Which of the following statements about atoms is NOT correct? Responses Atoms are electrically neutral when the number of protons are equal to the number of electrons All atoms of a given element must have the same number of protons, neutrons, and electrons Most of the volume of an atom contains only electrons Almost all of the mass of an atom is in the nucleus

The correct answer is to freeze. Option C.

This diffusion effect of water molecules during freezing means that applying pressure to water also lowers its freezing point. With enough pressure which makes it difficult for water molecules to spread out into the solid structure, liquid water is a few degrees below zero degrees Celsius.

When water is placed in a vacuum it freezes slower or faster than water placed in a container or freezer at normal atmospheric pressure. Atmospheric pressure does affect the freezing temperature. The higher the pressure the lower the freezing temperature. For water stored in a tank, its bottom pressure is the weight acting on a unit area of ​​the surface on which the tank is stored.

Learn more about Atmospheric pressure here:-https://brainly.com/question/3083348

#SPJ1

The compound with the highest boiling point is hexanone. Hexanone has the highest boiling point among the following substances at degree Celsius, and its structure is much more compact than that of the other substances.

The temperature at which a liquid's vapor pressure matches that of the surrounding environment's liquid is known as the boiling point. As gas forms below the surface and escapes upwards at this temperature, the liquid starts to bubble.

Important information about an organic compound's structural make-up and physical characteristics can be learned from its boiling point. The boiling point of a chemical can be used to identify and describe the substance. At higher atmospheric pressures, water boils more quickly than it does at lower atmospheric pressures.

To know more about Boiling point visit:

https://brainly.com/question/25777663

#SPJ9

Answer:

In liquids, particles are quite close together and move with random motion throughout the container. Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.

Answer:

Cats are eazy to take care for and relatively affordable

Answer:

cats r better cuz there cats ovi

Explanation:

there small, easy to take care of, and the are good with kids depending on the breed.

H3PO3 - is the formula for phosphorous acid

To learn more about Phosphoric  acid, visit;

https://brainly.com/question/3700851

#SPJ13

Answer: the answer is D

Explanation: hope this helps just did it

In an aqueous solution of ethanol, C₂H₅OH, the molecules that would be present in the solution are ethanol molecules and water molecules.

Aqueous solutions are solutions containing water as the solvent of the solution.

An aqueous solution simply means dissolved in water.

When dissolved in water, ionic compounds dissociate to form ions in aqueous solutions.

Other polar solutes which are non-ionic will simply dissolve in water as a result of the interaction of the polar ends of the molecules. However, no ions will be formed by these polar non-ionic solutes.

For example, a solution of ethanol in water is a non-ionic aqueous solution.

Learn more about aqueous solutions at: https://brainly.com/question/24658038

#SPJ1

Answer:

What does chemistry mean in science?

Chemistry is a branch of natural science that deals principally with the properties of substances, the changes they undergo, and the natural laws that describe these changes.

Explanation:

According to the given statement Summer are usually hot and dry represent climate.

Climate is the usual weather observed over a longer period of time in a certain location. A description of a climate includes specifics like the average temperature in each season, how much rain falls, and how much sun there is. Additionally, descriptions of the extreme are common.

Nearly every area of our life is impacted by the climate, including our food supplies, transport networks, clothing choices, and vacation destinations. It significantly affects our future, our wellbeing, and our means of subsistence. The long-term pattern of the climate in any given location is called the climate.

To know more about Climate visit:

https://brainly.com/question/10440860

#SPJ10

The cigarette smoke as it were is 686 times greater than the standard.

The term concertation is used to describe the amount of substance that is contained in a sample. There are several units that could be used in the measurement of concentration such as;

In this case, the designation 35.0 ppm means 35 units of carbon monoxide in  1,000,000 units, this is the same as saying 3.5 x 10^-5.

