Answer:
Flash Drive, External Hard Drive, and a CD and DVD.
thank god whoever made these questions didn't ask you about a floppy
Answer:
The portable devices are:
External Hard Drive
Flash Drive
CD and DVD
Explanation:
Portable devices are those devices that can be moved with ease from one place to another.
Let us look at the devices one by one
Internal Hard Drive
As internal hard drive is fixed inside the system unit of the computer it cannot be moved easily. So internal hard drive is not portable.
External hard drive, Flash drive, CD and DVD are portable as they are not fixed and are compact in size so they can be moved easily.
Hence,
The portable devices are:
External Hard Drive
Flash Drive
CD and DVD
What is output? Select all that apply.
C = 0
while (c 10):
C = c + 5
print (c)
Answer:
The answer is:
5
10
Explanation:
In the while loop, we specify, if C is not equal to 10, C += 5 and print(c). When python reads the loop, python will check to see if C is equal to 10 and if not it will add 5 until C is more than or equal to 10. In addition, python will print(c) to the console until it hits 10. Once C is less than or equal to 10 the loop will stop. In this scenario, since we print c in the loop, the codes output will be the following:
5
10
hope this helps :D
How many RTTs does it take until the sender's congestion window reaches 2M bytes? Recall that the congestion window is initialized to the size of a single segment, and assume that the slow-start threshold is initialized to a value higher than the receiver’s advertised window.
The question is incomplete, Below is the complete question.
Suppose that you are using an extended version of TCP that allows window sizes much larger than 64K bytes.1 Suppose you are using it over a 1Gbps link with a round-trip time (RTT) of 200ms to transfer 16M-byte file, and the TCP receiver's advertised window is 2M bytes. If TCP sends 1K-byte segments, and assuming no congestion and no lost segments:
(a) How many RTTs does it take until the sender's congestion window reaches 2M bytes? Recall that the congestion window is initialized to the size of a single segment, and assume that the slow-start threshold is initialized to a value higher than the receiver’s advertised window.
(b) How many RTTs does it take to send the file?
(c) If the time to send the file is given by the number of required RTTs times the RTT value, what is the effective throughput for the transfer? What percentage of the link capacity is utilized?
Answer/Explanation:
(A)
When;
RTT0 = 1KB
RTT2 = 4KB
RTT1 = 2 KB
RTT3 = 8KB
RTTn = 2nKB.......
We need n = 11 to have 2 MB = 211.
With that, the window size will become 2MB after 11 RTTs.
(B)
By the 11th RTT 2MB have been transmitted and the window is 2MB, then, by the end of the 12th RTT,2MB have been transmitted and the window is now 2MB. Similarly during the next 3 RTTs, another 2MB will be transmitted, 4MB and another 2MB, thus 15 RTTs is needed to transmit the entire file.
c) Effective throughput for the transfer is the file size over the needed time i.e,
= 8 * 16Mb / (15 * 200 * 10-3)
which is;
= 144 / 3000 * 10-3
Then;
= 144 * 103 / 3000
And;
= 48 Mbps(Megabit per second)
Bandwidth Utilization = effective throughput / Available link speed
= 48 / 1024
= 0.0468
= 4.68 %
MB = MegaBytes
while
Mb = Megabits
Write code to complete RaiseToPower(). Sample output if userBase is 4 and userExponent is 2 is shown below. Note: This example is for practicing recursion; a non-recursive function, or using the built-in function pow(), would be more common.
4^2 = 16
#include
int RaiseToPower(int baseVal, int exponentVal){
int resultVal = 0;
if (exponentVal == 0) {
resultVal = 1;
}
else {
resultVal = baseVal * /* Your solution goes here */;
}
return resultVal;
}
int main(void) {
int userBase = 0;
int userExponent = 0;
userBase = 4;
userExponent = 2;
printf("%d^%d = %d\n", userBase, userExponent, RaiseToPower(userBase, userExponent));
return 0;
}
Answer:
Replace /* Your solution goes here */ with
RaiseToPower(baseVal, exponentVal-1);
Explanation:
From the question, we understand that the program uses recursion.
The essence of recursion is to call a function from the function itself.
This is done by RaiseToPower(baseVal, exponentVal-1);
Because it passed the baseVal and the exponentVal reduced by 1 to the RaiseToPower function.
This is repeated until exponentVal = 1.
However, I've added the full program as an attachment where I used comments to explain some lines.
In this exercise we have to use the knowledge of computational language in C++ to write the code.
This code can be found in the attached image.
To make it simpler the code is described as:
#include<iostream>
#include<stdio.h>
int RaiseToPower(int baseVal, int exponentVal){
int resultVal = 0;
if (exponentVal == 0) {
resultVal = 1;
}
else {
resultVal = baseVal * RaiseToPower(baseVal, exponentVal-1);
}
return resultVal;
}
int main(void) {
int userBase = 0;
int userExponent = 0;
userBase = 4;
userExponent = 2;
printf("%d^%d = %d\n", userBase, userExponent, RaiseToPower(userBase, userExponent));
return 0;
}
See more about C code at brainly.com/question/19705654
Why do people create web pages?
