PLEASE HELP!
A 9kg particle is initially at rest at x=0. It is subject to a single force Fx (N) which varies with x (m) as shown in the
diagram
F
2
1
0
ББ by
x
- 1
1
-2
The kinetic energy of the particle when it is at x = 3 m is:

Answer:

Heat Loss = 5 kg * 700 deg K * 220 J / (kg*deg K) = 7.70E5 J

Since there are 4.186 J/cal

Heat Loss = 7.70E5J / 4.186 J/cal = 1.84E5 cal

Heat Gain = 2000 g * 85 deg K / cal / (deg K g) + M * 540 cal/g

Heat Gain = 1.70E5 cal + M * 540 cal/g

M = (1.84 - 1.70) E5 g / 540

25.9 g

25.9 g or 25.9 cm^3 or .0259 L   of water will boil away

Answer: Are these free point?

Explanation:

Hello!

To solve, we can begin by using the kinematic equation:

[tex]d = v_it + \frac{1}{2}at^2[/tex]

Where:

vi = initial velocity (m/s)

t = time (s)

a = acceleration (in this case, due to gravity. g = 9.8 m/s²)

Since the object falls from rest, the initial velocity is 0 m/s.

[tex]d = \frac{1}{2}at^2[/tex]

Plug in the given values:

[tex]d = \frac{1}{2}(9.8)(3.5^2) = \boxed{60.025 m}[/tex]

Answer:

D1 FG 12 15×AG+5T×G7+3F

The definition of volume modulus and the variation of pressure with depth allows to find the result for the variation of the volume of the coin is:

The pressure with the depth is given by the relation

         P = P₀ + ρ g h

Where P is the pressure, ρ is the density anf h depth.

The size of the bodies is determined by the distance of their atomic and molecular bonds, therefore the size of the bodies changes under external interations, in the case of hydrostatic pressure a constant called volumetric modulus is defined.

            [tex]B = - \frac{\Delta P}{\frac{\Delta V}{Vo} } \\\Delta V = - \frac{\Delta P }{B} \ V_o[/tex]

Where ΔP is the pressure change, V₀ and V are the volume change and the initial volume of the body, the negative sign is introduced so that the volumetric modulus is a positive quantity.

They indicate the diameter and thickness of the coin (d = 6.1 cm and e =0.20 cm) on the sea surface and the depth to which it is submerged

h = 770 m

Let's look for the volume of the coin.

          V₀ = π r² h = [tex]\pi \ \frac{d^2}{4} \ e[/tex]  

          V₀ = [tex]\pi \ \frac{0.061^2 }{4} \ 0.002[/tex]  

          V₀ = 5.84 10-6 m³

Let's find the pressure at the depth of y = 770 m,  the density of sea water is ρ = 1025 kg / m³, the pressure at the surface is the atmospheric pressure P₀ = 1 10⁵ Pa, the volumetric modulus of water is B = 0.21 10¹⁰ Pa.

          P = 1 10⁵ + 1025 9.8 770

          P = 1 10⁵ + 7,735 10⁶

          P = 7.84 10⁶ Pa

Let's calculate

          ΔV =[tex]- \frac{1 \ 10^5 - 7.84 \ 10^6 }{0.21 \ 10^{10}} \ 5.845 \ 10^{-6}[/tex]  

          ΔV = 2.15 10-8 m³

In conclusion using the definition of volume modulus and the variation of pressure with depth we can find the result for the variation of the volume of the coin is:

Learn more here:  brainly.com/question/22138043

Explanation:

Fgravity = G*(mass1*mass2)/D²

G is the gravitational constant, which has the same value throughout our universe.

D is the distance between both objects.

so, now some numbers change

Fgravitynew = G*((1/3)*mass1*2*mass2)/(2D)² =

= G*((2/3)*mass1*mass2)/(4D²) =

= (2/3)* (G*(mass1*mass2)/D²) / 4 =

= ((2/3)/4) * G*(mass1*mass2)/D² =

= (2/12) * Fgravity = Fgravity/6

the new gravitational force will be 16/6 = 8/3 units.

