Answer:
The Visible Spectrum Visible light is the light that we can see, and thus is the only light detectable by the human eye. White light is visible light, and it contains all the colors of the rainbow, from red to violet. The range of visible wavelengths is 400 to 700 nanometers.
Explanation:
In an experiment, two unknown compounds (one an ether and the other an amine) of equal molecular mass were dissolved in water. The result of the experiment is shown in the table.
Solubility Comparison
Unknown Compound Solubility (g/100 ml water)
A 4
B 0.25
Which of the following correctly explains the identity of Compound A and its solubility?
It is an amine; it contains a nitrogen atom that will allow nitrogen-hydrogen bonds to form while in water.
It is an ether; because the oxygen atom is within the carbon chain, so it is free to form oxy-hydrogen bonds to make it more soluble.
It is an ether; the high polarity of the oxygen-hydrogen bond makes it more soluble.
It is an amine; because the lower electronegativity of N than H makes it more soluble.
Answer:
It is an amine; it contains a nitrogen atom that will allow nitrogen-hydrogen bonds to form while in water.
Explanation:
The solubility of amines owes largely to the electronegativity difference between nitrogen and hydrogen. Remember that when hydrogen is bonded to highly electronegative element such as nitrogen, intermolecular hydrogen bonding is possible with water molecules. This explains the greater solubility of amines in water.
Ether molecules do have an oxygen atom, however, and engage in hydrogen bonding with water molecules to a lesser extent compared to amines.
Also, amines participate in some acid-base reactions that lead to the formation of diethylammonium hydroxide, an ion which leads to a greater solubility of amines compared to an ether.
Hence, compound A is an amine.
What is the density of a piece of wood that has a mass of 25.0 grams and a volume of 5.0 cm 3 ?
Answer:
5.0g/cm^3
Explanation:
Since we have the mass of the wood (25.0g) and the volume of the wood (5.0cm^3), can use the formula for density to answer this question.
Density=mass/density
Density=25.0g/5.0cm^3
Density=5.0g/cm^3
Therefore, the density of the piece of wood is 5.0g/cm^3.
I hope this helps!
Help pleaseeeeeeeee with this question
Answer:
(C) Vacuum
Explanation:
PLEASE HELP MY TEACHER IS GOING TO SEE ME AFTER CLASS
Answer:
The Nucelous helps prevent bad cells in
Explanation:
who want to play among us
Answer:
Meh i want to play
UwU
:)
Answer: yeah sure lad
Explanation:
If the specific heat of water is 4.18 3/g*^ C much heat is required to increase the temperature of 12 g of water from 23 degrees * C to 39 degrees * C ^ 2
Answer:
Q = 802.6 J
Explanation:
Given data:
Specific heat capacity of water = 4.18 J/g.°C
Mass of water = 12 g
Initial temperature = 23°C
Final temperature = 39°C
Heat required = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 39°C - 23°C
ΔT = 16 °C
Q = 12 g× 4.18 J/g.°C × 16 °C
Q = 802.6 J
Which of the following best describes foliated metamorphic rocks?
A
There are easily recognizable fossils.
B
The rock has ribbon-like layers of bands.
C
They have crystals like igneous rocks.
D
Different sized sediments can be seen.
Answer:
It's C because Metamorphic rocks were once igneous rocks. And, because Gneiss which is a Metamorphic rock has crystals inside of it.
Different rock types appear during rock formation. The best description of foliated metamorphic rocks is that;
B . The rock has ribbon-like layers of bands.Due to the pressure and heat that is exerted on some rock types, there is an alignment or foliation of rocks. The appearance can be described as ribbon-like.
The examples of rocks that fall under this classification are slate, phyllite, gneiss, and schist.
The non-foliated rocks do not show any alignment in their minerals. Examples are; quartzite, marble, and novaculite.
Summarily, option B best describes a foliated metamorphic rock.
Learn more here:
https://brainly.com/question/21979222
In carbon dioxide (CO2), there are two oxygen atoms for each carbon atom. Each oxygen atom forms a double bond with carbon, so the molecule is formed by two double bonds.
Two double bonds means that the total number of electrons being shared in the molecule is
two.
four.
six.
eight.
Answer: D) Eight
Just pretend this part doesn't exist nope nothing to see here the answer is correct on edge2020 I swear on my brainly points
Answer:
d
Explanation:
How many total atoms are present in C6H12O6?