Answer:
To grab peoples attention
Explanation:
Answer:
People create web pages to share their passion for whatever they do. People create them to sell buisness products too.
Explanation:
I hoped this helped.
which of the following reflects the order of operations
Answer: PEMDAS
Parenthesis, Exponents, Multiplication, Division, Addition, Subtraction
Explanation:
Do you think the divide will fade in time? Write your opinion
Answer:
The answer is "true".
Explanation:
When ICTs are becoming more daunting and easier, that violation may eventually subside. However many people have reasons to believe that even in fact the racial literacy will persist, and even grow.
It is constantly shrinking by 5% every year in terms of raw figures, and increasing estimates show that just by 2028 100% of the world's population will have access to the internet.
PLEASE HELP ASAP! BRAINLIEST TO BEST ANSWER!
Use the drop-down menus to set a password to encrypt a presentation.
1. Save a backup copy of the original file.
2. Go into the (A. Home tab, B. Trust canter, C. Backstage view) in the File tab, and select ( A. Check for issues, B. Protect presentation, C. Presentation permissions)
3. Type in a password. Then, (A. Reenter, B. Strengthen) the password, and save the new file.
4. Keep the password in a safe place.
Answer:
1. Save a backup copy of the original file.
2. Go into the ✔ Backstage view in the File tab, and select ✔ Protect Presentation .
3. Type in a password. Then, ✔ reenter the password, and save the new file.
4. Keep the password in a safe place.
Explanation:
The password to a presentation for encryption is added from the backstage view of the file tab with to protect prestation option.
Why to encrypt a presentation?The encryption to a presentation is given as the setting of password to open it in order to protect the data, and enhance the security of it.
The encryption to the presentation is performed with the following steps:
A backup copy of the original question is saved.In the backstage view of the file tab, protect presentation option is selectedThe password is typed, and then reentered to save the new file.The password is kept at the safe location.Learn more about presentation, here:
https://brainly.com/question/14621266
#SPJ2
the celestial sphere is divided into
1. 88 different areas that identify, name, and plot the celestial objects.
2. 44 different areas that identify, name, and plot the celestial objects.
3. 22 different areas that identify, name, and plot the celestial objects.
4. constellations, such as Orion, Rigel, and Sirius
Answer:
A.
Explanation:
Can someone please help me?m
Answer:
(_(
Explanation:
Which of the following features can be found on the LMS home page?
(Select all that apply.)
A. Log in to the LMS
B. Review the FTI calendar
C. Acces the FAQs
D. Watch videos
E. Follow FTI social media
Corey set up his presentation for delivery to his team.
Answer:
If Corey wants to control the pacing of his presentation, he should adjust his playback settings. In the playback settings, he should select the default setting under "type;" this will allow him to change slides anytime. He should also click the check box under "options" that says "Change slides manually" so he can simply click on the slide whenever he is ready to move on to another slide.
Explanation:
If you don't like that answer, here's another one:
Corey knew he would need a lot of time to explain each point and that his team members would have lots of comments and questions. The best way that Corey should set up his slide show would be to make sure that he has an outline. Also, there should only be one thought per slide (never mix it). It has to be taken into account that he should have fewer words and more images/graphs.
in what domain electrica energy is the most use
Answer:the main signal bearing entities are voltage and their current in circuit environments.
Explanation:
What are two options available for highlighting changes in the Highlight Changes dialog box?
A) for a specific website or by a specific user
B) by a specific user or in a specific file format
C) in a specific file format or for a specific website
D) within a specific time period or by a specific user
Answer: D
Within a specific time period or by a specific user
Explanation:
Answer:
D)
Explanation:
within a specific time period or by a specific user
What is the output?
numB = 25
while numB > 13:
numB = numB - 5
print(numB)
Output:
Answer:
The answer is 10
Explanation:
i got it right on the assignment
Answer: 10
Explanation: got it right on edgen
Suppose we have a 4096 byte byte-addressable memory that is 32-way high-order interleaved, what is the size of the memory address module offset field?
a. 10
b. 7
c. 5
d. 4
Answer:
7
Explanation:
Given that :
Byte-addressable memory = 4096
Order = 32
Rwqritying such that they have the same base ;
4096 = 2^12
32 = 2^5
2^12 - 2^5
12 - 5 = 7
To create an SSL connection, a Web server requires a ________, which is an electronic document that confirms the identity of a website or server and verifies that a public key belongs to a trustworthy individual or company.
a. DSL Degree
b. SSL Degree
c. SSL Certificate
d. DSL Certificate
Answer:
c. SSL Certificate
Explanation:
The full form of SSL is Secure Sockets Layer. It is the standard security technology which establishes the encrypted link between a client and the server—typically a web server (which is the website) and the browser, or the mail server along with a mail client (for e.g., Outlook).
In the context, in order to develop an SSL connection, an SSL Certificate is required by the Web server.
True or False:
You can convert your PowerPoint presentation in web pages.
Answer:
true
Explanation:
by what other name can the folders in Windows 7 be called?
I think document folder
The other name for the folders in Windows 7 be called as Directories.
