your electric utility company sends you a monthly bill informing you of the number of kilowatt- hours you have used that month. a. is the utility charging you for energy or power? explain.

The number of vibrations are 122

as per the question given,

the length of the mass less string (l) is 31cm

a mass attached to the right end of spring (m) is 1kg

the value of the spring constant is (k) is 164 n/m

the mass is pulled by a distance (d) is 3cm

time (t) is 60s

the time period of the mass-less spring  system is

[tex]T=2\pi \sqrt{\frac{m}{k} }[/tex]             ----(1)

where

the value of (m) is 1kg

the value of spring constant (k) is 164 n/m

let the value of [tex]\pi[/tex] is 3.14

now substitute the values in the time period equation

[tex]T=2\pi \sqrt{\frac{1}{164} }[/tex]

=> [tex]T= 2\times (3.14) \sqrt{\frac{1}{164} }[/tex]

=> T = [tex]2\times (3.14) \times 0.07803[/tex]

=> T =0.49002

the time period T is 0.49002,

therefore the number of oscillations in 60s is

n = time/Time period

[tex]n=\frac{60}{T}[/tex]

=>n =  [tex]\frac{60}{0.49002}[/tex]

=> n= 122.43

=> n = 122

the number of vibrations are 122    

To learn more about simple harmonic motion:

https://brainly.com/question/13011102

#SPJ4

Answer:

It is D) Uranus

The parametric equations of the velocity as a function of time are Vx (t) = 2.4 and Vy (t) = - 2.4 · t, respectively.

Parametric equations are equations in terms of a single variable t, the velocity of the particle is the first derivative of position, whose definition is shown below:

Vx (t) = dx (t) / dt

Vy (t) = dy (t) / dt

Where:

Physically speaking, the single variable t represents time.

The derivative are found by derivative rules. If we know that x (t) = α · t and y(t) = 3 - β · t², then the velocity functions are:

Vx (t) = α

α = 2.4 m / s

Vx (t) = 2.4

Vy (t) = - 2 · β · t

β = 1.2 m / s²

Vy (t) = - 2.4 · t

To learn more on parametric equations: https://brainly.com/question/28537985

#SPJ1

The source of experimental error that could cause the calculated kinetic energy of the object at the bottom of the path to be larger than the calculated value for the change in gravitational potential energy of the object-Earth system as the object moves from its release point to the lowest point in its path is "The measurement of d is larger than the actual value".

option D is the correct answer.

The kinetic energy of an object is the energy possessed by the object due to the motion of the object at a given time period.

Mathematically, the formula for kinetic energy of an object is given as;

K.E = ¹/₂mv²

Where;

From the equation given above, the kinetic energy of an object depends on the mass and velocity of the object.

If the speed v of the object is then calculated by dividing d by t, then error is from the speed calculated, and implies that the main error is the width d, from which the speed is calculated.

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

The employment of tactics to settle disputes or reduce tension is known as conflict management.

In order to identify the issue, explore solutions, and develop overarching goals that call for cooperation from the disputing parties, conflict resolution approaches involve hosting meetings for the disputing parties. Knowing how to recognize problems and handle them in a reasonable, equitable, and effective manner is the practice of conflict management. It is the process of resolving (seen) conflicts or differences resulting from, for instance, different ideas, goals, and wants. Team members employ conflict management strategies to resolve any disputes that develop throughout a Scrum project. This method of handling conflicts is frequently competitive and usually ends in a Win-Lose situation. The team needs to be led by the scrum master, who must convey to them that conflict is a regular issue in the workplace and can be managed by taking an assertive stance. The team's leader is responsible for making sure that the team members' concerns are understood and addressed.

to know more about conflict management please visit.

https://brainly.com/question/17744728

#SPJ4

ΔEint = 46.42 J is the correct answer.

According to the Kinetic Molecular Theory of Gases,

Referring to equation , we have

ΔEint=nCVΔT= 5/2nRΔT

Q=nCPΔT = 7/2nRΔT

Dividing the equations, we obtain

ΔEint/Q = 5/7

Thus, the given value Q=65 J leads to ΔEint = 46.42 J

What is Kinetic Theory?

1) Gases are made up of a lot of tiny particles spaced far away from one another.

2) The gas molecules clash elastically with the container wall as well as with one another.

3) Gas molecules have kinetic energy and are constantly moving randomly.

4) The attraction between gas molecules is extremely weak and is regarded as negligible.

5) The average kinetic energy of gas molecules is precisely proportional to the temperature of the gas.