Answer:

Explanation:

1 Object C has an acceleration that is greater than the acceleration for D.

2 B

3 17M

4 The velocity is zero.

5 a straight line with negative slope

just took it

The magnitude of the load L on the crane before the collapse is 3211.81 N

To determine the magnitude of the load on the crane (L), we will need to make use of the equilibrium conditions of the torque.

It is always an ideal process to list out all the parameters given as this will let you understand how you can determine the answer to the question from the given parameters.

From the given information;

From the question;

the angle at which the crane is positioned can be determined by taking the tangent of the angle θ. i.e.

[tex]\mathbf{tan \ \theta = \dfrac{h}{d-s}}[/tex]

[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{h}{d-s} \Big )}[/tex]

[tex]\mathbf{\theta = tan^{-1} \Big ( \dfrac{2.070 }{5.580 - 0.522} \Big )}[/tex]

[tex]\mathbf{\theta =22.26^0}[/tex]

Consider the equilibrium conditions of the torques with respect to the magnitude of the load at point P.

∴

[tex]\mathbf{Tsin \theta (d-s) - W_L (d-x) -(Mg) (\dfrac{d}{2}) = 0}[/tex]

By making the magnitude of the load [tex]\mathbf{W_L}[/tex] the subject of the formula, we have:

[tex]\mathbf{W_L = \dfrac{Tsin \theta (d-x) -(Mg) (\dfrac{d}{2})}{ (d-s) } }[/tex]

[tex]\mathbf{W_L = \dfrac{(11650 )sin (22.26) (5.580-1.350) -(88.50\times 9.81) (\dfrac{5.580}{2})}{ (5.580-0.522) } }[/tex]

[tex]\mathbf{W_L = 3211.81 \ N }[/tex]

Therefore, we can conclude that the magnitude of the load is 3211.81 N

Learn more about the magnitude of an object here:

https://brainly.com/question/24623437?referrer=searchResults

Answer:

Explanation:

I hope it's helpful for you

Answer:

[tex]k.e. = \frac{1}{2}mv {}^{2} \\ 800= \frac{1}{2} \times 40 \times v {}^{2} \\ 800 = 20v {}^{2} \\ v {}^{2} = 400 \\ v {}^{2} = 20ms {}^{ - 1} [/tex]

k.e. = kinetic energy

hope helpful <3

Answer:

None of these elements.

L=1m

=2mm²=(2/1000²)=2(10^-6)m

y=4x10¹¹N/m²

∆l=2mm=2/10.00=0.002m

=(4x10¹¹x2x10^-6x2x10^-3)÷1m

=16x10¹¹-⁶-³

=16x10¹¹-⁹

=16x10²

=1600N

where a=cross sectional area=2x10^-6m

C=2mm= 2x10^-3m

L=1m

hope it helps

Answer:

Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.

Explanation:

Answer:

a battery, wires, and a switch.

Explanation:

All circuits include?

A.

The energy of the hot water is 482630400 J

Using Q = mcΔT where Q = energy of hot water, m = mass of water = ρV where ρ = density of water = 1000 kg/m³ and V = volume of water = 189 L = 0.189 m³,

c = specific heat capacity of water = 4200 J/kg-°C and ΔT = temperature change of water = T₂ - T₁ where T₂ = final temperature of water = 608 °C. If we assume the water was initially at 0°C, T₁ = 0 °C. So, the temperature change ΔT = 608 °C - 0 °C = 608 °C

Substituting the values of the variables into the  equation, we have

Q = mcΔT

Q = ρVcΔT

Q = 1000 kg/m³ × 0.189 m³ × 4200 J/kg-°C × 608 °C

Q = 482630400 J

So, the energy of the hot water is 482630400 J

B.

The elevation the mass would have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water is 49248 m.

Using the equation for gravitational potential energy ΔU = mgΔh where m = mass of object = 1000 kg, g = acceleration due to gravity = 9.8 m/s² and Δh = h - h' where h = required elevation and h' = zero level elevation = 0 m

Since the energy of the mass equal the energy of the hot water, ΔU = 482630400 J

So, ΔU = mgΔh

ΔU = mg(h - h')

making h subject of the formula, we have

h = h' + ΔU/mg

Substituting the values of the variables into the equation, we have

h = h' + ΔU/mg

h = 0 m + 482630400 J/(1000 kg × 9.8 m/s²)

h = 0 m + 482630400 J/(9800 kgm/s²)

h = 0 m + 49248 m

h = 49248 m

So, the elevation the mass would have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water is 49248 m.

