When you apply a horizontal force of 51 N to a block, the block moves across the floor at a constant speed. (a) When you apply a force of 40 N to the block initially at rest, what is the magnitude of the horizontal component of the force that the floor exerts on the block? (b) When you apply a force of 59 N, what is the magnitude of the horizontal component of the force that the floor exerts on the block?

Answers

Answer 1

(a) When you apply a force of 40 N, the magnitude of the horizontal component of the force that the floor exerts on the block is 51 N.

(b) When you apply a force of 59 N, the magnitude of the horizontal component of the force that the floor exerts on the block is 51 N.

Net force on the block

The horizontal component of the force that the floor exerts on the block is determined by applying Newton's second law of motion;

[tex]F = ma[/tex]

When the block moves at a constant speed

[tex]\Sigma F = 0\\\\F - F_f = 0\\\\F = F_f[/tex]

[tex]F_f = F\\\\F_f = 51 \ N[/tex]

where;

[tex]F_f[/tex] is the frictional force exerted on the block by the floor

Since the surface (floor) is constant, the frictional force (horizontal component of the force that the floor exerts on the block ) will be the same on the cases.

Learn more about frictional force here: https://brainly.com/question/24386803

Answer 2

Based on the definition of limiting frictional force;

the magnitude of the horizontal component of the force that the floor exerts on the block is equal to 40 N when a force of 40 N is applied to the block, the magnitude of the horizontal component of the force that the floor exerts on the block is equal to 51 N, the limiting frictional force, when a force of 59 N is applied to the block.

What is force?

Force is any push or pull effect which tends to cause a change in the motion or shape of an object.

Based on Newton's third law, every force produces an equal and opposite reaction.

Therefore, the force that the floor exerts on the block is oppositely direction to the force exerted by the horizontal force acting on the block.

Since a horizontal force of 51 N applied to the block is required to keep the block moving across the floor at a constant speed, this is the limiting frictional force.

a) when a force of 40 N is applied to the block, the magnitude of the horizontal component of the force that the floor exerts on the block is equal to 40 N

b) when a force of 59 N is applied to the block, the magnitude of the horizontal component of the force that the floor exerts on the block is equal to 51 N, the limiting frictional force.

Learn more about limiting frictional force at: https://brainly.com/question/23092926


Related Questions

What can be proved from the given figure? ​

Answers

It prove that liquid pressure increases with depth

PLEASE HELP! Will give BRAINILIEST! An amplifier can magnify the intensity of sound waves by a factor of 1,000. If a 30dB sound is fed into the amplifier, how many decibels will come out?

Answers

Answer:

30,000dB

Explanation:

30,000dB because 30 multiplied by a factor of 1000 is 30,000

Hope this helps! :)


A car starts from rest and speeds up to 30 m/s in a total of 6 s.
What is the acceleration?
ctive
5 m/s2
30 m/s
ker
24 m/s2
5 m/s

Answers

Answer:

5 m/s2

Explanation:

Using the equation velocity = initial velocity + (acceleration x time)

30 m/s = 0 + acceleration x 6 s

30 m/s = 6 s x acceleration

30 m/s / 6s = acceleration

acceleration = 5 m/s2

Rahim and john were two friends. once rahim went to visit the new house of john . to expel hot air out of the kitchen, john fitted an exhaust fan on his kitchen window. by seeing this , rahim said to john that an exhaust fan should place on the wall near his kitchen ceiling. otherwise, the exhaust fan will not expel the hot air more effectively.
(a). is rahim right or wrong ? why?
(b). how a vantilator works in circulating fresh air in the room?

Answer soon as possible

Answers

Answer:

i don't know how to explain it but I think it's just the way you do it by yourself

hii guyss how r u all many days after i came online!!​

Answers

Answer:

I AM COOL DUDE HOW R U?

Explanation:

An ant climbs at a steady speed up the side of its
anthill, which is inclined 30.0" from the vertical. Sketch
a free-body diagram for the ant.
Pleas help me it urgent !?

Answers

The weight of the ant is the force that acts on the anthill in the downward direction and at angle of 30° rom the vertical.

Given the following data:

Angle of inclination = 30.0°.

What is a free-body diagram?

In Science, a free-body diagram can be defined as a graphical illustration which is typically used to visualize moments, tension, and applied forces that are acting on an isolated or rigid body (object) while using arrows pointing in the direction of these forces.

In this scenario, the weight of the ant is the force that acts on the anthill in the downward direction and at angle of 30° rom the vertical.

Read more on free-body diagram here: https://brainly.com/question/18770265

who is a meterologist?​

Answers

Answer:

A meteorologist is a scientist who studies weather Explanation:

A meterologist is a scientist who studies the weather condition of an environment.

WHO IS A METEROLOGIST?