To learn more about kinetic theory

https://brainly.com/question/14388221

#SPJ4

The current flowing when the charge is transfered at different rates are:

A. 4.5 A4.5 A

B. 3.2 A

C. 4.6 A

D. 3 A

E. 2 A

F. 13 A

G. 6.4 A

H. 8.8 A

I. 0.5 A

We know that charge, current and time are related by the following formula:

Charge (Q) = Electric current (I) × time (t)

Q = It

Divide by t

I = Q / t

With the above formula, we can obtain the current. Details below:

A. How do I determine the current?

I = Q / t

I = 4.5 / 1

I = 4.5 A

B. How do I determine the current?

I = Q / t

I = 192 / 60

I = 3.2 A

C. How do I determine the current?

I = Q / t

I = 16560 / 3600

I = 4.6 A

D. How do I determine the current?

I = Q / t

I = 1.8 / 0.6

I = 3 A

E. How do I determine the current?

I = Q / t

I = 3.2 / 1.6

I = 2 A

F. How do I determine the current?

I = Q / t

I = 33.8 / 2.6

I = 13 A

G. How do I determine the current?

I = Q / t

I = 147.2 / 23

I = 6.4 A

H. How do I determine the current?

I = Q / t

I = 7920 / 900

I = 8.8 A

I. How do I determine the current?

Charge (Q) = 7920 C

Time (t) = half hour = 30 mins = 30 × 60 = 1800 s

Current (I) = ?

I = Q / t

I = 900 / 1800

I = 0.5 A

Learn more about current:

https://brainly.com/question/23754329

#SPJ1

Answer:

The formula of acceleration (a) = velocity (v)- initial velocity (u) /time taken(t)

"A change of phase takes place at a constant temperature."

A substance changing its phase by a physical process is called a phase change. The shift often happens when heat is applied or removed at a specific temperature, also referred to as the substance's melting or boiling point.

Both when the system receives enough energy and when the pressure on the system changes, these changes take place.

The energy that is given during a change in the state of matter is used to alter the binding energies rather than boost the kinetic energy of the molecules. As a result, the temperature doesn't change.

To know more about phase change:

https://brainly.com/question/18368825

#SPJ4

The fundamental frequency, which is also known as the instrument's first harmonic, is the lowest pitch that every instrument can play.

The fundamental frequency is the lowest frequency that can be produced by a certain instrument.A first harmonic of a instrument is another name for the fundamental frequency.

The fundamental frequency is another name for the first harmonic.It is the frequency's lowest attainable value.Simply said, the term "first harmonic" refers to a wave that consists of simply two nodes and an antinode.

To know more about frequency visit:

https://brainly.com/question/5102661

#SPJ4

Alpha particles have a charge +2e decay is far and away from the foremost common sort of cluster decay, where the parent atom ejects an outlined daughter collection of nucleons, leaving another defined product behind. Like in case of other cluster decays, Alpha decay is also a fundamentally quantum tunnelling process.

Understanding Q Value in Alpha Decay:

In Physics, the Q-value is defined as the difference between the sum of the rest masses of original reactants and the sum of final product of masses. In simpler terms, we can say that the Q-value is the difference between the final and initial mass energy of the decayed products.

For the alpha decay equations, this Q-value is,

Q = (mX – mY – mHe) c2 (he-helium)

The energy Q derived from this decay is divided equally into the total transformed nucleus and the Helium nucleus.  

To know about more alpha decay:

https://brainly.com/question/27870937

Answer: alpha decay, type of radioactive disintegration in which some unstable atomic nuclei dissipate excess energy by spontaneously ejecting an alpha particle.

Explanation:

The maximum magnitude of linear momentum of emitted photoelectron is 4.12 1025 kg/s.

The photoelectron spectrum is created by analyzing the spectrum of energies that are present in the electrons produced when an intense photon of radiation strikes a molecule. These electrons are referred to as photoelectrons.

The incident photon's energy is given by

E = 1240 / λ ev,

= 1240 / 400,

= 3.1 eV.

W = 2.5 eV is the work function.

Therefore, the electron's maximal energy will be given by

KE = E-W

= 3.1 eV - 2.5 eV

= 0.6 eV = 0.6 1.6 10⁻¹⁹ Joule.

The greatest possible linear momentum is given by p = √2m.

KE is equal to √(2 9.1 1031 kg 0.96 10⁻¹⁹) joules = 4.12 1025 kg/s.