Again we have the percent concentration of the sample as 2.40% or 0.024. Hence we would get the number of  times greater than this standard is the CO concentration in cigarette smoke is by;

0.024/ 3.5 x 10^-5

= 686

Learn more about of concentration:https://brainly.com/question/10725862

#SPJ1

According to the given statement 4.64 grams of O₂(g) are needed to completely burn 27.6 g C₃H₂(g).

Chemical equations are symbolic depictions of chemical reactions where the reactants and products are stated in terms of their respective chemical formulae.

Mass of C₃H₂ = 27.6 g

Molar mass of C₃H₂  = 38.05 g/mol

Molar mass of O₂= 32 g/mol

We have to calculate the moles of C₃H₂

moles of C₃H₂ = given mass C₃H₂/molar mass C₃H₂

moles of C₃H₂ = 27.6/38.05 = 0.725 mol

We have to calculate the moles of C₃H₂

The balanced chemical equation is:

C₂Hg (g) + 5O₂(g) → 3 CO₂(g) + 4H₂O(g)

From the reaction, we conclude that

As, 1 mole of C₂Hg react with 5 mole of O₂

So, 0.725 mole C₃H₂ of  react with 0.725/5 = 0.145 mole of O₂

We have to calculate the mass of O₂

Mass of O₂ = Moles of O₂ * Molar mass of O₂

Mass of O₂ = (0.145moles) * (32g/mol) = 4.64g

The mass of O₂ needed is, 4.64 grams.

To know more about Chemical equation visit:

https://brainly.com/question/28294176

#SPJ13

Answer:

6.13, 7.53, 8.13, 10.25, 12.24

Explanation:

Without any KOH, the pH can be calculated using an ICE table (initial, change, equilibrium). I will assume that the pka is 7.53 since that's the value that wikipedia gives
after setting up the table the equation left should be:
[tex]\frac{x^2}{0.19-x} = 2.95*10^{-8}[/tex] - original equation
the equation can be simplified to [tex]\frac{x^2}{0.19} = 2.95*10^{-8}[/tex] since if x is really small, (0.19-x) will be pretty much equal to 0.19
solve to get x = 7.49*10^-7, and since [tex]\frac{7.49*10^{-7}}{0.19}[/tex] is very small, we don't have to calculate x with the original equation instead of approximating it with the simplified equation
since x = [H3O+], -log(x) would give us the ph, so the pH would be

-log(7.49*10^-7) = pH = 6.13

For the other problems, calculate the number of moles of each of the components
in total, we have 0.05*0.19 moles of HClO, which is 0.0095 moles.
after adding 0.025*0.19 moles of KOH (0.00475 moles), there would be 0.0095-0.00475 moles of HClO left, and 0.00475 moles of ClO- would be generated. The concentrations of both ClO- and HClO are both about equal to 0.00475/0.075 (0.075 is the total amount of liquid after adding 25 ml of KOH). The fraction simplified to 0.0633
Using the equation
pH = pKa + log([A-]/[HA]), we would get pH = 7.53 + log(0.0633/0.0633)
so pH = 7.53 after 25 mls of KOH has been added

Do a similar thing for 40 mls of KOH being added.

pH = 7.53 + log(0.0844/0.0211) = pH = 8.13

For 50 mls, an ICE table needs to be used again since the moles of base and acid are roughly equal.

The resulting solution should be equal to adding
0.05*0.19 moles of KClO to water, which would be a 0.05*0.19/0.1 molar concentration, or 0.095M
Set up an equation and use ICE:
[tex]ClO^-+H2O = > HClO + OH^-[/tex]
the Kf of this equation can be calculated by rearranging this reaction and utilizing the equation for the auto-ionization of water
[tex]HClO + H2O = > H3O^+ + ClO^-[/tex] with a Ka of 2.95*10^-8

flip the reaction to get:
[tex]H3O^+ + ClO^- = > HClO + H2O[/tex] and the Ka is 1/(2.95*10^-8) , or 33898305.1

