Answer:
Try a grams calculator, Its pretty to nd one :D
Explanation:
Explain why for static electricity to occur between two surfaces that are rubbed against each other, one of the materials has to be an insulator
When two surface come in contact and rub each other a frictional force causing them s deformation and this leads to a voltage giving rise to a static charge.
What is static charge?Static charge is developed within a body temporarily with an induced polarization. These charges are not moving and set into a pole in the material.
When two materials rub against each other in which one is a conductor and other to be an insulator, they will attract by the induced polarization. Rubbing causes the free electrons in the condutor to be transferred towards the insulator.
This will cause a deformation that, the random charges in the material get polarized where the electrons in the insulator will repel to the opposite pol and positive charges will align in a pole close to the condutor.
This charge separation causes the positive pole of the insulator gets attracted into the conductor surface. Hence, there forms a static electricity by the passage of electron.
To find more on static electricity, refer here:
https://brainly.com/question/12791045
#SPJ5
what does the prefix non-represent?
O 9 carbon atoms, only
O 9 carbon atoms and 20 hydrogen atoms
O 9 carbon atoms and 18 hydrogen atoms
O 9 carbon atoms and 16 hydrogen atoms
Answer:
O 9 carbon atoms, only
Explanation:
Prefix: non- simply means 9.
Suffix: -ene means double bond, -yne means triple bond, and -ane means single bonded carbons.
Explain the reason that the atomic emission spectrum of hydrogen contains only four lines.
Answer:
Though a hydrogen atom has only one electron, it contains a large number of shells, so when this single electron jumps from one shell to another, a photon is emitted, and the energy difference of the shells causes different wavelengths to be released... hence, mono-electronic hydrogen has many spectral lines.
Explanation:
thank me later
Why are polar gases, such as H2O and NH3, more likely to deviate from the ideal gas behaviors described by the kinetic molecular theory? (3 points)
Question 4 options:
1)
The density of these gases is high, increasing the number of collisions and reducing their elasticity.
2)
The fluidity of these gases is high, resulting in a higher average kinetic energy.
3)
The particles have a significant volume, reducing the space between the moving particles.
4)
The particles have high intermolecular forces, reducing the elasticity of their collisions.
Answer:
The particles have high intermolecular forces, reducing the elasticity of their collisions.
Explanation:
What is the time it takes for half of the radioactive atoms in a sample of a radioactive element to decay?
A relative age
B. potassium-argon date
C. absolute age
D half-life
Answer:
D. Half-life
Explanation:
Half‐life is the amount of time it takes for approximately half of the radioactive atoms in a sample to decay into a more stable form. Every radioactive element has a different half‐ life.
A gas has a volume of 4 liters at 50 oC. What will its volume be (in liters) at 100oC
Answer:
The volume of the gas at 100°C is 4.6189 liters.
Explanation:
For this problem we are going to use Charles' law. Charles' law states that the volume is directly proportional to temperature given that the pressure is constant. In order to use the equation, the unit of temperature should be in Kelvin.
The working equation is:
=
where V1 and T1 are the initial volume and temperature while V2 and T2 are the final conditions.
Let us convert first the temperatures before solving for the final volume.
To convert Celsius to Kelvin just add 273.15 to temperature in Celsius.
50°C + 273.15 = 323.15 K
100°C + 273.15 = 373.15 K
Solving for the final volume:
V₂ =
V₂ =
V₂ = 4.6189 L
Therefore the final volume of the gas at 100°C is 4.6189 L.
Explanation:
A 400-gram sample of iron, initially at 21 0Cis heated to 65 0C. Determine the energy attained (in Joules) by the iron sample if the specific heat capacity of iron is 0.11 cal/g0C
Answer:
Q = 8100 J.
Explanation:
Hello there!
