the formula: % Ionization = (concentration of H+ ions / initial concentration of acid) x 100
To determine the percent ionization of formic acid, we need to first calculate the concentration of H+ ions produced by the dissociation of the acid. The dissociation of formic acid can be represented by the equation:
HCOOH ⇌ H+ + HCOO-.

Percent ionization is the percentage of the acid molecules that dissociate into ions in a solution. To find the percent ionization for formic acid, we need the ionization constant (Ka) value. For formic acid, Ka = 1.8 x 10^-4 at 25°C. We can use the following formula to determine the percent ionization: Percent Ionization = ([H+]/[HA_initial]) x 100
where [H+] is the concentration of H+ ions, and [HA_initial] is the initial concentration of the acid.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

The commercial applications for polymers are vast due to their unique properties. One such application is in the production of packaging materials.

Polymers are lightweight, durable, and can be molded into various shapes and sizes, making them ideal for packaging goods for transportation and storage. Another application is in the production of medical devices, such as catheters and implants. Polymers can be biocompatible, flexible, and resistant to degradation, making them ideal for use in the human body. Additionally, polymers can be used in the production of textiles, adhesives, and coatings, among other products.

Overall, the diverse properties of polymers make them a valuable resource for various industries. Polymers, due to their versatile properties, have numerous commercial applications. For example, their lightweight, durability, and resistance to chemicals make them ideal for packaging materials in the food and beverage industry. Their electrical insulating properties enable their use in electronics, such as circuit boards and insulation for wires. Additionally, polymers with high tensile strength and elasticity can be used in automotive and aerospace industries for structural components and fuel-efficient parts. Finally, biodegradable polymers are gaining popularity in sustainable product development, offering eco-friendly alternatives to traditional plastic materials. Overall, polymers' diverse properties contribute to their widespread adoption across various industries.

To know about polymers:

https://brainly.com/question/1443134

#SPJ11

[tex]\frac{1}{16}[/tex] or 6.25%

Half-life describes how long it takes for half of a reactant to react.

First-Order Reactions

The question describes the reaction as first-order. In first-order reactions, half-lives are not dependent on concentration. This means that the half-life remains constant throughout the entire reaction. The equation for first-order half-life is:

In this equation, t is the length of the half-life and k is the rate constant. As you can see, concentration is not a variable in half-life

Half-life

After each half-life, 50% of the reactant forms the product. This means that 50% of the reactant is gone after 1 half-life. So, starting with 100%, we can divide by 2, 4 times.

In fraction form, 6.25% = 1/16. So, after 4 half-lives 1/16th of the reactant remains.

The molar solubility of BaF₂ is 0.0021 M. The molar solubility of a compound can be determined using its Ksp value.

Ksp is the solubility product constant, which represents the equilibrium constant for the dissolution of a sparingly soluble compound. In the case of BaF₂, the Ksp value is 1.7*10⁻⁶.

To determine the molar solubility of BaF₂, we first write out the balanced equation for its dissolution:
BaF₂(s) ⇌ Ba²⁺(aq) + 2F⁻(aq)

The Ksp expression for this equation is:
Ksp = [Ba²⁺][F⁻]²

We can use this equation to solve for the molar solubility of BaF₂. Let x be the molar solubility of BaF₂. Then, we have:
Ksp = x(2x)² = 4x³
1.7*10⁻⁶ = 4x³
Therefore,
x = 0.0021 M

Therefore, the molar solubility of BaF₂ is 0.0021 M. This means that at equilibrium, 0.0021 moles of BaF₂ will dissolve in one liter of water.

Learn more about molar solubility here:

https://brainly.com/question/28170449

#SPJ11

The volume of 6.00 M NaOH required to obtain 2.50 moles of the solute is 0.417 L (or 417 mL). the 6.00 M NaOH solution would be required to obtain 2.50 moles of the solute.