Use the equation:
[tex]2H_2O = > H_3O^+ + OH^- , \ \ \ \ K_w = 10^{-14}[/tex]
and add the equations

[tex]2H2O + H3O^+ + ClO^- = > HClO + H2O + H3O^+ + OH^-[/tex]

the K for this equation is just 33898305.1 times 10^-14
which is 3.39*10^-7
the equation can have terms present on both sides of the equation canceled out to get
[tex]ClO^-+H2O = > HClO + OH^-[/tex] with a K of 3.39*10^-7

Set up the ICE table once more, note that the ClO- concentration is 0.095

x^2/(0.095-x) = 3.39*10^-7
approximate the equation to be:
x^2/(0.095) = 3.39*10^-7
solve for x = 0.00017945 = [OH-]
the pOH would be 3.746, and since 14 = pH+pOH,
14 = pH + 3.746
pH = 10.25

For the final equation it is much simpler. Since the moles of strong base is more than the moles of acid, the pOH can be calculated by just taking the -log of the excess base, which is 0.01*0.19 moles, or 0.01*0.19/(0.11) molar solution
The concentration of OH is 0.01*0.19/(0.11), which is 0.0173.
-log(0.0173) = pOH
pOH = 1.76
pH = 1.76 = pH = 12.24

The following graph shows water solubility of some salts versus temperature curves on the chart shows the melt that has the largest solution temperature is the curve b

Water solubility is the because of its polarity and ability to form hydrogen bonds and also water makes an excellent solvent means it can dissolve so many kind of molecules

Here given graph shows water solubility of some salts versus temperature and in that curve a, c and d  show the low temperature but b curve show almost high temperature and that's why the melt that has the largest solution temperature and also has a positive sign and curve c and d are show constant water solubility and curve b shoe first high then low and then more high that's why the curve b has the largest temperature

Know more about temperature

https://brainly.com/question/3834694

#SPJ1

Answer:

Guys’ search it up on math thank me later

Explanation:

dhsjdjsusysgtjghtd fjfhfhcchdh

CO 2

H ₂0

To learn more about : chemical compounds

Ref : https://brainly.com/question/26487468

#jsp2

From the calculation, we now obtain the molarity of the sulfuric acid to be 5.8 Mol/L

The term concentration is defined as the ratio of the number of moles to the volume of the solution. We know that unit of the molarity of the solution is the moles per liters.

We know the following;

Mass of the acid =  571.6 g

Volume of the acid = 1.000 x 10^3 ml or 1 L

Molar mass of the acid = 98.08 g/mol

Hence;

Number of moles of the acid = 571.6 g/98.08 g/mol = 5.8 moles

Molar concentration of acid = 5.8 moles/ 1 L

= 5.8 Mol/L

Learn more about concentration:https://brainly.com/question/10725862

#SPJ1

Answer: 74.54kg

Explanation:

Gasoline is 0.79 g/mL

1Kg/1000g x 0.79g/mL x 1000mL/1L x 1L/1.06 quarts x 4 quarts/1gallon x 25 gallons

1 x 0.79 x 1000 x 1 x 4 x 25  divided by 1000 x 1 x 1 x1.06 x 1 =74.54Kg

The molarity of a CaCl₂ solution that is prepared by dissolving 27.1 g of CaCl₂ in sufficient water to give 779 mL of solution is 0.31M.

Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.

The molarity of a substance can be calculated by dividing the number of moles of the substance by the volume.

According to this question, 27.1 g of CaCl₂ is dissolved in sufficient water. The number of moles can be calculated as follows:

moles = 27.1g ÷ 110.98 g/mol

moles = 0.24mol

Molarity of CaCl₂ = 0.24mol ÷ 0.779L

Molarity of CaCl₂ = 0.31M

Therefore, 0.31M is the concentration required to prepare by dissolving 27.1 g of CaCl₂ in sufficient water.

Learn more about molarity at: https://brainly.com/question/16727614

#SPJ1

We can use the law of ideal gases to solve this question.