To learn more about photoelectrons from given link

https://brainly.com/question/30007912

#SPJ4

Single-gene, chromosomal, and multifactorial genetic illnesses can be grouped into these three main categories.

Three factors lead to evolution through natural selection: variation among individuals within a species, heritable variation, and an overpopulation of organisms relative to available resources.

The role that certain genes or gene families play in health and disease is the primary focus of genetic study. Understanding genetic influences and genetic anomalies is necessary to advance health promotion and disease prevention. The study of genetics covers how a person inherits traits from their parents. It explains how features that are straightforward like eye color or complex like disease vulnerability run in families.

To know more about genetics visit:-

https://brainly.com/question/12985618

#SPJ4

Your experimental value for the earth's magnetic field Be = 1.43nT is the correct answer.

Earth's magnetic field is a naturally occurring, complex force field that surrounds the planet. It is generated by the Earth's core, which is composed of iron and nickel, and is responsible for protecting the Earth from charged particles and other cosmic radiation. The magnetic field is constantly changing and is believed to be generated by the movement of molten metals in the Earth's outer core. This movement creates electric currents which generate the magnetic field.

Given equation by which the given quantities are related by

f2 = (µk/4π2m) I + (µk/4[tex]\pi ^{2}[/tex]m) Be

Here,

Slope = µk/4[tex]\pi ^{2}[/tex]m

µk/4π2m = 56.6

For y – intercept

(µk/4π2m) Be = 0.81

(56.6/K) Be = 0.81

Be = (0.81/56.6) K

Here,

K = [tex]10^{-7}[/tex] N/m

Thus,

Be = (0.81/56.6)[tex]10^{-7}[/tex]

Be = 1.43nT

To learn more about Earth’s magnetic field:

https://brainly.com/question/1597144

#SPJ4

"A set of points in the xy - plane is the graph of a function if and only if every vertical line intersects the graph in at most one point."

A line that is perpendicular to the surface is the vertical line. In coordinate geometry, the vertical lines are frequently parallel to the y-axis, perpendicular to the horizontal lines, and vice versa. A vertical line is any straight line that passes from top to bottom or from bottom to top.

The vertical lines are sometimes known as standing lines. Normally, we connect the bases of a square or a rectangle using vertical lines. In our daily lives, we encounter vertical lines in the form of fence bars made of steel, tall trees that stand straight up, table legs, etc. Let's explore it further with a few concrete instances.

To learn more about graphs:

https://brainly.com/question/30115834

#SPJ4

Answer:

A simple microscope is simple in structure It was invented by Robert Hook It is less convenient to use it can only helps us to detect the virus but not bacteria It is cheap compared to other microscope

There is more energy with the light of wavelength 580 nm compared to 660nm as energy is inversely related to wavelength.

The energy of a radiation type is inversely proportional to its wavelength. This means energy increases with decreases in wavelength, and energy decreases with increases in wavelength. The relation between energy, wavelength, and frequency is shown by the equation E = hν = hc/λ.

where

E = energy,

h = Planck's constant,

ν = frequency,

c = the speed of light,

and λ = wavelength of the wave

Wavelength is defined as the distance measured between two adjacent crests or two adjacent troughs of a wave cycle.

To know more about wavelength here

brainly.com/question/13533093

#SPJ4

Answer:

a = 6 m/s^2

Explanation:

Suvat equation is applied

s = 192m

v (final velocity) = 0

u (initial velocity) = 48

a = ?

So,

v^2 = u^2 + 2as

(0)^2 = (48)^2 + 2a(192)

-2304 / 384 = a

a = 6 m/s^2

(negative sign is ignored as it asked as acceleration not deceleration)

I hope my answer helps you

The cause of our solar system beginning to form is A: "a large cloud of dust and gas began to contract under the force of gravity."

Our solar system evolved from a dense cloud of interstellar gas and dust some 4.6 billion years ago. The cloud collapsed, probably as a result of the shockwave from a nearby exploding star known as a supernova. When this dust cloud collapsed, it created a solar nebula, which is a spinning, swirling disc of material.

It means that the formation of our solar system began around 4.6 billion years ago with the gravitational collapse of a small part of a larger molecular cloud.

You can learn more about solar system at

https://brainly.com/question/1286910

#SPJ4

The car's magnitude of velocity will decrease if the applied force is balanced out by the drag force.

An object's velocity, as opposed to its speed, describes how quickly it goes in both directions. Velocity in physics is the rate of movement in a specific direction.

The force acting on an object is equal to its mass times its acceleration, or Newton's second law, which is sometimes expressed as F=ma (a). Therefore, more force is required to accelerate an object with more mass. And the acceleration of an item increases with force.

