Explanation:
If you look back at the formula ( SO2 ), you can see that there is one sulfur and two oxygens present. Therefore, the molar mass of sulfur dioxide is [1 × 32.1 + 2 × 16.0] = 64.1 g/mol.
A 1,600-milliliter bucket of paint is at a temperature of 70°F. Then the paint is divided equally into four smaller buckets. Each bucket is at 70°F before the paint is poured. The temperature of each bucket is about _____ the temperature of the original bucket of paint. a. The same as b.Four times c.One-fourth
Answer:
Same.
Explanation:
The temperature of each 400mL bucket is about the same as the temperature of the original bucket of paint.
This is because the temperature is an intrinsic property.This means that temperature is independent of the quantity of matter. Therefore, the temperature of paint inside the bucket is not dependent on the amount of paint present.
What is the molar mass of carbon?
1. How many moles of HCl are in 7.80 X 1022 molecules? Answer:___0.13 moles of HCI
Answer: 7.80×[tex]10^{22}[/tex][tex]\frac{1}{6.02*10^{23} }[/tex] =.13
Explanation:
The number of moles that are present in 7.80 × 10²² molecules of HCl is 0.13 moles
What is the number of moles?The number of moles of a substance is defined as the mass of the substance divided by the molar mass of such a substance. Also, one mole of a substance is synonymous and equal to 6.023 × 10²³ Avogadro's number.
So, If 1 molecule of HCl = 6.023 × 10²³ molex molecules of HCl = 7.80 × 10²² molecules:Therefore, the number of moles that are present in 7.80 × 10²² molecules of HCl can be computed as:
[tex]\mathbf{=\Big(7.80 \times 10^{22} \times \dfrac{1}{6.02\times 10^{23} }\Big)\ moles}[/tex]
= 0.12956 moles
≅ 0.13 moles of HCl
Learn more about the number of moles of a substance here:
https://brainly.com/question/15356425
How many atoms of beryllium are equal to 0.39 moles of beryllium?
Answer:
2.35 x 10²³atoms
Explanation:
Given parameters:
Number of moles of Be = 0.39moles
Unknown:
Number of atoms = ?
Solution:
To solve this problem:
1 mole of a substance contains 6.02 x 10²³ atoms
0.39 mole of Be will contain 0.39 x 6.02 x 10²³ = 2.35 x 10²³atoms
The role of an organism in its habitat
A. host
B. prey
C. niche
D. adaptation
Answer:
C. Niche
Explanation:
The role of an organism in it's habitat is it's niche.
chemistry question help please
Answer:
xii. B. Smelting
xiii. D. Carbon
Explanation:
Smelting is known to be a process by which a metal is gotten. It is gotten either as the element or as a simple compound. This is obtained from metal's ore by heating. The heating can be done ordinarily in the presence of oxidizing agents, like air, or reducing agents, carbon e.g coke.
Zinc is gotten after Zinc oxide is heated in the presence of carbon.
This process is smelting.
Concentrated tetraoxosulphate acid is a strong dehydrating agent. It has the ability to char wood, paper, or sugar, leaving a carbonaceous residue. The charring effect is as a result of the carbon that is found in the wood.
The acid sucks in the oxygen and hydrogen, leaving behind the carbon; this results in the charring effect.
PLEASE ANSWER ASAP!!!!!!!!!!!! The Relative Surface Gravity is 27.551 on _____.
Saturn
the Moon
the sun
Jupiter
Answer:
its the sun
Explanation:
Identify this parasitic organism.
Answer:
Schistosoma or blood fluke
Explanation:
Parasitic organisms are defined as the organisms that depends on other organisms body called host for their nutrition and harm the host body.
The given image is of Schistosoma that is commonly known as blood flukes. Schistosoma are flatworms which causes group of infections in humans known as schistosomiasis. Schistosoma is a water-borne parasite and found in veins near the human intestine.
Hence, the correct answer is "Schistosoma or blood fluke".
