Answer:
78 percent nitrogenExplanation:
I hope it's helpful for you
Objects 1 and 2 attract each other with a gravitational force of 12 units. If the mass of Object 2 is tripled, then the new gravitational force will be _____ units.
Explanation:
Fgravity = G*(mass1*mass2)/D².
G is the gravitational constant, which has the same value throughout our universe.
D is the distance between the objects.
so, if you triple one of the masses, what does that do to our equation ?
Fgravitynew = G*(3*mass1*mass2)/D²
due to the commutative property of multiplication
Fgravitynew = 3* G*(mass1*mass2)/D² = 3* Fgravity
so, the right answer is 3×12 = 36 units.
The photo shows a skateboarder pushing her foot against the ground as she rides down a hill.
How does this action cause the skateboarder’s speed to change?
Answer:
A
Explanation:
Down the hill, the net force increases if she pushes more forward.
Answer:
its a im just did the test
Explanation:
A 400 g ball swings in a vertical circle at the end of
a 1.5-m-long string. When the ball is at the bottom
of the circle, the tension in the string is 10 N.
A) what is the speed of the ball at that point?
Answer:
a = 25 m/s2
Explanation:
A = f/m
A = Speed/Acceleration
F =‘Force
M = Mass
Tendency of matter to change in shape, area, volume in response to a change in particular temperature is called
How many states of matter are there?
Answer:
3
Explanation:
state of matter are solid
liquid and
gases
PLEASE HELP!
A 2457 kg car moves with initial speed of 18 ms-?. It is stopped in 62 m by its brakes.
How much work is done by the brakes?
Answer:
Explanation:
The work of the brakes will equal the initial kinetic energy of the car
Fd = ½mv²
F = mv²/2d
F = 2457(18²) / (2(62))
F = 6,419.903...
F = 6.4 kN
Jane plans to fly from Binghamton, New York, to Springfield, Massachusetts, about 280 km due east of Binghamton. She heads due east at 280 km/h for one hour but finds herself at Keene, which is 294 km from Binghamton in a direction 17.8 degrees north of due east. What was the wind velocity
Answer:
90m/h N
Explanation:
we consider janes velocity to the positive X axis so Vj=280km/s
and the final position a dot in on the graph r=294km, we find the x and y components:
294*cos(17.8)=280 X+ confirming our theory
294*sin(17.8)=90 Y+ or N and that's the winds' velocity.
A stone is dropped from the edge of a roof, and hits the ground with a velocity of -150 feet per second. How high (in feet) is the roof
Answer:
how long does it take? we need it to answer ure question
Explanation:
cause we don't know how many feet until we know how long it was falling
If a stone is dropped from the edge of a roof and hits the ground with a velocity of -150 feet per second, then the height of the roof would have been 1148 feet.
What are the three equations of motion?There are three equations of motion given by Newton
v = u + at
S = ut + 1/2 × a × t²
v² - u² = 2 × a × s
As given in the problem, a penny is dropped from a building that is 95 m tall, the initial velocity of the penny is zero, and the acceleration acting is due to the acceleration due to gravity,
By using the second equation of the motion for the vertical motion ,
v² = ( 2 × g ×h )
150² = 2 × 9.8 × h
h = 22500 / 19.6
= 1148 feet
Thus, the height of the roof would have been 1148 feet.
To learn more about equations of motion here, refer to the link given below ;
brainly.com/question/5955789
#SPJ2
help :”)
a skydiver jumps out of a plane and falls for 45 seconds before deploying his parachute. how far did he fall?
Answer:
200 feet
Explanation:
A flywheel having constant angular acceleration requires 4.70 s to rotate through 164 rad . Its angular velocity at the end of this time is 101 rad/s . Find the angular velocity at the beginning of the 4.70 s interval. Find the angular acceleration of the flywheel.
Answer:
A) -31.2 rad/s
B) 28.1 rad/s^2
Explanation:
The linear distance traveled by a wheel of radius 50cm after 99 complete revolutions is?