Learn more about heat energy here:

https://brainly.com/question/11961649

Km values are standardized because half the Vmax (Vmax/2) is more informative than Vmax. This value (Km) can be used to calculate the affinity of the enzyme by a given substrate.

The Km (Michaelis constant) of the enzyme refers to the value in which the concentration of substrate is equal to half of its maximum velocity (Vmax/2).

This value (Km) is inversely proportional to the affinity of an enzyme by a given substrate.

An enzyme showing a high Km also exhibits a low affinity for its specific substrate, and thereby this enzyme requires a high concentration of the substrate to reach its maximum velocity (Vmax).

In consequence, the Km value is a more informative value than the maximum velocity (Vmax), which only indicates the concentration of an enzyme catalyzing a reaction under ideal conditions.

Learn more in:

https://brainly.com/question/5182881

Answer:

20 m/s at -35°

Explanation:

Ignoring air resistance, the initial vertical velocity will be reversed and the initial horizontal velocity will remain constant.

Answer:

4600 Kg/m³

Explanation:

Volume of block=5m³

Mass of block= 920 kg/m³

Density=mass × volume

=920 × 5³

=4600 /m³

The density of ice is 4600 Kg/m³

___________________________________

(Hope this helps can I pls have brainlist (crown)☺️)

Explanation:

Solution:

Here

volume=5

Density=920

Density =Mass/Volume

or,Mass=Density*Volume

or,M=920*5

so,M=4600kg

Explanation:

These prefixes are very commonly used in naming chemical compounds.

Di- means two.

For example, carbon dioxide's formula is be written as [tex]\text{CO}_2,[/tex] and it has 2 oxygen atoms, hence "di-oxide."

Tetra - means four.

For example, carbon tetrachloride's chemical formula is written as [tex]\text{CCl}_4[/tex], and there are four chlorine atoms

Deca- means ten

For example, lanthanum decahydride's chemical formula is written as [tex]\text{LaH}_{10}.[/tex] In this case there are 10 hydrogen atoms for every lanthanum atom.

Hepta - means seven

For example, iodine heptafluoride is written as [tex]\text{IF}_7[/tex]. Note the seven fluorine atoms attached to the iodine atom, hence the name "hepta-fluoride."

The angular speed of the merry-go-round reduced more as the sandbag is

placed further from the axis than increasing the mass of the sandbag.

The rank from largest to smallest angular speed is presented as follows;

[m = 10 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 20 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 0.5·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 1.0·R]

Reasons:

The given combination in the question as obtained from a similar question online are;

1: m = 20 kg, r = 0.25·R

2: m = 10 kg, r = 1.0·R

3: m = 10 kg, r = 0.25·R

4: m = 15 kg, r = 0.75·R

5: m = 10 kg, r = 0.5·R

6: m = 40 kg, r = 0.25·R

According to the principle of conservation of angular momentum, we have;

[tex]I_i \cdot \omega _i = I_f \cdot \omega _f[/tex]

The moment of inertia of the merry-go-round, [tex]I_m[/tex] = 0.5·M·R²

Moment of inertia of the sandbag = m·r²

Therefore;

0.5·M·R²·[tex]\omega _i[/tex] = (0.5·M·R² + m·r²)·[tex]\omega _f[/tex]

Given that 0.5·M·R²·[tex]\omega _i[/tex] is constant, as the value of  m·r² increases, the value of [tex]\omega _f[/tex] decreases.

The values of m·r² for each combination are;

Combination 1: m = 20 kg, r = 0.25·R; m·r² = 1.25·R²

Combination 2: m = 10 kg, r = 1.0·R; m·r² = 10·R²

Combination 3: m = 10 kg, r = 0.25·R; m·r² = 0.625·R²

Combination 4: m = 15 kg, r = 0.75·R; m·r² = 8.4375·R²

Combination 5: m = 10 kg, r = 0.5·R; m·r² = 2.5·R²

Combination 6: m = 40 kg, r = 0.25·R; m·r² = 2.5·R²

Therefore, the rank from largest to smallest angular speed is as follows;

Combination 3 > Combination 1 > Combination 5 = Combination 6 >

Combination 2

Which gives;

[m = 10 kg, r = 0.25·R] > [m = 20 kg, r = 0.25·R] > [m = 10 kg, r = 0.5·R] > [m =

10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R] > [m = 10 kg, r = 1.0·R].