What is the product(s) in the reaction below?
Answer:
imma go with the answer B
The product in the reaction [tex]\rm Zn + 2HCl \rightarrow[/tex] is [tex]\rm ZnCl_2 + H_2[/tex]. The correct answer is option D.
A reaction is a process that involves the transformation of one or more substances into one or more different substances.
The reaction between zinc (Zn) and hydrochloric acid (HCl) is a classic example of a single displacement reaction. In this reaction, zinc reacts with hydrochloric acid to produce zinc chloride ([tex]\rm ZnCl_2[/tex]) and hydrogen gas ([tex]\rm H_2[/tex]).
The balanced chemical equation for this reaction is:
[tex]\rm Zn(s) + 2HCl(aq) \rightarrow ZnCl_2(aq) + H_2(g)[/tex]
Therefore, the product of the reaction between zinc and hydrochloric acid is zinc chloride ([tex]\rm ZnCl_2[/tex]) and hydrogen gas ([tex]\rm H_2[/tex]). Option D is the correct answer.
Learn more about reaction here:
https://brainly.com/question/16737295
#SPJ6
Does anyone know what I should put for number 2 if you KNOWW plssss
Question 1
Review
Which laboratory equipment is correctly paired with the unit it measures?
Answer:
Cilindros graduados
Explanation:
Son una herramienta de medición primaria para el volumen de un líquido, y tiene varias marcas hacia arriba y hacia abajo a lo largo del contenedor con incrementos específicos. Los cilindros graduados vienen en muchos tamaños; entre más pequeños sean de diámetro, más específicas serán las mediciones de volumen. Al leer el volumen de un cilindro graduado, notarán que el líquido parece tener una muesca; el líquido alrededor de los bordes será más alto que el líquido en el centro, inclinándose hacia abajo como los lados de un trampolín cuando alguien está parado en el medio. Esto se llama el menisco. Alineen el punto más bajo del menisco con la marca más cercana, manteniendo el nivel del cilindro para leer correctamente el volumen.
What patterns do you notice between the three maps? Using the concepts
you've learned in this lesson, construct an explanation for these patterns in your
Science Notebook or in the space below.
Answer:
A spatial pattern is a perceptual structure, placement, or arrangement of objects on Earth. It also includes the space in between those objects. Patterns may be recognized because of their arrangement; maybe in a line or by a clustering of points.
Explanation:
why can mosquitos stand on water?
A-The mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension.
B-The mosquito is able to walk on the water due to the attraction between water molecules and other non-water molecules, creating surface tension.
Answer:
Mosquitos can stand on water because;
A. The mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension
Explanation:
Surface Tension is the surface property of a liquid which is due to the cohesive forces of attraction between its molecules, that enables it to withstand an external shearing force
The molecules in a liquid maintain a cohesive force between adjacent molecules that keeps all the molecules together such that the liquid has a defined volume
On the surface of the liquid, the cohesive forces between the molecules are shared by only between the adjacent molecules and molecules which are under the surface, and therefore, the attraction is much stronger such that the surface of the liquid is in tension, which is called the surface tension of the liquid
Therefore, the mosquito is able to walk on the water due to the attraction between multiple water molecules, creating surface tension.
a clown in the park gave a child a balloon filled with 7.00 L of helium at 301 K. What will the volume of the balloon be when the child takes it into an air conditioned house at 295 K?
Answer:
6.9L
Explanation:
The pressure in a bicycle tire is 105 psi at 25˚C in Fresno. You take the bicycle up to Huntington, where the temperature is – 5˚C. What is the pressure in the tire?
Answer:
94.4 Psi
Explanation:
Given that;
P1 = 105 psi
T1 = 25˚C + 273 = 298 K
P2 = ?
