With the aid pf sketch explain uniform speed and uniform velocity

Yes, it is true. The elevator moves upward because the acceleration is a positive number. If the acceleration is positive, the elevator will move higher.

Here, we can make use of Newton's second law of motion to find the acceleration.

Student mass equals 615/9.81, or 62.7.

The student's weight decreased and increased as a result on the scale.

ma = uarr F

645-615 = 62.7*a

a = 0.478m/s^2

The elevator moves upward because the acceleration is a positive number.

It is real.

The complete question is:

A 615 N student standing on a scale in an elevator notices that the scale reads 645 N.  From this information, the student knows that the elevator must be moving upward. True or false?

To know more about acceleration click on the link:

https://brainly.com/question/12550364

#SPJ4

The Percentage error is zero.

Formula :-

Percentage error = V₀ - Vᵃ/ V₀ × 100%

V₀ = observed value, given = 3486 km

Vᵃ = accepted value, given = 3486 km

Hence, there is no difference between observed value and accepted value. So the Percentage error is zero.

Percentage error compares an estimate to a correct price and expresses the distinction among them as a percentage. This statistic permits analysts to recognize the scale of the error relative to the real fee. it's also known as percent errors and % error.

Percentage error is the difference between a measured or experiment value and an frequent or known price, divided by way of the known price, accelerated by using 100%.

Percentage error tells you ways large your errors are while you measure some thing in an experiment. Smaller values imply which you are near the well-known or actual fee. for example, a 1% error means that you obtain very close to the familiar value, at the same time as 45% method that you had been quite an extended manner off from the authentic price.

Learn more about Percentage error here:- https://brainly.com/question/5493941

#SPJ1

Since the chute is semicircular, the ball's velocity shortly before free fall at the top would be horizontal. Given that, starting velocity u=0 As a result, 2R is the distance from the chute's bottom.

We must first determine the speed at which the ball is moving at the top of the shop. Therefore, let's accelerate. Two G are equal to the centripetal acceleration.

In contrast, acceleration is equal to two B squared. Because of this, the speed is equal to two square. The square root of two G is the Rudolph centripetal acceleration times. It's calculated, that. Yeah. So now, mm hmm, mm hmm, we must calculate it.

Approximately 14 m/s and quite close to checkpoint 1 in meters per second. By dividing the object's velocity by the amount of time it takes to go from one location to another, the acceleration velocity can be calculated. Acceleration results from changes in the magnitude of velocity or direction.

To know more about velocity click on the link:

https://brainly.com/question/18084516

#SPJ4

The force varies in magnitude is 1350 N.

We need to know about momentum to solve this problem. Momentum can be defined as the degree of difficulty to stop a moving object. It can be determined by

P = m . v

where P is momentum, m is mass and v is velocity.

Momentum depends on the Impulse, where

ΔP = I

m (v2 - v1) = F . t

where I is impulse, F is force and t is time

From the question above, we know that:

m = 0.5 kg

t = 24 ms = 0.024 s

v1 = 16 m/s

I = 32.4 Ns

Find the force applied

I = F . t

32.4 = F . 0.024

F = 1350 N

Find more on momentum at: brainly.com/question/25121535

#SPJ4

Answer: As friction force is less than the Resultant

force so they will be able to move the fridge

Explanation:

     top view of fridge

Angle between forces B= 180- 70- (186-110 )

= 170 - 70 = 40 -

Resultant of forces .

R = 1 ( FOR + ( 82 ) 2 + 2 FIF2 COS B .

J (40B) " + ( 375 ) 2 + 2 x 400 * 375 x Cos 40 "

7 28 - 31 1 N .

() friction force = 600.

As friction force is less than the Resultant

force so they will be able to move the fridge

Learn more about friction force  here

https://brainly.com/question/28865324

#SPJ4

There is 728.311N force acting on the front plane. while two individuals attempt to push a refrigerator. Pushing with a force of 400 N, one person is positioned with their back.

Angle between forces B= 180- 70- (186-110 )

= 170 - 70 = 40

R= [tex]\sqrt{(F1^{2} )+(F2^{2})+2F1F2cos\alpha }[/tex]

Here F1= 400

          F2=375

          alpha = 40

Resultant of forces .

728 . 31 1 N

friction force = 600.

friction force.

The refrigerator can be moved since the friction force is smaller than the resultant force.

Force's Definition. When an object interacts with another object, it experiences a push or pull that is known as a force. Every time two things interact, a force is applied to each of them.