To calculate the volume of a solution, we can use the formula:

Volume (L) = Moles ÷ Concentration (M)

Given that the moles of the solute (NaOH) is 2.50 and the concentration of the solution is 6.00 M, we can substitute these values into the formula:

Volume (L) = 2.50 moles ÷ 6.00 M = 0.417 L

This means that 0.417 liters (or 417 mL) of the 6.00 M NaOH solution would be required to obtain 2.50 moles of the solute.

learn more about moles here:

https://brainly.com/question/30885025

#SPJ11

The rate of the reaction when [A] is 0.035 M and [B] is 0.070 M is approximately 0.0591 M/s.

To determine the rate of the reaction when [A] is 0.035 M and [B] is 0.070 M, we can use the initial rate data from the given experiments to calculate the rate constant.The rate of a chemical reaction is typically expressed as the change in concentration of a reactant or product per unit time. In this case, we will focus on the initial rate of the reaction, as indicated in the table.From the given data, we can observe that Experiment 1 has [A] = 0.060 M, [B] = 0.030 M, and an initial rate of 0.0744 M/s.According to the rate law for the given reaction, which can be expressed as rate = k[A]^x[B]^y, the rate is directly proportional to the concentrations of A and B.By comparing Experiments 1 and 2, we can determine the order of the reaction with respect to A:

(0.0744 M/s) / (0.00828 M/s) = (0.060 M)^x / (0.020 M)^x

9 = 3^x

x = 2

By comparing Experiments 1 and 3, we can determine the order of the reaction with respect to B:

(0.0744 M/s) / (0.0248 M/s) = (0.030 M)^y / (0.090 M)^y

3 = 1/3^y

y = 1

The overall order of the reaction is the sum of the individual orders:

Overall order = x + y = 2 + 1 = 3

Now, we can calculate the rate constant (k) using the data from Experiment 1:

0.0744 M/s = k * (0.060 M)^2 * (0.030 M)^1

k = 0.0744 M/s / (0.060 M)^2 * (0.030 M)^1

k ≈ 0.1236 M^-2s^-1

Finally, we can calculate the rate of the reaction when [A] is 0.035 M and [B] is 0.070 M:

rate = k * [A]^x * [B]^y

rate = 0.1236 M^-2s^-1 * (0.035 M)^2 * (0.070 M)^1

rate ≈ 0.0591 M/s

for such more questions reaction

https://brainly.com/question/29470602

#SPJ11

Weighing by difference eliminates systematic balance errors because the mass is determined by the difference between two readings, a systematic error in the absolute mass on the balance will be removed by subtracting the final weight from the initial weight.

Option (d) is correct.

Weighing by difference involves weighing the sample container before and after adding or removing the sample. By subtracting the final weight from the initial weight, the mass of the sample can be determined. This method helps eliminate systematic balance errors because any systematic error in the absolute mass reading of the balance will affect both the initial and final weights equally.

Weighing by difference takes into account any potential errors in the balance's absolute mass reading, such as calibration or zero errors, and focuses on the change in mass instead. This approach improves the accuracy of the measurement and reduces the impact of systematic errors associated with the balance.

Therefore, the correct option is (d).

To learn more about absolute mass here

https://brainly.com/question/14453236

#SPJ4

The energy for the transition of an electron from the n = 8 level to the n = 6 level of a hydrogen atom is an emission process.

The energy for the transition between different energy levels of a hydrogen atom can be calculated using the formula:

E = -13.6 eV * (1/n_final^2 - 1/n_initial^2)

For the given transition, the initial energy level is n = 8, and the final energy level is n = 6. Plugging these values into the formula, we get:

E = -13.6 eV * (1/6^2 - 1/8^2)

E = -13.6 eV * (1/36 - 1/64)

E = -13.6 eV * (16/576 - 9/576)

E = -13.6 eV * (7/576)

E ≈ -0.1667 eV

The negative sign indicates that energy is released, which corresponds to an emission process.