T2 = – 5˚C + 273 = 268 K
P1/T1 = P2/T2
P1 T2 = P2T1
P2 = P1T2/T1
P2 = 105 * 268/298
P2= 94.4 Psi
According to the chemical formula shown below, all of the following elements are found in phosphoric acid EXCEPT
A. Hydrogen
B.Oxygen
C.Phosphorus
D.Potassium
Please asap i need help
The mole is used in chemistry
A) to count large numbers of very small particles, such as atoms or molecules.
B) to relate the mass and the number of particles of a substance to each other.
C) to relate the mass and the volume of a substance to each other.
D) all of these are true.
The temperature of the system is highest when it is a
A. gas
B. liquid
C. plasma
D. solid
Answer:
gas
Explanation:
its either gas or plasma but gas should be it bc liquid and solid are cold
give reason unit of volume is a derived unit
Answer:
A derived unit is defined as the unit that is created from a product of SI base units. Volume is an example of derived unit because it is not possible to measure volume directly using any measuring device For eg., Volume of water in bucket is can not be measured using rule, or scale, or any other measuring device.
Hence, volume is a derived unit.
PLEASE HELP!!
How many moles are present in 431.56 grams of sodium bicarbonate ( NaHCO3)?
Molar mass of sodium bicarbonate (NaHCO3) = 84.01 g/mol
Answer:
5.14mole
Explanation:
Given parameters:
Mass of sodium bicarbonate = 431.56g
Unknown:
Number of moles = ?
Solution:
To find the number of moles, we use the expression below:
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass = 84.01g/mol
Number of moles = [tex]\frac{431.56}{84.01}[/tex] = 5.14mole
Please help quick
1) How much heat does 23.0 g of water absorb as its temperature increases from 25.4 °C to 42.8 °C?
2) A sample of unknown metal has a mass of 120.7 g. As the sample cools from 90.5 °C to 25.7 °C, it releases 7020 J of energy. What is the specific heat of the sample?
Answer:
c = 0.898 J/g.°C
Explanation:
1) Given data:
Mass of water = 23.0 g
Initial temperature = 25.4°C
Final temperature = 42.8° C
Heat absorbed = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
Specific heat capacity of water is 4.18 J/g°C
ΔT = 42.8°C - 25.4°C
ΔT = 17.4°C
Q = 23.0 g × × 4.18 J/g°C × 17.4°C
Q = 1672.84 j
2) Given data:
Mass of metal = 120.7 g
Initial temperature = 90.5°C
Final temperature = 25.7 ° C
Heat released = 7020 J
Specific heat capacity of metal = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 25.7°C - 90.5°C
ΔT = -64.8°C
7020 J = 120.7 g × c × -64.8°C
7020 J = -7821.36 g.°C × c
c = 7020 J / -7821.36 g.°C
c = 0.898 J/g.°C
Negative sign shows heat is released.
what are alkenes and there chemical property
Answer:
Alkenes contain a double bond that is composed of one sigma and one pi bond between two carbon atoms. The sigma bond has similar properties to those found in alkanes , while the pi bond is more reactive. The carbon atoms in the double bond are sp² hybridized , forming a planar structure.
Explanation:
Believe it!!!
El salmón percibe la presencia del 2-feniletanol (C5H5-CH2-CH2-OH) en el agua, en cantidades tan bajas como 0.03 mole en cien trillones (1*10^18) de litros de agua, ¿cuál es la masa, en gramos, de esa sustancia? ¿Qué cantidad de moléculas equivale a esa sustancia?
Answer:
3.66 g de 2-feniletanol (C5H5-CH2-CH2-OH)
1.8 * 10 ^ 22 moléculas
Explanation:
Sabemos que podemos obtener la masa de una sustancia a partir del número de moles presentes de la siguiente manera;
número de moles = masa / masa molar
masa molar de 2-feniletanol (C5H5-CH2-CH2-OH) = 122,16 g / mol
masa = 0.03 moles * 122.16 g / mol = 3.66 g de 2-feniletanol (C5H5-CH2-CH2-OH)
Si 1 mol = 6.02 * 10 ^ 23 moléculas
0.03 moles = 0.03 moles * 6.02 * 10 ^ 23 moléculas = 1.8 * 10 ^ 22 moléculas
1. Why was a mole created?
Answer:
Avogadro proposed that equal volumes of gases under the same conditions contain the same number of molecules, and hypothesis that proved useful in determining atomic and molecular weights and which led to the concept of mole.
