The main function of the meter rule is to measure the distance between the two points , it is use to measure the length.
The first unit of the length is the meter. the length is defined as the distance between the two points. the meter is used to measure the length in the international system of the units. the instrument used to measure the meter is the meter rule or the meter stick. the mete rule is also called as the ruler. before the meter rule of discovery we use the primitive methods to measure the distance.
Thus, the function of the meter is the to measure the distance between the two points.
To learn more about meter here
https://brainly.com/question/17687457
#SPJ4
Explain the reason why you tested electrical conductivity with a solution containing both methanol and water.
In comparison to non-polar hydrocarbon dielectrics like gasoline and diesel fuel, methanol is a polar substance like water and has a relatively high conductivity (conductivities less than 1 x 10⁴ pS/m).
Does methanol have a higher conductivity than water?Therefore, the self dissociation into ions for methanol and ethanol will be less strong than in water. But even in pure ethanol and methanol solutions, these ions will still exist and conduct electricity, albeit at very low conductivities.
Water's electrical conductivity is a measure of how well it can carry a current of electricity. The amount of electrical current that can be conducted in water increases with the concentration of dissolved charged chemicals, also referred to as salts.
To know more about electrical conductivity visit:
https://brainly.com/question/29765686
#SPJ4
What do these two changes have in common?
sauce burning on a stove
firing a clay pot in a hot kiln
Both are caused by cooling
Both converse mass
Both are chemical changes
Both are physical changes
sauce burning on a stove and firing a clay pot in a hot kilnBoth are physical changes. Therefore, option D is correct.
What are physical changes?Physical changes can be defined as changes affecting the state of a chemical substance, but not its composition. Physical changes can be used to separate mixtures into their component compounds, but can not generally be used to separate compounds into elements or simpler compounds.
Physical changes takes place when substances undergo a change that can not change their composition. while the chemical change in which the composition of a substance changes when substances combine or break up to form new substances.
In general a physical change can be consideed as reversible using physical means. A physical change includes a change in physical properties such as change of strength, change of durability, textural change, shape, size, volume and density.
Learn more about physical changes, here:
https://brainly.com/question/17931044
#SPJ1
It takes 75.0mL of a 2.50M HCl solution to neutralize 55.0mL of a base unknown concentration. Calculate the concentration of a unknown basic solution.
If it takes 75.0mL of a 2.50M HCl solution to neutralize 55.0mL of a base unknown concentration, the concentration of a unknown basic solution is 1.83M.
How to calculate molarity?Molarity in chemistry is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.
The molarity of two solutions in a neutralization reaction can be calculated as follows:
CaVa = CbVb
Where;
Ca = molarity of acidCb = molarity of baseVa = volume of acidVb = volume of baseAccording to this question, 75.0mL of a 2.50M HCl solution is required to neutralize 55.0mL of a base unknown concentration. The concentration of the solution can be calculated as follows:
2.5/75 = Cb/55
0.0333333333 × 55 = Cb
Cb = 1.83M
Therefore, 1.83M is the molarity of the unknown basic solution.
Learn more about molarity at: https://brainly.com/question/2817451
#SPJ1
A sample of an unknown gas at STP has a density of 0.630 grams per liter. What is the gram molecular mass of this gas?
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, 0.630 is the gram molecular mass of this gas.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density = Mass of the gas ÷volume marked on the graduated cylinder
density= 0.630 grams per liter
means 0.630 grams of an unknown gas is present in 1 liter of solution
Therefore, 0.630 is the gram molecular mass of this gas.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ1
The normal boiling point for acetone is 56.5°C. At an elevation of 5300 ft the atmospheric pressure is 630. torr. What would be the boiling point of acetone (ΔHvap 32.0 kJ/mol) at this elevation? What would be the vapor pressure of acetone at 22.0°C at this elevation?
The normal boiling point for acetone is 56.5°C. At an elevation of 5300 ft the atmospheric pressure is 630. torr. The vapor pressure of acetone at 22.0°C at this elevation is 212.22 torr.
What is vapor pressure ?The equilibrium pressure of a vapour above its liquid (or solid), or the pressure of the vapour produced by the evaporation of a liquid (or solid) above a sample of the liquid (or solid) in a closed container, is the vapour pressure of a liquid. Substance; vapour pressure at 25 °C, as examples.
In Step 1:
The normal boiling point for acetone = 56.5°C.
At an elevation of 5300 ft the atmospheric pressure = 630 torr
ΔHvap = 32.0 kJ/mol
The temperature is 24.0 °C
In Step 2:
ln(p1/p2) = (∆ H/R) (1/T2 - 1/T1)
Normal atmospheric pressure
= 1 atm
= 760 torr
So, (760/630) = ((32.000 J/mol) / (8.314 J/K*mol)) (1/T2 - 1/329.65 K).
T2 = 324.4 K = 51.25 °C.
This is the boiling point of acetone at 5300 ft.
The vapor pressure = atmospheric pressure at the boiling point for any liquid.
ln (Pv/630atm) = ((32.000 J/mol) / (8.314 J/K*mol)) (1/324.4 K - 1/297.15)
ln (Pv/630) = -13615388.3
Pv = 212.22 torr
Thus, The vapor pressure of acetone at 22.0°C at this elevation is 212.22 torr.
To learn more about the vapor pressure, follow the link;
https://brainly.com/question/11864750
#SPJ1
1.
Which of the following best explains the
relationship between molecules and atoms?
A
Atoms are molecules that have a charge.
B
Atoms have smaller parts, called
molecules.
С
Molecules are made up of two or more
atoms.
D
Molecules are atoms that have no mass.
1- Give the chemical formula for trans-dichlorobis(ethylenediamine)platinum(IV). Use (en) as the symbol for ethylenediamine.
2- Give the systematic name of this coordination compound.
Na[Al(OH)4]
1.trans-[Pt(en)2Cl2]2+
2.coordination compound Na [Al (OH)] systematic name: sodium tetrahydroxidoaluminate (III)
For several industrial and technical applications, sodium aluminate serves as an efficient supply of aluminum hydroxide. A white crystalline solid with the chemical formula NaAlO2, NaAl(OH)4 (hydrated), [2] Na2OAl2O3, or Na2Al2O4, pure sodium aluminate (anhydrous) is a white substance. Both a solution and a solid form of sodium aluminate are sold commercially.Other comparable compounds, often referred to as sodium aluminate, include Na5AlO4 and Na7Al3O8, which contain complex polymeric anions and Na17Al5O16 and NaAl11O17, which was originally wrongly thought to be -alumina, a phase of aluminum oxide.Aluminum chloride, sodium chloride, and water are produced when hydrogen chloride and sodium tetrahydroxoaluminate interact. Diluted hydrogen chloride in a solution form.
Learn more about coordination compound Refer: brainly.com/question/23159765
#SPJ4
What procedures should be followed if a chemical spill occurs?
Prevent the spread of dusts and vapors.Neutralize acids and bases, if feasible. Manage the spread of the liquid.absorb the liquid.Gather and incorporate the cleanup residues. Get rid of the wastes. Decontaminate the area and affected system.
Chemical spills are the uncontrolled launch of a dangerous chemical, both as a strong, liquid or a gas. these spills need to be minimized as tons as possible.
Chemical spills usually result from the dangerous handling of chemical compounds, incorrect chemical storage, chemical garage tank ruptures, incorrect containers for chemical disposal, and failure to eliminate chemical substances in a well timed way.
There are sorts of spills that you can run into: simple Chemical Spills and complex Chemical Spills. easy Chemical Spills are small, confined, and present minimal dangers.
To know more about chemical click here
https://brainly.com/question/26487468
#SPJ4
In the molecule C2H4 the valence orbitals of the carbon atoms are assumed to be?
a) dsp hybridized
b) not hybridized
c) sp hybridized
d) sp^3 hybridized
e) sp^2 hybridized
In the molecule C2H4, valence orbitals of the carbon atoms are assumed to be e) sp^2 hybridized.
What is valence orbitals?The set of orbitals that can energetically accept electrons to create chemical bonds is known as the valence shell. The ns and np orbitals in the outermost electron shell make form the valence shell for main-group elements.
The outside electrons engaged in bonding are called valence electrons. A particular atom can have 0 to 7 valance electrons since valance electrons can only exist in the s and p orbitals. Noble gases are atoms that have no valence electrons and dislike forming bonds.
To know more about valence orbitals, refer
https://brainly.com/question/14312272
#SPJ4
What is the mass % of carbon in dimethylsulfoxide (C2H6SO) rounded to three significant figures? A) 7.74 B) 78.1 C) 25.4 D) 30.7 E) 28.6
The mass % of carbon in dimethyl sulfoxide (C2H6SO) rounded to three significant figure is calculated as 30.718%.
What is mass percentage?Mass percent of a solution is defined as the ratio of the mass of solute that is present in solution, relative to the mass of solution as a whole. To calculate mass percent of an element in a compound, we divide mass of the element in 1 mole of the compound by the molar mass and then multiply the result by 100.
As we know molar mass of carbon is 12 g/mol and molar mass of dimethyl sulfoxide is 78.13 g/mol
Mass % of carbon (C2) in dimethyl sulfoxide (C2H6SO) = 2* (12/78.13) * 100
= 30.718%
To know more about mass percent, refer
https://brainly.com/question/26150306
#SPJ4
John is completing a lab in which he is using the corrosive base sodium hydroxide (NaOH). For this laboratory experiment, what types of safety precautions should he take
Please put on a lab apron. It helps shield clothing from damage and stains. Examining glass for fractures and chips. This damaged or chipped glassware needs to be properly disposed of.
In order to deal with it safely, we must take the appropriate precautions. Skin burns or other skin injury can be brought on by sodium hydroxide. Additionally, it can injure eyes. Learn as much as you can about the chemicals that will be utilized, including any exposure or leak risks. Find the spill kits and learn how to use them. Verify labels and throw away any chemicals that aren't 100 percent pure. For ease of access, alphabetize the lab chemicals. Security is the practice of keeping unwelcome dangers and hazards out of the lab environment.
To learn more about sodium hydroxide click here https://brainly.com/question/29327783
#SPJ4
A compound is composed of carbon and hydrogen and has an empirical
formula of CH. The molar mass of the compound is experimentally
determined to be 78.12 g/mol. What is the molecular formula for the
compound?
A compound has the empirical formula CH and is made up of carbon and hydrogen. the compound's molecular formula is C6 H6.
How is a molecular compound identified?Compounds that involve a metal binding with a non-metal or a semi-metal will typically exhibit ionic bonding. Molecular compounds are those whose only non-metals or semi-metals contain non-metals. These compounds exhibit covalent bonding.
The compound with the lowest whole number ratio can be found in its empirical formula.
The empirical formula for weight is 12+1=13,
while the molecular formula for weight is 13 78 = 6.
The molecular formula for weight is (CH)n = (CH)6 =C6 H6.
To learn more about compound's molecular here:
https://brainly.com/question/23088724
#SPJ1
Which of the following molecules are polar: Cl2, CO2, BF3, NO, SO2, XeF4
Group of answer choices
O NO, SO2 only
O Cl2, CO2 only
O NO, XeF4 only
O BF3, XeF4 only
Only the molecules of NO, SO2 are polar. These chemicals are referred to as polar solvents since they have both positive as well as ends.
What does the chemical term "polar" mean?a structure where the density of electrons is unevenly distributed. Nonpolar refers to a structure where the density of electrons is more or more uniformly distributed. Numerous physical, molecular, and ecological properties of molecules are influenced by polarity, which can take many different forms.
Why are bonds polar?A polar molecule bond is one in which there is an electrostatic potential difference in between atoms of between 0.5 and 2.0. A polar covalent link is a type of covalent bond with which the atoms are attracted to electrons in uneven amounts, resulting in looked.
To know more about polar visit:
https://brainly.com/question/11405437
#SPJ1
what is the likely composition of the indicator solution when the intermediate or transistion color is observed in step 6
A blend of dyes called a universal indicator gradually changes color throughout a pH range of 4 to 14. The color serves as a direct indicator of pH.
Thymol blue, methyl red, bromothymol blue, and phenolphthalein are the primary ingredients of a universal indicator in the form of a solution. Colors ranging from yellow to red denote an acidic solution, whereas colors ranging from blue to violet denote an alkaline solution and green denotes a neutral solution. Substances called indicators are those whose solutions change color as the pH changes. We refer to these as acid-base indicators. The conjugate base or acid versions of these typically weak acids or bases have various hues because of variations in their absorption spectra.
Learn more about solution here-
https://brainly.com/question/7932885
#SPJ4
How many valence electrons would there be in an atom with 14 protons?
There would be 4 valence electrons in an atom with 14 protons
An element is any substance made entirely of one type of atom. For instance, all of the atoms that make up the element carbon are carbon atoms. The atomic number of an element describes how many protons are present in that element's atoms. Inside a neutral atom, the number of protons and electrons must be equal.
The atomic number of an element also serves as a guide to its location on the periodic table.
According to the question, an element has 14 electrons. This implies that it must have 14 protons, indicating that its atomic number is 14.
We must first list any possible electrical configurations for the element before we may locate it:
1s²2s²2p⁶3s²3p²
In the outermost shell, there are four electrons. The element therefore has 4 electrons in its valence shell is 4
Learn more about atomic number at https://brainly.com/question/8834373
#SPJ4
Why does c14 have 8 neutrons?
C14 have 8 neutrons, because C have 6 atomic number and it have 14 atomic mas , where atomic mass is total of proton and neutron so the neutron of C14 is 8.
It is commonly known that Carbon-14 is an isotope of carbon. It is also known as a neutral atom. Additionally, the ratio of neutrons to protons varies among different isotopes.
The total number of protons that make up an atom's nucleus is represented by the atomic number of that atom, as is well known. We know that carbon has an atomic number of 6, a mass number of 14. It is common knowledge that mass is the product of protons and neutrons. There will thus be = 14 - 6 = 8 neutrons.
Learn more about neutron at brainly.com/question/29248303
#SPJ4
Is a mole equal to 1 molecules?
No, one molecule does not make up a mole. In chemistry, the terms "mole" and "molecule" are used interchangeably.
The word "mole" is used to describe a quantity that cannot be expressed in terms of grams or milligrams. A mole thus counts the quantity of atoms, ions, or molecules.
A molecule is a type of chemical that develops when multiple atoms are combined by chemical bonding. Electrical charge does not exist in molecules. A molecule's constituent atoms may come from the same element or from separate elements. Varying molecules have different ratios between these atoms. Molecules are a unit of measurement for the quantity of molecules in a system.
The primary distinction between a mole and a molecule is that a mole is a unit of measurement for amount whereas a molecule is an atomized chemical species.
To learn more about mole click here
https://brainly.com/question/26416088
#SPJ4
Two liquids whose boiling points differ considerably can be separated from their mixture by
Answer:
heating the mixture until one liqiid remains
Explanation:
This is because the liquids have different boiling points there fore meaning that one liquid will evaporate begore the other
A chemist prepares a solution of magnesium bromide by measuring out of into a volumetric flask and filling to the mark with distilled water. Calculate the molarity of anions in the chemist's solution.
The assumed or arbitrary molarity of anions in the chemist's solution is found out to be 2.17 M.
Since neither the mass of magnesium bromide and the volume of the volumetric flask are not given, one can assume arbitrary values and you could modify them whenever you want, thus, let 50.0g of magnesium bromide to be the measured out amount of solute and a 250-mL volumetric flask where the solution is prepared, so the final volume of the solution is 250 mL after the addition of distilled water. In this manner, the bromide anions moles, taking into account there are two bromide moles per magnesium bromide moles giving the value of 0.543 mols.
The molarity can be calculated as follows:
M= 0.543 mol Br-/0.250 L= 2.17 M
To learn more about molarity check the link below:
https://brainly.com/question/14469428
#SPJ4
The empirical formula for the compound having the formula H₂C₂O4 is
C₂O₂H₂
COH
COH ₂
CO₂H
C₂H₂
Answer:
CO₂H
Explanation:
The empirical formula gives the smallest whole number ratio of atoms of each element in a compound.
The ratio of hydrogen, carbon and oxygen in H₂C₂O₄ is:
H : C : O
2 : 2 : 4
They have a common factor of 2, so we can divide the atoms of each element by 2:
H : C : O
1 : 1 : 2
This gives us HCO₂ or CO₂H
Determine the electron geometry (eg) and molecular geometry (mg) of NCl3.