Learn more about Force here

https://brainly.com/question/13191643

#SPJ4

Answer:

its c my brotha

because if the density decreases so will the mass less mass=less momentum

The radius of curve that a car goes around that is banked at an angle of 32.6° is 69 m

R = v² / g tan θ

R = Radius of the curve

v = Velocity

g = Acceleration due to gravity

θ = Banked angle

R = 20.8² / ( 9.8 * tan 32.6° )

R = 432.64 / ( 9.8 * 0.64 )

R = 432.64 / 6.27

R = 69 m

A banked surface is a surface that is sloped upwards on the outer side of a curve. In race car tracks, the banked angle is usually 12° to 36°.

Therefore, the radius of curve that a car goes around that is banked at an angle of 32.6° is 69 m

To know more about banked surface

https://brainly.com/question/13397235

#SPJ1

The de Broglie wavelength for a particle== 0.92 ×10⁻³⁴m.

de broglie wavelength is the wavelength associated with particle of mass m moving with velocity v.

p= h/ λ

where, p -is  the momentum of the atom;

h- Planck's constant - 6.626×10⁻³⁴ m²kg s⁻¹

λ- wavelength;

Momentum can be expressed as

p=m×v

where , m is  the mass of the particle;

v - the speed of the particle.

so,

λ = h/(m×v)

= ( 6.626×10⁻³⁴ m²kg s⁻¹)/(1.2kg × 6.0 m/s)

= (6.626×10⁻³⁴ m²kg s⁻¹)/7.2

= 0.92 ×10⁻³⁴ m

learn more about  de Broglie wavelength-https://brainly.com/question/13379443

#SPJ4

Answer:

There traits are= understanding,fast thinkers,reliable/trustworthy,

Answer:

An effective team is a one where the team members, including the patients, communicate with each other, as well as merging their observations, expertise and decision-making responsibilities to optimize patients

In order for the electrons to emit photons and leave the ground state, the heat produced by the electricity must be present.

The electron is a subatomic particle with a negative one elementary charge electric charge. Due to their lack of components or substructure, electrons, which are part of the lepton particle family's first generation, are typically thought to be elementary particles.

The electromagnetic force is carried by a photon, an elementary particle that is a quantum of the electromagnetic field and includes electromagnetic radiation like light and radio waves. Since photons have no mass, they always move at the 299792458 m/s speed of light in a vacuum.

To know more about radio waves :

https://brainly.com/question/13989450

#SPJ9

Answer: Substance 3 is liquid at room temperature

Explanation: The common room temperature is assumed to be 20-22°C, we need to find the substance that will be in liquid state in that temperature.

For Substance 1, the boiling point is -195.975°C, and hence at room temperature, it would be in vapor phase and all liquid would have turned to gas.

For Substance 2, the boiling point is 3.85°C, and hence at room temperature, it would be in vapor phase and all liquid would have turned to gas in this case too.

For Substance 3, the boiling point is 77.85°C, and melting point is -108.15°C, hence at room temperature, it would be in liquid state.

For Substance 4, the melting point itself is 1800°C, due to which at room temperature it would be in solid state.

Given the fact that the arrow is in motion, it the follows that the arrow possesses kinetic energy.

The kinetic energy is the energy that is possessed by a body by virtue of its motion. This is different form the potential energy of the body which is the energy that the body possesses as a result of the fact that the object is located at a particular position. These are actually the two kinds of mechanical energy that we have in the study of physics.

If we consider this matter closely, we would see that the arrow as shown is in motion. The arrow does posses a velocity and such the arrow is in motion. As long as we can see that the arrow is in motion, it the follows that the arrow as we can see does and in fact possesses the kinetic energy.

Learn more about kinetic energy:https://brainly.com/question/12669551

#SPJ1

The hanging mass that would produce an extension of 3.0cm is 4.5kg (option A).

The spring constant denoted by K is a measure of the stiffness of the spring. It is different for different springs and materials.

The larger the spring constant, the stiffer the spring and the more difficult it is to stretch.

The spring constant can be calculated using the following formula:

k = F/e

Where;

F = 15 × 3 = 45N

Since Force = mass × acceleration (10m/s²), the mass can be calculated as follows:

m = 45N ÷ 10m/s² = 4.5kg

Therefore, 4.5kg is the mass of the spring.

Learn more about spring constant at: https://brainly.com/question/14159361

#SPJ1

Answer: 100km/20s=5km/s

Explanation:because velocity is equal to distance ovet time

B. The pairs of vectors equal in direction only are one short and one long arrow going in the same direction.

The direction of a vector  can be defined as the measure of the angle it makes with a horizontal line.

The direction of a vector can also be described as the measure of the exact position on the x and y coordinate where a vector can be found.

When we describe the direction of vectors, we don't consider their size or magnitude, rather we focus on the angle of inclination of the vectors above the horizontal.

The magnitude of a vector is defined as the size of the vector.

Vectors pointing or going in the same direction have equal directions despite their size.

Vectors with equal size have the same magnitude despite their directions.

Thus, we can conclude that two vectors going in the same direction will have equal direction.