Explanation:
"The mole is important because it allows chemists to work with the subatomic world with macro world units and amounts. Atoms, molecules and formula units are very small and very difficult to work with usually. However, the mole allows a chemist to work with amounts large enough to use."
- Source socratic.org
Hope this helped!
Help!!!!
The diagram represents waves A,B,C, and D traveling in the same medium.Which two waves shown here have the same wavelength
Answer: A and C
Explanation: because wavelength is the distance over which the wave's shape repeats.
Wave A and wave C have the same wavelength as they have the same distance between the two adjacent crests or troughs. Therefore, option (2) is correct.
What are frequency and wavelength?The wavelength of the wave can be defined as the distance between consecutive adjacent points of the same phase on the wave. The separation between the two adjacent crests or troughs on a wave is known as wavelength.
The S.I. unit of the wavelength can be represented in meters. Wavelength is a characteristic of both standing waves and traveling waves, as well as other spatial wave patterns.
The frequency of the wave can be demonstrated as the number of oscillations of a wave in 1 second. The international S.I. units of the frequency can be represented as per second or Hertz.
The relationship between wavelength, speed of light (c), and frequency (ν) is: c = νλ
Therefore, wave A and wave B have the same wavelength in the given diagram.
Learn more about wavelength and frequency, here:
brainly.com/question/18651058
#SPJ5
There can be four equivalent best resonance structures of
A.NO3
B.S032-
C.PO43
D.NO2
E.CIO3
There are four equivalent best resonance structures of (PO₄)₃ according to the concept of resonance.
What is resonance?
The phenomenon of resonance which is also called mesomerism is the ability of the molecules or ions to explain the bonding in them by the combination of several canonical structures.
It is an extension of Lewis structures to describe bonding in chemical species.The resonance structures also include the fractional charges present on the atom .They are capable of of depicting delocalized electrons which are unable to be depicted by single Lewis structure.
Molecules with extended pi system are well defined by resonance hybrids.It is a way of giving description of bonding in certain molecules.When there is passage of electrons through pi structures which are opposing ,resonance occurs.
Learn more about resonance,here:
https://brainly.com/question/23287285
#SPJ2
Compounds that are ductile and excellent conductors of electricity have *
covalent bonds.
ionic bonds.
isotopic bonds.
metallic bonds.
Answer:
metallic bonds.
Explanation:
Generally, compounds that are ductile and excellent conductor of electricity have metallic bonds between them.
These compounds are usually metals.
Metallic bond join that atoms of metals and alloys together. The formation of this type of bond is favored by large atomic radius, low ionization energy and a large number of electrons in their valence shell. The physical properties of metals like ductility, malleability, electrical and thermal conductivity all results from metallic bonds.Most of the volume of a gas is ______________________.
Group of answer choices
A. a vacuum
B. dark
C. gone
D. empty space
Please help!
Answer:
D. empty space
Explanation:
Most of the volume of a gas is empty space, which allows gases to be easily compressed. Gas particles are in constant motion, moving rapidly in straight paths. When gas particles collide, they rebound and travel in new directions. Every time they hit the walls of the container, they exert pressure.
How the lead (II) carbonate can be separated and collected from the product mixture with ammonium nitrate?
Answer:
fgedhwkmgfvhcdnxj
Explanation:
gtryijdohuygfvbhgfy
How can calcium oxide change directly to limewater?
Wants equation and observation
Answer:
Lime(Calcium Oxide) is a white solid with strongly basic properties.Lime reacts readily with water to produce slaked lime,which is the chemical compound calcium hydroxide.....
When carbon dioxide gas is passed through or over limewater,it turns milky due to the formation of calcium carbonate.