The law of ideal gases is represented by the following formula:

Where P is the pressure, v is the volume, n is the number of moles, R is the ideal gas constant and T is the temperature.

The first step is to convert kPa to atm, °C to K and mL to L.

Now, we can use these values to find n, which is the amount of moles of the gas:

The answer is 0.00264 moles of chlorine are released.

The moles of SO₂ formed if you have 467.2 g of ZnS and excess O₂ is 4.79 moles.

The balanced chemical reaction of the give equation is-

2 ZnS(s) + 3 O₂(g) → 2 ZnO(s) + 2 SO₂(g)

What is mole?

Mole is defined as fundamental measurement unit which is used to measure the amount of substance.

Number of moles of ZnS = Given mass

                                             Molar mass

Moles of ZnS = 467.2 g

                          97.47 g/mol

Moles of ZnS = 4.79 moles

From the reaction, we know that

2 moles of ZnS forms 2 moles of SO₂

4.79 moles of ZnS forms 2 x 4.7 moles of SO₂

                                         2

Moles of SO₂ = 4.79 mol

Hence, the moles of SO₂ can be formed is 4.79 moles.

To learn more about moles,

brainly.com/question/14752673

#SPJ1

Answer

Moles = 1.22 moles

Explanation

Given

Mass of water = 22 g

We know the molar mass of water = 18,01528 g/mol

Required: Moles of H2O

Solution

To calculate the number of moles, use

n = m/M where n is the moles, m is the mass and M is the molar mass

n = 22g/18,01528 g/mol

n = 1.22 mol

Answer:mole =22gm/ 18gm = 1.22moles

Explanation:A mole is calculated by dividing the given weight from molecular weight of the compound. In this case Molecular weight of H2O = 18 grams. So answer is 22/18= 1.22

A reaction that starts with 10 g platinum, 180 mL 5 M HCl, and 223 mL 6.55 m [tex]HNO_3[/tex] will produce 20.9 grams of [tex]H_2PtCl_6[/tex].

First, let's look at the equation of the reaction:

[tex]3 Pt + 4 HNO_3 + 18 HCl -- > 3 H_2[PtCl_6] + 4 NO + 8 H_2O[/tex]

The mole ratio of Pt, [tex]HNO_3[/tex], and HCl from the balanced equation of the reaction is 3:4:18.

Mole of 10 g platinum = 10/195

                                     = 0.051

Mole of 180 mL, 5 M HCl = 180/1000 x 5

                                    = 0.9 moles

Mole of 223 mL, 6.55 M [tex]HNO_3[/tex] = 223/1000 x 6.55

                                        = 1.46 moles

Considering the mole ratio, HCl seems to be in excess while both platinum and [tex]HNO_3[/tex] are limiting.

Mole ratio of platinum and [tex]H_2PtCl_6[/tex] = 1:1

Equivalent mole of [tex]H_2PtCl_6[/tex] that is produced = 0.051 moles.

Mass of 0.051 mole platinum = 0.051 x 409.81

                                             = 20.9 grams

Thus, the amount of [tex]H_2PtCl_6[/tex] that would be formed is 20.9 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/15047541

#SPJ1

The density of a solution with a mass of 5,780.1 ng and a volume of 995 gallons is calculated as 5.736. Grams per cubic centimeter can be stated as SI unit of measurement for density.

Either you have to measure the solid's dimensions or measure the liquid's volume using a measuring jug. To get a number in meters cubed, convert any necessary units.

Further in order to determine the mass of the object or material, place it on a scale.

Density is the mass of a material or substance that is calculated per unit volume. d = M/V, where d can be stated as density, M as mass, and V as volume, that is the formula for density.

The amount of "stuff" is contained in a specific quantity of space is determined by its density. For instance, a block of the harder, lighter element gold (Au) will be denser than a block of the heavier element lead (Pb) (Au).

