Answer:
0.67 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{0.8}{1.2} \\ = 0.666666...[/tex]
We have the final answer as
0.67 m/s²Hope this helps you
True or False: Solar energy drives winds around the globe as warm water and land heat the air.
Answer:
False
Explanation:
What is the mass of an object which has a momentum of 560 kg m/s and is traveling at 15 m/s?
Answer:
plane
Explanation:
a camel can walk easily on sandy desert but a horse cannot, why?
plz anyone tell
Answer:
I believe the camels hooves or whatever are built diffrenet.
Explanation:
6. List three behaviors of light that support the theory that light travels in waves.
Then describe and/or draw each behavior.
Answer:
Light has the unique property that it can be described in physics as both a wave and as a stream of particles called photons
Explanation:
Answer:
Light has the unique property that it can be described in physics as both a wave and as a stream of particles called photons
Explanation:
Warm 12 grams of water from 98 degrees Celsius to 99 degrees Celsius
Answer:
E=mc△T
E=0.012(4200)(99-98)
E=50.4J
50.4 joules of heat is used
How much work is done when a 100 N force moves a block 59 m?
Answer:
5900J
Explanation:
Work=Forse*Distance
work = J, Jewls
100*59=5900
Hop this helps and can u think about brainlist
i put a picture on how to find these answers, if u got any more questions im here
What are the types of motion that can be observed in a pendulum ? Some one please answer.√
Answer:
periodic motion
Explanation:
The massive object is affectionately referred to as the pendulum bob. When the bob is displaced from equilibrium and then released, it begins its back and forth vibration about its fixed equilibrium position. The motion is regular and repeating, an example of periodic motion.
no wrong answers please
WORTH 50 POINTSSSS!!!!!!!! don't lie either if you do I will report your answer and get my points back idc !!!!!!
This political cartoon summarizes proposed legislation to stop immigration into the United States through the use of
A. Income
B. Military force
C. Building a barrier wall
D. Educational requirements
Answer:
C is the correct answer and i hope ur having a good day UwU
Explanation:
When an old building is to be torn down, Mr. Pham’s company removes the bricks, cleans off the mortar from the bricks, and then sells the bricks to companies that restore historic buildings. Which compound is Mr. Pham’s company most likely to use in its work?
hydrochloric acid
nitric acid
sodium hydroxide
lithium hydroxide
Answer:
hydrochloric acid
Explanation:
The compound Mr. Pham's company used is most likely hydrochloric acid.
Hydrochloric acid is a strong acid and it is applied to remove corrosion and rusts from another body.
For industrial purposes, they are used as cleansing agents.The acid is capable of dissolving and breaking down the rust and corrosion.
A base does not have this property and would not effectively remove the corrosion.
Sodium hydroxide and lithium hydroxide are bases.
Nitric acid is not as strong as hydrochloric acid.
Answer:
hydrochloric acid
Explanation:
i just did the test 3 minutes ago.
hope this helps and have a good day.
:)
4. A 5.00-kg sled starts at rest and accelerates down a 45.0° incline. The coefficient of
kinetic friction between the mass and the incline is .185.
a) What is the value of the of the acceleration of the sled
Answer: [tex]5.64\ m/s^2[/tex]
Explanation:
Given
mass of sled m=5 kg
Elevation [tex]\theta =45^{\circ}[/tex]
[tex]\mu _k=0.185[/tex] (coefficient of kinetic friction)
Friction will oppose the motion of the sled while sled weight sin component helps it to move down the incline
[tex]W\sin\theta-F_r=ma\\where\\W=weight(mg)\\F_r=Friction(\mu_kmg\cos\theta)\\a=acceleration[/tex]
Substituting values
[tex]mg\sin \theta-\mu_kmgcos\theta=ma\\g\sin \theta-\mu_kg\cos \theta=a\\a=g(\sin 45^{\circ}-0.185\times \cos 45^{\circ})\\a=5.64\ m/s^2[/tex]
TRUE OR FALSE: some rays of light carry radiation.
Answer:
true
Explanation:
Answer:
True
Explanation:
What is the resultant of the vectors shown?
Answer:
b
Explanation:
your welcome :)
A seismograph measures
a.
how much the surface of Earth moves during an earthquake.
b.
the speed of S waves.
c.
the force of the earthquake.
d.
the location of the epicenter.
PLZZZ HELP
In addition to how much force Earth exerts on the object, which features of an object affect its weight?
A.mass and location of the object
B.shape and location of the object
C.location of the object and how much energy the object has
D.mass of the object and how much energy the object has
Answer/Explanation:
The weight of an object is defined as the force that is exerted due to the gravitational force.
Mathematically, it can be written as :
W = m g
Where
m is the mass of the object
g is the acceleration due to gravity
Also,
We know that the value of g varies with respect to the location. At the equator, the value of g is less as compared to the poles.