1)99m
2)210m
3)311
4)433
Answer:
3) 311 m
Explanation:
Circumference = 2πR = π m/rev
99 rev(π m/rev) = 99π m or about 311 meters
The equation for a progressive wave is y=6 cos(20t-4x) What is the equation of another progressive wave which has twice the amplitude and frequency, and moving in the same direction?
The equation of the progressive wave is y = 12 cos(40t - 4x)
The general wave equation is given by:
y = A sin(ωt - kx)
Where A is the amplitude, ω is the angular frequency = 2πf, f is the frequency, k is the wave number and y, x is the displacement.
Given the equation for a progressive wave is y=6 cos(20t-4x). Hence:
The amplitude A = 6,
ω = 20 = 2πf
f = 20/2π = 3.183 Hz
Twice the amplitude = 2 * 6 = 12, twice the frequency = 2 * 3.183.
ω = 2π(3.183*2) = 40
Therefore the other progressive wave has an equation of:
y = 12 cos(40t - 4x)
Find out more at: https://brainly.com/question/12931896
Please help. I'm mot sure what I need to do first...
Answer:
0.80 kN
Explanation:
Hope you understood it
100 J of work was done to lift a 10-N rock and set it at Position A near the edge of a cliff.
1. If the 100 Joules of work lifted the rock to the top of the cliff, how much potential energy did the rock gain?
2. At point C, the rock's potential energy will be
3. The rock's kinetic energy at point A is
4. At point B, some of the rock's potential energy will be changed to Kinetic energy
5. What is the mass of the rock?
6. What is the rock's velocity just before it hits the ground?
The rock to the right is sitting at the top of a ramp. I wonder how much work it required to get that rock up there.
Answer:
lol
Explanation:
When does your body conduct current more readily?
when it is hot
when it is dry
when it is cold
when it is wet
Answer:
When you are wet or you are sweating current passes easily.
Explanation:
wetness increases conductivity. therefore 'when it is wet'.
Use a trigonometric equation to
determine the leg of this triangle.
10 m
[?]
m
30°
Answer:
5m
Explanation:
x=?
[tex]sin30^{0} =\frac{x}{10}[/tex]
[tex]x=10sin30^{0} =10(0.5)=5[/tex]
Hope this helps
What is the best description of the distribution of the galaxies that lie within about 200 Mpc of Earth
Explain why a tiny 1.5 V cell can operate a calculator for a year, while a much larger 1.5 V cell burns out in a few hours in a tiny robot. I WILL CHOOSE BRAINIEST!! PLEASE HELP
The reason why a tiny 1.5 V cell can operate a calculator for a year, but would burn out in a few hours in a tiny robot is because the power demands of the calculator are way less than that of the tiny robot.
What controls how long a cell lasts ?Cell capacity is measured by the amount of Amps and Amp Hour (A.H.) capacity for how long a battery can endure.
On the label or in the user's manual, batteries mention their reserve capability, which specifies the approximate amount of time they can operate between charges. You might notice a shorter or longer battery life if your circuit uses more or less power than this hypothetical circuit. Calculate the battery's entire capacity and divide it by the power of your circuit to see how long it can survive.
Load current, which is influenced by the power of the linked item, influences how quickly the battery's electrical capacity will be used up.
The reason the 1.5 V cell would operate the calculator for a year and yet die in a few hours with the robot is that the robot has a much higher load current than the calculator.
Find out more on cell life at https://brainly.com/question/4503865
#SPJ1
A rock is thrown off a cliff with a speed of 5 m/s downward. How far will it fall after 7 seconds have elapsed?
Free-fall Acceleration is -10 m/s^2
I also need the Formula
Answer:
Explanation:
s = s₀ + v₀t + ½at²
if the throw point is origin and UP the positive direction and ignoring air resistance.
s = 0 + (-5)(7) + ½(-10)(7²)
s = 0 - 35 - 245
s = - 280 m
what are saturated and non saturated vapour?