Styrofoam blocks are less dense than bricks. Mass per unit volume is how it is defined.

Typically, there are two forms of density: absolute density and relative density. Relative

Density = m/v

= 5780.1/995

= 5.736

To know more density visit:

https://brainly.com/question/952755

#SPJ9

The term mole concept is used here to determine the molar mass of an element. The molar mass of the element is 80.62 g/ mol.

One mole of a substance is that quantity of it which contains as many particles or entities as there are atoms in exactly 12 g of carbon -12. The equation which is used to calculate the number of moles is:

The mass of one mole of molecules of a substance is defined as the molar mass. It is generally expressed in g mol⁻¹

Number of moles = Given mass / Molar mass

Here the given mass of the element is 10.4 g. The number of moles of the element is 0.129 mole. Then the molar mass is:

Molar mass = Given mass / Number of moles

= 10.4 g / 0.129 mol

= 80.62 g/ mol

Thus the molar mass of element is 80.62 g/ mol.

To know more about moles, visit;

https://brainly.com/question/30307377

#SPJ2

Answer:

that is some above

Explanation:

because of the chemical reaction

a) 2Al (s) + 6HCl (aq) → 2AlCl3 (aq) + 3H₂ (g)

b) 2C10H8 (s) + O2 (g) → H₂0 (1) + CO2 (g)

c) 2 Na2SO4 + 2 BA(NO3)2 → 2 BA(SO4) + 2NANO3

d) CaCO3 + heat → CaO + CO2

This are the Balanced Chemical equations.

The chemical equation can be said to as a balanced one if there are no inequalities. Every element in this illustration of a balanced equation has the same number of atoms on the reactant and product sides.

Chemical equation that is balanced is described as one in which the number of atoms of various elements on the reactants side (left side) and that on the product side (right side) are equal.

The reactants and products are now placed on the left and right sides of the arrow, respectively so that they create a balanced equation. Coefficients, that appear as a number before any kind of chemical formula, represent moles of a compound.

To know more about balanced chemical equation, visit:

https://brainly.com/question/28294176

#SPJ9

The engineer determining the effectiveness of a new machine that produces ammonia from hydrogen and nitrogen is an example of a) Manufacturing and testing a prototype.

Ammonia can be obtained using the process called Haber's process. In designing a machine for manufacturing ammonia, a series of steps are to be taken. The first step is to identify the problem and the second is to find solutions to the problem.

To make the solutions obtained to be in practice, the third step includes drafting a strategic plan and design. After obtaining the design the last step is to test the design for its efficiency.

In the case of the machine designed for manufacturing Ammonia, determining the effectiveness of the machine could be tested by manufacturing and testing a sample.

Hence, the correct option is a).

To know more about Haber's process, click below:

https://brainly.com/question/21867752

#SPJ1

I fell confident that I can identify the different rates of chemicals.

This is known to be be a powerful diagnostic tool and it is called a reaction's rate. It is one that is seen when we can create methods to increase production by understanding how quickly items are made and what slows down reactions.

Therefore, reaction rate, in regards to chemistry, is seen as the speed with which a said or given chemical reaction moves or functions.

Learn more about reaction rates from

https://brainly.com/question/1898560
#SPJ1

The formula for the base dissociation constant (Kb) is Kb = [NH4+][OH-]/[NH3].

Kb is a temperature-dependent constant that is typically calculated at 25 degrees Celsius. Ammonia has a Kb value of 1.8E-5 (the notation "E-5" stands for "ten in power -5").

A basic solution is created when ammonia and water are combined. Ammonium hydroxide is created when a little amount of dissolved ammonia combines with water. This compound then breaks down into ammonium and hydroxide ions.

A material that absorbs hydrogen ions or protons in solution is referred to as a base. The base dissociation constant is the equilibrium constant for the equilibrium created when a weak base interacts with water.

To know more about ammonia :

https://brainly.com/question/14672082

#SPJ9