The feature of an object that affects its weight are :
Mass of the object
Location of the object
How much force Earth exerts on the object
What is the composition of DNA? (What are the parts of a DNA molecule)
Answer:
In DNA, the pyrimidines are thymine and cytosine; the purines are adenine and guanine. Both strands of double-stranded DNA store the same biological ...
Explanation:
hope it helps
A laser beam is directed at the Moon, 380,000 km from the Earth. The beam diverges at an angle of \thetaθ of 0.8 x 10-5 rad. What diameter spot, in m, will it make on the Moon?
Answer:
3040 m
Explanation:
The formula to apply here is ;
d=∅*r where
d is the diameter of the spot , ?
∅ is angle of divergence in radians, = 0.8 * 10⁻⁵rad
r is distance of Moon from Earth, =380,000 km
Applying the formula as;
d=∅*r
d= {0.8 *10⁻⁵} * 380,000 * 1000
d= 3040 m
Pleaaaase help meeee
Read the following case and discuss how you would respond to the situation.
PROBLEM:
You have been assigned the position of Environmental Engineer for one of several local
robotics manufacturers whose water discharges flow into a lake in a flourishing tourist area.
Although all the robotics companies in the area are marginally profitable, they compete for
the same customers. Included in your responsibilities is the monitoring of water and air
discharges
at your plant and the periodic preparation of reports to be submitted to the Department of
Natural Resources. You have just prepared a report that indicates that the
level of pollution in the plant's water discharges slightly exceeds the legal limitations. Your
boss, the Plant Manager, says you should regard the excess as a mere
"technicality," and he asks you to "adjust" the data so that the plant appears to be in
compliance. He says that the slight excess is not going to endanger human or fish
life any more than if the plant were in compliance. On the other hand, he says, solving the
problem would require a very heavy investment in new equipment. He
explains, "We can't afford new equipment. It might even cost a few jobs. It will set us
behind our competitors. Besides the bad publicity we'd get, it might scare off
some of the tourist industry, making it worse for everybody."
1) How do you think you should respond to your boss's request? Explain :
2) Define the problem :
3) what are the possible results of decision?
4) is there any information about the situation that is not obvious or available in the paragraph?
5) what are the ethical issues to consider in this situation
6) How did you decide to handle the situation what did you decide to do?
Answer:
3
Explanation:
1. Place these unknown pH test papers in order from most acidic to most alkaline.
А в
C D
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
pH color chart
A. Paper D. paper C, paper B, paper A
B. Paper B, paper A, paper C, paper D
C. Paper C, paper D, paper A, paper B
D. Paper D, paper C, paper A, paper B
Answer: B
Explanation: look at the chart, easy
Answer:
D
Explanation:
5) A car travels 150 km in 2 hours. What is its speed?
(Show the correct units.)
Answer:
75km/hr
Explanation:
distance(d)=150km
time(t)=2hours
speed=distance/time
=150/2
=75km/hr
Pls Solve this!!!Im giving 20 points and Brainliest to the one who answers first. HELP ME PLEASE!!!!!!!!
Answer:
i) 2Mg + O₂ + Δ Heat → 2MgO + Δ Energy
ii) The aqueous solution does not change in the color of the blue litmus paper and the blue litmus paper remains blue in color
The aqueous solution formed using the product (MgO) turns the red litmus paper blue
Explanation:
i) Magnesium easily burns in air or oxygen when heated to form a white powder of magnesium oxide. The burning (reaction) of magnesium in air is an exothermic reaction that involves the release of heat and light
The burning of magnesium wire is given by the following chemical reaction;
2Mg + O₂ + Δ Heat → 2MgO + Δ Energy
ii) When magnesium oxide is mixed with water if forms magnesium hydroxide Mg(OH)₂ as shown in the following chemical reaction;
MgO + H₂O → Mg(OH)₂
Magnesium hydroxide is basic and therefore it will turn red litmus paper blue and it does not change the color of the blue litmus paper.
After completing an experiment, all chemical wastes should be
Answer:
The correct answer is
C. disposed of according to your instructor’s directions
Explanation:
The question is not complete here is the complete one with options to choose from
After completing an experiment, all chemical wastes should be
A. taken home
B. dumped in the sink
C. disposed of according to your instructor’s directions
D. left at your lab station for the next class
PLEASE ANSWER FAST
Calculate the density of an object with a mass of 15.6 grams and a volume of 2 cm3
Given :
Mass of object, m = 15.6 grams.
Volume of object, V = 2 cm³.
To Find :
The density of the object.
Solution :
We know, density of an object is given by :
[tex]\rho = \dfrac{m}{V}\\\\\rho = \dfrac{15.6}{2}\ grams/cm^3\\\\\rho = 7.8\ grams/cm^3[/tex]
Hence, this is the required solution.
Transfer of charge by touching is called... induction or conduction?
Answer:
Transfer of charge by touching is called conduction.
When a cricket ball is thrown vertically upwards, it reaches a maximum height of 15 metres. (a) What was the initial speed of the ball ? (b) How much time is taken by the ball to reach the highest point ? (g=10 ms -2
Answer:
The velocity of the cricket ball is 17.32 m/s
Time is taken by the ball to reach the highest point = 0.8660 seconds
Explanation:
The cricket ball can be seen and treated as a projectile in this case
The maximum height attained by a projectile in motion can be calculated using the formula:
[tex]h = \frac{v^2 sin^2 \theta }{2g}[/tex]
In any projectile problem, once we know see that the object was released vertically upwards, we need to know that this means that the angle of projection is 90 degrees, and sin 90 is = 1
hence, h will be modified to become
[tex]h = \frac{v^2 }{2g}[/tex]
[tex]v = \sqrt{2gh}[/tex]
We are given that h = 15m and g = 10m/s2
[tex]v = \sqrt{2 \times 10 \times 15} = 17.32m/s[/tex]
The velocity of the cricket ball is 17.32 m/s
B. We can get the time it took to reach the highest point by dividing
time = distance/speed
Time = 15/17.32 = 0.8660 seconds
why the spinner of a washing machine is made to spin at a very high speed
Answer:
Once rinsed, the inner drum starts to spin at high speed to remove any remaining water. This water goes out through the small holes in the inner drum into the outer drum before the pump removes any remaining water, and your clothes are ready to be taken out to dry
77. Two blocks, with masses m1 = 400 g and m2 = 600 g, are connected by a string and lie on a frictionless tabletop. A force F = 3.5 N is applied to block m2. Find the acceleration of each object.
Answer:
See the answers below. And the free body diagrams attached.
Explanation:
To solve this problem, we must build a free body diagram, where we show the forces acting on a body, first for the m2 body, where the force of 3.5 [N] acts to the right. In such a way that a reaction force is presented in the opposite direction due to the string tied between both bodies, we will call this force T1.
Now using Newton's second law, which is defined as the sum of forces equal to the product of mass by acceleration, we can determine an equation as a function of T1.
∑F = m*a
[tex]3.5 -T_{1}=0.6*a_{2}[/tex]
We have an equation with two unknowns, in such a way we must perform a second free body diagram for the body with mass m1, to acquire the additional equation.
∑F =m₁*a₁
[tex]T_{1}=0.4*a_{1}[/tex]
By kinematics we know that if the string tied to Body 2 moves a distance, the part of the string at the end tied to body 1 will move the same distance. This same analysis is valid for velocities and accelerations.
This is the accelerations a1 and a2 are equal. Now equalizing both equations.
[tex]3.5-0.4*a_{1}=0.6*a_{2}\\but\\a_{1}=a_{2}\\3.5-0.4*a_{1}=0.6*a_{1}\\a_{1}=3.5[m/s^{2} ][/tex]
The acceleration of each block connected by the given string is 3.5 m/s².
The given parameters;
mass of the first block, m1 = 400 g = 0.4 kgmass of the second block, m2 = 600 g = 0.6 kgapplied force, F = 3.5 NThe net force on the blocks is calculated as follows;
[tex]\Sigma F = ma\\\\F - T = m_2a\\\\F - m_1(a -g)= m_2a\\\\g = 0 \ , \ in \ horizontal \ direction\\\\F - m_1a = m_2 a\\\\F = m_2 a + m_1 a\\\\F = a(m_1 + m_2)\\\\a = \frac{F}{m_1 + m_2} \\\\a = \frac{3.5 }{0.4 + 0.6} \\\\a = 3.5 \ m/s^2[/tex]
Thus, the acceleration of each block connected by the given string is 3.5 m/s².
Learn more here:https://brainly.com/question/20357188
How does work affect energy between objects so it can cause a change in the form of energy?
Sol
Work transfers energy.
O Work changes energy
O Work increases energy.
O Work decreases energy.
Answer:
Doing work' is a way of transferring energy from one object to another, energy is transferred when a force moves through a distance.
Explanation: So more energy, more work done bc u transferred more energy to move the object and doing the work. and if you only use a little of energy, the work done also only a little.
Metamorphic rock occurs when you take any other type of rock and put them under ________ and ______________, and they twist and meld together.
Answer:
This question appear incomplete
Explanation:
This question appear incomplete because of the absence of options. However, metamorphic rocks are rocks that are formed from other pre-existing rocks under heat and pressure (both are usually high), causing them to twist and melt together. Metamorphism simply means a change in form of something and that's what happens here also.
Which type of wave forms at the boundary between air and water when you
drop a rock into a pond?
A. Electromagnetic
B. Surface
C. Longitudinal
D. Transverse