Answer:24 atoms
Explanation:
Answer: 24 atoms
Answer and Explanation:
There are 24 atoms in one molecule of C6 H12 06. This chemical compound has 6 atoms of carbon, 12 atoms of hydrogen, and 6 atoms of oxygen.
Hope this helps.... Stay safe and have a Merry Christmas!!!!!!! :D
Which of the three goals of Persuasive Speaking is the hardest to achieve?
a.
weaken attitudes, beliefs or values
b.
strengthen attitudes, beliefs or values
c.
change attitudes, beliefs, or values
d.
motivate to action
Answer:
C
Explanation:
edge2021!!
Answer: The correct answer is c. change attitudes, beliefs or values.
Explanation:
Of these goals, the hardest to achieve is changing attitudes, beliefs, and values. It is difficult to convince an audience to truly change their attitudes, beliefs, or values based on your presentation since it typically requires establishing trust and respect on a personal level.
Why does oxygen have a smaller atom size than nitrogen?
Answer:
The eight protons in oxygen atom's nucleus will exert more force than nitrogen's seven electrons. Also, oxygen has same number of shells as nitrogen. Thus electrons in oxygen atom will be closer to nucleus than in the case of nitrogen. When electrons are closer it means atomic radius is smaller.
Hope this helps! :)
here's the answers.................
need help with this.............................................
Answer:
fossil layers
Explanation:
How many moles of gas at 58° C does it take to fill a 1.75 L flask to a pressure of 12.5 kPa? Please help I will give brainliest
Answer:
0.008 moles of gas are present
Explanation:
Given data:
Volume of gas = 1.75 L
Number of moles = ?
Temperature of gas = 58°C
Pressure of gas = 12.5 KPa
Solution:
The given problem will be solve by using general gas equation,
PV = nRT
P= Pressure
V = volume
n = number of moles
R = general gas constant = 0.0821 atm.L/ mol.K
T = temperature in kelvin
Now we will convert the temperature.
58+273 = 331 K
Pressure = 12.5/101 = 0.12 atm
by putting values in formula:
0.12 atm× 1.75 L = n× 0.0821 atm.L/ mol.K ×331 K
0.21 atm.L = n× 27.17atm.L/ mol
n = 0.21 atm.L /27.17atm.L/ mol
n = 0.008 mol
Which reason best explains why metals are malleable?
A. because they have delocalized electrons
B. because they have localized electrons
C. because they have ionic bonds
D. because they have rigid bonds
The correct answer is A on edg 2020
The tungsten- nuclide radioactively decays by alpha emission. Write a balanced nuclear chemical equation that describes this process.
Answer:
The solution to this question can be defined as follows:
Explanation:
The complete question is defined in the attached file.
[tex]W^{180}_{74} \to He^{4}_{2} + Hf^{176}_{72}[/tex]
Here:
[tex]W= Tungsten-180\\\\Hf =Hafnium\\\\He = \alpha \ particle\\\\[/tex]
Atom and Periodic table vocabulary:
1. The mass on the periodic table.
2. Particles that differ in number between isotopes.
3. Vertical column in the periodic table.
4. Atoms of the same element that have different masses.
5. All elements in the same one of these has the same number of energy levels in their electron cloud.
6. The smallest form of matter that still retains the properties of an element.
key:
Neutrons
Quark
Average atomic mass
Isotopes
Group
Period
Answer:
1. The mass on the periodic table.
Average atomic mass
2. Particles that differ in number between isotopes.
Neutrons
3. Vertical column in the periodic table.
Group
4. Atoms of the same element that have different masses.
Isotopes
5. All elements in the same one of these has the same number of energy levels in their electron cloud.
Period
6. The smallest form of matter that still retains the properties of an element.
Quark
Explanation:
Compare and contrast the mass of the object to the size of the object.
is francium found in nature or lab?
Answer:
It was the last element first discovered in nature, rather than by synthesis. Outside the laboratory, francium is extremely rare, with trace amounts found in uranium and thorium ores, where the isotope francium-223 continually forms and decays
How many elements are in NaC2H302?
science vocab (image attached)
Answer:
Solution-a liquid mixture in which the minor component (the solute) is uniformly distributed within the major component (the solvent).
solvent- able to dissolve other substances.
solute- the minor component in a solution, dissolved in the solvent.
colloid- a homogeneous noncrystalline substance consisting of large molecules or ultramicroscopic particles of one substance dispersed through a second substance. Colloids include gels, sols, and emulsions; the particles do not settle, and cannot be separated out by ordinary filtering or centrifuging like those in a suspension.
suspension- is a heterogeneous mixture that contains solid particles sufficiently large for sedimentation.