Learn more about direction of vectors here: https://brainly.com/question/110151

#SPJ1

The time taken for the cd player to reach the full angular speed is 4 seconds.

The time of motion of the cd player is calculated by applying the following kinematic equation as shown below.

ωf = ωi + αt

where;

Since the cd player started from rest, the initial angular velocity = 0

The time taken for the cd player to reach the full speed is calculated as follows;

1600 = 0 + 440t

1600 = 400t

t = 1600/400

t = 4 seconds

Learn more about angular velocity here: https://brainly.com/question/6860269

#SPJ1

The time period of simple pendulum is 2xpi x (l/g)^1/2  when derived by dimensional method.

To know more about dimension visit:

https://brainly.com/question/28688567

#SPJ9

Answer:

✨Hello mark as branlist Identify the physical principles involved by listing the givens and the quantities to be calculated

Explanation:

The radius of a planet that has the same mass as earth but on which the free-fall acceleration is 4.90 m/s² is 9 M m

g = G M / R²

g = Acceleration due to gravity

G = Gravitational constant

M = Mass

R = Radius

g = 4.9 m / s²

G = 6.67 * [tex]10^{-11}[/tex] m³ / kg s²

M = 5.97 * [tex]10^{24}[/tex] kg

R² = ( 6.67 * [tex]10^{-11}[/tex] * 5.97 * [tex]10^{24}[/tex] ) / 4.9

R² = 81.3 * [tex]10^{12}[/tex].

R = 9 * [tex]10^{6}[/tex] m

R = 9 M m

Acceleration due to gravity is the acceleration produced by a planet. If an object is falling, it will gain some acceleration due to gravitational force.

Therefore, the radius of a planet is 9 M m

To know more about Radius of a planet

https://brainly.com/question/13084871

#SPJ1

Answer:

K ≈ 1.10 × 10⁻¹⁸ J

Explanation:

Apply the Photoelectric Equation of Einstein:

h × f = K - W

Where:

h: Planck's constant = 6,62607015 × 10⁻³⁴ m². kg / s;

K: kinetic energy;

W: work function.

So:

h × f = K - W

6,63 × 10⁻³⁴ × 9.62 × 10¹⁴ = K - (2.90 × 1.6×10⁻¹⁹)

K = 6,63 × 10⁻³⁴ × 9.62 × 10¹⁴ + 2.90 × 1.6×10⁻¹⁹

K ≈ 1.10 × 10⁻¹⁸ J

The mass of the chocolate from the table that we can find in the question is 11 grams.

We can see that the table as it have been shown gives us both the total number of the  trail mix that Alex has brought to the school as well as the various individual components of the  trail mix that he has. Looking at this over view would be of a lot of help as we are trying to find out now the number of the mass of the chocolate that Alex ate.

We have the following information;

Mass of nuts = 24 grams

Mass of raisins = 10 grams

Mass of chocolate = unknown grams

We can now have;

Total mass = Mass of nuts + Mass of raisins + Mass of chocolate

Mass of chocolate = Total mass - (Mass of nuts + Mass of raisins)

Mass of chocolate = 45 - (10 + 24)

Mass of chocolate = 11 grams

Learn more about total mass:https://brainly.com/question/17552181

#SPJ1

Seconds later, the amplitude of its momentum, p2, is equal to p1 + (F * Delta t).

A characteristic of an object in motion that it possesses as a result of its mass and motion and which, generally speaking, equals the product of the object's mass and velocity: a feature of an object in motion that determines how long it will take to bring it to rest when subjected to a constant force.

When a certain force is applied for a certain amount of time, a mass's velocity changes.

The following equation expresses this:

Eq. 1: Mass * Force * Time (Final velocity – Initial velocity)

Mass times speed equals momentum.

Eq. 2: Mass * Change in momentum (Final velocity – Initial velocity)

Set Eq1 = Eq2

Force x Time Equals Momentum Change

Equation 3: Final momentum - Initial momentum = Force * time

a mass m particle traveling along the x axis

The particle is being affected by the net force F along the x axis.

A constant force is F.

Eq. 1: Mass * Force * Time (Final velocity – Initial velocity)

Delta t = m * = F (Final velocity – Initial velocity)

Equation 3: Final momentum - Initial momentum = Force * time

p2 = p1 + (F * Delta t) = p2 - p1

Seconds later, the amplitude of its momentum, p2, is equal to p1 + (F * Delta t).

To know more about momentum visit:

https://brainly.com/question/24030570

#SPJ9

The center of mass of the three mass system is at 83cm

A position relative to an object or set of objects is known as the center of mass. It is the system's average location, weighted by the mass of each component.

Given the mass of the meter stick is:

M = 0.5kg.

Since the meter stick is uniform, the center of mass of the meter stick is at 50cm or 0.5m.