In this case, according to the given information, we can infer this is a question about calorimetry, and we can use the general heat equation to solve this one:
[tex]Q=mC(T_2-T_1)[/tex]
Thus, we plug in the given mass, specific heat and temperatures to obtain the energy involved in this heating process:
[tex]Q=400g*0.11\frac{cal}{g\°C} (65\°C-21\°C)\\\\Q=1936cal[/tex]
Which converted to Joules turns out to be:
[tex]Q=1936cal*\frac{4.184J}{1cal} \\\\Q=8100J[/tex]
Regards!
plz do it ..i am confused
Answer:
.. ..
O : : C : : O
.. ..
Explanation:
A sample of gas has a pressure of 600 volume of 2.5 L, and a temperature of 22°C . If the pressure is changed to 760 mmHg and the volumes changed to 1.8L what will the new temperature be in K?
A) -4K
B)269K
C)-8K
D)435K
it is A it got to be A)-4k
Explanation:
please help me! I gave max brainly points!
Answer: C
Explanation:
A 0.530 M Ca(OH)2 solution was prepared by dissolving 36.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution thus formed?
Answer:
0.917
Explanation:
Answer:
0.917
Explanation:
Just took the test
10 points. Please help.
A balloon can hold 10 liters of a gas. If you blow up this balloon with 2 moles of oxygen gas at a pressure of 0.76 atmospheres, what is the temperature of the balloon? Pay attention to the unit of pressure used.
Answer:
The temperature of the balloon is 46.34 K.
Explanation:
An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P * V = n * R * T
In this case:
P= 0.76 atmV= 10 Ln= 2 molesR= 0.082 [tex]\frac{atm*L}{mol*K}[/tex]T= ?Replacing:
0.76 atm* 10 L= 2 moles* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] *T
Solving:
[tex]T=\frac{0.76 atm* 10 L}{2 moles* 0.082\frac{atm*L}{mol*K}}[/tex]
T= 46.34 K
The temperature of the balloon is 46.34 K.
If a sample of a gas occupies 5.22 L at 235 oC, what will its volume be at 75 oC if the pressure remains the same?
Answer:
1618.2
Explanation:
235+75=310×75=1618.2
State three ways in which crop rotation is important in crop production
Answer:
1) Plants that fix nitrogen, such as peas and other legumes, improve soil quality for future vegetables planted in the same bed. (2) Alternating shallow-rooted and deep-rooted plants in a given area draws nutrients from the soil at varying depths.
Which describes a possible path a carbon atom could take through the carbon cycle?
O A. Decomposers make coal into carbon. Carbon is released into the atmosphere. Plants take in carbon. Plant matter forms coal.
O B. Plants containing carbon die. Decomposers break down plant matter. Plant matter forms coal. Humans burn coal that releases
carbon into the atmosphere.
OC. Plant matter breaks down carbon in coal. Humans burn coal that releases carbon into the atmosphere. Decomposers break down
carbon in the atmosphere. Carbon in the atmosphere forms coal.
D. Humans burn coal that releases carbon into the atmosphere. Decomposers break down carbon in the atmosphere. Plant matter
breaks down carbon in the atmosphere. Plants containing carbon die.
Answer:
I know for a fact the correct answer is B
Answer:
A
Explanation:
BECAUSE plants use carbon dioxide for photosynthesis.
HELP HELP!!!Calculate the mass of 3.4 moles of nitric acid (HNO3) Explain the process or show your work by including all values used to determine the answer
NO LINKS
Answer:
The mass of nitric acid is, 214.234 grams.
Solution: Given,
Moles of nitric acid = 3.4 moles.
Mole is 3.4 which is substance.
どういたしまして。
お役に立てばよいのですが。
ウェブサイト の ひょうか を して
ください。
24) The charge on the ion is -3
A) nitride
B) sulfate
C) permanganate
D) acetate
E) oxide
Answer:
hbhwehwfhfg
Explanation:
4.) which organic compound has five carbon atom with at least one double bond?
O pentyne
O pentene
O pentane
O butene
Answer:
The answer is pentene.
Explanation:
The nomenclature for an organic compound with 5 carbon atoms will have a -pent prefix.