Explanation:
Help me Guys please I need help with this My step sister is here and she's a demon and annoying Can I have good ideas what to do
Answer:
Lock her in the bathroom
Explanation:
Answer:
Ayoo
Explanation:
1. What factors can change the attractive force between the nucleus of an atom and
its valence electrons?
Answer:
Ionization Energy
Explanation:
Factors such as nuclear charge and distance of electrons to the nucleus
affect the attractive force between the nucleus of an atom and its valence
electrons.
The closer the electron to the nucleus the higher the attractive force.
Nucleus possesses an attractive force for stability which is stronger in
electrons in close proximity with it.
We should also note that the higher the nuclear charge, the stronger the
attractive force and vice versa.
Read more on https://brainly.com/question/14783477
Which of these elements does not bond with other elements to form molecules?
Group of answer choices
Neon
Sulfur
Oxygen
Chlorine
Answer:
Explanation:b
What is the total number of moles of oxygen atoms present in one mole of Mg(CIO3)2?
1. 5
2. 2
3. 3
4. 6
Answer:
Of oxygen would be 6 moles (4).
Explanation:
Since it is in a bracket you have to multiply 3 and tge 2 to get 6 oxygens.
balance the following chemical equation
Na+I2->NaI
Balanced equation : 2Na+I₂⇒2NaI
Further explanationEqualization of chemical reactions can be done using variables. Steps in equalizing the reaction equation:
• 1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c, etc.
• 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index (subscript) between reactant and product
• 3. Select the coefficient of the substance with the most complex chemical formula equal to 1
Reaction
Na+I₂⇒NaI
Give coefficient :aNa+bI₂⇒NaI
Make an equation :Na, left=a, right=1⇒a=1
I, left=2b, right=1⇒2b=1⇒b=0.5
Equation becomes :
Na+0.5I₂⇒NaI x 2
2Na+I₂⇒2NaI
what change in the system will increase the boiling point
Answer:
ExplanationIt is moving from 4s to 8s at a constant speed of 4 cm:
Answer:
Boiling points increase as the number of carbons is increased.
Explanation:
The addition of solutes or other substances usually changes the boiling point. Additionally, changing the pressure on a liquid changes its boiling point. Sugar, salt or other non-volatile solutes in water will usually make the boiling point higher.
The relative strength of the four intermolecular forces is: Ionic > Hydrogen bonding > dipole dipole > Van der Waals dispersion forces. The influence of each of these attractive forces will depend on the functional groups present. Boiling points increase as the number of carbons is increased.
can copper be scratched by a fingernail or blade knife. why?
Answer:
it could by blade knife
Explanation:
fingernail has hardness 2.5; copper penny, about 3.5; a knife blade, 5.5
Use Figure 5-5 to determine the types of radiation described in problem 5
Answer:6.12 x 10¹⁴ s⁻¹
Objects get their colors from reflecting only certain wavelengths when hit with white light. Light reflected from a green leaf is found to have a wavelength of 4.90 x 10⁻⁷ m. What is the frequency of the light?
Explanation:
Answer: 6.12 x 10¹⁴ s⁻¹
Explanation:
why specific gravity test is done ?
Answer: Urinary specific gravity (SG) is a measure of the concentration of solutes in the urine. It measures the ratio of urine density compared with water density and provides information on the kidney's ability to concentrate urine. A urinary specific gravity measurement is a routine part of urinalysis. A urine specific gravity test compares the density of urine to the density of water. This quick test can help determine how well your kidneys are diluting your urine. Urine that's too concentrated could mean that your kidneys aren't functioning properly or that you aren't drinking enough water.
Hope this helps..... Stay safe and have a Merry Christmas!!!!!!!!!! :D
Explanation:
What is the molecular structure of H2O?
Answer:
A water molecule consists of two hydrogen atoms and one oxygen atom. The three atoms make an angle; the H-O-H angle is approximately 104.5 degrees. The center of each hydrogen atom is approximately 0.0957 nm from the center of the oxygen atom.
Explanation: