You should read the lifts safety and operating instructions only if you havent used the automotive lift before

Answers

Answer 1
False

Safety and operating instructions should be reviewed every time before usage. Following a checklist saves life, limb and equipment.

Related Questions

Question* Once we have have completed the excavation , constructed forms for our footing and properly installed the rebar , what is the next step in the construction ?


NEED HELP ASAP

Answers

Concreting of Column and Bitumen Paint Applications

Which of the following uses technology that converts echoes that bounce off the tissues and organs of the body into a visual image?


magnetic resonance

computed tomography

sonography

nuclear medicine

Answers

Answer:

sonography

Explanation:

"Sonographers, meanwhile, are trained in using sound waves to take images of tissues and organs in the body. These technologists, using specialized equipment, send high-frequency sound waves through the patient’s body. Consequently, echoes bounce off the tissues and organs and a special computer converts the echoes into visual images. For more information on careers in radiologic technology, visit the American Society of Radiologic Technologists’ website. This is a professional organization for people employed in radiation therapy and medical imaging."

2. Explain how fossil fuels are form

Answers

Answer:

Found from interent:

Explanation:

Briefly explain why someone would choose a career in the geologic sciences, with at least three reasons.

Answers

Answer:

Someone could chose the career of being a geologic scientist because they can discover new things about the world.And find new things about it that wearnt discovered previously.

Explanation:

New species

New cures

New lands

Answer:

The correct answer would include that there is a need for viable energy sources, but the techniques for mining them are not yet perfected.

Explanation:

Because of this, there is much room for improvement. This is a currently growing field with high incomes possible. There is a need to find better, safer ways to clean up spills. Less dangerous ways can be designed to make such tasks more efficient.

Plzzzzz help ASAP 50 points for the answer






4. Explain the differences between case studies, case histories, and case problems.

Answers

The guy above me is right fyi and its not 50 points

Which of the following men used sketches based on telescopic imagery to present his findings in astronomy?


Galileo

Escher

Aldrin

Copernicus

Answers

Galileo would be the correct answer, hope this helps :))

The answer is:

Galileo

Match the given traits to their definitions.

Answers

Answer:

where the question

Explanation:

Answer:

?

Explanation:

Can someone tell me the answers I’m confused I’ll give brainlist and points if your going to be rude or not help don’t type:)!!!

Answers

Both are a I think correct me if I’m wrong

Answer:

B,             C,                                  A, D

Explanation:

Your welcomed

What is an item an electrical and mechanical engineer make

Answers

Answer:

any sort of robot as in the Da Vinci surgical robot I would think a mechanic and electrical because there is power going through it so a electrician or a electrical engineer and a mechanical engineer so it can turn and move  

Explanation:

Which of the following is an example of an observation?


The monkey is eight years old.

The monkey weighs twenty pounds.

The monkey is brown.

The monkey is two feet tall.

Answers

the monkey is brown!
The monkey is brown, because when you look at it without doing anything you can clearly notice that hope this helps

what is your favorite concole?

Answers

Answer:

Ps4

Explanation:

Answer:

ps4

Explanation:

Select the creative imaging fields that require knowledge of programming.


computer engineer

video game designer

animator

video game programmer

video game artist

graphic designer

Answers

Video game designer for sure

I think:

— video game programmer— video game designer— computer engineer

Please tell me if it's right.

What does it mean if a manufacturing company "retools"?

Answers

Answer:

It mean to equip more tools.

Explanation:

I hope this helps.

Answer:

When a manufacturing company "Retools", they simply are restocking in tools, organizing their workspace, and modifying or changing anything that needs to be changed.

Why do organisms differ in their methods of reproduction?

Answers

Asexual reproduction yields genetically-identical organisms because an individual reproduces without another. In sexual reproduction, the genetic material of two individuals from the same species combines to produce genetically-different offspring; this ensures mixing of the gene pool of the species.

Asexual reproduction yields genetically-identical organisms because an individual reproduces without another. In sexual reproduction, the genetic material of two individuals from the same species combines to produce genetically-different offspring; this ensures mixing of the gene pool of the species.that’s why

Researchers at the University of__________modified the iPhone to allow it to create medical images.
A. California
B. Wisconsin
C. Florida

Answers

Answer:

B

Explanation:

I'm so sorry if this is wrong. This is what I think it is though, I had a class like this and I think this is what I said.

Answer:

University of California

Explanation:

I just looked it up and the sights were saying California

Who is better Technoblade or Dream?

Answers

Techno. Dream stand just adore him. However both are great.

Answer:

technoblade

Explanation:

IM a stan and if you want i can give reasons why he is better UvU

Which option identifies what engineers will do to help in the following scenario?
After an explosion on an offshore drilling rig, engineers were called in to take action.


A) Engineers will work to design a rig that will not allow methane to escape and cause fires.

B)Engineers will create a large container to keep the flowing petroleum from entering the water.

C)Engineers will expand the drilling to divert the methane gas.

D)Engineers will work to design a system that will cap off the pipeline and stop the flow of petroleum.

Answers

Answer:

D is Correct

Explanation:

D) Engineers will work to design a system that will cap off the pipeline and stop the flow of petroleum.

In the scenario given, an explosion has occurred on an offshore drilling rig, indicating that there has been a catastrophic failure in the system. The first priority in such a situation would be to contain and stop the flow of petroleum to prevent further damage to the environment and ensure safety.

Engineers would be called in to take immediate action and design a system that will cap off the pipeline and stop the flow of petroleum. This might involve designing and installing valves or other mechanical devices that can shut off the flow of petroleum.

Option A is incorrect because preventing methane from escaping and causing fires is not the immediate priority in this situation. Option B is also incorrect because the immediate priority is to stop the flow of petroleum, not to contain it. Option C is not a feasible solution as diverting methane gas would not address the immediate issue of stopping the flow of petroleum.

Engineers will work to design a rig that will not allow methane to escape and cause fires. Thus, the correct option is A.

Thus, An engineer solves issues using math, science, and technology. Engineering is all around us, enhancing the ways that we work, travel, communicate, maintain our health, and have fun.

Engineers transform scientific information into technology, which they subsequently transform into a practical solution or innovation.

All engineers experience a sense of pride and well-being after successfully completing a challenging assignment. Making, designing, and manufacturing valuable goods and services for other people is a career that will enrich your life.

Thus, The ideal option is A.

Learn more about Engineer, refer to the link:

https://brainly.com/question/19117846

#SPJ1

A species that lives in every biome and is easy to track and count is best used as

Answers

Answer:

Indicator species- Environmental indicators

Explanation:

Indicator species are those animals ,plants or micro-organisms that can be used to monitor changes in our environment. They can show how an ecosystem is responding to effects of pollution and tell us the results of how well the efforts applied to restore the ecosystem are continuing. Environmental indicators such as birds live in every climate and biome, respond quick to changes in their environment and can be easily tracked and counted.

Wear Bars appear when the tread is down to what depth?

Answers

Answer:

Two thirty seconds of an inch : 2/32"

Explanation:

Wear bars are tread wear indicators on tires located at the base of the main grooves and equally spaced around a tire. They look like narrow strips of smooth rubber across the tread and appear on the tire when the point is reached. The wear bars are an indication that the tire is worn out and needs to be replaced.

Select the four parts of the plasma system that

are continuously monitored. (Select four that apply.)

Pressure

Oxygen

Power

Temperature

Cup

Fuel

Answers

Answer:

Power

pressure

cup

Temperature

Explanation:

The four parts of the plasma system that are continuously monitored are Pressure, Power, Temperature and Cup.

What is plasma system?

Plasma system is defined as a system eliminates gas that has been adsorbed to powder surface. The foundation of plasma technology is a straightforward physical idea. When energy is applied to matter, solids become liquids, and liquids turn into gaseous states. A gas is ionized and enters the energy-rich plasma state, the fourth state of matter, if yet more energy is applied to it.

The same methods used to clean vacuum systems are used to clean plasma systems. Wherever practical, removable shields and liners ought to be used. Particulates produced by vapor phase nucleation, arcing, and flaking may be produced in significant quantities in plasma systems used for PVD processing.

Thus, the four parts of the plasma system that are continuously monitored are Pressure, Power, Temperature and Cup.

To learn more about plasma system, refer to the link below:

https://brainly.com/question/10083364

#SPJ5

In modern gasoline injection systems, where does the fuel injector spray gasoline ?

Answers

Answer:

tube

Explanation:

4. A voltage of 120 volts is applied to a 200 Ω resistor. Calculate the current through the resistor.

Answers

Answer: 0.1

Explanation:

Answer:

The current is 0.6 or 3/5 Amps

Given:

V (voltage) = 120 volts

R (resistance) = 200 ohms

I (current) = ?

Formula:

Solution:

Therefore, the current is 0.6 or 3/5 Amps

What characteristics are common to public schools? Check all that apply. require tuition to attend run by a non-government group free to students through grade 12 higher tuition than a private school run by the government funded by the government

Answers

Answer:

c, e, f.

Explanation:

I took the test

The characteristics that are common to public schools, are free to students through grade 12, run by the government, funded by the government. The correct options are B, C, and D.

What are public schools?

A public school is one that is supported by the government through taxes. Attending a primary or secondary public school is free for all students.

A more educated population has lower unemployment, lower reliance on government assistance programs, and higher tax revenue.

Education is also important in reducing crime, improving public health, and increasing political and civic engagement.

A private school is self-sufficient and generates its own funding from sources such as student tuition, private grants, and endowments. A public school is funded by the government, and all students attend for free.

The characteristics that are shared by public schools are that they are free for students up to grade 12, are run by the government, and are funded by the government.

Thus, B, C, and D are correct options.

For more details regarding public schools, visit:

https://brainly.com/question/11340401

#SPJ2

What are the coordinates of the centroid of a triangle with vertices A(−6, 0), B(−4, 4), and C(0, 2)?



Enter your answers in the boxes.

Answers

Answer:

The required co-ordinates of the centroid are  (-10/3,2)

Step-by-step explanation:  We are to find the coordinates of the centroid of a triangle with vertices A(−6, 0) , B(−4, 4) , and C(0, 2).

We know that

the co-ordinates of the centroid of a triangle with vertices (a, b), (c, d) and (e, f) are given by

((a+c+e)/3,(b+d+f)/3)

Therefore, the co-ordinates of the centroid of triangle ABC are  (-10/3,2)

Thus, the required co-ordinates of the centroid are (-10/3,2)

Explanation:

The coordinates of the centroid of a triangle with vertices A(−6, 0), B(−4, 4), and C(0, 2) are (-10/3,2).

What are coordinates?

Coordinates are defined as a pair of numbers that use the horizontal and vertical separations from the two reference axes to define a point's location on a coordinate plane. A coordinate system is a framework for specifying the relative positions of objects inside a specific area, such as a region on the surface of the earth or the entire surface of the world.

We must determine the centroid's coordinates for a triangle whose vertices are A(6, 0), B(4, 4), and C. (0, 2).

We are aware that [(a + c + e) / 3,(b + d + f)] gives the coordinates of the centroid of a triangle with the vertices (a, b), (c, d), and (e, f).

Thus. the coordinates of the centroid of a triangle with vertices A(−6, 0), B(−4, 4), and C(0, 2) are (-10/3,2).

To learn more about coordinates, refer to the link below:

https://brainly.com/question/27749090

#SPJ2

Name three things you can find with a level in construction and explain why they are Important ​

Answers

Answer:

Construction Management is a Huge Job :

As a part of your construction manager training, you will need to know how to take control of the entire project.

Compliance is Required :

Every state has certain rules that need to be adhered to if the project is to be carried through properly.

Managing Employees Can Be Difficult

When you are a basic construction worker with the yellow hat that we mentioned, you are only responsible for yourself.

Explanation:

Drag each label to the correct location on the table. Match to identify permanent and temporary structures.

Answers

Answer:

Permanent Structures:

Motel

Mall

Refinery

Temporary Structures:

Kiosk

Marquee

Exhibition Stand

Explanation: Got a 100 percent on the test

Solve Problem 1 on a cold air-standard basis with specific heats evaluated at
300 K.

1. An air-standard Otto cycle has a compression ratio of 9. At the beginning of
compression, 1 = 100 kPa and 1 = 300 K. The heat addition per unit mass
of air is 1350 kJ/kg. Determine
(a) the net work, in kJ per kg of air.
(b) the thermal efficiency of the cycle.
(c) The mean effective pressure, in kPa.
(d) The maximum temperature in the cycle, in K.

Answers

Answer:

(a) 774.529 kJ/kg

(b) Approximately 61.2%

(c) 96.816 kPa

(d) The maximum in the cycle temperature is 2655.3 K

Explanation:

(a)The temperature T₂ = T₁ × r^(k - 1)

∴ T₂ = 300 × 9^(1.4 - 1) = 772.467 K

P₂ = P₁×r×T₂/T₁ = 100 × 8 × 772.467/300 = 2059.912 kPa

W₁₂ = Cv × (T₁ - T₂) = 0.717*(300 - 772.467) ≈ -338.76 kJ/kg

The heat added = q₂₃ = 1350 kJ/kg = Cv × (T₃ - T₂) = 0.717*(T₃- 772.467)

1350/0.717 = T₃- 772.467

T₃ = 1350/0.717 + 772.467 = 2655.3 K

T₄ = T₃ × (1/r)^(k - 1) = 2655.3  × (1/9)^(1.4 - 1) = 1102.596 K

W₃₄ = Cv×(T₃ - T₄) = 0.717 × (2655.3 - 1102.596) ≈ 1113.289 kJ/kg

The net work = W₁₂ + W₃₄ = -338.76  + 1113.289 = 774.529 kJ/kg

(b) The thermal efficiency, [tex]\eta _{th}[/tex] = 1 - T₁/T₂ = (1 - 300/772.467) × 100 ≈ 61.2%

(c) The Mean Effective Pressure, MEP = (Net work)/Displacement Volume)

For unity clearance, volume, we have;

MEP = 774.529/(9 - 1) = 96.816 kPa

(d) The maximum temperature, occur at T₃ = 2655.3 K.

Roundabouts have significantly lower crash and fatality rates than intersections.
O True
O False

Answers

Answer:

True

Explanation:

Apparently roundabouts reduce injury crashes by about 75%

Scale drawings provide an engineer with the opportunity to explore different aspects of a design.


True

False

Answers

The correct answer is True.

Answer:

True

Explanation:

Force is the cause of a velocity change

Answers

The answer is true. hope this helped

Answer:

Forces affect how objects move. They may cause motion; they may also slow, stop, or change the direction of motion of an object that is already moving. Since force cause changes in the speed or direction of an object, we can say that forces cause changes in velocity. Remember that acceleration is a change in velocity

Other Questions
According to Joshua Drake, how much did children get paid each week in todayswages ? * Identify the person and number of the verb below.I swim.First personSecond personThird personSingularPlural Challenges of the cottage industry included A. purchasing expensive equipment B. physical demands related to equipment C. all of the above identify one consequence for damaging someone else's property in Babylonia. Please help somebody Would this be true or false the question is The hexagon represents 1 whole. True or False: The pattern-block diagram below represents the equation True or False: The pattern-block diagram below represents the equation LaTeX: 4\cdot\frac{1}{3}=1\frac{1}{3}4 1 3 = 1 1 3Hopefully you can see the picture. Sorry for this wired stuff. the answer is below PLEASE HELP IM BEING TIMED I WILL MARK BRAINLIEST IF RIGHT Find the difference of -3/5 - (-5/9)20 points y'allthanks-Throckmorton Answer pleaseeee??? Thanks which statement is the most likely conclusion you can draw from the cause-and-effect relationship shown in the diagram? CREATE A TIMELINE OF EVENTS FROM THE TREATY OF PARIS 1763,ENDING THE FRENCH AND INDIAN WAR, TO THE WRITIING OF DECLARATION OF INDEPENDENCE IN 1776. 5 cm4 cm6 cm3D rectangle Hoa sells vacuum cleaners. She earns a $500 weekly salary in addition to $40 for each vacuum cleaner sold. Write a linear equation to represent her weekly pay based on the number of vacuum cleaners she sells. Are you relieved that you don't have to fight during the Vietnam war? explain 2 sentence The most important reason for the failure of the Munich Putsch was Hitler's poor leadership.How far do you agree?You may use the following in your answer:. Hitler's poor leadership. The German army will mark brainliest!! Rectangle A measures 9 inches by 3 inches. Rectangle B is a scaled copy of rectangle A. Select all of the measurement pairs that could be the dimensions of rectangle BA. 4.5 inches by 1.5B. 8 inches by 2 inchesC. 10 inches by 4 inchesD. 13.5 inches by 4.5 inchesE. 90 inches by 30 inches Three chairs were rolling across a flat office floor. The blue and red chairs are the same mass, and they have more mass than the yellow chair. Each chair was hit by another chair, but not from the same direction. Use the information in the diagram to answer.Which chair(s) experienced the strongest force when hit? How do you know?aThe blue and red chairs experienced the strongest force because they are both more massive than the yellow chair and they changed speed by the same amount.bThe red chair experienced the strongest force because it is as massive as the blue chair and has the highest ending speed.cAll three chairs experienced the same force because they changed speed by the same amount.dThe blue chair experienced the strongest force because it takes more force to slow an object than it takes to make it go faster. 2-X = 27, what is X? 3 2. What is Whitman saying about each small, discrete element of nature?