For more questions like Energy click the link below:

https://brainly.com/question/2409175

#SPJ11

The phases in the equation are: aq (aqueous) - for Hg2(NO3)2 and NaCl solutions, s (solid) - for Hg2Cl2 precipitate, aq (aqueous) - for NaNO3 solution

The complete ionic equation for the reaction of aqueous Hg2(NO3)2 with aqueous sodium chloride to form solid Hg2Cl2 and aqueous sodium nitrate is:
Hg2^2+ (aq) + 2Cl^- (aq) → Hg2Cl2 (s)
The reaction involves the precipitation of solid Hg2Cl2 due to the reaction of mercury(I) ions (Hg2^2+) with chloride ions (Cl^-) from the sodium chloride solution. The nitrate ions (NO3^-) from the Hg2(NO3)2 solution combine with the sodium ions (Na+) from the sodium chloride solution to form aqueous sodium nitrate (NaNO3).
The overall chemical equation for this reaction is:
Hg2(NO3)2 (aq) + 2NaCl (aq) → Hg2Cl2 (s) + 2NaNO3 (aq)
To know more about ionic equation visit:

https://brainly.com/question/13887096

#SPJ11

The pH of the solution is approximately 4.683.

First, let's calculate the number of moles of [tex]HC_2H_3O_2[/tex]and [tex]HC_2H_3O_2[/tex] in the solution:

Molar mass of [tex]HC_2H_3O_2[/tex] = 60.05 g/mol

Molar mass of [tex]HC_2H_3O_2[/tex] = 82.03 g/mol

Number of moles of HC2H3O2 = mass / molar mass = 10.0 g / 60.05 g/mol = 0.1665 mol

Number of moles of [tex]HC_2H_3O_2[/tex] = mass / molar mass = 12.0 g / 82.03 g/mol = 0.1463 mol

Concentration of [tex]HC_2H_3O_2[/tex] = moles / volume = 0.1665 mol / 0.150 L = 1.11 M

Concentration of [tex]C_2H_3O_2[/tex]- = moles / volume = 0.1463 mol / 0.150 L = 0.975 M

Now we can use the Henderson-Hasselbach equation, which is:

pH = pKa + log([[tex]C_2H_3O_2[/tex]-] / [[tex]HC_2H_3O_2[/tex]])

Substituting the known values:

pKa = -log(Ka) = -log(1.8×[tex]10^{(-5)[/tex]) = 4.74

pH = 4.74 + log(0.975 M / 1.11 M)

Simplifying:

pH = 4.74 + log(0.878)

Using a calculator, we find:[tex]NaC_2H_3O_2[/tex]

pH ≈ 4.74 - 0.057

pH is a measure of the acidity or alkalinity of a solution. It is a scale that ranges from 0 to 14, with 7 being considered neutral. A pH value below 7 indicates acidity, while a pH value above 7 indicates alkalinity. pH plays a crucial role in various biological, chemical, and environmental processes. In biological systems, pH levels affect enzyme activity, cell function, and the overall health of organisms.

The term "pH" stands for "power of hydrogen" and is based on the concentration of hydrogen ions (H+) in a solution. The pH scale is logarithmic, which means that each unit represents a tenfold difference in acidity or alkalinity. For example, a solution with a pH of 3 is ten times more acidic than a solution with a pH of 4.

To know more about pH refer to-

brainly.com/question/2288405

#SPJ4

The main difference between "green chemistry" and "environmental chemistry" is that green chemistry focuses on designing chemical processes and products that are environmentally friendly.

Green chemistry, also known as sustainable chemistry, involves the development of chemical products and processes that reduce or eliminate hazardous substances, waste, and energy use. This approach aims to prevent pollution at the source by designing chemical systems that are inherently safer and more efficient. Green chemistry principles include using renewable resources, minimizing waste, and maximizing efficiency.

On the other hand, environmental chemistry is the study of the chemical and biochemical processes occurring in the environment. It involves the analysis of chemical reactions, pollution, and the effects of human activities on the natural environment. This field aims to understand the impact of these processes and find ways to mitigate environmental problems.
To know more about chemical visit:

https://brainly.com/question/29240183

#SPJ11

Dimethyl ether is a polar molecule with an oxygen atom bonded to two methyl groups. Water is also a polar molecule with two hydrogen atoms bonded to an oxygen atom.

Hydrogen bonding occurs between these molecules due to the attractive forces between the partially positive hydrogen atom in water and the partially negative oxygen atom in dimethyl ether.