What is Windows 7?The Windows 7 operating system (OS) was made available for purchase in October 2009 to replace Windows Vista. Windows 7 was created as an update to the Windows Vista operating system and is based on the Vista kernel. It makes use of Windows Vista's original Aero user interface (UI).
The folder of the Windows 7 is also called as files, other folders, directory etc.
Additionally, folders enable you to have several files with the same name. The person might have a file named Resume.doc in your My Documents folder and a different file named Resume.doc in a folder called Resume templates, for example. Every file would require a distinct file name if they were all in one location.
Therefore, it can be concluded that The other name for the folders in Windows 7 be called as Directories.
Learn more about Windows 7 here:
https://brainly.com/question/1285757
#SPJ2
Derek has to create a technical design of a complex floor plan using CAD. What will be most helpful for Derek to use to create the design?
OA layers
OB. scale
O c. units
OD. file formats
Answer: A: Layers
Explanation: It is correct on PLATO
The replacement policy that can be implemented in practice and performs the best among the replacement policies that can be actually coded is:
Answer:
The answer is "Least recently used policy".
Explanation:
It is the page replacement policy, which uses a less frequent substitute. It adds a registry from each frame that includes the last time the program, that views within the frame, and use a "logical clock" for each of the data references, that made to change by a tick.
This replacement strategy is often used to substitute its least currently utilized cache line or page, and it is realistic and best implemented among the substitution policies.
HOW TO BE A EXPRET PLAYING AMONG US
Answer:
Just keep playing
Explanation:
That’s so how
Answer:
If inposter look afk and they will think you are afk and vote everyone else out
(;
The file includes 4993 tweets including the keyword 'election'. Each tweet is represented in a separate line. Write a program to open the file and read through its lines, then only if a tweet includes a hashtag (a term beginning by the
Answer:
import re
with open("../../Downloads/Tweets.txt","r", encoding="utf-8") as tweets:
myfile = tweets.readlines()
for item in myfile:
item = item.rstrip()
mylist = re.findall("^RT (.*) ", item)
if len(mylist) !=0:
for line in mylist:
if line.count("#") >=1:
ln = line.split("#")
dm = ln[1]
print(f"#{dm}")
Explanation:
The python source code filters the document file "Tweets" to return all tweets with a hashtag flag, discarding the rest.
Which Tab contains the paragraph attributes?
A. Home
B. Insert
C. Review
D. View
PLs help
Award: 15pts
Answer:
Insert
Explanation:
Kristen wants to view the records of her database in ascending order. What should she do?
OA. Index the report
OB. Create a table
OC. Sort the table
OD. Create a report
the answer is Sort the table
Protected members of a base class are like ________, but they may be accessed by derived classes. a. constructor functions.b. static members.c. private members.d. public members e. none of these.
Answer:
C). private members
Explanation:
These are options
a. constructor functions
b. static members
c. private members
d. public members
Protected members can be regarded as member that accessibility of them from outside the class is zero, they can only get accessibility from derived classes, though this is not applicable to private class. It should be noted that Protected members of a base class are like private but they may be accessed by derived classes.
Do you think the divide will fade in time. Write your opinion.
Hello. Your question is incomplete and without context, which makes it impossible for it to be satisfactory and satisfactory. However, I will try to help you in the best possible way.
For you to have an opinion on whether the division may disappear over time, you must analyze the composition of that division and how it was created, based on this analysis, you can reflect on whether the composition of the division in the environment in which it is located is likely to be temporary, or if it is impossible to determine the period of time for which it will remain active.
What is the size of an iPad Air 2 when rotated
size of ipad air 2 is 360degree
Program that take 3 number and display them in ascending order c++
Answer:
#include <iostream> // std::cout
#include <algorithm> // std::sort
#include <vector> // std::vector
using namespace std;
int main()
{
vector<int> myvector{ 8, 1, 3 };
std::sort(myvector.begin(), myvector.end());
for (int x : myvector)
cout << x << " ";
}
Explanation:
Use STL libraries where you can to keep your code robust!
ANIMATION QUESTION
In the you tube animation "The Heavy Is Ded" the Heavy is supposedly "Ded" but throughout the video, he clearly isn't ded, can anyone explain how on earth this is possible, because this should be impossible since the Heavy is ded
Answer:
I think my old acc got deleted again..........
Explanation:
I love u here is a meme
Write a function writel that will write the length of a side of a square. If only one argument is passed to the function, it is the length, and the output will go to the Command Window. If two arguments are passed, however, the first argument will be the length and the second argument will be the file identifier for an output file to which the length should be printed.
def writel(length, file_name = ""):
if file_name!="":
f = open(file_name, "w")
f.write(str(length))
f.close()
else:
print(str(length))
writel(3, "FileName.txt")
I hope this helps!
Remember, you must have the file created prior to running this program. Best of luck.
Answer: Answer to this question for MatLab
Explanation:
function out = write1(length,varargin)
if nargin == 1
disp(length)
end
if nargin == 2
fid = fopen(varargin{1},'w');
fprintf(fid,'%d',length) %
fclose(fid);
end
end
%varargin{1} needs to be the name of a file you already created