An organic compound with at least one double bond will have alkene suffix, which is -ene.
Thus, the nomenclature for an organic compound that has 5 carbon atoms with at least one double bond will be pentene.
Question 1
Part A
Describe the sequence of adding ingredients to make the recipe for condensed tomato soup. To mix the ingredients, you have an industrial-sized vat with a capacity of 800 L. You also have the ability to heat what is in the vat and/or stir the vat, both of which require energy and therefore, cost you money. Focus on the fact that the manufacturing process should be time efficient and cost efficient in terms of energy use. Be sure to refer to the solubility charts or graphs that you find for salt and sugar during your research. Finally, presume that the tomato powder has low solubility which is not temperature dependent.
Part B
What changes could be made to optimize the manufacturing process?
Answer:
Part A:
"360 grams of NaCl can be dissolved in 1 L water. So, 2000 grams sugar can be dissolved in 1 L water then we can say that the solubility of salt is lesser in water as to sugar and both heightened by increasing the temperature. If we make a batch of 800 L we can add sugar, 1600 kg at 25 0c. We can add salt is 288 kg at 25 0c and the ingredient tomato is having low solubility."
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/8061-describe-the-sequence-of-adding-ingredients-to-make-the-recipe.html
Part B:
'Manufacturers can generate new value minimize cost and increase operational stability by focusing on 4 broad areas; Management, Supply Circle, Product Design, and Value Recovery.'
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/2807911-what-changes-could-be-made-to-optimize-the-manufacturing-process.html
In order to make tomato soup, the salt NaCl is first added, then followed by sugar and finally the tomato powder.
What are the ingredients required in making tomato soup?Tomato soup is made of the following ingredients:
Tomato powder salt, NaClsugarIn order to make tomato soup, the salt NaCl is first added, then followed by sugar. This is to ensure increase in the boiling point of water and to reduce the heating time of the tomato soup.
The solution is heated to induce more dissolution if solute and finally the tomato powder is added.
In order to optimize the manufacturing process, changes should be made in the design, supply and composition of the soup.
Therefore, an optimized manufacturing process will reduce cost of production.
Learn more about tomato soup at: https://brainly.com/question/21475711
pleassseeeee i’ll give brainiest!!!!!!!!
2KCIO3= 2KCI+3O2
Using the equation above, if 25.6 g of KClare produced, then how many grams of
KCIO3 were consumed? (Type the numerical answer only, no words or label. Use
correct significant figures)
Answer:
The key to chemistry is to change everything to moles. Then when you have the answer in moles change the answer back to grams, liters, or whatever you want.
change 25 grams of potassium chlorate to moles.
calculate the gram molecular mass of potassium chlorate.
Chlorate is Cl with 3 oxygens. ate = saturated. Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron.
1 K x 39 grams/mole
+1 Cl x 35.4 grams/ mole
+3 O x 16 grams/ mole
= 122.4 grams / mole Potassium Chlorate
25
122.4
= moles.
2.05 moles of Potassium Chlorate.
There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride.
2.05 moles of Potassium Chlorate will produce 2.05 moles of Potassium Chloride.
Find the gram molecular mass of Potassium Chloride.
1 K x 39 = 39
+1 Cl x 35.4 = 35.4
= 74.4 grams / mole.
2.05 moles x 74.4 grams/ mole = 15.2 grams
Explanation:
hope this helped :)
Name the property That makes each of the following suitable for the use described metal beaten into thin wires,metals molded in different shapes and metal capable of producing a deep or ringing sound
Answer:
Metals have a property by which they can be beaten into thin sheets. This is called malleability.
Explanation:
one example is silver metal beaten to make silver foil used for decorating. On being struck hard, the metals produce a ringing sound. Due to the Metals that are used for various purposes, from making wires and sheets.
How do you convert from grabs to moles of a substance
1. Divide by the molar mass
2. Subtract the molar mass
3. Add the molar mass
4. Multiple by the molar mass
PLEASE HELP !!!