In the illustration, you would expect to see hydrogen bonds forming between the oxygen atom of dimethyl ether and the hydrogen atoms of water.

The oxygen atom in dimethyl ether acts as the hydrogen bond acceptor, while the hydrogen atoms in water act as the hydrogen bond donors.

These hydrogen bonds play a crucial role in the interactions between dimethyl ether and water molecules, affecting their solubility and behavior in mixtures.

To know more about hydrogen bonding refer here

https://brainly.com/question/5426849#

#SPJ11

Answer:

Oil-in-water emulsion are droplets of oil dispersed in water. Water-in-oil emulsion are droplets of water dispersed in oil.

Explanation:

if it helped u please mark me a brainliest :-//

K values less than 1 (K < 1) would indicate that there is more B than A at equilibrium.

The equilibrium constant (K) represents the ratio of the concentrations of products to reactants at equilibrium. In the given reaction, A(g) ⇌ B(g), the equilibrium constant expression is K = [B(g)]/[A(g)].

When K < 1, it implies that the concentration of B (denoted as [B(g)]) is smaller compared to the concentration of A ([A(g)]) at equilibrium. Since the equilibrium constant is smaller than 1, it indicates that the reaction favors the formation of reactant A over product B.

Therefore, there is more B than A at equilibrium when the equilibrium constant (K) is less than 1 (K < 1).

Hence, among the given K values, K = 0.8 and K = 7×10^(-9) would indicate that there is more B than A at equilibrium.

For more questions like Equilibrium click the link below:

https://brainly.com/question/31027606

#SPJ11

The new freezing point for a 0.73 m solution of CCl4 in benzene is 1.94 °C.

To calculate the new freezing point for a 0.73 m solution of CCl4 in benzene, we first need to find the change in freezing point caused by adding CCl4 to benzene. This can be calculated using the formula:

ΔTf = Kf × molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for benzene (4.90 °C/m), and molality is the molality of the solution (0.73 m).

ΔTf = 4.90 °C/m × 0.73 m = 3.57 °C

This means that the freezing point of the solution will be lowered by 3.57 °C compared to pure benzene. To find the new freezing point, we simply subtract this value from the freezing point of pure benzene:

New freezing point = 5.51 °C - 3.57 °C = 1.94 °C

Therefore, the new freezing point for a 0.73 m solution of CCl4 in benzene is 1.94 °C.

To know about freezing :

https://brainly.com/question/14404721

#SPJ11

The number of moles of gas contained in the cylinder is approximately 0.381 moles.

To calculate the number of moles of gas contained in the cylinder, we can use the ideal gas law equation:

PV = nRT

Where:

P = Pressure (in atm)

V = Volume (in L)

n = Number of moles

R = Ideal gas constant (0.0821 L·atm/(mol·K))

T = Temperature (in Kelvin)

We need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 23.8 °C + 273.15 = 296.95 K

Now, we can rearrange the ideal gas law equation to solve for the number of moles (n):

n = PV / RT

Plugging in the values:

P = 4.26 atm

V = 15.0 L

R = 0.0821 L·atm/(mol·K)

T = 296.95 K

n = (4.26 atm)(15.0 L) / (0.0821 L·atm/(mol·K))(296.95 K)

n ≈ 0.381 moles

To know more about moles refer here

https://brainly.com/question/15416344#

#SPJ11

There is one molecule that is not directly produced during the Krebs cycle, and that is acetyl-CoA.Acetyl-CoA is the starting molecule for the Krebs cycle but is not produced within it. '

Instead, acetyl-CoA is generated from the breakdown of pyruvate, which is the end product of glycolysis. The Krebs cycle, also known as the citric acid cycle or the tricarboxylic acid (TCA) cycle, is a central metabolic pathway that occurs in the mitochondria of cells.

It plays a vital role in the breakdown of carbohydrates, fats, and proteins to produce energy in the form of ATP. During the Krebs cycle, a series of chemical reactions take place, resulting in the generation of several products.