Let the distance of the meter stick's center of mass from 0cm be x1. Then x1 = 0.5m.

Now a mass m2 = 1kg is attached at 50cm mark.

So the distance of m2 from 0cm is x2 = 50cm = 0.5m.

Similarly a mass m3 = 3kg is attached at the every end or 100cm mark. So the distance of m3 from 0cm is x3 = 100cm = 1m.

Now the position of the three mass system from 0cm is given by,

[tex]X_{CM}=\frac{Mx_{1}+m_{2}x_{2}+m_{3}x_{3}}{M+m_{2}+m_{3}}X_{CM}=\frac{0.5\times 0.5+1\times 0.5+3\times 1}{0.5+1+3}=\frac{3.75}{4.5}=0.83m = 83cm[/tex]

So the center of mass of the three mass system is at 83cm.

To know more about  center of mass visit:

https://brainly.com/question/8662931

#SPJ9

Both the average and instantaneous velocities well be same over the given interval if the acceleration is zero.

Instantaneous velocity is the rate of differential change of displacement with respect differential change in time. Mathematically -

v = dx/dt

Given is the acceleration of a school bus over a given time interval as zero.

For acceleration over a given time interval to be zero, it must be ensured that the the velocity of the object should remain constant. Mathematically-

a = (v - u)/(t₂ - t₁)

For acceleration [a] = 0, v = u. Therefore -

a = 0

The instantaneous velocity for zero acceleration between the time interval t₁ to t₂ will be equal to initial velocity only -

dx/dt = u          

This will be the instantaneous velocity and is equal to (u) at any instant.

Now -

dx = u dt

Integrating both sides, we get -

∫dx = ∫u dt

x = ut

Therefore, the average velocity will be =

v(avg) = x/Δt = ut/Δt

Now -

t = Δt for any specific time interval. Therefore -

v(avg) = ut/t = u

This is the average velocity and it is equal to (u).

Therefore, both the average and instantaneous velocities well be same over the given interval if the acceleration is zero.

To solve more questions on instantaneous velocity, visit the link below-

https://brainly.com/question/17475447

#SPJ1

The change in the velocity of the rocket after 220 meters is 80.42 m/s.

The change in the velocity of the rocket at the given time of motion is calculated as follows;

Apply the following kinematic equation to determine the velocity of the rocket.

v² = u² + 2as

where;

v² = 2as

v = √2as

v = √(2 x 14.7 x 220)

v = 80.42 m/s

Learn more about velocity here: https://brainly.com/question/25749514

#SPJ1

The average force acting on the ball is biggest in the with the cement floor case 2 when in the collision the ball bounce back to half of its initial height.

It is asked that in which case the average net force on the ball is highest.

According to impulse-momentum theorem,

Impulse I = F.Δt

where, F is the net average force and Δt is the time of contact during the collision.

In the case of collision with the rubber piece the time of contact of the ball and the ball increases by large amount while in the case of cement floor the time of contact is very very less.

The change in momentum which is equal to the Impulse is also biggest in the case of cement floor because the transfer of kinetic energy of the ball in the case of cement floor will be almost immediate.

The Bigger change in momentum and the smaller time of contact makes the average force on the ball is biggest in the case of cement floor case.

To know more about Impulse-momentum theorem, visit,

https://brainly.com/question/904448

#SPJ9

Answer:

[tex]0.5\; {\rm m}[/tex].

Explanation:

The period [tex]T[/tex] of a wave is the reciprocal of its frequency [tex]f[/tex]. In other words, [tex]T = (1/f)[/tex]. Since the frequency of the wave in this question is [tex]f = 10\; {\rm Hz} = 10\; {\rm s^{-1}}[/tex], the period of this wave would be [tex]T = (1/f) = (1/10)\; {\rm s} = 0.1\; {\rm s}[/tex].

The wavelength of a wave is the distance its wavefront travels in one period [tex]T[/tex].

The period of this wave is [tex]T = 0.1\; {\rm s}[/tex]. At a speed of [tex]v = 5\; {\rm m\cdot s^{-1}}[/tex], it would have travelled a distance of [tex]v\, T = (0.1\; {\rm s})\, (5\; {\rm m\cdot s^{-1}}) = 0.5\; {\rm m}[/tex] within one period.

According to Newton's Second Law, an object's net force is equal to the product of its mass and acceleration.

Force (F) can be computed from the 2nd Law of Motion using the following formula:

Fnet = ma( Equation 1 )

due to the fact that the problem did not specify it. We'll suppose the plane is flying straight up.

To know more about Newton's Second Law pleas click on the link:

https://brainly.com/question/13447525

#SPJ4

Doing pull ups and when have a pause at up , there is almost entire body weight just except the weight of the hands.

To know more about pull-ups visit:

https://brainly.com/question/15411071

#SPJ13