O eg=tetrahedral, mg=trigonal pyramidal
O eg=linear, mg=trigonal planar
O eg=tetrahedral, mg=tetrahedral
O eg=linear, mg=linear
O eg=trigonal planar, mg=bent
The correct answer is : Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons
O eg=tetrahedral, mg=trigonal pyramidal
The electron geometry (eg) of NCl3 is determined by the positions of the electrons around the central atom, nitrogen (N). NCl3 has one lone pair of electrons on nitrogen and three bonding pairs of electrons with chlorine atoms, so the electron geometry is tetrahedral. NCl3's molecular geometry (mg) is determined by the atom positions in the molecule. In a trigonal pyramidal shape, NCl3 has one nitrogen atom in the centre and three chlorine atoms surrounding it. Nitrogen's molecule bends into a trigonal pyramidal shape due to the presence of one lone pair of electrons. Electron geometry, also known as electron pair geometry, is the arrangement of electron pairs in a molecule or ion around a central atom. It is determined by the number of electron pairs surrounding the central atom, which includes both bonding pairs and lone electron pairs. The electron geometry can be used to predict the overall shape of a molecule or ion and also helps to understand the polarity of the molecule.
To learn more about electron geometry here:
https://brainly.com/question/7558603
#SPJ4
2 As (s) + 6 NaOH (aq) → 2 Na3AsO3 (s) + 3 H2 (g)
If 39.3g of As reacts with excess NaOH at STP, what volume of H2 will be produced in liters?
According to stoichiometry and STP conditions ,1785.90 liters of hydrogen is produced.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given reaction as per stoichiometry, 149.84 g of As produces 6 g hydrogen , thus, 39.3 g of As will produce 39.3×6/149.84=1.573 g.
As per STP conditions, V=1.573/2×8.314×273/1=1785.90 liters.
Thus, 1785.90 liters of hydrogen is produced.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
A compound is found to contain 10.37 % phosphorus, 4.689 % nitrogen, and 84.95 % iodine by weight. The molecular weight for this compound is 298.8 g/mol. What is the molecular formula for this compound
Answer:
P₂N₂I₄
Explanation:
Firstly, we calculate the empirical formula of the compound. To do this we find the moles of each element. Treat the percentages as masses.
The formula for moles is:
[tex]moles = \frac{mass}{relative \: atomic \: mass}[/tex]
The masses of each element are:
Phosphorus = 10.37g
Nitrogen = 4.689g
Iodine = 84.95g
The relative atomic masses of each element are:
Phosphorus = 31.0
Nitrogen = 14.0
Iodine = 126.9
Using these values, we can calculate the moles of each element:
[tex]moles \: of \: phosphorus = \frac{10.37}{31.0} = 0.335[/tex]
[tex]moles \: of \: nitrogen \: = \: \frac{4.689}{14.0} = 0.335[/tex]
[tex]moles \: of \: iodine \: = \: \frac{84.95}{126.9} = 0.669[/tex]
Using the moles, write them in a ratio to find the ratio of moles:
Phosphorus : nitrogen: iodine
0.335 : 0.335: 0.669
The smallest number here is 0.335, so divide each number by 0.335
0.335÷0.335=1
0.335÷0.335=1
0.669÷0.335=1.99... = 2 (round to the nearest whole number)
These numbers are used as the subscripts of each element.
This means that the empirical formula is:
PNI₂
To calculate the molecular formula:
[tex]\frac{molar \: mass \: of \: molecular \: formula}{molar \: mass \: of \: empirical \: formula}[/tex]
The molar mass of empirical formula is adding the molar masses of compound PNI2:
31.0 + 14.0 + 126.9 = 171.9
The molar mass of molecular weight or mass = 298.8 (given from the question)
Substitute these in the formula above:
[tex] \frac{298.8}{171.9} = 1.738...[/tex]
1.738 = 2 rounded to the nearest whole number.
Multiply all the subscripts seen in the empirical formula by the number 2:
PNI₂ × 2 = P₂N₂I₄
Step 4: measure the mass of the book
The book will serve as a flat surface on which you later place additional weights. It has its own mask but you need to measure.
Zero the balance. Place the book on the balance.
Measure the mass of the nearest gram (1g)
498 g
In this experiment, you will measure all masses in kilograms. Convert the books mass to kilograms
0. 498 kg
The weight of the book in kilograms is 0.498Kg.