A meteorologist is a scientist that specifies in the act of understanding and forecasting the atmospheric condition or weather of the Earth surface.

The branch of science that studies weather is called meteorology and a meterologist uses several techniques and tools to explain weather.

Therefore, a meterologist is a scientist who studies the weather condition of an environment.

Learn more about meterologist at: https://brainly.com/question/13719412

A box of spherical jawbreaker candies is 23 g and its volume is 32.3 cm3. If the average mass of a single jawbreaker is 0.94 g, what is the radius of a single jawbreaker

Answers

The radius of each jawbreaker is approximately 0.68 cm.

Volume of a sphere;v = 4 /3 πr³

where

r = radius

Therefore,

23 g  = 32.3 cm³

0.94 g  = ?

cross multiply

volume of a single jawbreaker = 32.3 × 0.94 / 23 = 30.362 / 23 = 1.32 cm³

Therefore,

volume of each jawbreaker = 4 /3 πr³

1.32 = 4 / 3 × 3.14 × r³

r³ = 1.32 /4.18666666667

r³ = 0.31533683707

r = ∛0.31533683707

r = 0.680651651 = 0.68

Therefore, the radius of each jawbreaker is approximately 0.68 cm.

learn more on radius here: https://brainly.com/question/19172427

what do you mean by escape speed at a place?

Answers

In celestial mechanics, escape velocity or escape speed is the minimum speed needed for a free, non-propelled object to escape from the gravitational influence of a primary body, thus reaching an infinite distance from it.

HOPE IT HELP! PLEASE MARK AS BRAINLIEST!

What type of wave squeezes together and
pulls apart?
A. longitudinal wave
B. transverse waves
C. seismic waves
D. electromagnetic waves

Answers

Answer:

B, longitudinal moves up and down, seismic also,l

Brainliest if correct Question 2 of 10
What two types of energy does a rock have as it rolls down a hill?
O A. Sound energy
B. Potential energy
c. Nuclear energy
D. Kinetic energy
E. Magnetic energy
SUBMI

Answers

Answer:

b and d

Explanation:

mary jogs for 15 min at 240 m/min, walks the next 10 min at 90 m/min

Answers

Answer: 4500 m

Explanation:

[tex]15 min. * \frac{240 m}{min.} = 3600 m[/tex]

[tex]10 min. * \frac{90m }{min.} = 900 m[/tex]

[tex]3600m +900m = 4500m[/tex]

17. Which one of the following temperatures is equal to 5°C?
OA. 278K
ОВ.0К
OC. 418
0D.465K

Answers

Answer:

A. 278K

Explanation:

I look it up it and I used a conversion chart

How long does it take light to travel through a 5.20- mm -thick piece of window glass?

Through what thickness of water could light travel in the same amount of time?

Answers

Explanation:

Explanation: The speed of light in a vacuum is 3⋅108 m/s . We can now convert to a more appropriate symbol, such as the nanoseconds. So, it will take light approximately 333

200,000 kilometers per secondrefractive index of 1.5).

You are riding your bike at 5 mis. In order to avoid hitting a child that has
run into the street, you slam on your brakes and slow to a stop. It takes you
1.5 seconds to fully stop. What was your acceleration?

Answers

You are riding your bike at 5 m/s. In order to avoid hitting a child that has run into the street, you slam on your brakes and slow to a stop. It takes you  1.5 seconds to fully stop. Acceleration will be  3.33 [tex]m/s^{2}[/tex]

The branch of physics that defines motion with respect to space and time, ignoring the cause of that motion, is known as kinematics. Kinematics equations are a set of equations that can derive an unknown aspect of a body’s motion if the other aspects are provided.

given

speed = 5 m/s

time = 1.5 seconds

using

v = u + at

0 = 5 + a ( 1.5 )

a = -5 / 1.5

 = 3.33 [tex]m/s^{2}[/tex]

Acceleration will be  3.33 [tex]m/s^{2}[/tex]

To learn more about kinematics here :

https://brainly.com/question/27126557

#SPJ1

In a Capacitor of 0.000031 F. a charge of 0.000022 C. exists between the plates.If the separation is 0.7 mm, What is the electric field?

Answers

Answer:

1014 V/m

Explanation:

C = 0.000031 F. Q = 0.000022 C, d = 0.7 mm,

V = Q/C = 0.000022/0.000031 = 0.7097 V

E = V/d = 0.7097/0.0007 = 1014 V/m

which factor should a student include in a model to explain differences in temperature at earthed equator and earths poles?

Answers

Answer:

The uneven heating of Earth by the sun causes the climate to be warm and dry at the equator and cold and wet toward the poles. The angle of sunlight is different at different latitudes, which causes the climate to be warm at the equator and colder toward the poles.