The correct question is as follows:
How do you convert from grams to moles of a substance
1. Divide by the molar mass
2. Subtract the molar mass
3. Add the molar mass
4. Multiple by the molar mass
Answer: In order to convert from grams to moles of a substance divide by the molar mass.
Explanation:
The number of moles of a substance is the mass of substance in grams divided by its molar mass.
The formula to calculate moles is as follows.
[tex]Moles = \frac{mass}{molar mass}[/tex]
This means that grams are converted to moles when grams is divided by molar mass.
Thus, we can conclude that in order to convert from grams to moles of a substance divide by the molar mass.
Which two geographic features form as a result of continental-continetal convergent
plates?
Answer:
Deep ocean trenches, volcanoes, island arcs, submarine mountain ranges, and fault lines are examples of features that can form along plate tectonic boundaries. Volcanoes are one kind of feature that forms along convergent plate boundaries, where two tectonic plates collide and one moves beneath the other.
Explanation:
I hope it's help u
Please brainiest
30. Cohesion, surface tension, and adhesion are the properties of water molecules that ________. A) increase when temperature increases B) increase when pH increases C) are a result of hydrogen bonding D) are a result of polar covalent bonding
Answer:
C) are a result of hydrogen bonding
Explanation:
Cohesion, surface tension, and adhesion are the properties of water molecules that are a result of hydrogen bonding.
Which of the following processes
release energy?
A. Water evaporating
B. Ice melting
C. steam condensing
D. wax melting
What do you think of timothee chalamet statistics vid
Answer: EH, It was okay.
Explanation:
Answer:
It was so creative to finish up a statistics project with a statistics song- remarkable✌
Explanation:
Balance the equation
H2C2O2 + KOH——>K2C2O4 + H2O
Answer:
H2C2O2 + 2KOH ----- K2C2O4 + 2H2O
How much heat, in Joules, is needed to raise the temperature of 150 g of manganese by 22°C? (cmanganese = 0.477 J/g°C)
Answer:
1574joules of heat
Explanation:
Q= mc( T2-T1)
=150 * 0.477 *22
=1574 joules
1574.1 Joules heat is needed to raise the temperature of 150 g of manganese by 22°C.
Specific HeatThe quantity or amount of heat per unit mass required to raise the temperature of a body by one degree Celsius is known as specific heat. The unit of specific heat are joules or calories per gram per degree Celsius. Specific heat is an intensive property.
Calculate heat to raise temperature
Relationship between temperature and heat is expressed as:
Q = mcΔT
where,
Q is heat energy in Joules (J)
m is mass (in grams)
c is specific heat in J/g°C
ΔT is change in temperature
Now, put the values in above formula, we get that
Q = 150 × 0.477 × 22
Q = 150 × 10.494
Q = 1574.1 Joules
Thus, we can say that 1574.1 Joules is needed to raise the temperature of 150g of manganese by 22°C.
Learn more about the specific heat here: https://brainly.com/question/21406849
#SPJ2
HELP PLEASE
1. Locations where volcanoes form far from plate boundaries are called
A. islands
B. hot spots
C. divergent zones
Which component of a river system is made of streams and small rivers that feed into a large river? Which component of a river system is also called a drainage basin? Which component of a river system is a ridge between water flowing in two directions?
Explanation: A river drainage basin is an area drained by a river and all of its tributaries. A river basin is made up of many different watersheds. A watershed is a small version of a river basin. Every stream and tributary has its own watershed, which drains to a larger stream or wetland.
The component of a river system is made of stream and small rivers that feed into a large river is tributaries. The component of a river system also called a drainage system is watersheds. The component of a river system is a ridge between water flowing in two directions is divided.
What are tributaries and watersheds?
Tributaries are the small rivers or streams that are made from the big or main river.
Watershed is the place where the rainwater from all river lines come to a point.
Thus, the correct options are tributaries, watersheds, and divided.
Learn more about tributaries and watersheds
https://brainly.com/question/1040502
#SPJ2