To know more about force visit :-

brainly.com/question/13191643

#SPJ4

The complete question is :

The illustration below shows the forces on an automobile as it moves. If the drag force is equal to the applied force, which of the following describes the motion of the automobile?

A. The car's magnitude of velocity will increase

B- The car's magnitude of velocity will decrease

C. The car's magnitude of acceleration will increase

D. The car's magnitude of acceleration will decrease

The gravitational pull of Earth influences the way matter behaves on Earth's surface by pulling objects towards the center of the planet.

To learn more about gravitational force refer :

https://brainly.com/question/72250

#SPJ1

The Quantum theory doesn't prove that consciousness moves to another universe at death. So, the statement is b) false.

The quantum theory of consciousness argued that the brain's nervous system forms a complex network of consciousness that it produces and should follow the rules of quantum mechanics, the theory that governs how tiny particles like electrons move. They argue that this can explain the mysterious complexity of human consciousness. The idea that quantum effects are necessary for consciousness to function is still in the realm of philosophy. Penrose suggests that it is necessary, but other theories of consciousness do not. argued that it should obey the rules of quantum mechanics and quantum theory.

Learn more about quantum theory in

https://brainly.com/question/4751848

#SPJ4

293.7 degrees in a clockwise motion from the plus x-axis.

A=8 sin(37)i - 8 cos(37)j

A + B = -12 j

B = an I + b j, where and are constants that need to be determined.

A and B are equal to (a - 8 sin (37))i and (8cos(37) + b). j - 12 j = (8cos(37) + b) + (a - 8 sin (37)) I

Coefficients of I and j are compared.

B = 4.81452 I - 18.38908 j, or the fourth quadrant, from the equations a = 8 sin (37) = 4.81452 m and b = -12 - 8cos(37) = -18.38908.

In light of this, cos (Q) = 4.81452 / 12 Q = 66.346 degrees.

From the plus x-axis in the CCW direction, 360 - Q = 293.65 degrees.

To know more about Vector visit:

https://brainly.in/question/4959928

#SPJ4

The resonant frequency of the circuit  is [tex]fo/2[/tex]

as given in the question,

in a series L-R-C circuit

the frequency of  the circuit is at resonance

so it is f subscript o

the resistance of the circuit is doubled

where the inductance and capacitance and the voltage amplitude is of the AC source.

the inductance of the circuit (L) is 2L

the capacitance of the circuit (C) is 2C

Resonant frequency is the oscillation of the circuit in its natural state.

[tex]f=\frac{1}{2\pi \sqrt{LC} }[/tex]

where

L is the inductance of the circuit

C is the capacitance of the circuit

[tex]fo[/tex] is the resonant frequency

therefore

by the angular frequency formula

w=[tex]2\pi f[/tex]

=> [tex]f = \frac{w}{2\pi }[/tex]

now

[tex]f=\frac{1}{2\pi \sqrt{LC} }[/tex]

by placing the new values of L and C

[tex]f=\frac{1}{2\pi \sqrt{(LC)} }[/tex]

=> f = [tex]\frac{1}{2\pi \sqrt{(2L2C)} }[/tex]

=> f = [tex]\frac{1}{2\pi \sqrt{(LC)} } \frac{1}{2}[/tex]

=>f = [tex]\frac{1}{2} \times (fo)[/tex]

=> f= [tex]fo/2[/tex]

therefore by this we can say that

the resonant frequency is [tex]\frac{fo}{2}[/tex]

to learn more about Resonance frequency:

https://brainly.com/question/28042738

#SPJ4

The x axis supports a proton and an electron. At x = -d, the proton is located, while at x = +d, the electron.

One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons together. The positive charge of a proton balances the negative charge of an electron.

Electrons are incredibly light, negatively charged particles. These electrons move in distinct orbits around the nucleus. (ii) Protons have a mass of roughly 1 amu and are positively charged particles. These positively charged particles can be found in the nucleus, which sits in the center of the atom.

To know more about  proton and electron visit:

https://brainly.com/question/29248303

#SPJ4

The binding energy per nucleon for ¹⁴N is 7.48 MeV.

The binding energy per nucleon for ⁵⁶Fe is 8.79 MeV.

The binding energy per nucleon for ²⁰⁷Pb is 7.87 MeV.