Learn more here:

https://brainly.com/question/15188750

Answer:

batteries in parallel connection and bulbs in serial connection

To get the dimmest bulb with two batteries and two bulbs you would connect the batteries in parallel and the bulbs in series.

When two-terminal components and electrical networks that can be connected in series or parallel. This will result in two terminals in the electrical network, and may themselves participate in a series or parallel topology. When a two-terminal "object" is an electrical component or electrical network is a matter of perspective.

A circuit is said to be in series when the same current flows through all the components in the circuit where the current has only one path. A circuit is said to be parallel when there are multiple paths for the electric current to flow through it where the components which are part of the parallel circuit will have a constant voltage across all their ends.

Thus, to get the dimmest bulb with two batteries and two bulbs you would connect the batteries in parallel and the bulbs in series.

Learn more about Parallel and series circuits, here:

https://brainly.com/question/3386214

#SPJ5

Answer:

Explanation:

Conservation of momentum

115v + 133(0) = (115 + 133)1.35

v = 2.911304...

v= 2.91 m/s east

Answer:

The velocity east is 2.91

Explanation:

Fill in the box

2.91

Answer:

78

Explanation:

x=xi+vi(t)+1/2a(t)^2

x=10+16(4)+1/2(0.50)(4)^2

x=74+4

x=78 m

: [tex] \implies[/tex] The Photosynthesis is the process of capturing light energy and transforming it into chemical energy. Green plants and several other organisms use light energy and convert carbon dioxide and water into glucose. In this process, oxygen is produced as a by-product

→ We also who how it's process occur

Photosynthesis Equation

6CO2 + 6H2O = C6H12O6 + 6O2

Importance of Photosynthesis

Photosynthetic Pigments

The Factors Affecting Photosynthesis

Various factors influence/affect the photosynthesis process. These are:

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Hope it's helps !!

Answer:

In 1924 Louis de Broglie introduced the idea that particles, such as electrons, could be described not only as particles but also as waves. This was substantiated by the way streams of electrons were reflected against crystals and spread through thin metal foils.

Explanation:

I know I probably didn't answer your question, I just used all of my knowledge that I learned about Louie De Broglie. Hope it helps!

20 seconds

Explanation:

Let [tex]x_a[/tex] be the distance traveled by the accelerating car and [tex]x_c[/tex] be the distance traveled by the car moving with a constant velocity. When they cover the same distance, we can write

[tex]x_a = x_c \Rightarrow v_{0a}t + \frac{1}{2}at^2 = v_ct[/tex]

where [tex]v_c[/tex] is the velocity of car moving at a constant rate and a is the acceleration of the accelerating car. Since the accelerating car started from rest, then [tex]v_{0a}[/tex] is zero so our equation above simplifies to

[tex]\frac{1}{2}at^2 = v_ct[/tex]

Note that the variable t cancels out so solving for t, we get

[tex]\frac{1}{2}at = v_c \Rightarrow t = \dfrac{2v_c}{a}[/tex]

Plugging in the given values,

[tex]t = \dfrac{2(20\:\text{m/s})}{2\:\text{m/s}^2} = 20\:\text{s}[/tex]

Answer:

Explanation:

s = s₀ + v₀t + ½at²

s = 0 + 0(15) + ½(6)(15²)

s = 675 m

Not sure what the free fall acceleration is needed for, but if the object is dropped from a high enough point, it will travel in 15 seconds

s = ½10(15²) = 2250 m  if air resistance is ignored

Answer:

physics that deals with the mechanical action or relations of heat.

The magnitude of the total initial velocity of the rocket is determined as 9.82 m/s.

The magnitude of the total initial velocity of the rocket is calculated as follows;

V = D/T

where;

V = (54)/(5.5)

V = 9.82 m/s

Thus, the magnitude of the total initial velocity of the rocket is determined as 9.82 m/s.

Learn more about velocity here: https://brainly.com/question/4931057

#SPJ2