Explanation:

mark brainliest

. If the electrical force of repulsion between two same amount of charges is 10 N, and
they are 30000 m apart. What is the magnitude of each charge?

Answers

Answer:I dont know

Explanation:

Because I dont  know

what is the meaning of energy

Answers

Answer:

Energy by definition is the property of matter that involves interactions with molecules, in order to perform an action.

Explanation:

They're many different types of energy, a few of them are...

. Thermal energy
. Solar energy
. Chemical energy
. Kinetic energy
. Potential energy
. Mechanical energy to name a few...

All of these specific energies involve the interaction of molecules which are used for different things and can be converted from one type of energy to another.

Hope this helps.

what is the valency of Sulphur!!​

Answers

Explanation:

The sulphur atom has 6 electrons in the outermost shell, and its valency could be 6. But it is easier for sulphur to gain two electrons instead of losing six electrons. Hence, its valency is determined by subtracting six electrons from the octet and this gives a valency of two for sulphur.

A variable resistor is set to a value of 5 ohms, and a current-voltage (I-V) graph (with I on the y-axis and V on the x-axis) is plotted for it. Its resistance is then doubled to 10 ohms. What effect will this have on its I-V graph?​

Answers

When the resistance is doubled, the current reduces by half.

Ohms law

Ohms law states that the voltage applied to a circuit is directly proportional to the current flowing in the circuit.

V = IR

V/R = I

where;

V is emf of the batteryR is resistanceI is the current

From the equation above, when the resistance is doubled, the current reduces by half.

Learn more about ohms law here: https://brainly.com/question/231741

If the population of frogs decreased, then what would increase?

A

foxes

B

hawks

C

caterpillars

Answers

Answer:

my answer is letter b ithink

Question 20 Essay Worth 5 points)
What is the power rating of an LED light bulb if 0.50 A flow through it when connected to an 18 V battery?
Remember to identify all data (givens and unknowns), list equations used, show all your work, and include units and the proper number of
significant digits to receive full credit

Answers

So, the power rating of that LED light bulb is 9 Watt.

Introduction

Hi ! I will answer your question. This material is about electricity where You are instructed to calculate the rated power of a lamp. Always remember, the power required by the lamp must also be at least the same as the power from the mains so that the light is not too dim or the lamp does not explode.

Formulas Used

In this question, the formula used is the formula for calculating power, which is the product of the voltage and current flowing. It can be seen mathematically as below:

[tex] \boxed{\sf{\bold{P = V \times I}}} [/tex] Or

[tex] \boxed{\sf{\bold{P = \frac{V^2}{R}}}} [/tex]

With the following condition :

P = power that needed (Watt or W)V = voltage that used (Volt or V)I = current that flowed (Ampere or A)R = resistance in electric tools (Ohm or [tex] \sf{\varOmega} [/tex])

Problem Solving

We know that :

V = voltage that used = 18 VI = current that flowed = 0.50 A

What was asked :

P = power that needed = ... W

Step by step :

[tex] \sf{P = V \times I} [/tex]

[tex] \sf{P = 18 \times 0.5} [/tex]

[tex] \boxed{\sf{P = 9 \: Watt}} [/tex]

Conclusion :

So, the power rating of that LED light bulb is 9 Watt.

PLEASE HELP! WILL GIVE BRAINLIEST! A jet travels through air at 464.1 m/s. If the air has a temperature of 0 degrees C, at what Mach number is the jet flying?

Answers

Answer:

Mach 1.4

Explanation:

V = 331.5 + 0.6*0 = 331.5 m/s

464.1/331.5 = Mach 1.4

What is the most important reason that astronomers have learned more about our planetary system in the last 30-40 years than all of history before then.

Answers

Because in the last 30-40 astronomers were able to build more advanced technologies to test and research theories about our planetary system.

A hiker travels 5.0 km north and then 2.5 km west What is the resultant displacement vector?​

Answers

Answer: The resultant displacement vector is 5.6km

The resultant displacement vector of the hiker is equal to 5.6 km.

What is displacement?

The distance can be described as the total length traveled by an object and is a scalar quantity with only magnitude. The distance should be always positive.

The displacement of an object can be described as the shortest length between two points. The displacement can be considered as a vector quantity with direction & magnitude. The displacement can be +ve, -ve, or zero and can be changed with time.

Given, a hiker moves 5.0 km along AB in the North and then 2.5 km west along BC.

The length (AC) is the resultant displacement that can be calculated by using Pythagoras' theorem:

AC² = AB² + BC²

AC² = (5.0)² + (2.5)²

AC² = 25 + 6.25

AC = 5.59 km ≈ 5.6 km

Therefore, the displacement of the hiker is 5.6 Km.

Learn more about displacement, here:

brainly.com/question/3243551

#SPJ2

a propeller has a diameter of 76 inches. what is the area covered by the propeller after 3 complete turns?