Answer:
A saturated vapour is one that is in balance with its own liquid. Space is considered to be unsaturated if it contains fewer vapours than the maximum amount it can retain at a given temperature. Saturated vapour pressure is unaffected by volume, although it rises as temperature rises.
Explanation:
please paraphrase this paragraph
As a conclusion we first learned what is Discrete Fourier Transform and
why is it very important in signal processing science as it helps us to convert the discrete signal from time domain into frequency domain and the inverse DFT does the opposite converting the signal from frequency domain back into time domain. We have also learned the difference between DFT and the FFT algorithm where the FFT is an efficient
algorithm created to simplify the DFT process as it is faster and more accurate. We also learned how to perform and implement this algorithm using Matlab,
Answer:
The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.
A car starts from rest and accelerates uniformly over a time of 5.21 seconds for a distance of 110 m. Determine the acceleration of the car.
Answer:
The acceleration of the car is 8.10 m/s²
Explanation:
Given:d = 110 m
t = 5.21 s
vi = 0 m/s
To Find:a = ?
d = Vᵢ × t + 0.5 × a × t²
110 m = (0 m/s) × (5.21 s) + 0.5 × (a) × (5.21 s)²
110 m = (13.57 s²) × a
a = (110 m)/(13.57 s²)
a = 8.10 m/s²
Thus, The acceleration of the car is 8.10 m/s²
-TheUnknownScientist 72
A wheel has a radius of 0.40 m and is mounted on frictionless bearings. A block is suspended from a rope that is wound on the wheel and attached to it (see figure). The wheel is released from rest and the block descends 1.5 m in 2.00 s without any slipping of the rope. The tension in the rope during the descent of the block is 20 N. What is the moment of inertia of the wheel?
Hi there!
We can begin by calculating the acceleration of the block and the wheel using the following equation:
d = vit + 1/2at², where initial velocity = 0 m/s
d = 1/2at²
2d/t² = a
2(1.5)/2² = 0.75 m/s²
Now, we can do a summation of torques:
∑τ = rT
Rewrite using Newton's 2nd Law for rotation:
Iα = rT
Convert α to a using the relationship α = a/r:
I(a/r) = rT
Ia = r²T
I = r²T/a
Plug in the values:
I = (0.40²)(20)/(0.75) = 4.267 kgm²
5) You pull a 10.0 kg wagon along a flat road. You exert a force of 80.0 N at an angle of 30.0 degrees above the horizontal while you move the wagon 10.0 m forward. The coefficient of friction between the wagon and road is 0.500. Calculate the work down by you and the work done by friction.
Can someone solve by showing the steps?
This question involves the concepts of work done and the frictional force.
a. Work done by the person is "692.82 N".
b. Work done by the frictional force is "490.5 N".
a.
Work done by the person can be given by the following formula:
[tex]W=FdCos\theta[/tex]
where,
W = work done by the person = ?
F = Force applied by the person = 80 N
d = distance traveled = 10 m
θ = angle between force and motion = 30°
Therefore,
[tex]W=(80\ N)(10\ m)Cos30^o[/tex]
W = 692.82 N
b.
Work done by the frictional force is given by the following formula:
[tex]W_f=fd\\W_f=\mu mgd[/tex]
where,
[tex]W_f[/tex] = work done by the frictional force = ?
μ = coefficient of friction = 0.5
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]W_f=(0.5)(10\ kg)(9.81\ m/s^2)(10\ m)[/tex]
[tex]W_f=490.5\ N[/tex]
Learn more about frictional force here:
https://brainly.com/question/1714663?referrer=searchResults
Objects 1 and 2 attract each other with a gravitational force of 179 units. If the distance separating objects 1 and 2 is changed to four times the original value (i.e., quadrupled), then the new gravitational force will be ______ units.
Explanation:
Fgravity = G*(mass1*mass2)/D²
G is the gravitational constant throughout the universe.
D is the distance between the 2 objects.
the distance is now quadrupled.