Pyruvate enters the mitochondria and undergoes a series of enzymatic reactions, known as pyruvate decarboxylation, to produce acetyl-CoA. Acetyl-CoA then enters the Krebs cycle, where it combines with oxaloacetate to form citrate, initiating the cycle.

Know more about Krebs cycle here:

https://brainly.com/question/13153590

#SPJ11

The estimated enthalpy change (ΔH) for the reaction of methane with fluorine is approximately -842 kJ/mol. The negative sign indicates that the reaction is exothermic, meaning it releases energy.

To estimate the enthalpy change (ΔH) for the reaction of methane (CH4) with fluorine (F2) according to the equation: CH4(g) + 2 F2(g) → CF4(g) + 2 H2(g), we need to use the average bond dissociation energies (D) of the bonds involved.The bonds that are broken in the reaction are the C-H bonds in methane and the F-F bonds in fluorine. The bonds that are formed are the C-F bonds in carbon tetrafluoride (CF4) and the H-H bonds in hydrogen gas (H2).The bond dissociation energies (in kJ/mol) are as follows:

D(C-H) = 413 kJ/mol

D(F-F) = 159 kJ/mol

D(C-F) = 485 kJ/mol

D(H-H) = 436 kJ/mol

To estimate the enthalpy change (ΔH) for the reaction, we sum up the energy required to break the bonds and subtract the energy released when new bonds are formed.

ΔH = Σ(bonds broken) - Σ(bonds formed)

ΔH = (4 * D(C-H) + 2 * D(F-F)) - (4 * D(C-F) + 2 * D(H-H))

ΔH = (4 * 413 kJ/mol + 2 * 159 kJ/mol) - (4 * 485 kJ/mol + 2 * 436 kJ/mol)

ΔH = (1652 kJ/mol + 318 kJ/mol) - (1940 kJ/mol + 872 kJ/mol)

ΔH = -842 kJ/mol

for more such questions enthalpy

https://brainly.com/question/16985375

#SPJ11

"resonance". However, if you would like a long answer, I can explain further. Resonance is a phenomenon in which the electrons in a molecule or ion are not localized on a single atom, but rather are spread out over multiple atoms.

This results in the formation of multiple resonance structures, which can be represented using curved arrows and dotted lines. Resonance stabilization is an important factor in determining the stability and reactivity of many organic and inorganic compounds.

This phenomenon is called "charge delocalization" or "resonance." In compounds with delocalized charge, the positive or negative charge is distributed across multiple atoms, leading to a more stable and energetically favorable structure.

To know more about molecule visit:

https://brainly.com/question/30465503

#SPJ11

(a) The average velocity during the period is 2.5 m/s. (b) The distance travelled by the particle during the period is 12.5 m.

It is given that a particle starting from rest moves with constant acceleration and it takes 5.0s to reach the speed 18.0 km/h.

(a) To find the average velocity, we first need to convert the final speed to m/s:

18.0 km/h * (1000 m/km) / (3600 s/h) = 5.0 m/s.

The average velocity is the average of the initial and final velocities:

(0 m/s + 5.0 m/s) / 2 = 2.5 m/s.

(b) To find the distance traveled, we can use the formula

d = (v_initial + v_final) * t / 2.

Plugging in our values, we get:

d = (0 m/s + 5.0 m/s) * 5.0 s / 2 = 2.5 m/s * 5.0 s = 12.5 m.

So, during this period, the average velocity is 2.5 m/s, and the distance traveled is 12.5 m.

Learn more about Velocity:

https://brainly.com/question/25905661

#SPJ11

The correct answer is option A. 484 mmHg.

To convert the pressure from mbar (millibar) to mmHg (millimeters of mercury), we can use the conversion factor: 1 mbar = 0.7501 mmHg.

Given: Pressure in mbar = 645 mbar.

Using the conversion factor:

Pressure in mmHg = 645 mbar * 0.7501 mmHg/mbar.

Calculating the value:

Pressure in mmHg = 483.985 mmHg.

Rounding to the nearest whole number, the corresponding pressure in mmHg is approximately 484 mmHg.

To know more about pressure refer here

https://brainly.com/question/30673967#

#SPJ11