Answers

Answer:

looking at aircraft of a similar size and performance, the propeller diameter is generally in the region of 1.4 – 1.8 m (4.6 ft to 6.0 ft).

Explanation:

A very fast train starts running from the earth at a speed of 60 miles per hours . How many years will it take to reach Uranus without stopping anywhere?

Answers

Distance between earth and Uranus =2.998×10^9kmSpeed=60mph=60(1.6)=96km/h

Time=Distance/Speed

Time:-

[tex]\\ \rm\hookrightarrow \dfrac{2.998\times 10^9}{96}[/tex]

[tex]\\ \rm\hookrightarrow 0.0312\times 10^9[/tex]

[tex]\\ \rm\hookrightarrow 3.12 \times 10^7hrs[/tex]

The person would have died before reaching Uranus .

7th grade science i mark as brainliest ​

Answers

I feel like it would be incomplete dominance because neither height is the dominant one because they can vary from tall to short.

Students place the end of a wooden board on some books so that the board can be used as an inclined plane. The
students release a ball at the top of the inclined plane and measure the time for the ball to reach the bottom of the
ramp. The students perform three trials. The students then cover the board with a cloth and follow the same
procedure as before. The data are graphed below.
Part A
Describe two forces acting on the ball during the investigation.

Part B
Explain why the ball takes more time to roll down the ramp with a cloth surface.

Part C
Explain why the students repeated the investigation three times.

Part D
Explain how the ball's energy changes as the ball moves down the ramp.

Answers

Friction is the force that opposes motion.

What is friction?

The term friction refers to the force that hinders the movement of a surface over another. The frictional force depends on the nature of the surfaces in contact.

1) The two forces acting on the ball during the frictional force are the forward force and the frictional force.

2) The ball takes more time to roll down the incline in the presence of the cloth because of the increase in friction of the surface.

3) The students repeated the investigation there times in order to ensure accuracy of the results.

4) The energy of the ball changes from potential energy at the top of the ramp to kinetic energy as it rolls down the ramp.

Learn more about frictional force: https://brainly.com/question/1714663

Other Questions
How old was estelle getty when she played sophia petrillo?. Need help finding the solution for this linear equation what is 30 + 12 = e - 42 pls help- 5(u+1)-u=3(u-1)+7No solution? Find the perimeter of the following shape, rounded to the nearest tenth: shape abcd is shown. Point a is at negative 3, 5. Point b is at 1, 7. Point c is at 3, 3. Point d is at negative 1, 1. 12 13. 9 17. 9 20. 1. Which statement provides the best context for understanding thepassage?(A) Germany lagged behind Britain in enacting reforms to improve thelives of industrial workers and the unemployed.(B) The problems of urban industrial workers and the unemployed weremuch worse in Germany than in Britain.(C) The United States led the way in enacting reforms to improve thelives of industrial workers and the unemployed.(D) Industrialization caused greater economic insecurity in the lives ofmany urban workers. The 1920 census of the united states revealed that. Mr Sire purchases a bicycle for $163.62. How much cash will he need to pay? Please help me with this What are some bad and good thigs about lab-grown meat? ASAP Which type of government is run by people who have been elected? (FOR 100 POINTS!!) pls answer if you know it ill mark as brainliestA.ConfederationB.RepresentativeC.ReservedD.Monarchy Find the volume if the cylinder. Round your answer to the nearest tenth. Scientists have difficulty predicting the frequency and intensity of flooding along major rivers, such as the Mississippi, because the increased run-off from impervious surfaces in large human settlements changes how much water flows into rivers. Read this line from "Empire State Building." (It's lonely up here without my big twin brothers, the World Trade Center Towers.) Which fact is most important for readers to know in order to understand the significance of this line? A The World Trade Center Towers were important office buildings. B The World Trade Center Towers were extremely tall.C The World Trade Center Towers fell on September 11, 2001. D The World Trade Center Towers were built in the early 1970s. Helppp pleaseee 10 points If you want to pass a slow moving vehicle you should do what GIVE BRAINIEST!! How have birds adapted to live in the grasslands?A.They shed their feathers to stay cool in the summer months.B.They have keen eyesight to see small insects in the grasses.C.They have shaped beaks that allow them to eat grasses.D.They build and hide their nests in the grasses. ginger still has 40% of her book to read. if she has read 180 pages, how many pages does she still have to read? 1 - 2 + 5 - 2 + 5 x 2 Which option explains the benefit of a newly designed fluid power system in the following scenario? A new fluid power rail system is being designed to travel across a large expanse of China. The new system will have a state-of-the-art hydraulic power system. The new fluid power system will have microstructures in the inner tubing to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to increase friction and allow for more efficient dispersion of the fluid.