Fgravitynew = G*(mass1*mass2)/(4D)² =
= G*(mass1*mass2)/(16D²) =
= (G*(mass1*mass2)/D²) / 16 = Fgravity/16
the new gravitational force will be 179/16 = 11.1875 units
. A load of 250 kg is hung by a crane’s cable. The load is pulled by a horizontal force such that the cable makes a 300 angle to the vertical plane. If the load is in the equilibrium, calculate the magnitude of the tension in the cable.
If the load is in the equilibrium, the magnitude of the tension in the cable is equal to 1,414.5 Newton.
Given the following data:
Mass of load = 250 kgAngle of inclination = 30°Scientific data:
Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]To calculate the magnitude of the tension in the cable, if the load is in the equilibrium:
First of all, we would determine the tension caused by the horizontal component of the force:
[tex]\sum F_y ; Tcos\theta - mg=0\\\\Tcos\theta = mg\\\\T=\frac{mg}{cos\theta} \\\\T=\frac{250 \times 9.8}{cos30} \\\\T= \frac{2450}{0.8660}[/tex]
T = 2,829.1 Newton
The magnitude of the tension in the cable is given by:
[tex]\sum F_x ; F - Tsin\theta = 0\\\\F = Tsin\theta\\\\F = 2829.1sin30\\\\F = 2829.1 \times 0.5[/tex]
F = 1,414.5 Newton.
Read more on tension here: https://brainly.com/question/18792908
F (N)
4
* 0
3
A
2
FIGURE 2
t(s)
5
0
1
2
3
4
3) A force of magnitude Fx acting in the x-direction on a 2.00 kg particle varies in time as shown
in FIGURE 2. Find
a) The impulse of the force
b) The final velocity of the particle if it is initially at rest
c) The final velocity of the particle if it is initially moving along the x-axis with velocity
of -2.00 ms -1
Answer:
Mark me as brainlist please.
The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A
We have that for the Question "" it can be said that Calculate the moment which must be applied to the handle of the screw to raise the block is
M = 7.30 N.mFrom the question we are told
The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A
Generally the equation for the Block is mathematically given as
[tex]\sum Fy=0[/tex]
[tex]981cos21.80 = R_2cos53.6\\\\R_2=1535N[/tex]
the equation for the Wedge is mathematically given as
[tex]\sum Fx=0\\\\1535cos36.4=Pcos21.8\\\\P=1331N[/tex]
the equation for the Screw is mathematically given as
[tex]\beta = tan^{-1}*\frac{L}{2*\pi*r} \\\\\beta = tan^{-1}*\frac{10}{2*\pi*(15)} \\\\\\beta = 6.06\\\\\theta = tan^{-1}*0.25 \\\\\theta = 14.04\\\\\\Therefore\\\\\theta + \beta = 20.1\\\\[/tex]
Therefore
[tex]M = Pr tan (\theta + \beta)\\\\M = 1331(0.015) tan20.09\\\\M = 7.30 N.m[/tex]
For more information on this visit
https://brainly.com/question/23379286
A 1.5 kg cart is attached to a spring with spring constant of 5 N/m. The cart & spring is pulled to stretch the spring by 3 meters.
What is the SPE?
22.5 J
Explanation:
Given:
x = 3 m
[tex]k = 5\:\text{N/m}[/tex]
The spring potential energy [tex]PE_s[/tex] is
[tex]PE_s = \frac{1}{2}kx^2 = \frac{1}{2}(5\:\text{N/m})(3\:\text{m})^2[/tex]
[tex]\:\:\:\:\:\:\:=22.5\:\text{J}[/tex]
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.150 rev/srev/s . As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight.
What is the radius of the circle in which Jack travels? Treat him as a point mass.
Answer:
Explanation:
At the top of the arc, 3/4 of the acceleration of gravity is use to supply the necessary centripetal acceleration.
0.75g = ω²R
R = 0.75g/ω²
R = 0.75(9.81) / (0.15 rev/s)(2π rad/rev)²
R = 8.283006...
R = 8.28 m