The formula to calculate the mass defect for [tex]^A_Z X[/tex]

ΔM = (Z × mp) + (N × mn) - m

To calculate the binding energy per nucleon

BE = (ΔM × 931.5 MeV) ÷ A

For [tex]^{14}_7 N[/tex]

For [tex]^{56}_{26} Fe[/tex]

For [tex]^{207}_{82} Pb[/tex]

Learn more about binding energy here: https://brainly.com/question/15582431

#SPJ4

From the given diagrams, we can tell options b, c, d, f, and g are the correct options. Because they are an incorrect depiction of the electric field line.

In a certain area of space, electric field lines provide details on the direction (and intensity) of an electric field. At a particular position, a field line is drawn perpendicular to the net. Therefore, the tangent to the electric field line at any place coincides with the direction of the electric field there.

To ascertain the electric field of a point charge, apply Coulomb's law. From the point charge, the electric field radiates in all directions. Always pointing away from positive charges and toward negative charges are electric field lines. In actuality, positive charges initiate electric fields, which terminate at negative charges. Field lines never cross each other, as well. If they do, it indicates that there are two directions to the electric field there.

Here, options a and e are correct depictions of field lines for a point charge.  

The complete question is -

Consider the drawings of charges and electric field lines shown. Which of the electric field line drawings are incorrect for point charges?

a), b), c), d), e), f), g)

To know more about electric field lines:

https://brainly.com/question/9842506

#SPJ4

Measurements of magnet strength can be made in a variety of ways, depending on which is most practical for a given application. Here are a few popular units for measuring magnet strength.

1. Tesla

The unit of magnetic force denoted by the letter T is called a tesla. It describes the residual flux density, or the density of a magnetic field.

There are numerous methods to define a tesla in terms of other scientific units of measurement. For instance:

T = kg / (A * s2)

2. Gauss

A magnet is frequently made magnetic by the application of an external magnetic force. The magnetic force that remains in the magnet after the removal of the external force is referred to as remanence.

3. Oersted

Oersteds (Oe), are units used to quantify resistance to demagnetization or coercivity.

4. kilograms

Magnet pull strength is measured in kilograms in terms of magnetism.

For more information on magnetism kindly visit  to

https://brainly.com/question/2841288

#SPJ4

Energy in terms of Joules = 1956.50 GJ is the answer.

Energy generation by the Power plant (on annual basis) is given as: -

A.  When heat recovery feature is Present

E = (M * HHV * C * ηc * 365) / 3600 watt – hr         ------------- equation (i)

B.  When heat recovery feature is not present

E = (M * LHV * C * ηc * 365) / 3600 watt – hr        ------------- equation (ii)

Here,

 M = Mass of Pellets consumed per day (Kg/day)

 HHV = Higher Heating Value of Biomass (J/Kg)

 LHV = Lower Heating Value of Biomass (J/Kg)

 C = Capacity factor {Plant running this % time in a day}

 ηc = Conversion efficiency

 Joule to watt – hr conversion factor

 1 Joule = 1 /3600 watt – hr

Given:

 M = 1.3 * 106 Kg/day;

 HHV = 19.9 * 106 J/Kg;

 LHV = 17.4 * 106 J/Kg

 C = 56% = 0.56

 ηc = 37% = 0.37

Heating Recovery feature ---> Present

As heating recovery feature is present so eq. 1 will be used

Now, putting corresponding given values in Eq. 1 to get the value of E.

E = (M * HHV * C * ηc * 365) / 3600

E = (1.3 * 106 * 19.9 * 106 * 0.56 * 0.37 * 365) / 3600

E = (1956.496 * 1012) / 3600

E = 543.47 Gwh

Energy in terms of Joules = 543.47 * 3600

Energy in terms of Joules = 1956.50 GJ

Energy Generation (E) by the power plant (on annual basis) = 543.47 Gwh (Giga Watt – hour)

Energy Generation (E) by the power plant (on annual basis) = 1956.50 GJ (Giga Joule)

To learn more about Energy Generation:

https://brainly.com/question/29794465

#SPJ4

An investigation that could test whether a material has a density less than, greater than, or equal to water will involve placing the material in a given volume of water in a beaker and observing whether the material will float or sink in water.

the independent  variable is the volume of water

The dependent variable is the density of the material

The density of a substance is the ratio of the mass of the substance to the volume of the substance.

Mathematically;

Density = mass / volume

To determine the density of a substance, the density of that substance is compared to that of water.

A substance that has a density less than water will float in water.

A substance that has a density greater than water will sink in water.

A substance that has a density equal to water will just float in water.

Learn more about the density of water at: https://brainly.com/question/28910531

#SPJ1