A body's bulk is an innate characteristic. It was widely believed to be related to the volume of matter in a physical body prior to the discovery of the atom and particle physics.
You can work on a level surface provided by the book.
will eventually add more weights. It is distinctive in its own way. The mass must be measured.
the account balance to 0 the scale with the book on it. Weigh the object down to the nearest gram (1 g). 498g In this experiment, all masses will be measured in kilograms. the books weigh 0.498 kg in kilograms.
Learn more about mass.
brainly.com/question/18064917
#SPJ4
PLEASE HELP 100 POINTS FOR THIS
A student placed a piece of nickel in silver nitrate solution. Silver metal precipitated and
aqueous nickel (II) nitrate was produced. The student collected the following data:
Mass of beaker 102. 05 g
Mass of beaker with silver 103. 13 g
Mass of nickel before 5. 00 g
Mass of nickel after 4. 69 g
__ Ni + __ AgNO 3 à __ Ag + __ Ni(NO 3 ) 2
Determine the percent yield of silver
Answer:
Explanation:
Mass the fluid, find its volume, and divide mass by volume. To mass the fluid, weigh it in a container, pour it out, weigh the empty container, and subtract the mass of the empty container from the full container. To find the volume of the fluid, you simply measure it very carefully in a graduated cylinder.
Are group 1 or group 2 elements more reactive?
The elements belonging to group 1 are more reactive than elements belonging to group 2.
The elements that belongs to s block elements are hydrogen (H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr). The nature of alkali metals is soft and shiny in appearance. They have low melting point and are highly reactive in nature and usually tarnish when exposed to air. Sodium (Na) is the most reactive element since it's valence electrons are not tightly held together in the atom. The three elements that are highly reactive are Lithium (Li), Sodium (Na), and potassium (K). The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive.
To learn more about alkali metals check the link below:
brainly.com/question/15220625
#SPJ4
One grizzly bear population has moved to an area that has snow year-round. Which of these statements might you expect to occur if a mutation for coat color is going to spread through the population?
To solve this we must be knowing each and every concept related to mutation and types of mutations. Therefore, the correct option is option C.
What is mutation?A mutation is, at its most basic, a change or alteration. Chromosome and gene alterations, known as mutations in biology, frequently appear physically.
One grizzly bear population has moved to an area that has snow year-round. If a mutation for coat color is going to spread through the population then Grizzly bears that have a lighter fur mutation can catch prey more easily and so have more resources to have more offspring. Due to this, the trait starts to spread through the population.
Therefore, the correct option is option C.
To learn more about mutation, here:
https://brainly.com/question/18909373
#SPJ1
How does atomic number affect properties?
The atomic number is the number of protons in the nucleus of an atom and it directly affects the properties of an element. The atomic number also determines the element's place in the periodic table, which allows us to predict the properties of an element based on its atomic number.
As the atomic number increases, the number of protons in the nucleus increases and so does the atomic number. This increase in protons also increases the number of electrons in the atom. The number and arrangement of electrons in an atom directly affect its chemical behavior and thus the properties of the element.
The atomic number also determines the element's position on the periodic table, and elements with similar atomic numbers have similar chemical and physical properties. For example, elements in the same vertical row (group) have similar chemical properties, and elements in the same horizontal row (period) have similar electronic configurations of their atoms.
The atomic number also affects the reactivity of an element. Elements with lower atomic numbers tend to be more reactive than elements with higher atomic numbers.
Learn more about atomic number here: https://brainly.com/question/621740
#SPJ4
A. If you have a Periodic Table that is NOT color-coded describe where to look on the periodic table to to find elements which have similar chemical properties.
B. Explain why they have similar chemical properties.
C. Name three elements that have those similarities.
(I need a written paragraph please)
Answer:
Explanation:
A. Periodic table is beautifully arranged to place elements with similar chemical properties together. A family or a group is a vertical column in periodic table that has elements with similar property.
B. They all have similar properties because they all have the same number of valence electrons that determine the chemical properties such as reactivity of the element.
C. Lithium, sodium, potassium all fall in group 1 called alkali metals and these elements all share the property of being some of the most reactive elements.
Which represents the greatest mass?
• all the same
• 1.0 mol P
• 1.0 mol I
• 1.0 mol K
• 1.0 mol Al
Answer:
it is 1 mole of I is correct